NZI802168MobileMapper 20, WCDMA/GSM/GPS Portable Receiver

Getting Started Guide MobileMapper ® 20 Copyright Notice Copyright 2013 Trimble Navigation Limited. All rights reserved. Trademarks All product and brand names mentioned in this publication are trademarks of their respective holders. SPECTRA PRECISION LIMITED WARRANTY TERMS AND CONDITIONS PRODUCT LIMITED WARRANTY ‐ Subject to the following terms and conditions, Spectra Precision warrants that for a period of one (1) year from date of purchase this Spectra Precision product (the “Product”) will substantially conform to Spectra Precision’s publicly available specifications for the Product and that the hardware and any storage media components of the Product will be substantially free from defects in materials and workmanship. PRODUCT SOFTWARE ‐ Product software, whether built into hardware circuitry as firmware, provided as a standalone computer software product, embedded in flash memory, or stored on magnetic or other media, is licensed solely for use with or as an integral part of the Product and is not sold. If accompanied by a separate end user license agreement (“EULA”), use of any such software will be subject to the terms of such end user license agreement (including any differing limited warranty terms, exclusions, and limitations), which shall control over the terms and conditions set forth in this limited warranty. SOFTWARE FIXES ‐ During the limited warranty period you will be entitled to receive such Fixes to the Product software that Spectra Precision releases and makes commercially available and for which it does not charge separately, subject to the procedures for delivery to purchasers of Spectra Precision products generally. If you have purchased the Product from a Spectra Precision Authorized Distribution Partner rather than from Spectra Precision directly, Spectra Precision may, at its option, forward the software Fix to the Spectra Precision Authorized Distribution Partner for final distribution to you. Minor Updates, Major Upgrades, new products, or substantially new software releases, as identified by Spectra Precision, are expressly excluded from this update process and limited warranty. Receipt of software Fixes or other enhancements shall not serve to extend the limited warranty period. For purposes of this warranty the following definitions shall apply: (1) “Fix(es)” means an error correction or other update created to fix a previous software version that does not substantially conform to its Spectra Precision specifications; (2) “Minor Update” occurs when enhancements are made to current features in a software program; and (3) “Major Upgrade” occurs when significant new features are added to software, or when a new product containing new features replaces the further development of a current product line. Spectra Precision reserves the right to determine, in its sole discretion, what constitutes a Fix, Minor Update, or Major Upgrade. WARRANTY REMEDIES ‐ If the Spectra Precision Product fails during the warranty period for reasons covered by this limited warranty and you notify Spectra Precision of such failure during the warranty period, Spectra Precision will repair OR replace the nonconforming Product with new, equivalent to new, or reconditioned parts or Product, OR refund the Product purchase price paid by you, at Spectra Precision’s option, upon your return of the Product in accordance with Spectra Precision’s product return procedures then in effect. HOW TO OBTAIN WARRANTY SERVICE ‐ To obtain warranty service for the Product, please contact your local Spectra Precision Authorized Distribution Partner. Alternatively, you may contact Spectra Precision to request warranty service at +1‐303‐323‐4100 (24 hours a day) or e‐mail your request to [email protected]. Please be prepared to provide: • your name, address, and telephone numbers • proof of purchase • a copy of this Spectra Precision warranty • a description of the nonconforming Product including the model number • an explanation of the problem The customer service representative may need additional information from you depending on the nature of the problem. WARRANTY EXCLUSIONS AND DISCLAIMER ‐ This Product limited warranty shall only apply in the event and to the extent that (a) the Product is properly and correctly installed, configured, interfaced, maintained, stored, and operated in accordance with Spectra Precision’s applicable operator's manual and specifications, and; (b) the Product is not modified or misused. This Product limited warranty shall not apply to, and Spectra Precision shall not be responsible for, defects or performance problems resulting from (i) the combination or utilization of the Product with hardware or software products, information, data, systems, interfaces, or devices not made, supplied, or specified by Spectra Precision; (ii) the operation of the Product under any specification other than, or in addition to, Spectra Precision standard specifications for its products; (iii) the unauthorized installation, modification, or use of the Product; (iv) damage caused by: accident, lightning or other electrical discharge, fresh or salt water immersion or spray (outside of Product specifications); or exposure to environmental conditions for which the Product is not intended; (v) normal wear and tear on consumable parts (e.g., batteries); or (vi) cosmetic damage. Spectra Precision does not warrant or guarantee the results obtained through the use of the Product, or that software components will operate error free. NOTICE REGARDING PRODUCTS EQUIPPED WITH TECHNOLOGY CAPABLE OF TRACKING SATELLITE SIGNALS FROM SATELLITE BASED AUGMENTA‐ TION SYSTEMS (SBAS) (WAAS/EGNOS, AND MSAS), OMNISTAR, GPS, MODERNIZED GPS OR GLONASS SATELLITES, OR FROM IALA BEACON SOURCES: SPECTRA PRECISION IS NOT RESPON‐ SIBLE FOR THE OPERATION OR FAILURE OF OPERATION OF ANY SATELLITE BASED POSITIONING SYSTEM OR THE AVAILABILITY OF ANY SATELLITE BASED POSITIONING SIGNALS. THE FOREGOING LIMITED WARRANTY TERMS …

