O6XTGM-AActive Duo RFID Tag TGM-A

© 2012 Wavetrend Europe Limited | All Rights Reserved | All specifications are subject to change without notice. Europe, Australasia and Middle East – Corporate Office USA, Canada and South America +44 (0)20 8614 7779 +1 (703) 539 8502 Micro Tag TGM-A 251666944 Personnel Beacon tag transmitting a unique ID & data at pre-set intervals Ultra long-range transmitter Anti-tamper alert option Motion sensor option IP64 Housing Compact size The TGM-A ActivDuo Tag is an extremely small active tag that continuously transmits a unique ID number, which can be detected by Wavetrend ® reader. An internal battery powers the tag and Wavetrend’s patented ultra low power use design ensures longer battery life at higher rates of transmission than any other brand of active RFID tag. Various preset transmission intervals are available. Best Usage Guide KEY FEATURES BUSINESS BENEFITS Tag can be configured to hold standard 26-bit Wiegand numbering Allows tag to be used with existing access control systems separately or together with the active RFID system. Configurable settings include: Site/vendor ID Tag ID Tag Age Counter Various transmission repetition intervals Tamper Alarm A unique code that can be allocated by Wavetrend to each customer on request. Readers can be set to ignore tags with incorrect site codes. 4.2 billion tag ID’s are available per site code. The Age Counter allows for advance notification of the end of battery life and for the unique identification for each transmission made by the tag. Different status transmission intervals allow tags to be used in diverse applications while offering the best battery life spans in the market. Provides instant notification of unauthorized attempts to remove a tag from an asset. Collision avoidance algorithm Reduces loss of data caused by simultaneous transmissions from multiple tags. Ultra low power consumption Typical lifespan of 3 years at 15 second beacon rate Sealed to IP64 standards Splash Proof © 2012 Wavetrend Europe Limited | All Rights Reserved | All specifications are subject to change without notice. Europe, Australasia and Middle East – Corporate Office USA, Canada and South America +44 (0)20 8614 7779 +1 (703) 539 8502 Micro Tag TGM-A The TGM-A Micro Tag has a unique omni directional antenna design allowing the tag to be read from all directions and to be deployed equally well on metallic and non metallic assets. Optimum read range is achieved on metal with a 10% reduction on non metals. It should be noted that due to its physical size the micro tag has a smaller battery than other tags in the range, for monitoring applications it is recommended to use the TGM-A set at 30 seconds. This allows the user to extend the life of the tag whilst still detecting any motion events. Model Range The tags can be ordered using the part numbers listed below: L-Series TGM-A TGMS-A Ordering & Further Information For more information on purchasing the Activ TGM-A Tag please email W avetrend’s Sales team: [email protected] For more information on W avetrend ® visit our website. Specifications IP Information Wavetrend and the Wavetrend logo are either registered trademarks or trademarks of Wavetrend Technologies Limited in the United States and/or other countries. All other trademarks are the property of their respective owners. The product(s) described in this document are protected by various patents held by Wavetrend. Refer to the URL www.wavetrend.net/IPR for information on all patents and trademarks held, and for Wavetrend's Policy on Intellectual Property Rights. Typical Applications Environmental Operating temperature Storage temperature Humidity : -30°C to +85°C : -40°C to +90°C : 5% to 90% (non-condensing) Physical Size Weight Colour Material : 29 x 25 x 7 mm : 7g : Grey : ABS Radio Frequency Transmit Frequency Range : 433.92 MHz : 1 to 50 + meters (actual range is determined by the choice of reader & antenna used to detect the tag and the environment it is used in) Electrical Power : Internally powered by lithium battery Accessories TA-TGM TA-TGM-AT All sold in packs of 10 : Tag attachment kit : Tamper alerting tag attachment kit FCC Statement of Conformity Wavetrend , TGM-A Active Duo , FCC ID: 06XTGM-A This device complies with Part 15 of the FCC rules subject to the following three conditions: 1) This device may not cause harmful interference. 2) This device must accept all interference received, including interference that may cause undesired operation. 3) This device is for commercial use only and intended for use in a confined area with an appropriate system receiver Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Wavetrend Europe Ltd | Gothic House | 3 The Green | Richmond | Surrey | TW9 1PlL| United Kingdom Telephone +44 (0)2086147779 Company No 4011239 | Vat N o 782 5292 06 LETTER OF AGENCY Date 6 th July 2012 TRaC Global 100 Frobisher Business Park Leigh Sinton Road Malvern Worcestershire WR14 1BX UK To Whom It May Concern: We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application, is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Thank you for your attention to these matters. Yours faithfully Company Name Wavetrend Europe Signature Full Name Will Damerell

