O3M9290002761XLED lamp

FCC ID: O3M9290002761X Page 1 of 1 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 Figure 1 General Appearance (Front Side View) Figure 2 General Appearance (Cover Remove)

LUX A19 9W 160mA 110-130Vac 50/60Hz FCC ID: O3M9290002761X IC:10469A-2761X Notam COLOR: PANTONE DARK GREY 433U 20mm Font size: 1.3mm height Font size: 1.3mm height Model: 9290002761A3Date Code Factory Mark this is a custom laser mark and the heat sink manufacturer should not print it on the heat sink Made in China Font size: 2mm height Serial No.: ABC123 laser mark 距离上下高度5mm Should be centered on the back 需要更新 5mm 5mm 字体至少8号字 750 Lumen

FCC ID: O3M9290002761X Page 1 of 4 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 Figure 1 LED Lamps Cover Figure 2 Internal View FCC ID: O3M9290002761X Page 2 of 4 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 Figure 3 Internal View Figure 4 Wireless Board (Component Side) FCC ID: O3M9290002761X Page 3 of 4 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 Figure 5 Wireless Board (Solder Side) Figure 6 Wireless Board / Crystal Oscillator Ant. FCC ID: O3M9290002761X Page 4 of 4 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 Figure 7 Power Board (Component Side) Figure 8 Power Board (Solder Side)

FCC ID: O3M9290002761X Page 1 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403005 APPLICATION FOR CERTIFICATION On Behalf of Philips (China) Investment Co., Ltd. LED Lamps Model No. : 9290002761 Brand : Philips FCC ID : O3M9290002761X Prepared for Philips (China) Investment Co., Ltd. No. 9, Lane 888, Tian Lin Road, 200233, Shanghai, China Prepared by Audix Technology (Wujiang) Co., Ltd. EMC Dept. No. 1289 Jiangxing East Road, the Part of Wujiang Economic Development Zone Jiangsu China 215200 Tel : +86-512-63403993 Fax :+86-512-63403339 Report Number ACWE-F1403005 Date of Test Feb.23,2014 Date of Report Mar.11,2014 FCC ID: O3M9290002761X Page 2 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403005 TABLE OF CONTENTS Description Page TEST REPORT CERTIFICATION .......................................................................................................4 1. GENERAL INFORMATION.......................................................................................................4 1.1. Description of Device (EUT).................................................................................................................. 4 1.2. Description of Test Facility .................................................................................................................... 5 1.3. Measurement Uncertainty....................................................................................................................... 5 2. SUMMARY OF STADARDS AND RESULTS ..........................................................................6 2.1. Applicable Standard................................................................................................................................ 6 2.2. Specification Limits ................................................................................................................................ 6 2.3. MPE Calculator Method ......................................................................................................................... 6 2.4. Calculated Result .................................................................................................................................... 7 FCC ID: O3M9290002761X Page 4 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403005 1. GENERAL INFORMATION 1.1. Description of Device (EUT) Description : LED Lamps Model No. : 9290002761 FCC ID : O3M9290002761X Brand : Philips Applicant : Philips (China) Investment Co., Ltd. No. 9, Lane 888, Tian Lin Road, 200233, Shanghai, China Manufacturer #1 : Changan Win Channel Electronics Company Limited No.85, Tong Gu Xia Lu, Shangjiao Community, Changan Town, Dongguan City, Guangdong Province, China Manufacturer #2 : Arts Electronics Co., Ltd. Shangxing Lu, Shangjiao Community, Changan Town, Dongguan Guangdong523000 China Radio Technology : IEEE 802.15.4 (ZigBee®) Antenna Gain : -8.5dBi Fundamental Range : 2405 MHz -2480MHz Tested Frequency : 2405MHz (CH11) 2450MHz (CH20) 2480MHz (CH26) Highest Working Frequency : 2.4GHz Date of Receipt of Sample : Nov.20, 2013 Date of Test : Mar.11,2014 FCC ID: O3M9290002761X Page 5 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403005 1.2. Description of Test Facility Name of Firm Audix Technology (Wujiang) Co., Ltd. EMC Dept. Site Location No. 1289 Jiangxing East Road, the Eastern Part of Wujiang Economic Development Zone Jiangsu China 215200 Test Facilities RF Fully Chamber NVLAP Lab Code 200786-0 (NVLAP is a NATA accredited body under Mutual Recognition Agreement) Valid until on Sep.30, 2014 1.3. Measurement Uncertainty Test Item Uncertainty Maximum Peak Output Power ± 0.30dB Remark: Uncertainty = ku c (y) FCC ID: O3M9290002761X Page 6 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403005 2. SUMMARY OF STADARDS AND RESULTS 2.1. Applicable Standard FCC OET Bulletin 65:1997 2.2. Specification Limits Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f2)* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- f/150 30 1500-100,000 -- -- 1.0 30 f = frequency in MHz *Plane-wave equivalent power density NOTE: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. The limit value 1.0mW/cm 2 is available for this EUT. 2.3. MPE Calculator Method S = PG/(4R 2 R = [PG/(4 where: S = power density (in appropriate units, e.g. mW/ cm 2 ) P = power input to the antenna (in appropriate units, e.g., mW) (the measured power value see Report: F12124 Section 6.6) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) FCC ID: O3M9290002761X Page 7 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403005 2.4. Calculated Result Radio Frequency Radiation Exposure Evaluation Frequency Output Power to Antenna Antenna Gain Power Density Limit (MHz) (mW) (dBi) (Numeric) (mW/cm 2 )(mW/cm 2 ) 2405 5.76 -8.5 0.14 0.00016 1.0 2450 5.08 -8.5 0.14 0.00014 1.0 2480 5.24 -8.5 0.14 0.00015 1.0 Frequency Output Power to Antenna Antenna Gain Limit Distance (MHz) (mW) (dBi) (Numeric) (mW/cm 2 ) (cm) 2405 5.76 -8.5 0.14 1.0 0.253 2450 5.08 -8.5 0.14 1.0 0.238 2480 5.24 -8.5 0.14 1.0 0.242 The antenna used for this transmitter must be installed to provide a separation distance of at least 0.253cm from all persons

