NS912XBG24-30MiniPCI BG 1W 2.4GHz

Features • IEEE 802.11 b/g standard compliant • Output Power of up to 30dBm @ b/g Band with built-in ESD Protection • RF ESD/EMP Immunity Threshold: 15KeV ① • Supports Atheros Proprietary "Super Mode" deliverin g up to 108 Mbps data link rate • Transmission Power Control (IEEE 802.11h TPC) • Extended distances and high performance due to optimized output signal power • Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard) • Single MMCX antenna connector allowin g for improved mechanical stability and low loss • Ideal for long-distance, outdoor broadband wireless applications MiniPCI BG 1W 2.4GHz XBG24-30 TECHNICAL SPECIFICATIONS Chipset Atheros 2414 Host Interface PCI Interface v2.3 (Type III-B Mini PCI form factor) Operating Voltage 3.3 VDC 11b Cont. [email protected] 5.0W 11g Cont. Tx@6M 5.5W 11g Cont. Rx 2.5W Power Consumption Standby 1.5W Antenna Connector 1×MMCX (main) IEEE 802.11b： 11Mbps 5.5 Mbps 2 Mbps 1 Mbps IEEE 802.11g: 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps Data Rates Super-G: 108Mbps 96Mbps 72Mbps 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 6Mbps 2.412GHz ~ 2.462GHz (US & Canada) 2.412GHz ~ 2.472GHz (Europe) Frequency Range IEEE 802.11b/g: 2.412GHz ~ 2.484GHz (Japan) Modulation Techniques OFMD: BPSK, QPSK, 16-QAM, 64-QAM DSSS: DBPSK, DQPSK, CCK Certification FCC RoHS Compliance Yes Temperature Range Operating: -20ºC to 70ºC Storage: -40 ºC to 90 ºC Humidity Operating: 5% to 95% (non-condensing) Storage: Max.90% (non-condensing) Dimensions 64.3 mm x 47 mm x 14 mm XBG24-30 MINIPCI CARD RADIO SPECIFICATIONS TX SPECIFICATIONS RX SPECIFICATIONS DataRate TX Power Tolerance DataRateSensitivity Tolerance 1Mbps 30dBm +1.0/-1.5 dB 1Mbps -96dBm ±2dB 2Mbps 30dBm +1.0/-1.5 dB 2Mbps -93dBm ±2dB 5.5Mbps 30dBm +1.0/-1.5 dB 5.5Mbps -91dBm ±2dB 802.11b 11Mbps 30dBm +1.0/-1.5 dB 802.11b 11Mbps -90dBm ±2dB 6Mbps 30dBm +1.0/-1.5 dB 6Mbps -93dBm ±2dB 9Mbps 30dBm +1.0/-1.5 dB 9Mbps -90dBm ±2dB 12Mbps 30dBm +1.0/-1.5 dB 12Mbps -89dBm ±2dB 18Mbps 30dBm +1.0/-1.5 dB 18Mbps -87dBm ±2dB 24Mbps 30dBm +1.0/-1.5 dB 24Mbps -84dBm ±2dB 36Mbps 28dBm +1.0/-1.5 dB 36Mbps -80dBm ±2dB 48Mbps 27dBm +1.0/-1.5 dB 48Mbps -76dBm ±2dB 802.11g 54Mbps 25dBm +1.0/-1.5 dB 802.11g 54Mbps -74dBm ±2dB ESD CABLE SPECIFICATIONS Physical Dimensions 26cm length Terminal Material Copper Attachment Procedure End of ESD Cable tied to Earth Ground ORDERING INFORMATION ② CODES SPEED Carton Dimensions XBG24-30 Up to 108 Mbps For 50pcs (pcs/ctn), 0.40m * 0.22m * 0.085m / 0.006 = 1.5KG ① Comes with grounding cable ② Configurations are subject to change without notice DIMENSIONS DRAWING Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution: (1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. (3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: (1) This device is approved for OEM installation with specified antennas as listed in this Manual. It is the responsibility of the Installer to comply with the separation distance for satisfying RF exposure compliance. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. IC Radiation Exposure Statement for Canada: This device complies with Industry Canada licence-exempt RSS standard(s). Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. (1) the modules FCC ID is notvisible when installed in the host, or (2) if the host is marketed so that end users do not havestraightforward commonly used methods for access to remove the module so that the FCC ID ofthe module is visible; then an additional permanent label referring to the enclosed module:Contains Transmitter Module…

Text truncated - open the document above for the full version.

