OGUVER5810BLE Dual band plug-in sensor

www.mokosmart.com Datash MK110Plus03BLEGateway UserManual VersionV1.0 www.mokosmart.com 1.Aboutthisdocument..............................................................................................1 2.LEDstatus...............................................................................................................1 3.InstalltheGateway.................................................................................................1 4.ConfiguregatewaywithAPP...................................................................................2 4.1ConfiguremobileAPP....................................................................................2 4.2Configuregateway.........................................................................................4 4.3ScanBLEdevices............................................................................................9 4.4ManageBLEdevices......................................................................................9 4.5Filterandupload..........................................................................................10 4.6Powermetering...........................................................................................20 4.7Gatewayparametersettings........................................................................21 4.8OTA..............................................................................................................24 4.9ModifyNetworksettings..............................................................................25 4.10DeviceInformation....................................................................................26 4.11Reboot.......................................................................................................27 4.12ResetDevice..............................................................................................27 AppendixA:WPA2EnterpriseSecurity.....................................................................28 AppendixB:ConnecttoAWSIoT..............................................................................28 RevisionHistory........................................................................................................30 Contents www.mokosmart.com 1 1.Aboutthisdocument MK110Plus03isaBLEtoWiFipluggatewaywithpowermetering.ThegatewaycollectsBeacon advertisingdataandtransferstocloud,atthesametime,itisanintelligentandmeteringplug,it canberemotelycontrolledtoswitchon/offandmonitorthepowerconsumptionofconnected load,userscaneasilyrealizeBeacondatacollecting,intelligentcontrolandpowermonitoring togetherbytheonedevice. ThisUserGuidewasdesignedtohelpuserstoknowtheMOKOMK110Plus03gatewayandsetup thegatewaywithMOKOAPP. 2.LEDstatus FunctionActionLEDPatterns Bluetoothstatus(Pairing mode) BluetoothisadvertisingFlashBlue BluetoothisconnectedSolidBlue WIFIstatus ConnectingtotheWIFISlowlyflashGreen(every2s) Connectingtotheserver QuicklyflashGreen(every 500ms) Connectedtotheserver successfully SolidGreen DownlinkcommunicationConnectedwithBeaconSolidPurple Restoretofactorysettings Pressbuttonfor10secondsin1 minuteafterpowered,the gatewaywillberesetandenter pairingmode. AlternatelyflashBlueandGreen once OTAstatus OTAprocessFlashYellow OTAsucceedSolidYellow OTAfailedSolidRed 3.InstalltheGateway Insertthegatewayintoapowersocket,thegatewaywillstartworkimmediately,wecanseethe LEDblinking. Ifthegatewayhasbeenneverconfigured,itwillenterpairingmode,theLEDwillblinkBlue.Ifthe gatewayhasbeenconfiguredbefore,itwilltryre-connectingtothenetwork,theLEDwillblink Green. www.mokosmart.com 2 4.ConfiguregatewaywithAPP MOKOprovidesademoAPPwithuserstoconfigurethegateway,pleasesearch“MKScannerPro” inAPPStoreorGooglePlaytodownloadtheAPP.Wheninstallit,pleaseallowthelocationand storagepermissions. Intheconfiguration,wewillfirstlyconfiguretheappconnectingtoMQTTbrokerandthen configuregatewayconnectingtoMQTTbroker.AftertheAPPandgatewayarebothconnected withMQTTbroker,thenuserscanusetheAPPtoremotelymanagethegateway. 4.1ConfiguremobileAPP RunthemobileAPPonyourmobilephone,select“Remotegatewaywithmetering”tostartthe configuration. ClicktoconfigureMQTTsettingsfortheAPP.TheAPPhasdefaultMQTTsettings,ifusing defaultsettingsfortestingpurpose,justclick.Italsoallowstochangethesettings,after enterandsavenewsettings,appwillconnecttotheMQTTserver.Ifconnectsuccessfully,itwill show“success”,otherwiseitwillshow“connectfailed”.Ifconnectfailed,pleasecheckthesettings andconnectagain. www.mokosmart.com 3 Therearethreebuttonsintheverybottomofthispagetohelpusersquicklycompletethe configuration:  Clearallconfigurations:Deleteallthecurrentsettings,sothatuserscaninputnewsettings.  Exportconfigfile:ExportthecurrentsettingsfromtheAPP,itwillcreateaexcelfileandcan besentbyemail.  Importconfigfile:Withtheexportedfile,userscanchangethesettingsandimportthenew filetotheAPP,thentheAPPwillusethenewsettings. Ifconfigurewithcustomerserver,pleasefollowthesesettingsdescriptionasbelow: TypeParameterDescription Brokersetting HostServerIPaddressordomainname Port Serverport Clientid MQTTclientid,eachdeviceconnectedtotheserver shouldhaveadifferentclientid. Topics Subscribe ThesetwosettingsareusedforconnectingtoAlibaba cloud.IfconnecttoaMQTTbrokerorAWSIoT,please leaveitblank. Publish General CleansessionDefault:Enable,range:Enable/Disable Qos Qualityofservice.Default:1,range:0-2 KeepAliveDefault:60,range:10-120 UserCredentials Username Ifaccesstoyourserverdoesn’trequireausernameand password,itcanbeblank. Password www.mokosmart.com 4 SSL/TLS SSL/TLS on:SSLencryption.off:noencryption Certificates ItsupportsCAsignedservercertificate/CAcertificate file/Selfsignedcertificates 4.2Configuregateway WhenthegatewayLEDflashesBlue,click“AddDevices”.Wecanseesomeadvertisersnamed “MK110Plus03-XXXX”,selectthecorrectdeviceandenterpasswordMoko4321.AfterAPP connectswiththegatewayBluetooth,theLEDwillturntosolidBlue. ThenwecanconfiguretheNetwork,MQTTandsomeothersettingsforthegateway.Afterall settingsarefinished,click“Connect”button,thegatewaywillconnectto…

