OGK30013500001RF Tag

PinPoint 721 Tag and PinPoint Tag Programmer PinPoint 721 Tag and PinPoint Tag Programmer PinPoint 721 Tag and PinPoint Tag Programmer User Guide User Guide P/N: 3000-11620-001 Released: 02/26/04 PinPoint 721 Tag and PinPoint Tag Programmer PinPoint 721 Tag and PinPoint Tag Programmer Q Preface................................................................................................................................3 Overview............................................................................................................................4 Using the PinPoint Tag Programmer..............................................................................5 Replacing a Battery in the PTP ......................................................................................8 Applying a 721 Tag .........................................................................................................9 Removing a 721 Tag ......................................................................................................10 Testing a 721 Tag............................................................................................................11 Troubleshooting ..............................................................................................................11 Cleaning and Caring for a 721 Tag...............................................................................13 721 Specifications............................................................................................................14 PTP Specifications............................................................................................................14 WARNINGS Compliance Statement ( Part 15.19 ) This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning ( Part 15.21 ) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF Exposure ( OET Bulletin 65 ) To comply with FCC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or installed at locations where there is at least 20cm separation distance between the antenna and all persons. FCC ID: OGK30013500001 IC Part # - TAG - 1001 - 05 Industry Canada ID CAN xxxxxxxxxxxxxxxx Industry Canada Statement 222The term “IC” before the certification/registration number only signifies that the Industry Canada technical specifications were met. Contents Copyright 2004 by RF Technologies, Inc. All rights reserved. No part of this work may be reproduced or copied in any form or by any means without written permission from RF Technologies, Inc. PinPoint 721 Tag and PinPoint Tag Programmer PinPoint 721 Tag and PinPoint Tag Programmer It is important for your facility to implement and enforce the following guidelines in order to keep all equipment functioning properly. Important Information Installation and Configuration User Training It is the responsibility of the facility to implement structured training procedures for all employees using the system. Only users who have received adequate training on the use of the system should use the system. Failure to adequately train employees may cause equipment failure due to user error. In addition, incorrect use of the equipment may also result in equipment failure. System Maintenance It is the responsibility of the facility to establish and facilitate a regular mainte- nance schedule of your (PinPoint ® ) system. This includes regular inspection, testing, and cleaning. Failure to provide regular maintenance to these products may result in equipment failure. The 721 Tags are water and shock resistant; however, immersion, high-pressure washing, or extreme force can damage the 721 tags. The 721 Tag may absorb radio signals in the immediate area of the Tag. This can hinder Tag performance. WARNINGS It is the responsibility of the facility to use the supplies specified by RF Technologies for all (PinPoint ® ) installations. Failure to use the supplies specified by PinPoint may result in equipment failure. IU xy„iƒX PinPoint 721 Tag and PinPoint Tag Programmer PinPoint 721 Tag and PinPoint Tag Programmer Q Preface This guide provides detailed information about the PinPoint 721 Tag and the PinPoint Tag Programmer. It provides detailed instructions about using the 721 Tags and Tag Programmer as well as specific requirements. Contact Information For more information about PinPoint Systems go to www.PinPointCo.com. For technical support, contact (800) 669-9946. For questions or comments about PinPoint System documentation, contact the PinPoint Technical Publications team at [email protected]. The PinPoint System is a Real-Time Location System (RTLS). It uses high frequency radio signals from cell controllers to locate and follow the movement of the 721 tags, which are attached to assets. Tagged items can include hospital equipment, many varieties of containers, and a wide array of devices and other mobile resources that require protection, tracking, or location. From here, the data is sent to client applications and stored in a database. About this Guide The PinPoint 721 Tag and PinPoint Tag Programmer User Guide is intended for users who fasten, clean, and care for 721 Tags. It includes detailed information about the 721 Tags and using the PinPoint Tag Programmer to program them. Additional Documentation Documentation for the PinPoint System is available in Portable Document Format (PDF) on the PinPoint System. The PinPoint System Documentation includes the following guides: PinPoint Information Center User Guide PinPoint Web Forms User Guide PinPoint Notifications User Guide IT xy„iƒX PinPoint 721 Tag and PinPoint Tag Programmer PinPoint 721 …

Text truncated - open the document above for the full version.