Text truncated - open the document above for the full version.

Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 1 of 5 EUT PHOTOS for MobileMapper 20 View of EUT-1 View of EUT-2 View of EUT-3 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 2 of 5 View of EUT-4 View of EUT-5 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 3 of 5 View of EUT-6 View of EUT-7 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 4 of 5 View of EUT-8 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 5 of 5 View of EUT-9

Label Location for NZI802168 FCC ID: NZI802168 Product Name: MobileMapper 20

Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 1 of 14 EUT PHOTOS for MobileMapper 20 View of EUT-1 View of EUT-2 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 2 of 14 View of EUT-3 View of EUT-4 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 3 of 14 View of EUT-5 View of EUT-6 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 4 of 14 View of EUT-7 View of EUT-8 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 5 of 14 View of EUT-9 View of EUT-10 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 6 of 14 View of EUT-11 View of EUT-12 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 7 of 14 View of EUT-13 View of EUT-14 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 8 of 14 View of EUT-15 View of EUT-16 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 9 of 14 View of EUT-17 View of EUT-18 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 10 of 14 View of EUT-19 View of EUT-20 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 11 of 14 View of EUT-21 View of EUT-22 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 12 of 14 View of EUT-23 View of EUT-24 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 13 of 14 View of EUT-25 View of EUT-26 Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-5 Page 14 of 14 View of EUT-27

Tune up procedure 1. It must provide an operational voltage (3.64~4.2V DC) to turn on the module and on one certain channel in service mode by means of company proprietary software. 2. Base station simulator (Rohde& Schwarz CMU200 or Agilent 8960) measures the module specific RF characteristics. 3. The maximum gain of each individual phone are adjusted until the target value met. For GSM 850 band： PCL = 5, PWR = 32 ± 1.5 dBm For GPRS 850: Class 8 , PCL=3, PWR=32 ± 1.5 dBm Class 10, PCL=3, PWR=29 ±1.5 dBm Class 12, PCL=3, PWR=26±1.5 dBm For PCS 1900 band : PCL = 0, PWR = 29 ±1.5 dBm For GPRS 1900: Class 8, PCL=3, PWR=29 ±1 .5dBm Class 10,PCL=3, PWR=27 ±1.5 dBm Class 12,PCL=3, PWR=24±1.5 dBm For WCDMA FDD BAND II: MAXIMUM PWR = 24+1/-3.5 dBm For WCDMA FDD BAND V: MAXIMUM PWR = 24+1/-3.5 dBm WLAN Output Power 802.11b: typical 18dBm +/- 2dBm 802.11g: typical 15dBm +/- 2dBm Bluetooth Transmitter 2 dBm±2 dBm Qualified for Class 2 operation Then this appropriate gain settings are stored in each module individually. The user has no possibility to change these settings later on, and during.manufacturing each phone will be individual calibrated. The measurement is done in fully calibrated setup, which is based on a Rohde& Schwarz CMU200 or Agilent 8960 base station simulator. Furthermore, the highest power level is verified afterwards in a call measurement on three channels (low, middle and high).

