OGX-D311ANDROID DONGLE

Android TM Dongle User Manual D311 2 FEATURES Android Dongle is based on Android OS. You can use it: PRODUCT & ACCESSORIES 345 9876 QUICK INSTALL GUIDEINTERFACEUSE WITH MOUSE INSTALLING WIZARD •WELCOME PAGE - the device •INSTALLING WIZARD You can set your Dongle as below: Choose your language; Choose your Wi-Fi network access point; Adjust screen size, click the arrows on the four HDMI Usb HDMI Usb Product Y-USB Cable(150cm) User Manual •Normal Condition Insert Dongle into TV's HDMI input interface. Connect Dongle's micro USB port to TV's USB port via USB supply line for power supply. (*ATTENTION:Make sure the USB power supply can offer 5V/at least 1.5A.If not, please use a 5V/1.5A output AC adapter instead!) •Connected Condition (NO ENOUGH SPACE FOR DONGLE AROUND THE TV'S HDMI INPUT INTERFACE): Connect Dongle to TV's input interface needs to add another HDMI extended wire. HDMI extended cable *sketch map *Back Cover SAFETY WARNING PLACEMENT ●Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf. ●Do not expose the unit to direct sun- light and other sources of heat. ●Do not handle liquids near or on the unit. ●Never spill liquid of any kind into the unit ●Do not put the unit near appliances ●Do not put heavy objects on top of the unit. POWER SUPPLY ●Make sure the USB power supply can offer 5V/at least 1.5A.If not, please use a 5V/at least 1.5A output AC adapter instead. ●Please unplug power supply and aerial plug when the weather is thunder-storm or lightning. ●Please unplug power supply, when there is nobody at home or didn’t use over a long period of time. ●Please keep power cord from physi- cal or mechanical damage. ●Please use exclusive power cord, don’t modify or lengthen it. ●Please check and ensure AC source is connected with the ground. SECURITY INFORMATION Before using the product, please read this manual throughly. The manual contains important security information and tutorials about the product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. TEMPERATURE ●Do not place the unit near or over a radiator or a heater register. ●If your unit is suddenly moved from a cold to a warm place, unplug the power cord for at least two hours until moisture removed. HUMIDITY ●Do not expose machine in rain, damp or place near water. ●Ensure the indoor is dry and cool. VENTILATION ●Keep the ventilation openings clear. ●Ensure that the unit has enough space for ventilation around. BATTERY ●Please dispose used battery cor- rectly. ●Please don’t let kid touch battery, in case of dangerous don’t throw SOFTWARES ●Some softwares for smart phones or unique CPU solutions may not suit for this product. ●Some softwares need unique pe- ripherals to support, like G-sensor, may not suit for this product. SAFETY WARNING • Surf the Internet via Wi-Fi • Communicate with your friends via SNS applications • Enjoy movie, music and photo via media player applications 10 version involved in this manual is for reference only. subject to change without prior notice. HDMI extention (Optional) Adaptor(Optional) You can use a wireless mouse to operate the Android Dongle easiely: Plug the USB receiver to the Y-USB cable. 1. Left click: 2. Right click:Back(Set fuction in settings) 3. Middle click:Open menu(Set fuction in settings) 4. MouseWheel:Roll over, Page up&down NumberFeatures HDMI output Signal light(Light on during running,light off when shut down) Micro USB port (OTG & Power supply) Y-USB Cable Power supply(5V) Y-USB Cable OTG(USB 2.0) Left Click Right Click to back Middle Click to open menu Rolling to page up&down 5V Power supply USB receiver Input DC5V 1.5A FCC ID:OGX-D311 Guangzhou Shiyuan Electronics Co., Ltd Pointer speed Mouse Right Button Mouse Middle Button 1. Open the ApkInstaller 2. Find the icon of the application, and enter it 3. Press the install button 4. You can find the application in tab “Apps” after installation 12 BROWSER •Middle click: Call out the menu of browser •Right click: Back to the last page •Search bar: Call out the search bar to search or input web address •Mouse wheel: Roll over to page up/down APPLICATIONS 11131415 2019 18 17 16 • Language & input Select language Android keyboard Remote controller input method • About device Status Model number Android version Kernel version Build number • System updates Update system via update.zip from USB flash drive Menu of Browser • Set a new window (At most 4) • Bookmarks • Refresh the Current Sheet • Forward • More:Add bookmark; Find on page; Select text; Page info; Downloads; Settings; Close Install from USB Flash Drive 1. Open the“File manager” 2. Choose your USB flash drive or any other mass storage’s folder 3. Find you application, and press it 4. Press the install button 5. You can find the application in tab “Apps” after installation APPLICATIONS Download & install from Browser 1. Open the Browser. 2. Press search key and input your website address 3. Download the APK file which you like if there is a link for download (If you have problems with downloading, please make sure there is enough room in your internal storage) 4. You will find the file in your inner storage folder Install from ApkInstaller Remove Applications 1. Enter SETTINGS 2. Enter "Applications--Manage applications" 3. Find the application you want to remove in tab "All" 4. Enter the icon and press "Uninstall" 5. Press "OK" to confirm uninstall ADVANCED FEATURES 1.Enter the APP MediaSharing. You will see a list of devices that support DLNA on the left. 2.Choose the device on the left, you will see a list of media files…