Module approval cover letter I: The module have its own RF shielding II: The module must buffered modulation/data inputs III: The module have its own power supply regulation IV: The module have its own antenna V: The module is tested in a stand-alone configuration . VI: The module labeled with its permanently affixed FCC ID; VII: The module comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee; VIII: The module comply with RF exposure requirements Sincerely,

(1) EUT Photo (2) EUT Photo Report No: 123S103R-RF-US-P05V01 Page: 2 of 2 (3) EUT Photo

SYSTEMS INC. microhardmicrohard XBG24-30 MiniPCI BG 1W 2.4GHz FCC ID: NS912XBG24-30 IC: 3143A-12XBG2430 RoHS PN: MHS164500 This device complies with FCC Part 15 and IC RSS210. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may cause undesired operation. MAC: Label location

(1) EUT Photo (2) EUT Photo

RF Exposure Evaluation Declaration Product Name : MiniPCI BG 1W 2.4GHz Model No. : XBG24-30 FCC ID : NS912XBG24-30 IC : 3143A-12XBG2430 Applicant : Microhard Systems Inc. Address : 150 Country Hills Landing NW Calgary Alberta Canada T3K 5P3 Date of Receipt : 29/03/2012 Issued Date : 06/04/2012 Report No. : 123S103R-RF-US Report Version : V1.1 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, CNAS or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No: 123S103R-RF-US Page: 2 of 6 Test Report Certification Issued Date : 06/04/2012 Report No. : 123S103R-RF-US Product Name : MiniPCI BG 1W 2.4GHz Applicant : Microhard Systems Inc. Address : 150 Country Hills Landing NW Calgary Alberta Canada T3K 5P3 Manufacturer : Microhard Systems Inc. Address : 150 Country Hills Landing NW Calgary Alberta Canada T3K 5P3 Model No. : XBG24-30 FCC ID : NS912XBG24-30 IC : 3143A-12XBG2430 EUT Voltage : DC 3.3V Trade Name : Microhard Applicable Standard : FCC OET 65 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392; IC Lab Code: 4075B Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Jame Yuan) Approved By : (Engineering Manager: Marlin Chen) Report No: 123S103R-RF-US Page: 3 of 6 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site :http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI China :CNAS Report No: 123S103R-RF-US Page: 4 of 6 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No: 123S103R-RF-US Page: 5 of 6 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : MiniPCI BG 1W 2.4GHz Test Item : RF Exposure Evaluation Test Site : AC-4 Test Mode : Mode 1: Transmit by 802.11b Antenna Gain: Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.0dBi or 1.58 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 01 2412.00 711.2135 0.2242 06 2437.00 763.8358 0.2408 11 2462.00 731.1391 0.2305 Note: This copy report was based on Quietek report No: 089S060. Report No: 123S103R-RF-US Page: 6 of 6 Product : MiniPCI BG 1W 2.4GHz Test Item : RF Exposure Evaluation Test Site : AC-4 Test Mode : Mode 2: Transmit by 802.11g Antenna Gain: Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.0dBi or 1.58 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 01 2412.00 645.6542 0.2036 06 2437.00 855.0667 0.2696 11 2462.00 726.1060 0.2289 Note: This copy report was based on Quietek report No: 089S060.