Wavetrend Europe Ltd | Gothic House | 3 The Green | Richmond | Surrey | TW9 1PlL| United Kingdom Telephone +44 (0)2086147779 Company No 4011239 | Vat N o 782 5292 06 REQUEST FOR CONFIDENTIALITY IN ACCORDANCE WITH FCC RULE 0.459 Date 6 th July 2012 TRaC Global 100 Frobisher Business Park Leigh Sinton Road Malvern Worcestershire WR14 1BX UK RE: Certification Application FCC ID: 06XTGM-A To Whom It May Concern: Please be advised that the following information is to be held confidential on behalf of Applicants Name Here.  Bill of Materials Circuit Diagrams  Block Diagrams The application contains technical information which Applicants Name Here deems to be trade secrets and propriety. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Yours faithfully Wavetrend Signature Will Damerell

Page 8 3.0 External Photographs The TGM-A can be supplied in one of two cases TGM-A TGMS-A

Page 1 FCC Statement of Conformity Wavetrend , TGM-A Active Duo , FCC ID: 06XTGM-A This device complies with Part 15 of the FCC rules subject to the following three conditions: 1) This device may not cause harmful interference. 2) This device must accept all interference received, including interference that may cause undesired operation. 3) This device is for commercial use only and intended for use in a confined area with an appropriate system receiver Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. TGM-A Label Detail Wavetrend will use the following FCC identifier on all labels Active Duo Tags (FCC) FCC Identifier TGP-A FCC ID: 06XTGP-A TGA-A FCC ID: 06XTGA-A TGM-A FCC ID: 06XTGM-A TGF-A FCC ID: 06XTGF-A Due to the size of the tags the full FCC statement of compliance is supplied on the tag data sheets. The Tag label dimensions are 23x15mm , the tag label is illustrated below.

TGM-A PCB Photographs Author Doc Number Date W Damerell 12 th July 2012 TGM 12072012Revision1.0

Page 1 TGM-A Operational Description Wavetrend Active RFID Hardware uses a half duplex 433.92 ASK communication protocol. The Wavetrend readers are receive only and listen for the transmission of the Wavetrend Active Duo tags. When a reader receives a tag packet over the air interface protocol it decodes the information and stores it in its internal tag buffer, this data is then either polled manually from a local host PC or if the reader is in auto poll pushed to the host. Wavetrend tags are transmit only they cannot receive, they are configured to have two modes of transmission , the primary is the tags beacon rate which can be set at either 15 or 30 seconds. A tag configured with a setting of 15 seconds will wake up automatically every 15 seconds and transmit a single 7ms packet of data, it will then return to sleep mode. All Wavetrend FCC tags accept the TGF have a motion sensor fitted which provides the tag with an external input that is used to drive the secondary beacon rate. In the case of the TGF the secondary beacon is driven by pressing the key fob button. The secondary beacons can only be transmited if the tag is in motion , these have the following interval settings 0.4,0.8,1.5 seconds. On motion the tag will transmit a group of 4 secondary beacons which contain the same 7ms tag packet that is transmitted in a primary beacon. As soon as the tag stops detecting motion , it switches out of the secondary beacon mode and back into the primary beacon mode. The beaconing rates can be selected by Wavetrend or by the end user via the use of a Tag programmer. It should be noted that the firmware in both the FCC tag and in the Tag programmers does not allow the FCC products to be set to primary beacon rates outside of the permeable range, IE the ETSI rates of 0.4, 0.8 or 1.5 seconds. For the absent of doubt , it is not possible to configure an FCC tag to beacon at any other than the FCC beacons schemes , even if programmed with an ETSI programmer. The FCC product is designated Wavetrend Active DUO This method of operation was reviewed and passed by the FCC in January 2012 on the following grant condition This device is for commercial use only and intended for use in a confined area with an appropriate system receiver as indicated in the Certification filing. FCC Contact Joe Dichoso [email protected]<mailto:[email protected]>