FCC CONFIDENTIALITY Date: 09/26/03 To: FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Non disclosure for FCC: OGK30013500001 To Whom It May Concern: Pursuant to 47 CFR Section 0.459, RF Technologies, Inc. hereby requests non disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC: OGK30013500001 a. Schematic Diagrams b. Operational Description c. Block Diagram Above materials contain trade secrets, proprietary and technical information that would customarily be guarded from competitors under 47 CFR section 0.457(d)(2). Disclosure or publication of any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. RF Technologies, Inc. understands that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant.

Response to TCB Findings 1. The label sample supplied is missing the "ID" after the "FCC". Please supply a corrected label sample. Supplied. The label photo in the external photos document is representative of the location only. See the revised label sample for the updated label.

RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo One – External Top surface of T50 Tag with Company Logo RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo Two – External Back surface of T50 Tag with FCC ID Number RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo Three – External FCC ID Close-Up of Molded in Plastic Number

PinPoint Corporation Functional Requirements Document: Labeling Specification _____________________________________________________________________________________________ FCC-1005-05-001 Label ECO P849- 03 721 Labeling Specification September 11, 2003 721 Tag Labels FCC Markings are stamped into the plastic. ID Label Color: White with Black Lettering. Material: White Poly Barcode: 12 digit, number Numbers: 000.001.000.000 → 000.001.015.159 • Thickness = .7 • All dimensions are in inches

RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo One – Internal Open for Inspection RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo Two – Internal Two PCB’s Layered Together RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo Three – Internal PCB with Battery RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo Four – Internal PCB Antenna RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo Five – Internal PCB’s Separated showing flip side of PCB Antenna RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo Six – Internal Close-up of Flip side of Component PCB RF Technologies, Inc. PinPoint Tag - T50 Edition 2.442GHz Rx / 5.800GHz Tx FCC ID#: OGK30013500001 Photo Seven – Internal All 4 Product Components Side by Side

Test Report Report No ED0777-1 Client L.S. Compliance Inc. W66 N220 Commerce Court Cedarburg, WI 53012 Phone (262)-375-4400 Fax (262)-375-6731 Model TAG-1005-05 S/N 06 (normal operation) and 02 (continuous operation) Results As detailed within this report Prepared by _____________________ Evan Gould – Test Engineer Authorized by __________________________ Michael Buchholz – EMC Manager Issue Date 12/5/03 Conditions of issue This Test Report is issued subject to the conditions stated in ‘terms and conditions’ section of this report. Curtis-Straus LLC is accredited by the American Association for Laboratory Accreditation for the specific scope of accreditation under Certificate Number 1627-01. This report may contain data which is not covered by the A2LA accreditation. _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 REPORT: ED0777 FCC ID: OGK30013500001 _____________________________________________________________ Table Of Contents Summary.........................................................................................................................3 Test Methodology............................................................................................................3 Statement of Conformity..................................................................................................4 