O34-ELITE770IBElite 770 Short Range RF

Version May 1999 1 ELITE 770 * U ser's Manual Version May 99 Terminal ELITE 770 2 Version May 1999 3 INGENICO 9, quai de Dion Bouton 92816 Puteaux cedex RCS Nanterre B 317 218 758 - SIRET 317 218 758 00033 DIV0510A Table of contents I- PRESENTATION OF THE TERMINAL 5 1- Introduction 5 2- The Terminal 6 3- The connections 6 4- The Keyboard - Principles of Utilisation 8 5- The Card Reader 9 6- Portable Functioning 9 II- ELITE 770 TECHNICAL OVERVIEW 11 1- Terminal feature 11 2- Display 11 3- Printer 11 4- RS232 Interface 12 5- RS232 Connection 12 6- Modem 13 7- SIM Interfaces 13 8- Technical Specifications 14 III- PROCEDURES OF INSTALLATION 16 1- Configuring Radio Link 16 2- Entering the Date and the Time 17 3- Telephone Network Parameters 18 Terminal ELITE 770 4 4- Configuration Receipt 19 5- Option « Table Number » 19 6- Application Software Downloading Procedure 20 IV- SECURITY RECOMMANDATIONS 21 Version May 1999 5 I- Presentation of the terminal 1- Introduction The ELITE 770 is a portable payment terminal. This terminal was created to process all payments made by magnetic or smart cards. The ELITE 770 terminal benefits from a modular conception which permits it to treat all cards of different types using separate corresponding programs. It is therefore important to understand the manner in which it functions, at the modular and the terminal level. 0 The Modular Level These functions link up with and correspond to the many different types of cards that the terminal processes, the most important of which is the principal function of payment. 0 The Terminal Level There are a certain number of functions that are the concern of a ‘global treatment’ and not of a particular module. The terminal level is the superior level and is common to all modules. This level does not depend on the number or the nature of each module. In its base version the ELITE 770 terminal is equipped with a module that permits it to process Bank Cards. Your retailer or installer will be able to give you all the necessary information on all modules on offer and their installation details. Terminal ELITE 770 6 2- The Terminal The terminal case contains the following elements : The portable terminal itself, • A base. • The cable that connects the terminal to a telephone line. • The block sector that connects the terminal to a 115 or 230 volts power point (depending on the country) 3- The connections 0 Telephonic Connection The compact telephonic cable connection that is supplied with the Elite terminal, must be introduced into the terminal plug, marked with the symbol . The telephone connection (RJ11) must be introduced into the telephone socket in the wall. . Telephonic line 0 Electrical Connection The small jack connection to the block sector is plugged into the connection marked with the symbol on the terminal. The twin pronged electrical plug of the block is connected to an electrical point of 115 or 220 volts (depending the country). Power Supply 0 Connection with an External Peripheral Certain peripheral devices such as a check reader can also be connected. Version May 1999 7 The ELITE 770 terminal must be powered off before connecting the cable on the base, to the RS232 port.. Serial port Version May 1999 8 4- The Keyboard - Principles of Utilisation • The key permits the operator to access the corresponding modular level functions • The and keys permit to access to the terminal level functions and to the system menu • The key ↑↑ permits a paper feed of a couple of centimetres • The GREEN key permits the validation of any information read by or entered into the terminal • The RED key cancels the occurring command after which, it returns the terminal to the idle state • The YELLOW key deletes the last character entered, and is used in certain cases where an override is requested • The key marked 00 can only be used for entering amounts ; more particularly it permits the operator to enter amounts in cents Version May 1999 9 5- The Card Reader 0 Magnetic Stripe Card The card can be read either swiped from right to left, or from left to right. The magnetic track on the card turned on the rear side of the terminal and the card should be swiped through the track reader freely and without hesitation. 0 Micro Chip Card Introduce the card horizontally into the apparatus, the micro-chip facing up, as indicated and leave the card in position for the length of time that it takes to process the transaction. 6- Portable Functioning The ELITE 770 terminal is portable ; it includes batteries which permit to make 150 transactions without connection to the base. A star on the upper right side of the display indicates a correct connection between the terminal and its base. A battery low is indicated by a message « -BAT- » on the display following by a beep. The terminal continues to run during about 40 transactions, but batteries need to be reloaded during at least 14 hours. In a portable mode, the ELITE 770 terminal enters in a wait state automatically after 20 seconds of inactivity or after hitting the RED key. The message « -RANGE- » appears on the terminal display when the terminal is out of range of the base, during a communication establishment. To work properly, put the terminal nearer the base (about 100 meters in open air, 40 meters inside a building depending on the environment). The message « -BUSY- » appears during a connection with the base when an other terminal is already in communication with this base. The operator must wait the end of the communication between the base and the other terminal. The message « -FULL- » appears when the terminal wants to connect a base which already has the right number of terminal. In this case, switch off the base during a few seconds, and launch a profile on each terminal (System menu- Terminal ELITE 770 10 configuration) of the network. If the problem persists, switch off the base and call your maintenance company. Before the first use of the terminal, batteries must be loaded during …

