NOO-F0851-111FSN-2525-1-TDD

TECP-77-044 · Issue 9 · March 2015 D-620616-0-20 Rev K InterReach Fusion Wideband Installation, Operation, and Reference Manual Copyright © 2015 TE Connectivity, Inc. All Rights Reserved. Information contained in this document is company private to TE Connectivity Ltd., and shall not be modified, used, copied, reproduced or disclosed in whole or in part without the written consent of TE. Trademark Information TE Connectivity, TE and TE connectivity (logo) FlexWave, InterReach, InterReach Fusion and InterReach Unison are trademarks. All other logos, products and/or c ompany names referred to herein might be trademarks of their respective owners. Disclaimer of Liability The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity's obligations shall only be as set forth in TE Connectivity's Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. REVISION HISTORY ISSUEDATEREASON FOR CHANGE 17/2008First release 210/2008Add Fusion Wideband 1900/AWS product content 38/2009Add Fusion Wideband 700/AWS and 70 0 MI MO product content 45/2010Add Fusion Wideband 700 (Lower ABC) MIMO product content 59/2011Add Fusion Wideband 2600 MIMO product content 611/2012Add Fusion Wideband 700 ABC/AWS HP/AWS HP an d Fusio n Wideband 700 UC/AWS HP/AWS HP product content 711/2013Add Fusion Wideband 2100 HP/1800 HP and Fusion Wideband 850/1900 HP/AWP HP product content 87/2014Add Fusion Wideband 2100 HP/2600 HP product content 93/2015Add Fusion Wideband 2500/2500 product content. InterReach Fusion Wideband Installation, Operation, and Reference ManualPage iii TECP-77-044 • Issue 9 • March 2015©2015 TE Connectivity Ltd. TABLE OF CONTENTS Preface ______________________________________________________________________ 1 Purpose and Scope .................................................................................................................................................................. 2 Conventions Used in this Manual............................................................................................................................................. 3 Measurements ........................................................................................................................ ................................................... 3 Document Cautions and Notes................................................................................................................................................... 3 Document Fonts ...................................................................................................................... ................................................... 3 Related Publications ................................................................................................................................................................ 4 InterReach Fusion Wideband System Description ____________________________________ 5 System Overview ..................................................................................................................................................................... 5 Wireless Standards and Air Interface Protocols ......................................................................................................................... 6 Configurable Bands..................................................................................................................................................................... 6 Key System Features.................................................................................................................... ............................................... 6 System Hardware ....................................................................................................................................................................8 System OA&M Capabilities.................................................................................................................................................... 10 System Monitoring and Reporting ...................... ..................................................................................................................... 11 Using Alarm Contacts ............................................................................................................................................................... 12 System Connectivity .............................................................................................................................................................. 13 System Operation .................................................................................................................................................................. 14 System Specifications ............................................................................................................................................................ 15 RF End-to-End Performance................................................................................................................................................... 18 2100/1800 RAU (FSN-W1-2118-1).......................................................................................................... .................................. 18 2100 HP/1800 HP (FSN-W1-2118-1-HP) ................................................................................................................................... 19 2100 HP/2600 HP (FSN-W1-2126-1-…

Text truncated - open the document above for the full version.

FCC Compliance Opinion 2015-1-14 TECO0025 Information about the Applicant Grantee (Company Name) ADC Telecommunications FCC Contact Person Joshua Wittman Address 501 Shenandoah Drive City, State, Zip Shakopee, MN 55379 Job Number TECO0025 Model FSN-2525-1-TDD FCC ID NOO-F0851-111 Agent Approval Type Original Equipment Class B2I Part 20 Industrial Booster (CMRS) Rule Part Part 27 Overview The model FSN-2525-1-TDD, also named in test report as InterReach TM Fusion TDD- 2.5 GHz- RAU, is dual band remote antenna unit. It is part of the Fusion LS System. The main function of the FSN-2525-1-TDD is to receive and transmit signals from and to mobile units. Confidentiality requested for allowed files. Request is properly addressed and referenced. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature Dave Tolman, TCB Committee 3/26/2015