Text truncated - open the document above for the full version.

BY CVT 2013-02-06 RTL8188EUS Datasheet Single-Chip IEEE 802.11b/g/n 1T1R WLAN Controller with USB Interface 5 Track ID: JATR-2265-11 Rev. 0.3 3. Application Diagram 3.1. Single-Band 11n (1x1) Solution with Single Antenna Antenna A . PA Receiver RX I/Q DAC ADC SWR/LDO Regulators 40 MHz Crystal MAC Configuration Control and Memory Ext Interface Baseband (PHY) USB2.0 Host Interface 3.3V TX I/Q 2.4 GHz Transmitter NV Memory RTL8188EUS Balun/ Filter Circuit matching Figure 1. Single-Band 11n (1x1) Solution

Guangzhou Shiyuan Electronics Co., Ltd. FCC ID: OGX-D311 POWER OF ATTORNEY Date: April 28, 2013 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on April 28, 2014. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Guangzhou Shiyuan Electronics Co., Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Guangzhou Shiyuan Electronics Co., Ltd. ................................................................................. Signature Mingfu He / Engineer ................................................................................. Typed name and Title

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Photographs - Constructional Details EUT – External View Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

FCC Label Location for model: D311, D39 The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. FCC ID: OGX-D311 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Label Sample for model: D311, D39 FCC ID: OGX-D311 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn EUT- RF module RF module

Circuit Description The device is a small sized microcomputer that instantly converts your regular TV into a smart TV Features OS: Android/4.0 CPU: ARM Cortex A9 1.0GHz Graphics: Support graphic accelerator OpenGL ES 1.1&1.2 RAM: 1GB DDR3 Nand Flash: 4GB Wifi:802.11b/g/n Ethernet support: 10/100 Mbps HDMI: V1.4a 720P/1080P Multimedia playing function consists of local playing and internet playing; a, Local playing function means that MCU(AML8726-M3) reading and decode the files from internal nand flash,external SD card or USB device. The MCU employs 32.768kHz, and 24MHz oscillators. b, Internet playing means that the device is connected to Internet via RJ45 ethernet cable or 2.4G wifi module. MCU read and decode the files from Internet, then send the decoded signal to HDMI port or AV port which connect to your TV. This is a WLAN 11n USB module which fully supports the features and functional compliance of IEEE 802.11n,e&i standards. It supports up to 150Mbps high-speed wireless network connections. It works in 2.4-2.4835GHz involved with 11 channels and the 1x1 MIMO technology improves effective throughput and range existing 802.11 b/g products.