Text truncated - open the document above for the full version.

Elite 770 User’s Manual US Federal Communication Commission (FCC) Warnings: This equipment has been tested and found to comply with the limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning : Changes or modifications not expressly approved by IVI Checkmate Inc. could void the user’s authority to operate the equipment. Telephone Connection Requirements: This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. USOC Jack: RJ-11 An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See installation instructions for details. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. Incidence of Harm: If the terminal equipment Elite 770 causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary. Changes in Telephone Company Equipment or Facilities: The telephone company may make changes in its communications facilities, equipment, operations or procedures, where such action is reasonably required and proper in its business. Should any such changes render the customer’s terminal equipment incompatible with the telephone company facilities the customer shall be given adequate notice to the effect the modifications to maintain uninterrupted service. If trouble is experienced with this equipment, Elite 770, for repair or warranty information, please contact: IVI Checkmate Inc. TotalCARE 1335 North Meadow Parkway Suite 116 Roswell Ga 30076 Tel : 1-800 - 435-3014 Contact : Service Department If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. There are no user serviceable parts inside. General: This equipment cannot be used on public coin phone service provided by the telephone company. Connection to party line service is subject to state tariffs. (Contact the state public utility commission, public service commission or corporation commission for information.) Elite 770 User’s Manual Industry Canada Warnings: This digital apparatus does not exceed the Class A limit for radio noise emissions from the digital apparatus as set out in the radio interference regulations of the Industry Canada. NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safely requirements. The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to the telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.

IVI CHECKMATE Inc., 79 Torbarrie Road, Toronto, Ontario M3L 1G5 ♦ Tel: [416] 245-6700 ♦Fax: [416] 245-6701 Elite 770 Intelligent Base Block Diagram CPU (80C32X2) 915Mhz Radio module Microstripline Adaptation board Wip antenna Static Ram Flash eprom or OTP eprom Serial EEprom USART B A Multiplexer Modem PSNT interface Rs232 interface Rs232 plug Rs232 interface (optionnal) Line Phone Rs232 plug Download interface Battery charge Power supply 4 externals contacts Jack (DC in)

IVI CHECKMATE Inc., 79 Torbarrie Road, Toronto, Ontario M3L 1G5 ♦ Tel: [416] 245-6700 ♦Fax: [416] 245-6701 Monday, June 12, 2000 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Subject: Authority to Act as an Agent to FCC Applicant: IVI Checkmate Inc. Product: Elite 770 Intelligent Base Model: Elite 770 Intelligent Base FCC ID: O34-Elite770IB Dear Sir/Madam, I hereby appoint UltraTech Engineering Labs Inc. (UltraTech) to act as my agent in preparation of this application to F.C.C. for authorization of equipment under F.C.C. Rules. I also certify that the information provided, properly described the device or system for which authorization is required. Regards By: Ayman Sydhom Engineering Technical Support

