O9YWCM2GPS Tracker

Vehicle/Battery Powered, Rechargeable Trailer and Asset Tracker HIGHLIGHTS The WCM-002 tracker is a real-time vehicle tracking system designed for vehicle recovery, fleet management, and more.. . IT’S RELIABLE The ultra-thin yet durable WCM-002is a high-performance cellular tracking device designed for vehicle financing, vehicle tracking, lot management, theft recovery, or other fleet applications. With an integrated GNSS receiver, the Wildcat includes an LTE Cat-M modem for wireless data communication. The built in high performance antennas for both cellular radio and GNSS receivers make installation easy. IT’S SIMPLE No programming skills required; the WCM-002 comes with easy-to- configure application software and an extended AT command set. Reports can be triggered periodically or in response to events such as motion, speeding, harsh acceleration and braking, geo-fence violations, and battery status. Notifications can be sent for vehicle towing, battery removal, and more. IT’S FUNCTIONAL The WCM-002 interface supports serial communication with external terminals and devices, as well as IO options dedicated to ignition, starter inhibit, and buzzer. A built in 3-axis accelerometer enables motion detection and monitoring of driver behavior. An internal Lithium-Ion back up battery allows for continuous operation more than 2 days @ 1 report per day when the device is disconnected from the main power. An optional buzzer alert system for driver warnings is available inside the unit.  LTE-CAT M1  Integrated cellular and GPS antenna  LED status indicators for GPS and network registration  Integrated accelerometer  I/O options to support ignition, buzzer, and relay.  Communication via SMS, UDP, Ack UDP  Configurable reporting schedules  Over-the-air configuration and firmware upgrade  Extended AT Command set for flexible and easy configuration WCM-002 Specifications ELECTRICAL CELLULAR  CAT M1 LTE: 699/787/1710/1850/2155 B2@20±1dBm/ B4@20±1dBm / B12@18± 1dBm /B13@18±1dBm /B25@20±1dBm  Integrated high sensitivity antenna  Auto register to packet network GPS  Channels: 55  Tracking Sensitivity: -161 dBm  Acquisition Sensitivity: -146 dBm  Location Accuracy: <2.5 CEP BATTERY INFORMATION  Battery Type: 1 * KP401422 Li-ion/80mA  Battery Life: > 2 days @ 1 report per day ENVIRONMENTAL  Operation Temperature: -20°C to +60°C  Storage Temperature: -40°C to +80°C  Operation Humidity: 20% to 90% (non- condensing)  Storage Humidity: 10% to 95% RH (non- condensing)  Designed to meet SAE J1455, SAE 113, and J121  Operating Voltage: 8V-32VDC  On-battery  Hibernate: <400uA  Tracking 40mA Typical On-12V  Hibernate: <400A  Sleep: < 2.5mA  Tracking: 30mA Typical  Reporting: 130mA Typical PHYSICAL  Dimensions: 87.0mm x 48.0mm x 13.5mm  Weight: 90g  Internal Cellular and GPS Antenna INTERFACE CONNECTOR  I/O Connector: 8-pin connector  UART_TTL (3.3V) (RX/TX)  Buzzer output signal  Ignition signal for car start  Relay switch signal  GPIO configuration signal APPROVALS  FCC FCC Regulations:  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/ TV technician for help.  Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter.

Spireon Inc Request for Confidentiality Date: _2021-4-20_ Subject: Confidentiality Request for: FCC JD: O9YWCM2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested D Short Term Permanent D Short Term D Short Term D ShortTerm D ShortTerm D ShortTerm D Short Term D ShortTerm D Permanent* 1 Permanent Permanent Permanent Permanent D Short Tenn D Permanent* *Note: Qnsert Explanation as Necessary) Exhibit Block Diagrams External Photos Internal Photos Operation Description/fheory of Operation Parts List & Placement/BOM Schematics Tune-Up Procedure Test Setup Photos User's Manual _ Spireon Inc_ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Tenn Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of_ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Tenn and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: (Signature/fitle 2 ) _ Jason Penkethman (Print name) 3~