Report No. SET2013-05214 CCIC-SET/T-I (00) Page 1 of 124 SAR TEST REPORT Report No.： SET2013-07611 Product： MobileMapper 20 Model No.： MobileMapper 20 Brand Name： SPECTRA Precision FCC ID： NZI802168 IC ID： 9288A-802168 Applicant： Trimble France S.A.S. Address： Z.A.C. de La Fleuriaye, CD 60433, 44474 Carquefou Cedex, France Issued by： CCIC-SET Lab Location： Electronic Testing Building, Shahe Road，Xili, Nanshan District, Shenzhen, 518055, P. R. China Tel： 86 755 26627338 Fax：86 755 26627238 Mail： [email protected] Website：http://www.ccic-set.com This test report consists of 124 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No. SET2013-05214 CCIC-SET/T-I (00) Page 2 of 124 Test Report Product. .................................: MobileMapper 20 Model No. .........................: MobileMapper 20 Brand Name.......................: SPECTRA Precision FCC ID...............................: NZI802168 IC ID..................................: 9288A-802168 Applicant...........................: Trimble France S.A.S. Applicant Address..............: Z.A.C. de La Fleuriaye, CD 60433, 44474 Carquefou Cedex, France Manufacturer.....................: Trimble France S.A.S. Manufacturer Address.........: Z.A.C. de La Fleuriaye, CD 60433, 44474 Carquefou Cedex, France Rating .................................... : 5Vdc 1000mA(Charger) or 3.7V 3000mAh(Battery) Test Standards...................: IEEE Std. 1528-2013, 47CFR§2.1093 RSS-102 Issue 4 March 2010 Test Result........................: Pass Tested by ..........................: Signature, Date Reviewed by......................: Signature, Date Approved by......................: Signature, Date Report No. SET2013-05214 CCIC-SET/T-I (00) Page 3 of 124 Contents 1. GENERAL CONDITIONS 2. ADMINISTRATIVE DATA 2.1. Identification of the Responsible Testing Laboratory 2.2. Identification of the Responsible Testing Location(s) 2.3. Organization Item 2.4. Identification of Applicant 2.5. Identification of Manufacture 3. EQUIPMENT UNDER TEST (EUT) 4. OPERATIONAL CONDITIONS DURING TEST 4.1. Introduction 4.2. SAR Definition 4.3. Phantoms 4.4. Device Holder 4.5. Probe Specification 5. OPERATIONAL CONDITIONS DURING TEST 5.1. Schematic Test Configuration 5.2. SAR Measurement System 5.3. Equipments and results of validation testing 5.4. SAR measurement procedure 5.5. Antennas position and test position 6. CHARACTERISTICS OF THE TEST 6.1. Applicable Limit Regulations 6.2. Applicable Measurement Standards 7. LABORATORY ENVIRONMENT 8. TEST RESULTS 8.1. Summary of Measurement Results 8.2. Conclusion 9. MEASUREMENT UNCERTAINTY 10. MAIN TEST INSTRUMENTS This Test Report consists of the following Annexes: Annex A: Test Layout Annex B: Sample Photographs Annex C: System Performance Check Data Annex D: Calibration Certificate of Probe and Dipoles Report No. SET2013-05214 CCIC-SET/T-I (00) Page 4 of 124 1．GENERAL CONDITIONS 1.1 This report only refers to the item that has undergone the test. 1.2 This report standalone dose not constitute or imply by its own an approval of the product by the certification Bodies or competent Authorities. 1.3 This document is only valid if complete; no partial reproduction can be made without written approval of CCIC-SET 1.4 This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of CCIC-SET and the Accreditation Bodies, if it applies. Report No. SET2013-05214 CCIC-SET/T-I (00) Page 5 of 124 2. Administrative Date 2.1. Identification of the Responsible Testing Laboratory Company Name: CCIC-SET Department: EMC & RF Department Address: Electronic Testing Building, Shahe Road, Nanshan District, ShenZhen, P. R. China Telephone: +86-755-26629676 Fax: +86-755-26627238 Responsible Test Lab Managers: Mr. Wu Li’an 2.2. Identification of the Responsible Testing Location(s) Company Name: CCIC-SET Address: Electronic Testing Building, Shahe Road, Nanshan District, Shenzhen, P. R. China 2.3. Organization Item CCIC-SET Report No.: SET2013-05214 CCIC-SET Project Leader: Mr. Li Sixiong CCIC-SET Responsible for accreditation scope: Mr. Wu Li’an Start of Testing: 2013-11-26 End of Testing: 2013-11-27 2.4. Identification of Applicant Company Name: Trimble France S.A.S. Address: Z.A.C. de La Fleuriaye, CD 60433, 44474 Carquefou Cedex, France 2.5. Identification of Manufacture Company Name: Trimble France S.A.S. Address: Z.A.C. de La Fleuriaye, CD 60433, 44474 Carquefou Cedex, France Notes: This data is based on the information by the applicant. Report No. SET2013-05214 CCIC-SET/T-I (00) Page 6 of 124 3. General Information 3.1. Description Of Equipment Under Test (EUT) Sample Name: MobileMapper 20 Type Name: MobileMapper 20 Brand Name: SPECTRA Precision Mobile phone capability Class B Dual Transfer Mode (DTM) per 3GPP 51.010 Not supported Simultaneous transmission 3G can transmit simultaneously with WLAN 3G can transmit simultaneously with Bluetooth 3G can transmit simultaneously with Bluetooth and WLAN WLAN transmit simultaneously with Bluetooth General description: Support Band and Frequency Range GSM 850MHz: 824.2MHz -848.8MHz GSM 1900MHz: 1850.2MHz-1909.8MHz WCDMA/HSPA Band V: 826.4MHz-846.6MHz WCDMA/HSPA Band II: 1852.4MHz-1907.6MHz WLAN 2.4GHz: 2412MHz-2472MHz Bluetooth: 2402MHz-2480MHz Development Stage Identical Prototype Accessories Power Supply Battery type MG-4LH Battery specification 3000mAh 3.7V Antenna type PIFA Antenna Modulation mode GMSK, QPSK…