IVI CHECKMATE Inc., 79 Torbarrie Road, Toronto, Ontario M3L 1G5 ♦ Tel: [416] 245-6700 ♦Fax: [416] 245-6701 Monday, June 12, 2000 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Subject: Request for withholding from public disclosure the schematic diagrams and system block diagrams pursuant to an application for certification. Applicant: IVI Checkmate Inc. Product: Elite 770 Intelligent Base Model: Elite 770 Intelligent Base FCC ID: O34-Elite770IB Dear Sir/Madam, We, IVI Checkmate Inc., would like to request that the schematic diagrams and system block diagrams, labeled Exhibit 6, submitted with the application for certification be withheld from public disclosure as per Section 0.459 of FCC Rules. This request is made under the provisions of Section 0.457(d) of the Commission's Rules, and Section 552(b)(4) of the Freedom of Information Act. These sections authorize as a withholding from public inspection materials which would be privileged as a matter of law if retained by the person submitting them, and materials which would not customarily be released to the public by that person. The detailed confidential materials are listed as follows: No. Title Drawing No. Sheet No. 1 MER206 RADIO BASE 03-302739-C All (1-4) 2 MER206 EQUIPEMENT F1 CAR302740-C All (1-2) 3 MER206 USINAGE PCB302741-C All (1) 4 MER206 MONTAGE PLAQUE 2x2 03-302743-A All (1) 5 Nomemclature Carte MER206 (BOM) CAD_Bill_ All (1-3) 6 Schematics REC109 Multifrequency 06-302525-H All (1) Radio 915/434 MHz 7 Plan D’Equipement Carte REC109-01 CAR302526-H All (1-2) (915 MHz, 433 MHz) 8 Plan D’Usinage REC109 REC109 PCB302527-H All (1) 9 Plan De Montage en Plaque 4x3 06-302529-E All (1) 10 Nomemclature Carte REC109-01,02 CAD_Bill_ All (1-4) If you have any queries, please do not hesitate to contact us by our TOLL FREE numbers: OUR TELEPHONE NO.: 1-800-295-8491 Yours truly, By: Ayman Sydhom Engineering Technical Support

June 20, 2000 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Certification Application under FCC Part 15, Subpart C, Para. 15.249, Low Power Transmitters Operating Within the Frequency Band 911.4 - 918.6 MHz. Applicant: IVI CHECKMATE INC. Product: Elite 770 Intelligent Base Model No.: Elite 770 Intelligent Base FCC ID: O34-Elite770IB Dear Sir/Madam, As appointed agent for IVI CHECKMATE INC., we would like to submit the application to the Federal Communications Commission for certification of the above product. Please review all necessary files uploaded to FCC OET site for detailed information. If you have any queries, please do not hesitate to contact us by our TOLL FREE numbers: OUR TELEPHONE NO.: 1-877-765-4173 Yours truly, Tri Minh Luu, P. Eng., V.P., Engineering Encl 2 3000 Bristol Circle Oakville, Ontario, Canada L6H 6G4 Telephone (905) 829-1570 Facsimile (905) 829-8050 UltraTech Group of Labs

EXHIBIT 11 Photo #: 1 of 2 EXTERNAL EUT PHOTOS EXHIBIT 11 Photo #: 2 of 2 EXTERNAL EUT PHOTOS

IVI CHECKMATE LTD., 79 Torbarrie Road, Toronto, Ontario M3L 1G5 ♦ Tel: [416] 245-6700 ♦Fax: [416] 245-6701 The Following diagrams show the format and location of Elite 770 Intelligent Base product label on the base of Elite 770 terminals. Model : Elite 770 Intelligent Base Modele: Elite 770 Intelligent Base Power: 12VDC / 500mA Alimentaiton: 12VDC / 500mA This device complies with Part 15 of the FCC rules. Operation is subject to The following two conditions: (1) This device may not cause harmful interference And (2) This device must accept any interference received, including interference That may cause undesired operation. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. This equipment complies with Part 68 of the FCC rules. Connect to USOC type: RJ11C REN FCC: 0.3B FCC Registration No.: FCC ID: O34-ELITE770IB Made in E.U. Fabrique en U.E 2416-00205-0100 Diagram 1: Format and text of Elite 770 Product Label Label Specifications: • IVI Part Number: 2416-00205-0100 • Size: 76mm x 36mm (Width x Height) • Material: White vinyl • Text: Black Elite 770 Intelligent Base Product label P/N: 2416-00205-0100 Barcoded label, P/N: 2416-10205-0100 Diagram 2: Position of Product label and Serial number barcoded label on Elite 770 Intelligent Base. Printed Name: Ayman Sydhom Date: May 29, 2000 Signature: Engineering Technical Support