Spireon Inc POWER OF ATTORNEY DATE: 4/20/2021 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize TA Technology (Shanghai) Co., Ltd. /Li Yuhong on our behalf, to apply to FCC on our equipment for FCC ID: O9YWCM2. Any and all acts carried out by TA Technology (Shanghai) Co., Ltd. I Li Yuhong on our behalf shall have the same effect as acts of our own. Sincerely, Signature : Print name: Jason Penkethman Company: Spireon Inc

Statement DATE: May 9, 2021 The module of this product is BG95‐M6. BG95‐M6 has been certified and the corresponding FCC ID is XMR202007BG95M6. The RF test report numbers for BG95‐M6 are R2006A0413‐R2 and R2006A0413‐R4. The RF test report numbers for this new project are R2103A0295‐R1V1 and R2103A0295‐R2V1. And this product only supports some frequency bands (EMTC Band 2/4/12/13/25) in the module report, other frequency bands are shut down by software. Sincerely, Spireon Inc. Signature: Print name: Jason Penkethman

EUT Appearance Report No.: R2103A0295 Page 1 of 3 EUT Appearance EUT Appearance Report No.: R2103A0295 Page 2 of 3 EUT Appearance Report No.: R2103A0295 Page 3 of 3 a: EUT Picture 1: Constituents of EUT

EDGE Tracker Label A1234567890 A1234567890 352165050019160 352165050019160 A1234567890 352165050019160 A1234567890 352165050019160 A1234567890 352165050019160 EDGE-M2 FCC ID : O9YWCM2 IC : 22952-WCM2 IDesigned in California | Made in China SN: AS8050019160 IMEI : 015237000019160 P18150 H/W : 1.0.0 A1234567890 352165050019160 A1234567890 A1234567890 352165050019160 352165050019160 A1234567890 352165050019160 A1234567890 352165050019160

I TA Techno This report sh Interna Internal photo ology (Shang hall not be repr al photo ghai) Co., L roduced except td. tin full, without t the written ap pproval of TA Te Rep echnology (Shan port No.: R2103 Pa nghai) Co., Ltd. 3A0295 age 1 of 4 I TA Techno This report sh Internal photo ology (Shang hall not be repr ghai) Co., L roduced except td. tin full, without t the written ap pproval of TA Te Rep echnology (Shan port No.: R2103 Pa nghai) Co., Ltd. 3A0295 age 2 of 4 I TA Techno This report sh Internal photo ology (Shang hall not be repr ghai) Co., L roduced except td. tin full, without t the written ap pproval of TA Te Rep echnology (Shan port No.: R2103 Pa nghai) Co., Ltd. 3A0295 age 3 of 4 I TA Techno This report sh Internal photo ology (Shang hall not be repr ghai) Co., L roduced except td. tin full, without t the written ap pproval of TA Te Rep echnology (Shan port No.: R2103 Pa nghai) Co., Ltd. 3A0295 age 4 of 4