Text truncated - open the document above for the full version.

Midmark RTLS Solutions, Inc 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Midmark RTLS Solutions, Inc Address: 600 E FRONT ST STE 106 TRAVERSE CITY MI 49686, United States Product Name: BLE Dual band plug-in sensor FCC ID: OGUVER5810 Model(s): VER5810 2.911(d)(5)(i) Equipment Type We, [Midmark RTLS Solutions, Inc ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Tracy Matula Date: 2024-07-10 Title and Company name: Manager NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Midmark RTLS Solutions, Inc 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Midmark RTLS Solutions, Inc Address: 600 E FRONT ST STE 106 TRAVERSE CITY MI 49686, United States Product Name: BLE Dual band plug-in sensor FCC ID: OGUVER5810 Model(s): VER5810 2.911(d)(5)(ii) Applicant filing We, [Midmark RTLS Solutions, Inc] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Tracy Matula Date: 2024-07-10 Title and Company name: Manager NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Midmark RTLS Solutions, Inc 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Midmark RTLS Solutions, Inc Address: 600 E FRONT ST STE 106 TRAVERSE CITY MI 49686, United States Product Name: BLE Dual band plug-in sensor FCC ID: OGUVER5810 Model(s): VER5810 2.911(d)(7) USA Designated Agent for Service of Process We, [Midmark RTLS Solutions, Inc ] (“the applicant”) designate [Midmark RTLS Solutions, Inc] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Midmark RTLS Solutions, Inc Address: 600 E FRONT ST STE 106 TRAVERSE CITY MI 49686, United States FRN: 0005814827 Contact Name: Tracy Matula Telephone No: 1.877.983.7787 Email: [email protected] Applicant Company name: Midmark RTLS Solutions, Inc Address: 600 E FRONT ST STE 106 TRAVERSE CITY MI 49686, United States FRN: 0005814827 Contact Name: Tracy Matula Telephone No: 1.877.983.7787 Email: [email protected] Midmark RTLS Solutions, Inc 2.911 (d)(7)USA Agent v1.2 Signature: Title: Manager Signature: Title: Manager Date: 2024-07-10 Date: 2024-07-10 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s-to-the-communications-supply-chain-through-the

FCC Software Configuration Control Declaration Rev1.1(5G) Midmark RTLS Solutions, Inc FCC Software Configuration Control Declaration Date: July 11, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: BLE Dual band plug-in sensor / VER5810 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Tracy Matula Date: 2024-07-10 Title: Manager Signature of applicant

Midmark RTLS Solutions, Inc Agent Authorization Company: Midmark RTLS Solutions, Inc Address: 600 E FRONT ST STE 106 TRAVERSE CITY MI 49686, United States Product Name: BLE Dual band plug-in sensor Model Number(s): VER5810 Product Description: BLE Dual band plug-in sensor FCC Identifier: OGUVER5810 ISED ID Number: 2239B-5810 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2024-07-10 Name: Tracy Matula Title: Manager

Midmark RTLS Solutions, Inc Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-07-10 Subject; Request for Long Term Confidentiality FCC ID: OGUVER5810 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description software security requirement It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Tracy Matula Title: Manager

Model: VER5810 External Model: VER5810 Model: VER5810 Model: VER5810

Label&Location BLE Dual band plug-in sensor Model: VER5810 FCC ID: OGUVER5810 IC: 2239B-5810