EXHIBIT 12 Photo #: 1 of 10 INTERNAL EUT PHOTOS EXHIBIT 12 Photo #: 2 of 10 INTERNAL EUT PHOTOS EXHIBIT 12 Photo #: 3 of 10 INTERNAL EUT PHOTOS EXHIBIT 12 Photo #: 4 of 10 INTERNAL EUT PHOTOS EXHIBIT 12 Photo #: 5 of 10 INTERNAL EUT PHOTOS EXHIBIT 12 Photo #: 6 of 10 INTERNAL EUT PHOTOS EXHIBIT 12 Photo #: 7 of 10 INTERNAL EUT PHOTOS EXHIBIT 12 Photo #: 8 of 10 INTERNAL EUT PHOTOS EXHIBIT 12 Photo #: 9 of 10 INTERNAL EUT PHOTOS EXHIBIT 12 Photo #: 10 of 10 INTERNAL EUT PHOTOS

IVI CHECKMATE Inc., 79 Torbarrie Road, Toronto, Ontario M3L 1G5 ♦ Tel: [416] 245-6700 ♦Fax: [416] 245-6701 DESCRIPTION OF PRODUCT The minimum configuration for an Elite 770 Short Range RF system consists of one base (Elite 770 Intelligent Base) and one terminal (Elite 770 Hand Held). The system can be expanded to multiple bases with one or more terminals per base. The terminal can also be placed on a charger that also acts as a cradle. The Elite 770 is a Point-of-Sale Electronic Funds Transfer credit and debit system targeted for hospitality merchants. These merchants require portability for credit and wireless PIN entry for on-line debit transactions. The Elite 770 operates as a Stand-alone dial up system; a semi-integrated system with multiple bases wired to a master controller or as a fully integrated system with each base connected to a PC. Type: License exempt approval Band: 902-928Mhz Channels: 15 channels from 911.4 to 914.2Mhz (spaced 200khz), and 15 channels from 915.8 to 918.6Mhz (spaced 200khz) Modulation: frequency modulation Oscillator Frequency for transmitting and receiving: 10.7 MHz Emitting power: less than 50mV/m at 3m Duty-cycle transmission = 30% (70% reception,30% emission) Maximum time of emitting = 300ms (the longest frame). ELITE 770 SYSTEM FEATURES: • RS232 port in base • Dial modem in base • Keypad: 18 key backlit • Smart Card reader ISO 7816 • Memory: 1 Meg (optional 2 Meg) • UNICAPT software architecture • Rechargeable batteries in terminal • Printer: Thermal 4 lines per second • No SIMs (optional 4) • MSR Card Reader: Track 1/2 bi-directional • An optional charger and cradle for the terminal • Display: Backlit LCD graphics • Security: Interac, ANSI standards X3.92, X9.8, X9.19, X9.24 • Support direct modulation radio sets as per RCC 210 (Canada) or FCC XXXX (U.S.) RF modem (Hand Held and Base): • To operate in Canada the radio modem must conform to the Industry Canada Radio Standards Specifications RSS210 for Low Power License – Exempt Radio Communications Devices, Issue 2, Rev 1 dated February 14 1998. Certification by Industry Canada is required prior to product release to allow license - exempt operation. • To operate in the U.S. the radio modem must conform to the FCC requirements for use in the license – exempt band. IVI Checkmate will obtain the required specification. • Capable of communication with the terminal on any of the 15 channels available • Successfully communicate, in free space, with a terminal up to 100 meters away. • Communicates with the terminal at 19,200 baud (real data rate is about 6000bps due to the protocol overlay). Dial Modem (Base): • Serial communications • Supports Bell 212A protocol (1200 baud) • The base will have to connect to Hypercom NAK devices in the USA. The modem needs to support synchronous communications and fast connect. This will not be in the first release. Ports (Base) RS232 • Serial communications port used for application download, key injection and serial communications. • Supports Bell 212A protocol (1200 baud) • Connector type – RJ12 modular jack (6 position x 6 contacts connector) Power Adapter (Base): • CSA/UL certified • 120 Vac/60 Hz Class II Type, Wall Mount. Plugs into the base. Keypad (Hand Held): 18 keys, with backlighting Provide dimple on the “5” key Text and colours as per Appendix A. Printer (Hand Held): Technology - Thermal with graphics capability Print field width - 24 column Print speed – 4 lines per second (with normal battery charge) Font - North American ASCII character set, print normal, double wide. Buttons - Paper feed on keypad of each terminal Smart Card Reader (Hand Held): Complies with ISO 7816 1/2/3, Sync & Async T=1 & T=0 and is EMV and IMV compliant. The Elite 770 hardware supports 3 and 5-volt cards and clock frequencies of 3.579 or 7.159 MHz. The software support for 3 volt cards will be in a future version. The Ingenico Operating System will provide the universal translator allowing drivers to be built for the following chips: T2G (also known as GPM271 or FE291), GPM103, SLE4406, SLE4406E, SLE4418, SLE4428, SLE4436, SLE4442, SLE44C80S, GPM416, GPM898 and SLE44C42S. Magnetic Stripe Reader (Hand Held): ISO 1 and ISO 2 tracks decoding Single swipe (simultaneous) Tracks 1 and 2 read Bi-directional read. There are no known standardized tests for evaluating the quality of the magnetic stripe reader and associated software. In lieu of standardized tests, Ingenico will do tests using two different testers with ten used North American cards.