A RADIO TEST REPORT FOR WAVETREND EUROPE Ltd ON TGM DOCUMENT NO. TRA-009817-W-US-03 TRaC Wireless Test Report : TRA-009817-W-US-03 Applicant : WAVETREND EUROPE Ltd Apparatus : TGM Specification(s) : CFR47 Part 15.231 (e) July 2010 Purpose of Test : CERTIFICATION FCCID : 06XTGM-A Authorised by : : Radio Product Manager Issue Date :17 th July 2012 Authorised Copy Number : PDF Radio Test Report: TRA-009817-W-US-03 Contents Section 1: Introduction 4 1.1 General 4 1.2 Tests Requested By 5 1.3 Manufacturer 5 1.4 Apparatus Assessed 5 1.5 Test Result Summary 6 1.6 Notes Relating To The Assessment 7 1.7 Deviations from Test Standards 7 Section 2: Measurement Uncertainty 8 2.1 Measurement Uncertainty Values 8 Section 3: Modifications 10 3.1 Modifications Performed During Assessment 10 Appendix A: Formal Emission Test Results 11 A1 Transmitter Intentional Emission Radiated 12 A2 Radiated Electric Field Emissions 13 Appendix B: Supporting Graphical Data 15 Appendix C: Additional Test and Sample Details 20 Appendix D: Additional Information 26 Appendix E: Calculation of the duty cycle correction factor 27 3 Radio Test Report: TRA-009817-W-US-03 Section 1: Introduction 1.1 General This report contains an assessment of an apparatus against Electromagnetic Compatibility Standards based upon tests carried out on samples submitted to the Laboratory. Test performed by: TRaC Telecoms & Radio [ ] Unit E South Orbital Trading Park Hedon Road Hull, HU9 1NJ. United Kingdom. Telephone: +44 (0) 1482 801801 Fax: +44 (0) 1482 801806 TRaC Global [X] Unit 1 Pendle Place Skelmersdale West Lancashire, WN8 9PN United Kingdom Telephone: +44 (0) 1695 556666 Fax: +44 (0) 1695 577077 Email: [email protected] Web site: http://www.tracglobal.com Tests performed by: D. Winstanley Report author: D. Winstanley This report must not be reproduced except in full without prior written permission from TRaC Global. 4 Radio Test Report: TRA-009817-W-US-03 1.2 Tests Requested By This testing in this report was requested by : Wavetrend Europe Ltd Parkshot House 5 Kew Road Richmond Surrey TW9 2PR 1.3 Manufacturer As Above 1.4 Apparatus Assessed The followin g apparatus was assessed between the dates 22 nd – 23 rd May 2012 EUT TGM The above equipment was a 434 MHz transmitter operating in the 433.04 MHz to 434.79 MHz band. 5 Radio Test Report: TRA-009817-W-US-03 1.5 Test Result Summary Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. The statements relating to compliance with the standards below apply ONLY as qualified in the notes and deviations stated in sections 1.6 to 1.7 of this test report. Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. Test Type Regulation Measurement standard Result Spurious Emissions Radiated <1000MHz Title 47 of the CFR: Part 15 Subpart (c) 15.231e & 15.209 ANSI C63.10 Pass Spurious Emissions Radiated >1000MHz Title 47 of the CFR: Part 15 Subpart (c) 15.231e & 15.209 ANSI C63.10 Pass AC Power conducted emissions Title 47 of the CFR: Part 15 Subpart (c) 15.207 ANSI C63.10 N/A Intentional Emission Frequency Title 47 of the CFR: Part 15 Subpart (c) 15.231a ANSI C63.10 Pass Intentional Emission Field Strength Title 47 of the CFR: Part 15 Subpart (c) 15.231e ANSI C63.10 Pass Intentional Emission Band Occupancy Title 47 of the CFR: Part 15 Subpart (c) 15.215c ANSI C63.10 Pass Intentional Emission ERP (mW) Title 47 of the CFR: Part 15 Subpart (c) 15. ANSI C63.10 N/A Unintentional Radiated Spurious Emissions Title 47 of the CFR: Part 15 Subpart (b) 15.109 ANSI C63.10 N/A Antenna Arrangements Integral: Title 47 of the CFR: Part 15 Subpart (c) 15.203 - N/A Antenna Arrangements External Connector Title 47 of the CFR: Part 15 Subpart (c) 15.204 - Pass Restricted Bands Title 47 of the CFR: Part 15 Subpart (c) 15.205 - Pass Maximum Frequency of Search Title 47 of the CFR: Part 15 Subpart (c) 15.33 - Pass Extrapolation Factor Title 47 of the CFR: Part 15 Subpart (c) 15.31(f) - Pass Abbreviations used in the above table: CFR : Code of Federal Regulations ANSI : American National Standards Institution REFE : Radiated Electric Field Emissions PLCE : Power Line Conducted Emissions 6 Radio Test Report: TRA-009817-W-US-03 1.6 Notes Relating To The Assessment With regard to this assessment, the following points should be noted: The results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 1.7 of this test report (Deviations from Test Standards). For emissions testing, throughout this test report, “Pass” indicates that the results for the sample as tested were below the specified limit (refer also to Section 2, Measurement Uncertainty). Where relevant, the apparatus was only assessed using the monitoring methods and susceptibility criteria defined in this report. All testing with the exception of testing at the Open Area Test Site was performed under the following environmental conditions: Temperature : 22 to 23 C Humidity : 45 to 75 % All dates used in this report are in the format dd/mm/yy. This assessment has been performed in accordance with the requirements of ISO/IEC 17025. 1.7 Deviations from Test Standards There were no deviations from the standards test ed to. 7 Radio Test Report: TRA-009817-W-US-03 Section 2: Measurement Uncertainty 2.1 Measurement Uncertainty Values For the test data recorded in the following measurement uncertainty was calculated: Radio Testing – General Uncertainty Schedule All statements of uncertainty are expanded standard uncertainty…

Text truncated - open the document above for the full version.