FCC ID: O3M9290002761X Page 1 of 59 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 APPLICATION FOR CERTIFICATION On Behalf of Philips (China) Investment Co., Ltd. LED Lamps Model No. : 9290002761 Brand : Philips FCC ID : O3M9290002761X Prepared for Philips (China) Investment Co., Ltd. No. 9, Lane 888, Tian Lin Road, 200233, Shanghai, China Prepared by Audix Technology (Wujiang) Co., Ltd. EMC Dept. No. 1289 Jiangxing East Road, the Part of Wujiang Economic Development Zone Jiangsu China 215200 Tel : +86-512-63403993 Fax :+86-512-63403339 Report Number ACWE-F103002 Date of Test Nov.23,2013~Feb.24,2014 Date of Report Mar.11,2014 FCC ID: O3M9290002761X Page 2 of 59 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 TABLE OF CONTENTS Description Page TEST REPORT CERTIFICATION .......................................................................................................4 1. SUMMARY OF MEASUREMENTS AND RESULTS .............................................................5 2. GENERAL INFORMATION.......................................................................................................6 2.1. Description of Device (EUT).................................................................................................................. 6 2.2. Description of Test Facility .................................................................................................................... 7 2.3. Measurement Uncertainty....................................................................................................................... 7 3. CONDUCTED EMISSION MEASUREMET ............................................................................8 3.1. Test Equipment ....................................................................................................................................... 8 3.2. Block Diagram of Test Setup.................................................................................................................. 8 3.3. Power line Conducted Emission Limit ................................................................................................... 8 3.4. Test Procedure ........................................................................................................................................ 9 3.5. Conducted Emission Measurement Results............................................................................................ 9 4. RADIATED EMISSION MEASUREMENT ............................................................................16 4.1. Test Equipment ..................................................................................................................................... 16 4.2. Block Diagram of Test Setup................................................................................................................ 16 4.3. Radiated Emission Limits ..................................................................................................................... 18 4.4. Test Procedure ...................................................................................................................................... 18 4.5. Assessment In All Three Orthogonal Planes ........................................................................................ 19 4.6. Measurement Results ............................................................................................................................ 20 4.7. Restricted Bands Measurement Results (For Below 1GHz)................................................................. 21 4.8. Restricted Bands Measurement Results (ForAbove1GHz) .................................................................. 25 4.9. Spurious Emission Measurement Results in Band Edge Emission (FCC Part 15, 15.205).................. 29 5. 6 DB BANDWIDTH MEASUREMENT ...................................................................................37 5.1. Test Equipment ..................................................................................................................................... 37 5.2. Block Diagram of Test Setup................................................................................................................ 37 5.3. Specification Limits (§15.247(a)(2)) .................................................................................................... 37 5.4. Test Procedure ...................................................................................................................................... 37 5.5. Test Results........................................................................................................................................... 37 6. MAXIMUM PEAK OUTPUT POWER MEASUREMENT ...................................................40 6.1. Test Equipment ..................................................................................................................................... 40 6.2. Block Diagram of Test Setup................................................................................................................ 40 6.3. Specification Limits (§15.247(b)(3)) .................................................................................................... 40 6.4. Test Procedure ...................................................................................................................................... 40 6.5. Test Results........................................................................................................................................... 40 7. BAND EDGES MEASUREMENT ............................................................................................41 7.1. Test Equipment ..................................................................................................................................... 41 7.2. Block Diagram of Test Setup.......................................................................................…

Text truncated - open the document above for the full version.

FCC ID: O3M9290002619X Page 1 of 3 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 1. PHOTOGRAPHS OF MEASUREMENT 1.1. Photos of Conducted Disturbance Measurement Front View of Conducted Disturbance Measurement Side View of Conducted Disturbance Measurement FCC ID: O3M9290002619X Page 2 of 3 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 1.2. Radiated Disturbance Measurement Below 1GHz Above 1GHz FCC ID: O3M9290002619X Page 3 of 3 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1403002 1.3. Measurement for section 5/6/7/8/9/10