SCHEMA Plan(s) no : 03-302739-C EQUIPEMENT Plan(s) no : CAR302740-C USINAGE Plan no : PCB302741-C PHOTOS Plan(s) no : 03-302742-C MONTAGE en PLAQUE Plan(s) no : 03-302743-A CUIVRE EQUIPE CAR no : CAR302740-C ------------------------------------------------------------------------------------------------------------------ NOMEMCLATURE CARTE MER206 BASE RADIO ELITE 770 LE 03/04/2000 ------------------------------------------------------------------------------------------------------------------ CAD_Bill of Material , NOT FOR PRODUCTION Code no Description Qte Repere ------- ----------- --- ------- CHI00024 MF 100 25V 12x08-3.50 RADIAL Ht=12mm max. 1 C33 CHI00048 MF 4.7 100V 11x05-2.00 RADIAL Ht=11mm max. 1 C2 CNX00161 JACK-03 ALM JD005 D=2.35 TEKELEC 1 J4 CNX00170 PLUG-06 FE BP SE Ht:11.5 MOLEX Ref:95001-1661 3 J1 J2 J3 CNX00418 FFC 14 PTS COUDE PAS 1mm NON-ZIF COUDE JST Ref:14FMS-1.0SP-TF 1 J5 CNX00547 FFC 06 PTS COUDE PAS 1.25mm TOP/BOTTOM ASSCI 1 J6 OPT00034 LED JAUNE-VERT CMS TYPE 0603 REF: PY1111C-TR STANLEY 1 D7 OPT00040 CAPTEUR OPTO DARLINGTON NEC REF:PS2532L-1 (DIP4-CMS) 2 U2 U3 PCB302741C CUIVRE NU CARTE MER206 1 QUA00049 QUARTZ 11.05920MHz PR BS HC49/S 20ppm capa de charge 16pF 1 Q1 REG00048 MC7805 CD2T VOLTAGE REGULATOR (D2PACK) MOTOROLA 2 T6 T11 SOL00080 RELAIS-2RT 12V TX-D2 12V MATSUSHITA Ht:8.2 L:15 l:7.4 1 RE1 SOLccccc SELF 4.7mH ??? 2 S4 S5 THE00038 POLYSWITCH REF: RXE075 RAYCHEM 1 CTP2 THE00040 TRISIL TPA100B-12 THOMSON DUAL 1 TRI2 THE00049 POLYSWITCH REF: TS250-130-2 RAYCHEM (CMS) 1 CTP1 TRF00058 TRANSFO DE LIGNE STANDARD V34-600/600 OHMS VISHAY REF:TA34M 1 TRF1 TUL00021 SUPPORT CMS PLCC44 YAMAICHI IC160-0444-201 ou INGELEC ING-44-SMT 1 U10 TUL00025 SUPPORT CMS PLCC32 RECTANGULAIRE AMP 0-0822273-1 1 U16 WCER0002 NANO 10 Z5U 63V +80,-20% CNC-2 103 (0805) 2 C32 C38 WCER0011 NANO 22 Z5U 63V +80,-20% CNC-2 223 (0805) 2 C1 C5 WCER0015 PICO 100 Z5U 63V +80,-20% CNC-2 101 (0805) 2 C18 C28 WCER0034 PICO 15 COG 63V 5% CEC-2 150 (0805) 2 C7 C22 WCER0035 PICO 39 COG 63V 5% CEC-2 390 (0805) 1 C9 WCER0062 PICO 220 COG 63V 5% CEC-2 220 (0805) 1 C31 WCER0064 PICO 390 COG 63V 5% CNC-2 391 (0805) 1 C39 WCER0140 NANO 100 X7R 63V 20% 104 (0805) 30 C6 C8 C11 C12 C13 C14 C17 C20 C21 C23 C24 C25 C26 C27 C29 C30 C34 C35 C36 C37 C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 WCER0143 NANO 470 Y5V 50V +80,-20% 474 (1206) 1 C3 WCER0163 NANO 150 X7R 25V 20% CNC12 154(1206) 1 C53 WCER0176 MICRO 4.7 Y5V 50V +80,-20% 475 (1206) 1 C50 WCERaaaj ? Z5U 63V +80,-20% CNC-2 471 (0805) 3 C4 C15 C16 WCIR0017 74HC74 DUAL D FLIP-FLOP SET-RESET (SO14) 1 U14 WCIR0023 74HC00 (SO14) 1 U17 WCIR0027 74HC08 QUAD 2-INPUT AND GATE (SO14) 1 U5 WCIR0036 74HC138 (SO16) 1 U13 WCIR0068 74HC4053 (SO16) 1 U4 WCIR0071 MC34074D (SO14) 1 U18 WCIR0103 MAX705 (SO8) 1 U6 WCIR0143 ADM202E 15kV ESD PROTECT (SO16) 2 U1 U12 WCIR0150 74HC573 (SO20L) 1 U11 WCIR0233 TLC549C 8-BIT A-TO-D CONVERTERS WITH SERIAL CONTROL (SO8) 1 U19 WDIO0005 DIODE HAUTE TENSION BAS21 CMS (SOT23) RTC 4 D1 D2 D3 D4 page1 ------------------------------------------------------------------------------------------------------------------ NOMEMCLATURE CARTE MER206 BASE RADIO ELITE 770 LE 03/04/2000 ------------------------------------------------------------------------------------------------------------------ CAD_Bill of Material , NOT FOR PRODUCTION Code no Description Qte Repere ------- ----------- --- ------- WDIO0006 DIODE DE SIGNAL BAS16 CMS (SOT23) RTC 2 D5 D6 WDIO0014 DIODE DE SIGNAL BAV99 (SOT23) 2 DIODES EN SERIE 4 D8 D9 D10 D11 WDIO0040 TRISIL SMP100-270 ST (DO214AA) 1 TRI1 WMEM0008 SRAM 32Kx8 TT MARQUES 70NS CMOS CMS (FP28) 1 U15 WMEM0009 MEMOIRE E2PROM 4KB SERIE 24C04 NS,XICOR,MICROSHIP (SO8) 1 U8 *********************************************** DOUBLE IMPLANTATION ************************************************** WMEM0050 FLASH MEMORY AT29C010 1Mg (128K x 8) 70ns (PLCC32) 1 U16 ou WMEM0049 EPROM AT27C010(L) CMOS 1MG (128K x 8) PLCC32 1 U16 ********************************************************************************************************************** WMIC0058 USART Z85C230 SCC 10VSC ZILOG (PLCC44) 1 U7 WMIC0060 MODEM SSI73K322L-IH V21 V22 V23 (PLCC28) 1 U9 ********************************************************************************************************************** WMIC0147 MICRO TS87C52X2 OTP 8 BIT 20-40 MHz (PLCC44) 1 U10 ou WMIC0142 MICRO TS80C32X2 ROMLESS 20MHz TEMIC (PLCC44) 1 U10 ********************************************************************************************************************** WRE10131 KILO 22.6 1/8W 1% 0805 1 R65 WRE10186 KILO 10 1/8W 1% 0805 2 R33 R58 WRE10204 KILO 30.9 1/8W 1% 0805 1 R13 WRE10325 KILO 24.9 1/8W 1% 0805 1 R64 WRE10326 KILO 37.4 1/8W 1% 0805 1 R38 WRE10330 KILO 40.2 1/8W 1% 0805 2 R55 R56 WRE50001 KILO 1.5 1/8W 5% 0805 1 R10 WRE50007 KILO 1 1/8W 5% 0805 4 R12 R15 R21 R27 WRE50010 KILO 4.7 1/8W 5% 0805 3 R3 R17 R28 WRE50011 KILO 10 1/8W 5% 0805 7 R1 R18 R19 R20 R22 R30 