Model: VER5810 Internal Model: VER5810 Model: VER5810 Model: VER5810

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: Midmark RTLS Solutions，Inc Address: 600 E FRONT ST STE 106 TRAVERSE CITY MI 49686, United States EUT Name: BLE Dual band plug-in sensor Brand Name: Midmark Model Number: VER5810 Series Model Number: N/A Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF240426R00405 Test Standards: 47 CFR Part 2 Subpart J Section 2.1091 FCC ID: OGUVER5810 Test Conclusion: Pass Test Date: 2024-04-27 to 2024-05-22 Date of Issue: 2024-06-17 Prepared By: Chris Liu / Project Engineer Date: 2024-06-17 Approved By: Ryan.CJ / EMC Manager Date: 2024-06-17 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF240426R00405 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2024-06-17 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF240426R00405 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 3. Test Requirement ................................................................................................................................................................................. 6 3.1 Assessment Result ............................................................................................................................................................... 6 Test Report Number: BTF240426R00405 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laboratory Condition Ambient Temperature: 20°C to 25°C Ambient Relative Humidity: 45% to 55% Ambient Pressure: 100 kPa to 102 kPa 1.4 Announcement (1) The test report reference to the report template version v0. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing, reviewing and approving the test report. (3) The test report is invalid if there is any e…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 147 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Midmark RTLS Solutions，Inc Address: 600 E FRONT ST STE 106 TRAVERSE CITY MI 49686, United States EUT Name: BLE Dual band plug-in sensor Brand Name: Midmark Model Number: VER5810 Series Model Number: N/A Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF240426R00403 Test Standards: 47 CFR Part 15E Test Conclusion: Pass FCC ID: OGUVER5810 Test Date: 2024-04-27 to 2024-05-22 Date of Issue: 2024-06-17 Prepared By: Chris Liu / Project Engineer Date: 2024-06-17 Approved By: Ryan.CJ / EMC Manager Date: 2024-06-17 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF240426R00403 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 147 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2024-06-17 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF240426R00403 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 147 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ......................................................................................................................................... 5 1.1 Identification of Testing Laboratory .............................................................................................. 5 1.2 Identification of the Responsible Testing Location ..................................................................... 5 1.3 Announcement ................................................................................................................................ 5 2 PRODUCT INFORMATION ......................................................................................................................... 6 2.1 Application Information .................................................................................................................. 6 2.2 Manufacturer Information ............................................................................................................... 6 2.3 Factory Information ........................................................................................................................ 6 2.4 General Description of Equipment under Test (EUT) .................................................................. 6 2.5 Technical Information ..................................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................................ 7 3.1 Test Standards ................................................................................................................................. 7 3.2 Uncertainty of Test .......................................................................................................................... 7 3.3 Summary of Test Result ................................................................................................................. 7 4 TEST CONFIGURATION ............................................................................................................................ 8 4.1 Test Equipment List ........................................................................................................................ 8 4.2 Test Auxiliary Equipment ............................................................................................................. 14 4.3 Test Modes ..................................................................................................................................... 14 5 EVALUATION RESULTS (EVALUATION) ................................................................................................ 15 5.1 Antenna requirement .................................................................................................................... 15 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) .............................................................................. 15 6.1 Conducted Emission at AC power line ....................................................................................... 15 6.1.1 E.U.T. Operation: ................................................................................................................. 15 6.1.2 Test Setup Diagram: ............................................................................................................ 15 6.1.3 Test Data: ............................................................................................................................ 16 6.2 Duty Cycle ...................................................................................................................................... 18 6.2.1 E.U.T. Operation: ..............................................................…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 38 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Midmark RTLS Solutions，Inc Address: 600 E FRONT ST STE 106 TRAVERSE CITY MI 49686, United States EUT Name: BLE Dual band plug-in sensor Brand Name: Midmark Model Number: VER5810 Series Model Number: N/A Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF240426R00404 Test Standards: 47 CFR Part 15 Subpart E Section 15.407 FCC ID: OGUVER5810 Test Conclusion: Pass Test Date: 2024-04-27 to 2024-05-22 Date of Issue: 2024-06-17 Prepared By: Chris Liu / Project Engineer Date: 2024-06-17 Approved By: Ryan.CJ / EMC Manager Date: 2024-06-17 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF240426R00404 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 38 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2024-06-17 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF240426R00404 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 38 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory .................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ....................................................................................................... 4 1.3 Laboratory Condition ............................................................................................................................................................. 4 1.4 Announcement ........................................................................................................................................................................ 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ........................................................................................................................................................ 5 2.2 Manufacturer Information .............................…

Text truncated - open the document above for the full version.