Setup Photos...................................................................................................................5 Radiated Spurious Emissions.........................................................................................7 Test Equipment Used......................................................................................................8 Terms And Conditions.....................................................................................................9 A2LA Accreditation........................................................................................................11 _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 Page 2 of 13 REPORT: ED0777 FCC ID: OGK30013500001 _____________________________________________________________ Summary The purpose of this test report is to show that the EUT complies with the FCC 15.209 field strength limits in the range 18 – 40GHz. Both the “normal” and “continuous” modes were tested. Test Methodology Radiated emissions testing is performed according to the procedures specified in ANSI C63.4 (2002). Frequency range investigated: 18GHz – 40GHz Measurement distance: 18 – 26.5GHz 1m 26.5 – 40GHz 0.1m (After scanning at the distances specified above, the EUT’s were placed approximately 1 – 3cm away from the mouth of the horn antennas.) EUT’s were rotated around three orthogonal axes to maximize emissions. EUT’s were powered with fresh KEEPER II model#: LTC-7PN-S2 lithium batteries. _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 Page 3 of 13 REPORT: ED0777 FCC ID: OGK30013500001 _____________________________________________________________ Statement of Conformity On December 1, 2003 the T50 tag was tested and has been found to conform with the following parts of the 47 CFR as detailed below: Part 15 Comments 15.209 There were no emissions within 20dB of the limit detected in the range 18-40GHz. _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 Page 4 of 13 REPORT: ED0777 FCC ID: OGK30013500001 _____________________________________________________________ Setup Photos 18 – 26.5GHz _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 Page 5 of 13 REPORT: ED0777 FCC ID: OGK30013500001 _____________________________________________________________ _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 Page 6 of 13 26.5 – 40GHz REPORT: ED0777 FCC ID: OGK30013500001 _____________________________________________________________ Radiated Spurious Emissions LIMITS Radiated emissions must comply with the limits specified in §15.209(a). MEASUREMENTS No emissions within 20dB of the limit were detected in the range 18 – 40GHz. _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 Page 7 of 13 REPORT: ED0777 FCC ID: OGK30013500001 _____________________________________________________________ Test Equipment Used R EV . 11/17/03 S PECTRUM A NALYZERS R ANGE MN M FR SN A SSET C ALIBRATION D UE O RANGE 9kHz-26.5GHz E4407B HP US39440975 00394 27-JUN-2004 O PEN A REA T EST S ITE (OATS) FCC C ODE IC C ODE VCCI C ODE C ALIBRATION D UE S ITE F 93448 IC 2762-F R-1688 25-MAR-2005 A NTENNAS R ANGE MN M FR SN A SSET C ALIBRATION D UE HF (W HITE ) H ORN 18-26.5GH Z 801-WLM W AVELINE 00758 00758 15-JUL-2005 M IXERS /D IPLEXERS R ANGE MN M FR SN A SSET C ALIBRATION D UE M IXER / H ORN 26.5-40 GH Z 11970A/28-442- 6 HP/ATM 2332A00900/A046903-01 00369 09-JUL-2004 P REAMPS R ANGE MN M FR SN A SSET C ALIBRATION D UE R ED 0.10-2000MH Z ZFL-1000-LN C-S N/A 00798 17-MAR-2004 HF (Y ELLOW ) 18-26.5GH Z AFS4-18002650-60-8P-4 C-S 467559 00758 15-JUL-2004 Unless otherwise noted the calibration interval is one year. All equipment is calibrated using standards traceable to NIST or other nationally recognized calibration standard. _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 Page 8 of 13 REPORT: ED0777 FCC ID: OGK30013500001 ____________________…