R34 WRE50012 KILO 22 1/8W 5% 0805 1 R53 WRE50013 KILO 100 1/8W 5% 0805 3 R14 R26 R39 WRE50021 OHMS 100 1/8W 5% 0805 2 R29 R36 WRE50028 OHMS 47 1/8W 5% 0805 1 R32 WRE50038 OHMS 470 1/8W 5% 0805 2 R4 R6 WRE50045 KILO 20 1/8W 5% 0805 1 R37 WRE50047 KILO 5.6 1/8W 5% 0805 1 R11 WRE50048 MEGA 2.2 1/8W 5% 0805 1 R35 WRE50050 KILO 470 1/8W 5% 0805 1 R5 WRE50052 KILO 33 1/8W 5% 0805 1 R9 WRE50074 OHMS 0 1/4W 5% 1206 1 R16 WRE50075 OHMS 220 1/4W 5% 1206 3 R7 R8 R23 WRE50132 OHMS 680 1/8W 5% 0805 1 R31 WRE50144 OHMS 0 1/8W 5% 0805 15 R2 ST7 ST11 ST12 R24 R25 R41 R42 R43 R44 R45 R46 R47 R54 R57 WRE50189 KILO 36 1/8W 5% 0805 2 R48 R49 WRE50194 KILO 3.6 1/8W 5% 0805 1 R40 WRE50214 KILO 91 1/8W 5% 0805 2 R50 R51 WRE50216 OHMS 39 1/2W 5% 2010 1 R52 WRE50281 OHMS 0 1/2W 5% 2010 5 ST1 ST2 ST3 ST4 ST5 WSOL0053 FERRITE BEAD INDUCTOR BLM21A102F MURATA (0805) 4 B3 B4 B5 B6 WSOL0054 SELF DE CHOC CMS MURATA PLM250S30 50V 1A 1 S1 WTAN0011 MICRO 2.2 16V BPACK STC 20% TANTALE 1 C19 WTAN0028 MICRO 10 6V3 BPACK TANTALE 1 C10 WTRA0007 TRANSISTOR PLANAR PNP BC807-25 CM…

Text truncated - open the document above for the full version.

EXHIBIT 9 PLOT # 1 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 2 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 3 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 4 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 5 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 6 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 7 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 8 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 9 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 10 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 11 of 12 MEASUREMENT DATA PLOTS EXHIBIT 9 PLOT # 12 of 12 MEASUREMENT DATA PLOTS

Elite 770 Intelligent Base Model No.: Elite 770 Intelligent Base FCC ID: O34-Elite770IB Applicant: IVI CHECKMATE INC. 79 Torbarrie Road Toronto, Ontario Canada, M3L 1G5 In Accordance With FCC PART 15, SUBPART C, PARA. 15.249 LOW POWER TRANSMITTERS OPERATING WITHIN THE FREQUENCY BAND FROM 911.4 - 918.6 MHz UltraTech's File No.: IVI73-FTX This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: ........................... Report Prepared by: Dan Huynh . Tested by: Hung Trinh, EMI/RFI Technician Issued Date: June 20, 2000 Test Dates: May 30, June 5, 2000 The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected. UltraTech 3000…

Text truncated - open the document above for the full version.