MPE TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR202007BG95M6 Product LTE Cat M1 & Cat NB2 Module Brand Quectel Model BG95-M6 Marketing Quectel BG95-M6 Report No. R2006A0413-M1 Issue Date August 17, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Yu Wang Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 MPE Test Report Report No.: R2006A0413-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 2 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 3 1.1 Notes of the Test Report ......................................................................................................... 3 1.2. Test facility ............................................................................................................................ 3 1.3 Testing Location ...................................................................................................................... 3 1.4 Laboratory Environment .......................................................................................................... 4 2 Description of Equipment under Test .............................................................................................. 5 3 Maximum conducted output power (measured) and antenna Gain ................................................ 6 4 Test Result ..................................................................................................................................... 7 MPE Test Report Report No.: R2006A0413-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 3 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Fan Guangchang Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] MPE Test Report Report No.: R2006A0413-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 4 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.4 Laboratory Environment Temperature Min. = 18C, Max. = 25 C Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. MPE Test Report Report No.: R2006A0413-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 5 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment under Test Client Information Applicant Quectel Wireless Solutions Co., Ltd Applicant address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer Quectel Wireless Solutions Co., Ltd Manufacturer address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 General Technologies Model BG95-M6 IMEI / Hardware Version R1.1 Software Version BG95M6R02A01 Date of Testing: May 24, 2020~ June 16, 2020 Note: 1. The EUT is sent from the applicant to TA and the information of the EUT is declared by the applicant. 2. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. BG95-M6 (Report No.: R2006A0413-M1) is a variant model of BG95-M5 (Report No.: R2005A0283- M1). Test values duplicated from Original for variant. There is no test for variant in this report. The detailed product change description please refers to the Statement letter_BG95-M5&BG95-M6. MPE Test Report Report No.: R2006A0413-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 6 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 3 Maximum conducted output power (measured) and antenna Gain The numeric gain (G) of the antenna with a gain specified in dB is determined by Numeric gain (G)=10^(antenna gain/10) Band Maximum Conducted Output Power (dBm) (mW) LTE Band 2 25.000 316.228 LTE Band 4 25.000 316.228 LTE Band 5 25.000 316.228 LTE Band 12 25.000 316.228 LTE Band 13 25.000 316.22…

Text truncated - open the document above for the full version.

