
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
RF075E Functional Specification Introduction In order to make the hospital bed up / down ,we need to control the two motors forward / reverse by turning on / off the corresponding relays. Product ID Pic 1. Transmitter’s ID Product Specification List 1. Transmitter’s parameter modulation GFSK Frequency Range 2.4~2.4835GHz Transmitted Power 0 dBm Battery 2 AAA Battery,3V Working Current <15mA Standby Current <5uA Ambient Temperature -40—85°C RC Dimension 128*40*17mm PCB Material & Size FR4 1.0mm 55*38.3mm Housing Material ABS+PC The keys definition: 1. Transmitter: Definition Function KEY_1 If pressed , Relay_1 on KEY_2 If pressed , Relay_2 on Functional Description Pairing method: 1. Press the pairing button of the receiver and the LED is on, then you have 10s to make the remote to pair with the receiver. 2. The distance between the transmitter and the receiver should be less than 2 meters when we do the pairing action. press the KEY_1 and KEY_2 of the transmitter simultaneously till the LED blinks ,then the pairing operation is successful . if we can't see the LED blinking till it is off ,the pairing is fail. 3. if the transmitter and receiver need to pair again ,repeat the step 1 and step 2. FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CE Notes: Manufacturer: DewertOkin GmbH Address: Weststr. 1, 32278 Kirchlengern, Germany declare that this RF075E are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the DoC may be obtained through the address above.
Block Diagram
Agents letter DewertOkin GmbH FCC ID: O3YRF075E Product Name: REMOTE CONTROL ECO TX Model No.: RF075E Date (11/15/2012) BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, DewertOkin GmbH and Address of Weststr.1, 32278 Kirchlengern, Germany, hereby authorize SEM.Test Compliance Service Co., Ltd. And address of 3/F, Jinbao Commerce Building, Xin'an Fanshen Road, Bao'an District, Shenzhen, P.R.C. Jandy so (Telephone: 86-755-33663308), to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on (01/01/2013). Sincerely, Company Officer: Telephone Number: +49 5223 979 184 Email: [email protected]
DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I FCC PART 15.249 EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I FCC PART 15.249 EUT View 3 EUT View 4 DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I FCC PART 15.249 EUT View 5 EUT View 6
DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I FCC PART 15.249 EXHIBIT 1- PRODUCT LABELING Proposed FCC ID Label Format Specifications : Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location
DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I FCC PART 15.249 EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 EUT Housing and Board View 2 DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I FCC PART 15.249 Solder Board-Component View 1 Solder Board-Component View 2
Circuit Description It’s a remote control with a RF function for a Medical treatment device. The remote control’s working voltage is 3V, its working current is less than 15mA when in operation. Frequency Range is 2.404~2.477GHz. and a clock frequency of 16MHz as base clock signal. This remote control has 2 keys, these keys were used to make the hospital bed up / down. And the remote control’s electronic parameters are as follows: 1.Modulation: GFSK 2.Frequency Range: 2.404~2.477GHz 3.Transmitted Power: 0 dBm 4.Working Current: <15mA 5.Ambient Temperature: -40—85°C 6.Battery: 2 AAA battery,3V 7.PCB Material & Size: FR4 1.0mm 55*38.3mm Antenna Specification: Type of Antenna: PCB Antenna Frequency Range: 2400-2483.5MHz Maximum Gain: -0.20 dBi Impedance: 50 ohm Size: 17mm x 11mm Antenna View Antenna Location
1 1 2 2 3 3 4 4 DD CC BB AA Title NumberRevisionSize A4 Date:2012/4/26Sheet of File:C:\Users\..\RF075A Remote schematic.SchDocDrawn By: P0.1 1 VDD 2 DEC1 3 DEC2 4 P0.2 5 PROG 6 P0.3 7 VSS 8 VDD 9 P0.4 10 P0.5 11 P0.6 12 P0.7 13 P1.0 14 P1.1 15 P1.2 16 P1.3 17 P1.4 18 RESET 19 VDD_PA 20 ANT1 21 ANT2 22 VSS 23 VDD 24 IREF 25 VSS 26 VDD 27 P1.5 28 P1.6 29 XC2 30 XC1 31 P0.0 32 U1 NRF24LE1(32P) 15pF C2 15pF C3 12100NF C1 100NF 1.5pFC6 NC C10 2.2NF C9 1pF C8 33NF C11 100NFC4 22K R1 Ant. 2404-2477MHz 6.8NH L2 6.8NH L3 4.7NHL1 GND GND VCC GND GND GND VCC GND GNDGND GND VCC GND GND 100NFC5 33NFC7 GND VCC RESETPROG S1 S4 S5S2 S3S6 CSN P1.1 SCK P0.5MOSI P0 .7 MISO P1 .0 P1.6P1.6 P1.6P1.5 P1.5P1.5 P1.3P1.3 P1.3 P0.4 P0.4P0.6 P0.6 RF075E Remote schematic 1 2 3 4 5 6 7 8 9 10 P1 Header 10 GND PROG VCC CSN P1.1 MOSI P0.7 RESET MISO P1.0 SCK P0.5 C90 100UF/16V VBAT GND D1 1N5819 VCC 100K R3 GND
DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I PAGE 1 OF 23 FCC PART 15.249 FCC Part 15C Measurement and Test Report For DewertOkin GmbH Weststr. 1, 32278 Kirchlengern, Germany FCC ID: O3YRF075E FCC Rules: FCC Part 15.249 Product Description: REMOTE CONTROL ECO TX Tested Model: RF075E Report No.: STR12098004I Tested Date: 2012-09-03 to 2012-09-11 Issued Date: 2012-09-11 Tested By: Seven Song / Engineer Reviewed By: Lahm Peng / EMC Manager Approved & Authorized By: Jandy so / PSQ Manager Prepared By: SEM.Test Compliance Service Co., Ltd 3/F, Jinbao Commerce Building, Xin'an Fanshen Road, Bao'an District, Shenzhen, P.R.C.(518101) Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by SEM.Test Compliance Service Co., Ltd DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I PAGE 2 OF 23 FCC PART 15.249 TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................4 1.3 TEST METHODOLOGY.............................................................................................................................................4 1.4 TEST FACILITY.......................................................................................................................................................4 1.5 EUT SETUP AND TEST MODE.................................................................................................................................5 2. SUMMARY OF TEST RESULTS ...........................................................................................................................6 3. ANTENNA REQUIREMENTS................................................................................................................................7 3.1 STANDARD APPLICABLE.........................................................................................................................................7 3.2 TEST RESULT..........................................................................................................................................................7 4. RADIATED EMISSIONS .........................................................................................................................................8 4.1 MEASUREMENT UNCERTAINTY..............................................................................................................................8 4.2 STANDARD APPLICABLE.........................................................................................................................................8 4.3 TEST EQUIPMENT LIST AND DETAILS.....................................................................................................................8 4.4 TEST PROCEDURE...................................................................................................................................................9 4.5 CORRECTED AMPLITUDE & MARGIN CALCULATION..............................................................................................9 4.6 ENVIRONMENTAL CONDITIONS..............................................................................................................................9 4.7 SUMMARY OF TEST RESULTS/PLOTS....................................................................................................................10 5. OUT OF BAND EMISSIONS.................................................................................................................................18 5.1 STANDARD APPLICABLE.......................................................................................................................................18 5.2 TEST EQUIPMENT LIST AND DETAILS...................................................................................................................18 5.3 TEST PROCEDURE.................................................................................................................................................18 5.4 ENVIRONMENTAL CONDITIONS............................................................................................................................18 5.5 SUMMARY OF TEST RESULTS/PLOTS....................................................................................................................18 6. EMISSION BANDWIDTH .....................................................................................................................................21 6.1 STANDARD APPLICABLE.......................................................................................................................................21 6.2 TEST EQUIPMENT LIST AND DETAILS...................................................................................................................21 6.3 TEST PROCEDURE.................................................................................................................................................21 6.4 ENVIRONMENTAL CONDITIONS............................................................................................................................21 6.5 SUMMARY OF TEST RESULTS/PLOTS....................................................................................................................21 DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I PAGE 3 OF 23 FCC PART 15.249 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: DewertOkin GmbH Address of applicant: Weststr. 1, 32278 Kirchlengern, Germany Manufactu…
Text truncated - open the document above for the full version.
DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I FCC PART 15.249 EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Radiation Emission Test Setup (Below 30MHz) Radiation Emission Test Setup (30MHz to 1GHz) DewertOkin GmbH Model: RF075E REPORT NO.: STR12098004I FCC PART 15.249 Radiation Emission Test Setup (Above 1GHz)
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 270.00 µW |

RF-ENHANCE-ANGLE
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
RF ECO BT M
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
RF-ENHANCE-STRAIGHT
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
RF-1058
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Control Unit CU458-2
Equipment Class
DTS - Digital Transmission System