Text truncated - open the document above for the full version.

Report No. SET2013-05214 CCIC-SET/T-I (00) Page 83 of 124 ANNEX D of CCIC-SET CONFORMANCE TEST REPORT FOR HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS SET2013-05214 Coolpad Flo Type Name: Coolpad 7560T Hardware Version： P2 Software Version： 4.1.009.P2.130819.7560T Calibration Certificate of Probe and Dipoles This Annex consists of 41 pages Date of Report：2013-09-04 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 84 of 124 Probe Calibration Ceriticate Report No. SET2013-05214 CCIC-SET/T-I (00) Page 85 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 86 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 87 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 88 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 89 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 90 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 91 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 92 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 93 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 94 of 124 SID835 Dipole Calibration Ceriticate Report No. SET2013-05214 CCIC-SET/T-I (00) Page 95 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 96 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 97 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 98 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 99 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 100 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 101 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 102 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 103 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 104 of 124 SID1900 Dipole Calibration Ceriticate Report No. SET2013-05214 CCIC-SET/T-I (00) Page 105 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 106 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 107 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 108 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 109 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 110 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 111 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 112 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 113 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 114 of 124 SID2450 Dipole Calibration Ceriticate Report No. SET2013-05214 CCIC-SET/T-I (00) Page 115 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 116 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 117 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 118 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 119 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 120 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 121 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 122 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 123 of 124 Report No. SET2013-05214 CCIC-SET/T-I (00) Page 124 of 124 Calibration Certificate of Keithley 2000 Multimeter ———End of the Report———