Mailing Address: 501 Shenandoah Drive, Shakopee, Minnesota 55379 www.te.com March 25, 2015 Attention: Reviewing Engineering Type of Certification: Original - FCC Part 27 Applicant: ADC Telecommunications Inc. Equipment: InterReach™ Fusion – 2.5 GHz TDD MIMO RAU Model #: FSN-2525-1-TDD FCC ID: NOO-F0851-111 Dear Sir/Madam: Enclosed please find a signed FR410 TCB Application for certification of the above mentioned RF module. Further details and supporting documents have been uploaded to the Northwest EMC CTS system. Should you have any questions, please feel free to contact the undersigned. Sincerely, Joshua J. Wittman Compliance Engineer Tele: 952 403-8322 Fax: 952 403-8858 Email: [email protected]

1(1) Attention: Application Examiner Re: Request for Confidentiality Applicant: ADC Telecommunications, Inc. FCC ID: NOO-F0851-111 To whom it may concern, Permanent Confidentiality Request is hereby submitted by ADC Telecommunications, Inc. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description Rationale for request for confidentiality: ADC Telecommunications, Inc. has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Sincerely, Joshua J. Wittman Compliance Engineer ADC Telecommunications, Inc.

External Photos Fusion 2.5 GHz TDD MIMO RAU (FSN-2525-1-TDD) FCC ID will be located here (see FCC label exhibit for details) Industrial Booster Label and Location

FCC ID will be located here (see FCC label exhibit for details) Industrial Booster Label and Location

Fusion 2.5 GHz TDD RAU Internal Pictures Top Side in Chassis Top Side (Shielded) Top Sided (unshielded) Top Right Side Top Left Side Bottom View Bottom Left Side Bottom Right Side

Mailing Address: 501 Shenandoah, Shakopee, Minnesota 55379 www.te.com March 25, 2015 Antenna Information Attention: Reviewing Engineering Type of Certification: Original - FCC Part 27 Applicant: ADC Telecommunications, Inc. Equipment: InterReach™ Fusion – 2.5 GHz TDD MIMO RAU Model #: FSN-2525-1-TDD FCC ID: NOO-F0851-111 Dear Sir/Madam: We, ADC Telecommunications, Inc. do not manufacture or distribute any antennas to our customers for their deployments. The customer provides their own. Dipole and omni antennas with a typical gain of 3dBi will be used with this product. Further details and supporting documents have been uploaded to the Northwest EMC CTS system. Should you have any questions, please feel free to contact the undersigned. Sincerely, Joshua J. Wittman Compliance Engineer Tele: 952 403-8322 Fax: 952 403-8858 Email: [email protected]

Mailing Address: 501 Shenandoah, Shakopee, Minnesota 55379 www.te.com March 25, 2015 Attn: Application Examiner, Reviewing Engineer Re: Tune-up Procedure The InterReach Fusion ® 2.5 GHz TDD MIMO Remote Access Unit model number FSN-2525- 1-HP employs a solid-state design that does not require a tune-up procedure. Sincerely, Joshua J. Wittman Compliance Engineer ADC Telecommunications 1187 Park Place Shakopee, MN 55379 952-403-8322 [email protected]

Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101 World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com March 25, 2015 Attn: Application Examiner, Reviewing Engineer Re: RF Exposure Statement The antenna(s) used for this transmitter must be fixed-mounted on (indoor) structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 47 CFR 1.1307 (b)(3) Sincerely, Joshua J. Wittman Compliance Engineer Tele: 952 403-8322 Fax: 952 403-8858 Email: [email protected]