Test Report Product Name : MiniPCI BG 1W 2.4GHz Model No. : XBG24-30 FCC ID : NS912XBG24-30 IC : 3143A-12XBG2430 Applicant : Microhard Systems Inc. Address : 150 Country Hills Landing NW Calgary Alberta Canada T3K 5P3 Date of Receipt : 29/03/2012 Issued Date : 10/04/2012 Report No. : 123S103R-RF-US-P05V01 Report Version : V1.2 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, CNAS or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No: 123S103R-RF-US-P05V01 Page: 2 of 120 Test Report Certification Issued Date : 10/04/2012 Report No. : 123S103R-RF-US-P05V01 Product Name : MiniPCI BG 1W 2.4GHz Applicant : Microhard Systems Inc. Address : 150 Country Hills Landing NW Calgary Alberta Canada T3K 5P3 Manufacturer : Microhard Systems Inc. Address : 150 Country Hills Landing NW Calgary Alberta Canada T3K 5P3 Model No. : XBG24-30 FCC ID : NS912XBG24-30 IC : 3143A-12XBG2430 EUT Voltage : DC 3.3V Trade Name : Microhard Applicable Standard : FCC CFR Title 47 Part 15 Subpart C: 2008 ANSI C63.4: 2009; ANSI C63.10: 2009 Industry Canada RSS-Gen Issue 3/RSS-210 Issue 8 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392; IC Lab Code: 4075B Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Jame Yuan) Approved By : (Engineering Manager: Marlin Chen) Report No: 123S103R-RF-US-P05V01 Page: 3 of 120 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site :http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI China :CNAS Report No: 123S103R-RF-US-P05V01 Page: 4 of 120 TABLE OF CONTENTS Description Page 1. General Information .......................................................................................................6 1.1. EUT Description .........................................................................................................6 1.2. Mode of Operation .....................................................................................................8 1.3. Tested System Details................................................................................................9 1.4. Configuration of Tested System ...............................................................................10 1.5. EUT Exercise Software ............................................................................................ 11 2. Technical Test ..............................................................................................................12 2.1. Summary of Test Result ...........................................................................................12 2.2. Test Environment.....................................................................................................14 3. Conducted Emission ....................................................................................................15 3.1. Test Equipment ........................................................................................................15 3.2. Test Setup ................................................................................................................15 3.3. Limit.... .....................................................................................................................16 3.4. Test Procedure.........................................................................................................16 3.5. Uncertainty ...............................................................................................................16 3.6. Test Result...............................................................................................................17 3.7. Test Photograph.......................................................................................................23 4. Radiated Emission.......................................................................................................24 4.1. Test Equipment ........................................................................................................24 4.2. Test Setup ................................................................................................................25 4.3. Limit.... ..................................................................................…

Text truncated - open the document above for the full version.

1.1. Test Photograph Test Mode : Mode 1: Transmit by 802.11b Description : Front View of Radiated Emission Test Setup for Under 1GHz Test Mode : Mode 1: Transmit by 802.11b Description : Back View of Radiated Emission Test Setup for Under 1GHz Test Mode : Mode 1: Transmit by 802.11b Description : Front View of Radiated Emission Test Setup for Above 1GHz Test Mode : Mode 1: Transmit by 802.11b Description : Back View of Radiated Emission Test Setup for Above 1GHz Test Mode : Mode 2: Transmit by 802.11g Description : Front View of Radiated Emission Test Setup for Under 1GHz Test Mode : Mode 2: Transmit by 802.11g Description : Back View of Radiated Emission Test Setup for Under 1GHz Test Mode : Mode 2: Transmit by 802.11g Description : Front View of Radiated Emission Test Setup for Above 1GHz Test Mode : Mode 2: Transmit by 802.11g Description : Back View of Radiated Emission Test Setup for Above 1GHz Test Mode: Mode 1: Transmit by 802.11b Description: Front View of Conducted Emission Test Setup Test Mode: Mode 1: Transmit by 802.11b Description: Back View of Conducted Emission Test Setup