TA Techno 47 CFR Pa with the req ology (Shangh art 1 1.1310. quirements a Pr TA T No.1 MP App FCC Pro Mod Rep Issu hai) Co., Ltd. The test res u s documente repared by: Techn 45, Jintang R PE TE plicant C ID oduct del port No. ue Date tested the ab ults show that ed in this repo Yu Wang ology Rd, Tangzhe TEL: + 8 FAX: +86-0 EST R Spireo O9YW GPS T WCM- R2103 April 2 bove equipme t the equipme ort. Ap y (Shan n Industry P 86-021-50791 021-5079114 REPO on Inc WCM2 Tracker -002 3A0295-M 28, 2021 ent in accorda ent tested is c pproved by: nghai) ark, Pudong 1141/2/3 41/2/3-8000 ORT M1 ance with the capable of de : Guangchan ) Co., L Shanghai, C e requirement monstrating c ng Fan Ltd. China ts in FCC compliance MP TA Techno This report sh 1 Te s t L 1.1 N 1.2. T 1.3 T 1.4 L 2 Desc 3 Maxi m 4 Te s t R ANNEX A PE Test Report logy (Shangh hall not be repr Laboratory .. Notes of the Test facility Testing Loca Laboratory E ription of Eq mum conduc Result ........ A: The EUT A t hai) Co., Ltd. roduced except .................. Test Repo r y ................. ation ........... Environment quipment un cted output .................. Appearance TA tin full, without Table ................... rt ................. ................... ................... t .................. der Test ...... power (mea ................... ................... A-MB-01-013S t the written ap e of Con ................... ................... ................... ................... ................... ................... asured) and ................... ................... S pproval of TA Te tents .................. .................. .................. .................. .................. .................. antenna G a .................. .................. Rep echnology (Shan .................. .................. .................. .................. .................. .................. ain .............. .................. .................. port No.: R210 Page nghai) Co., Ltd. ................... ................... ................... ................... ................... ................... ................... ................... ................... 3A0295-M1 e 2 of 10 ................ 3 ................ 3 ................ 3 ................ 3 ................ 4 ................ 5 ................ 6 ................ 7 .............. 10 MP TA Techno This report sh 1 Test 1.1 Not This repor (shangha conditions into accou regulatory 1.2. Tes FCC (Des TA Techn list of test 1.3 Tes Compa Addres City: Post c o Country Contac Telepho Fax: Website E-mail: PE Test Report logy (Shangh hall not be repr t Labora tes of the rt shall not b ai) co., Ltd.T s and modes unt and are p y compliance st facility signation nu ology (Shan facilities rec sting Loca any: TA s: No Sh ode: 20 y: P. t: F a one: +8 +8 e: ht fa t hai) Co., Ltd. roduced except atory Test Repo be reproduce The results d s of operatio published fo e of the app umber: CN1 nghai) Co., L cognized to ation A Technolog o.145, Jinta hanghai 01201 R. China an Guangch 86-021-5079 86-021-5079 ttp://www.ta- nguangchan TA tin full, without ort ed in full or p documented on as describ or informatio licable stand 1179, Test F Ltd. has bee perform m e y (Shangha ng Rd, Tang hang 91141/2/3 91141/2/3-8 -shanghai.co ng@ta-shan A-MB-01-013S t the written ap partial, witho d in this repo bed herein . onal purpose dards stated Firm Regist n listed on th easurements i) Co., Ltd. gzhen Indus 000 om nghai.com S pproval of TA Te out the writte ort apply onl Measurem e es only. This d above. tration Num he US Fede s. stry Park, Pu Rep echnology (Shan en approval y to the tes t ent Uncertai report is w r mber: 44662 eral Commun udong Shang port No.: R210 Page nghai) Co., Ltd. of TA techn ted sample, nties were n ritten to supp 26) nications Co ghai, China 3A0295-M1 e 3 of 10 nology under the not taken port ommission MP TA Techno This report sh 1.4 Lab Te m p er Relative Ground Ambien Reflect PE Test Report logy (Shangh hall not be repr boratory E rature e humidity d system res nt noise is ch ion of surrou t hai) Co., Ltd. roduced except Environme sistance hecked and unding objec TA tin full, without ent found very cts is minim A-MB-01-013S t the written ap Min. = 18 Min. = 30 < 0.5  low and in c ized and in S pproval of TA Te 8C, Max. = 0%, Max. = compliance w compliance Rep echnology (Shan 25 C 70% with requirem with require port No.: R210 Page nghai) Co., Ltd. ment of stan ement of sta 3A0295-M1 e 4 of 10 ndards. andards. MP TA Techno This report sh 2 Des Client In Applica Applica Manufa Manufa General T Model SN Hardwa Softwa Date of Date of Note: 1 th e 2. All in Co., L Uncerta PE Test Report logy (Shangh hall not be repr scription nformation ant ant address acturer acturer add Technologie are Version are Version f Testing: f Sample Re . The EUT i e applicant. dications o f Ltd. based ainties were t hai) Co., Ltd. roduced except of Equip Sp s 9 7 As dress N P u es n eceived: s sent from fPass/Fail in on interpr not taken in TA tin full, without pment un pireon Inc 724 Kingsto siatelco Tec o. 68 Huatu udong, Shan WCM-002 1# MM15_P1 01.003.02.0 April 2, 202 March 29, 2 the applican n this report retations an nto account A-MB-01-013S t the written ap nder Tes n Pike, Suite chnologies C o Road, Bui nghai 20120 003 21 ~ April 13 2021 nt to TA and are opinion nd/or obse and are pu b S pproval of TA Te st e 800, Knox Co. ilding-8, Zha 03, China , 2021 d the informa s expressed rvations of blished for in Rep echnology (Shan xville angjiang Hi-T ation of the E d by TA Tech f test resu nformational port No.: R210 Page nghai) Co., Ltd. Tech Park, EUT is decla hnology (Sha ults. Measu l purposes o 3A0295-M1 e 5 of 10 ared by anghai) urement only. MP TA Techno This report sh 3 Max The nume Numeric g L L LT LT LT PE Test Report logy (Shangh hall not be repr ximum co eric gain (G) gain (G)=10^ Band LTE Band 2 LTE Band 4 TE Band 12 TE Band 13 TE Band 25 t hai) Co., Ltd. roduced except onducted of the anten …

Text truncated - open the document above for the full version.