Text truncated - open the document above for the full version.

L.S. Compliance, Inc. W66 N220 Commerce Court Cedarburg, WI 53012 262-375-4400 Fax: 262-375-4248 COMPLIANCE TESTING OF: T-50 Repeater PREPARED FOR: RF Technologies Mr. Mike Leigh 3125 North 126 th Street Brookfield, WI 53005 TEST REPORT NUMBER: 303402-TX TEST DATE(S): November 1 ST through December 7 th , 2003 All results of this report relate only to the items that were tested. This report is not to be reproduced, except in full, without written approval of L. S. Compliance, Inc. L.S. Compliance, Inc. Page 2 of 27 Test Report Number: 303402-TX Prepared For: RF Technologies Table of Contents Section Description Page Index 2 1 L. S. Compliance in Review 3 2 A2LA Certificate of Accreditation 4 3 A2LA Scope of Accreditation 5 4 Validation Letter-U.S. Competent Body for EMC Directive 89/336/EEC 6 5 Signature Page 7 6 Product and General Information 8 7 Product Description 8 8 Test Requirements 9 9 Declaration of Conformity 9 10 Introduction 10 11 Purpose 10 12 Radiated Emissions Test 11-22 13 Conducted Emissions Test (AC Power Line) 23 14 Frequency and Power Stability versus Voltage 24 Appendix A Test Equipment List 25 B Data Format Details 26-27 L.S. Compliance, Inc. Page 3 of 27 Test Report Number: 303402-TX Prepared For: RF Technologies 1. L. S. Compliance In Review Brief Review of L.S. Compliance Accreditations and Listing’s As an EMC Testing Laboratory, our Accreditation and Assessments are recognized through the following: A2LA – American Association for Laboratory Accreditation Accreditation based on ISO/IEC 17025 : 1999 with Electrical (EMC) Scope of Accreditation A2LA Certificate Number: 1255.01 Federal Communications Commission (FCC) – USA Listing of 3 Meter Semi-Anechoic Chamber based on Title 47 CFR – Part 2.948 FCC Registration Number: 90756 Listing of 3 and 10 meter OATS based on Title 47CFR – Part 2.948 FCC Registration Number: 90757 Industry Canada On file, 3 Meter Semi-Anechoic Chamber based on RSS-212 – Issue 1 File Number: IC 3088-A On file, 3 and 10 Meter OATS based on RSS-212 – Issue 1 File Number: IC 3088 U. S. Conformity Assessment Body (CAB) Validation Validated by the European Commission as a U. S. Competent Body operating under the U. S. /EU, Mutual Recognition Agreement (MRA) operating under the European Union Electromagnetic Compatibility –Council Directive 89/336/EEC, Article 10.2. Date of Validation: January 16, 2001 Validated by the European Commission as a U.S. Notified Body operating under the U.S./EU, Mutual Recognition Agreement (MRA) operating under the European Union Telecommunication Equipment – Council Directive 99/5/EC, Annex V. Date of Validation: November 20, 2002 Notified Body Identification Number: 1243 L.S. Compliance, Inc. Page 4 of 27 Test Report Number: 303402-TX Prepared For: RF Technologies 2. A2LA Certificate of Accreditation L.S. Compliance, Inc. Page 5 of 27 Test Report Number: 303402-TX Prepared For: RF Technologies 3. A2LA Scope of Accreditation L.S. Compliance, Inc. Page 6 of 27 Test Report Number: 303402-TX Prepared For: RF Technologies 4. Validation Letter – U.S. Competent Body for EMC Directive 89/336/EEC L.S. Compliance, Inc. Page 7 of 27 Test Report Number: 303402-TX Prepared For: RF Technologies 5. Signature Page Prepared By: March 31, 2004 Teresa A. White, Document Coordinator Date Tested By: March 31, 2004 Abtin Spantman, EMC Engineer Date Approved By: March 31, 2004 Kenneth L. Boston, EMC Lab Manager Date PE #31926 Licensed Professional Engineer Registered in the State of Wisconsin, United States L.S. Compliance, Inc. Page 8 of 27 Test Report Number: 303402-TX Prepared For: RF Technologies 6. Product and General Information Manufacturer: RF Technologies Model No.: T-50 Tag Serial No.: S/N:02=continuous operation, S/N:06=normal operation Description: 2.4 GHz to 5.7 GHz Upconverter-Repeater 7. Product Description The RF Technologies, Inc. PinPoint™ asset tag is a 5.8 GHz identification tag that can be read by a PinPoint Cell Controller at distances up to a maximum range of 400 feet with an accuracy of +-10 feet. Each tag has been programmed at the factory with a permanent 32-bit serial number allowing over 4 billion different tag ID’s. The tag has a sealed battery and is expected to operate for over 3 years. The tag reports low battery when approximately 10% of the batteries life is remaining. The system can report the location of the tags that need to be replaced due to low batteries. The tag incorporates a tamper mechanism that signals users when someone has attempted to remove the tag from an asset. Several mounting options are available for attaching the tag to assets and personnel. The tag is 1.9” x 1.38” x .7”. Parameters of the tag such as motion detection, chirp rates, and tamper detection can be programmed in the field allowing flexibility of existing tags. PinPoint is the world’s first Real Time Location System (RTLS). The system allows end-users the ability to locate, track, and secure their inventory or valuable assets. The hardware system uses Cell Controllers to continually track PinPoint’s tags in real time. Using high –frequency radio signals, PinPoint can read tags at long distances (no line of sight is required) and track their movement within a facility or around its perimeter. The entire system seamlessly connects to existing LAN architecture, and the Tags and Antennas do not interfere with existing radio systems. The Cell Controllers use standard chips and the Linux operating system and software is Windows based to support a wide variety of client systems. The RF Technologies, Inc. PinPoint Cell Controller Antennas utilize high-frequency radio signals to communicate with PinPoint electronic Tags. The Antennas are connected to Cell Controllers. Cell Controllers provide power and signal to the antennae. Each Cell Controller can control up to 16 Antennas, which are used in sequence by the Cell Controller to send signals to tags and receive their responses. The Cell Controller sends a 2.4 GHz signal via the Anten…

Text truncated - open the document above for the full version.

Photos Taken During Radiated Emission Testing EUT in Vertical Orientation EUT in Horizontal Orientation EUT in Side Orientation EUT Setup During Radiated Emission Testing Rear View Detail of the EUT Setup During Radiated Emission Testing