Unilab(Shanghai) Co.,Ltd. Report No. : UL28620131105CE/FCC/IC014-3 Page 1 of 103 FCC Part 15 Test Report for FHSS System Product Name : MobileMapper 20 Model Name : MobileMapper 20 Prepared for: Trimble Nantes S.A.S. Z.A.C de La Fleuriaye CD 60433,44474 Carquefou Cedex France TEL: +33-0-228093800 FAX: +33-0-228093939 Prepared by: Unilab (Shanghai) Co., Ltd. FCC 2.948 register number is 714465 No. 1350, Lianxi Rd. Pudong New District, Shanghai, China TEL: +86-21-50275125 FAX: +86-21-50275126 Report Number : UL28620131105CE/FCC/IC014-3 Date of Report : 2013-12-24 Date of Test : 2013-11-17~2013-12-20 Notes： The test results only relate to these samples which have been tested. Partly using this report will not be admitted unless been allowed by Unilab. Unilab is only responsible for the complete report with the reported stamp of Unilab. Unilab(Shanghai) Co.,Ltd. Report No. : UL28620131105CE/FCC/IC014-3 Page 2 of 103 Applicant: Trimble Nantes S.A.S. Z.A.C de La Fleuriaye CD 60433,44474 Carquefou Cedex France Manufacturer: Trimble Nantes S.A.S. Z.A.C de La Fleuriaye CD 60433,44474 Carquefou Cedex France Product Name: MobileMapper 20 Brand Name: SPECTRA Precision Model Name: MobileMapper 20 FCC ID: NZI802168 IC ID: 9288A-802168 Serial Number: N/A Technical Data: AC input: AC 100~240V 50/60Hz Battery: 3.64V~4.2V Date of Receipt: 2013-11-17 Test Standard: FCC CFR Tile 47 Part 15 Subpart C ANSI C 63.4: 2009 DA 00705 Test Result: Complied Date of Test 2013-11-10~2013-12-20 Prepared by : (Technical Engineer: Andy Wei) Reviewed by : (Senior Engineer: Forest Cao) Approved by : (Supervisor: Eva Wang) Unilab(Shanghai) Co.,Ltd. Report No. : UL28620131105CE/FCC/IC014-3 Page 3 of 103 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................. 5 1.1 EUT DESCRIPTION ................................................................................... 5 1.2 TEST MODE .............................................................................................. 5 2. TEST METHODOLOGY ....................................................................................... 6 2.1 EUT CONFIGURATION ............................................................................. 6 2.2 EUT EXERCISE ......................................................................................... 6 2.3 GENERAL TEST PROCEDURES ............................................................. 6 2.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ................. 7 2.5 DESCRIPTION OF TEST MODES ............................................................. 7 3. TECHNIACL SUMMARY ...................................................................................... 8 3.1 SUMMARY OF STANDARDS AND TEST RESULTS ............................... 8 3.2 TEST UNCERTAINTY................................................................................ 8 3.3 TEST EQUIPMENT LIST ........................................................................... 8 3.4 SUPPORT EQUIPMENT ............................................................................ 9 3.5 TEST FACILITY ......................................................................................... 9 3.6 TEST SETUP CONFIGURATION .............................................................. 9 4. CHANNEL SEPARATION .................................................................................. 10 4.1 TEST SETUP ........................................................................................... 10 4.2 LIMITS...................................................................................................... 10 4.3 TEST PROCEDURE ................................................................................ 10 4.4 TEST RESULT ......................................................................................... 11 5. MINIMUM HOPPING CHANNELS ...................................................................... 12 5.1 TEST SETUP ........................................................................................... 12 5.2 LIMITS...................................................................................................... 12 5.3 TEST PROCEDURE ................................................................................ 12 5.4 TEST RESULT ......................................................................................... 13 6. OCCUPIED BANDWIDTH .................................................................................. 14 6.1 TEST SETUP ........................................................................................... 14 6.2 LIMITS...................................................................................................... 14 6.3 TEST PROCEDURE ................................................................................ 14 6.4 TEST RESULTS ...................................................................................... 15 7. DWELL TIME ...................................................................................................... 19 7.1 TEST SETUP ........................................................................................... 19 7.2 LIMITS...................................................................................................... 19 7.3 TEST PROCEDURE ................................................................................ 19 7.4 TEST RESULTS ...................................................................................... 20 8. PEAK OUTPUT POWER (CONDUCTION) ........................................................ 24 8.1 TEST SETUP ........................................................................................... 24 8.2 LIMITS...................................................................................................... 24 8.3 TEST PROCEDURE ................................................................................ 24 8.4 RESULTS & PERFORMANCE ......................................................…

Text truncated - open the document above for the full version.

Product Name: MobileMapper 20 Test Setup PHOTOS Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-7 Page 1 of 4 Test Setup Photos for Part 15C Minimum hopping channels, Channel separation, Occupied bandwidth, Dwell time, 6dB bandwidth, Power spectral density, Peak output power, Spurious emission(conducted) Test Setup Photos Product Name: MobileMapper 20 Test Setup PHOTOS Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-7 Page 2 of 4 Product Name: MobileMapper 20 Test Setup PHOTOS Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-7 Page 3 of 4 Spurious Emissions Test Setup Photos Description: Radiated Spurious Measurement Setup (From 9KHz to 30MHz) Description: Radiated Spurious Measurement Setup (From 30MHz to 1GHz) Product Name: MobileMapper 20 Test Setup PHOTOS Model Name: MobileMapper 20 Report Number: UL28620131105CE/FCC/IC014-7 Page 4 of 4 Description: Radiated Spurious Measurement Setup (Above 1GHz) AC power line conducted emission Test Setup Photos