RF TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR202007BG95M6 Product LTE Cat M1 & Cat NB2 Module Brand Quectel Marketing Quectel BG95-M6 Model BG95-M6 Report No. R2006A0413-R2 Issue Date August 17, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2019)/ FCC CFR 47 Part 24E (2019). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 RF Test Report Report No.: R2006A0413-R2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-002R Page 2 of 67 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ...................................................................................................................................... 4 1.1. Notes of the test report .................................................................................................................. 4 1.2. Test facility ..................................................................................................................................... 4 1.3. Testing Location ............................................................................................................................ 4 2. General Description of Equipment under Test ....................................................................................... 5 2.3. Applicant and Manufacturer Information ....................................................................................... 5 2.4. General information ....................................................................................................................... 5 3. Applied Standards .................................................................................................................................. 6 4. Test Configuration .................................................................................................................................. 7 5. Test Case Results .................................................................................................................................. 8 5.1. RF Power Output and Effective Isotropic Radiated Power ........................................................... 8 5.2. Occupied Bandwidth ................................................................................................................... 13 5.3. Band Edge Compliance ............................................................................................................... 19 5.4. Peak-to-Average Power Ratio (PAPR) ....................................................................................... 36 5.5. Frequency Stability ...................................................................................................................... 38 5.6. Spurious Emissions at Antenna Terminals ................................................................................. 47 5.7. Radiates Spurious Emission ....................................................................................................... 61 6. Main Test Instruments ......................................................................................................................... 67 RF Test Report Report No.: R2006A0413-R2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-002R Page 3 of 67 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Summary of measurement results No. Test Case Clause in FCC rules Verdict 1 RF Power Output and Effective Isotropic Radiated Power 2.1046 24.232(c) PASS 2 Occupied Bandwidth 2.1049 PASS 3 Band Edge Compliance 2.1051 /24.238(a) PASS 4 Peak-to-Average Power Ratio 24.232/KDB 971168 D01(5.7) PASS 5 Frequency Stability 2.1055 / 24.235 PASS 6 Spurious Emissions at Antenna Terminals 2.1051 / 24.238(a) PASS 7 Radiates Spurious Emission 2.1053 / 24.238(a) PASS Date of Testing: May 23, 2020 ~ June 16, 2020 Note: PASS: The EUT complies with the essential requirements in the standard. FAIL: The EUT does not comply with the essential requirements in the standard. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. BG95-M6 (Report No.: R2006A0413-R2) is a variant model of BG95-M5 (Report No.: R2005A0283-R2V1).Test values duplicated from Original for variant. Only Radiates Spurious Emission for worst band is tested for variant and it does not worsen, so it will not be recorded in this report. The detailed product change description please refers to the Statement letter_BG95-M5&BG95-M6. RF Test Report Report No.: R2006A0413-R2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-002R Page 4 of 67 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. Test Laboratory 1.1. Notes of the test report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission l…

Text truncated - open the document above for the full version.

RF TEST REPORT ApplicantQuectel Wireless Solutions Co., Ltd FCC IDXMR202007BG95M6 ProductLTE Cat M1 & Cat NB2 Module BrandQuectel ModelBG95-M6 MarketingQuectel BG95-M6 Report No.R2006A0413-R4 Issue DateAugust 17, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements inFCC CFR47 Part 2 (2019)/ FCC CFR47 Part 27C (2019). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Peng TaoApproved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF Test ReportReport No.: R2006A0413-R4 TA Technology (Shanghai) Co., Ltd.TA-MB-05-003RPage 2 of 105 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1 Test Laboratory................................................................................................................................................4 1.1 Notes of the Test Report........................................................................................................................4 1.2. Test facility................................................................................................................................................4 1.3 Testing Location......................................................................................................................................4 2 General Description of Equipment under Test............................................................................................5 2.1 Applicant and Manufacturer Information.............................................................................................5 2.2 General information.................................................................................................................................5 3 Applied Standards...............................................................................…

Text truncated - open the document above for the full version.