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. This Report may only be duplicated in its entirety TE Connectivity / ADC Telecommunications InterReach Fusion TDD - 2.5 GHz -RAU FCC 27:2015 Report # TECO0025 NVLAP Lab Code: 200881-0 CERTIFICATE OF TEST 2014-12-10 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Last Date of Test: March 6, 2015 TE Connectivity / ADC Telecommunications Model: InterReach Fusion TDD - 2.5 GHz -RAU Radio Equipment Testing Standards Specification Method FCC 27:2015, FCC 2.1046 ANSI/TIA/EIA-603-C-2004 FCC 27:2015, FCC 2.1049 FCC 27:2015, FCC 2.1051 FCC 27:2015, FCC 2.1053 FCC 27:2015, FCC 2.1055 Results Test Description Applied Results Comments Equivalent Isotropic Radiated Power (EIRP) Yes Pass Emissions Bandwidth Yes Pass Spurious Conducted Emissions Yes Pass Band Edge Compliance Yes Pass Intermodulation Yes Pass Frequency Stability Yes Pass Field Strength of Spurious Emissions Yes Pass Deviations From Test Standards None Approved By: Tim O'Shea, Operations Manager Report No. TECO00252/57 REVISION HISTORY REV 2014.10.14 Revision Number Description Date Page Number 00 None Report No. TECO00253/57 ACCREDITATIONS AND AUTHORIZATIONS REV 2015.2.19 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Northwest EMC to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada IC - Recognized by Industry Canada as a Certification Body (CB). Certification chambers and Open Area Test Sites are filed with IC. European Union European Commission – Validated by the European Commission as a Conformity Assessment Body (CAB) under the EMC directive and as a Notified Body under the R&TTE Directive. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIP / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/accreditations/ http://gsi.nist.gov/global/docs/cabs/designations.html Report No. TECO00254/57 MEASUREMENT UNCERTAINTY TMU.2014.12.03 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. Measurement uncertainty is a statistical expression of measurement error qualified by a probability distribution. A measurement uncertainty estimation has been performed for each test per our internal quality document WP 342. The estimation is used to compare the measured result with its "true" or theoretically correct value. The expanded measurement uncertainty (K=2) for each test is on each data sheet. Our measurement data meets or exceeds the measurement uncertainty requirements of the applicable specification; therefore, the test data can be compared directly to the specification limit to determine compliance. The calculations for estimating measurement uncertainty are based upon ETSI TR 100 028 (or CISPR 16-4-2 as applicable), and are available upon request. The following table represents the Measurement Uncertainty (MU) budgets for each of the tests that may be contained in this report. Test + MU - MU Frequency Accuracy (Hz) 0.0007% -0.0007% Amplitude Accuracy (dB) 1.2 dB -1.2 dB Conducted Power (dB) 0.3 dB -0.3 dB Radiated Power via Substitution (dB) 0.7 dB -0.7 dB Temperature (degrees C) 0.7°C -0.7°C Humidity (% RH) 2.5% RH -2.5% RH Voltage (AC) 1.0% -1.0% Voltage (DC) 0.7% -0.7% Field Strength (dB) 4.7 dB -4.7 dB AC Powerline Conducted Emissions (dB) 2.9 dB -2.9 dB Report No. TECO00255/57 FACILITIES REV 2015.2.19 California Labs OC01-13 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-08, MN10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 New York Labs NY01-04 4939 Jordan Rd. Elbridge, NY 13060 (315) 554-8214 Oregon Labs EV01-12 22975 NW Evergreen Pkwy Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 9801 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200761-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Industry Canada 2834B-1, 2834B-3 2834E-1 N/A 2834D-1, 2834D-2 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R N/A SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 N/A A-0108 A-0201 A-0110 Recognized Phase I CAB for ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 N/A US0017 US0191 US0157 Report No. TECO00256/57 PRODUCT DESCRIPTION 2014-12-10 Client and Equipment Under Test (EUT) In…

Text truncated - open the document above for the full version.

XMit 2015.01.14 OP 001.jpg OP 002.jpg EQUIVALENT ISOTROPIC RADTIATED POWER (EIRP) XMit 2015.01.14 1 PORT 001.jpg OP 001.jpg EMISSIONS BANDWIDTH XMit 2015.01.14 1 PORT 001.jpg OP 001.jpg SPURIOUS CONDUCTED EMISSIONS XMit 2015.01.14 1 PORT 001.jpg OP 001.jpg BAND EDGE COMPLIANCE XMit 2015.01.14 1 PORT 001.jpg IM 001.jpg INTERMODULATION XMit 2015.01.14 FSB 001.jpg FREQUENCY STABILITY photo SE 001.jpg SE 002.jpg FIELD STRENGTH OF SPURIOUS EMISSIONS PSA-ESCI 2015.01.16 photo SE 003.jpg SE 004.jpg FIELD STRENGTH OF SPURIOUS EMISSIONS PSA-ESCI 2015.01.16