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 DD CC BB AA 300mA C10P 22uF-0805-X5R-±20%-6.3V VDD_3.3V IN 4 EN 1 GND 2 OUT 5 SW 3 U3PLC3406CB5TR VIN_5V C11P 0.1uF-0402-Y5V-+80%-20%-16V R3P 510Kohm-0402-±1%-1/16W R4P113Kohm-0402-±1%-1/16W L2P SWPA3015S4R7MT IN 4 EN 1 GND 2 OUT 5 SW 3 U5PLC3406CB5TR R7P 143Kohm-0402-±1%-1/16W VIN_5V R8P113Kohm-0402-±1%-1/16W C17P 0.1uF-0402-Y5V-+80%-20%-16V C6P 22uF-0805-X5R-±20%-6.3V :BS3406 700mA 950mA C18P NC/22uF-0805-X5R-±20%-6.3V L4P SWPA3015S4R7MT CORE_1.35V IN 4 EN 1 GND 2 OUT 5 SW 3 U4PLC3406CB5TR R5P 150Kohm-0402-±1%-1/16W R6P100Kohm-0402-±1%-1/16W C15P 0.1uF-0402-Y5V-+80%-20%-16V C14P 22uF-0805-X5R-±20%-6.3V 610mA L3P SWPA3015S4R7MT VIN_5VDDR3_1.5V C7P 0.1uF-0402-Y5V-+80%-20%-16V C8P 0.1uF-0402-Y5V-+80%-20%-16V VSS 2 VOUT 5 VIN 1 CE 3 BYP 4 U2PAP2121AK-2.5TRE1 VDD_3.3V 150mA AVDD2.5V C9P 4.7uF-0603-X5R-±10%-10V GNDGNDGND GNDGNDGNDGND GNDGNDGND GNDGNDGNDGND IN 4 EN 1 GND 2 OUT 5 SW 3 U1PLC3406CB5TR R1P 113Kohm-0402-±1%-1/16W VIN_5V R2P100Kohm-0402-±1%-1/16W C3P 0.1uF-0402-Y5V-+80%-20%-16V C2P 22uF-0805-X5R-±20%-6.3V 350mA L1P SWPA3015S4R7MT VCC12_AO GNDGNDGND VDD_3.3V_EN VSS 2 VOUT 5 VIN 1 CE 3 BYP 4 U6PAP2125K-3.3TRG1 VIN_5V VDD3.3V_AO C20P 0.1uF-0402-Y5V-+80%-20%-16V GNDGND 1.278V 1.344V 1.50V 3.308V D1P AIES12U020R2 D2P AIES12U020R2 USBA_DP USBA_DM VIN_5V USB GNDGNDGND C4P 0.1uF-0402-Y5V-+80%-20%-16V GND GND C5P 10uF-0603-X5R-±20%-6.3V GND C1P 10uF-0603-X5R-±20%-6.3V R9P 0ohm-0402-±5%-1/16W R10P 0ohm-0402-±5%-1/16W GND GND GND C12P 22uF-0805-X5R-±20%-6.3V 1A R11P 1Kohm-0402-±5%-1/16W C13P 1uF-0402-Y5V-+80%-20%-10V GND USBA_ID C19P 10uF-0603-X5R-±20%-6.3V V 1 D- 2 D+ 3 ID 4 GND 5 GND 6 GND 7 GND 8 GND 9 CN1P 1163-205016-01 C16P 10uF-0603-X5R-±20%-6.3V PIC1P01 PIC1P02 COC1P PIC2P01 PIC2P02 COC2P PIC3P01 PIC3P02 COC3P PIC4P01 PIC4P02 COC4P PIC5P01 PIC5P02 COC5P PIC6P01 PIC6P02 COC6P PIC7P01 PIC7P02 COC7P PIC8P01 PIC8P02 COC8P PIC9P01 PIC9P02 COC9P PIC10P01 PIC10P02 COC10P PIC11P01 PIC11P02 COC11P PIC12P01 PIC12P02 COC12P PIC13P01 PIC13P02 COC13P PIC14P01 PIC14P02 COC14P PIC15P01 PIC15P02 COC15P PIC16P01 PIC16P02 COC16P PIC17P01 PIC17P02 COC17P PIC18P01 PIC18P02 COC18P PIC19P01 PIC19P02 COC19P PIC20P01 PIC20P02 COC20P PICN1P01 PICN1P02 PICN1P03 PICN1P04 PICN1P05 PICN1P06PICN1P07 PICN1P08PICN1P09 COCN1P PID1P01 PID1P02 COD1P PID2P01 PID2P02 COD2P PIL1P01PIL1P02 COL1P PIL2P01PIL2P02 COL2P PIL3P01PIL3P02 COL3P PIL4P01PIL4P02 COL4P PIR1P01 PIR1P02 COR1P PIR2P01 PIR2P02 COR2P PIR3P01 PIR3P02 COR3P PIR4P01 PIR4P02 COR4P PIR5P01 PIR5P02 COR5P PIR6P01 PIR6P02 COR6P PIR7P01 PIR7P02 COR7P PIR8P01 PIR8P02 COR8P PIR9P01PIR9P02 COR9P PIR10P01PIR10P02 COR10P PIR11P01PIR11P02 COR11P PIU1P01 PIU1P02 PIU1P03PIU1P04 PIU1P05 COU1P PIU2P01 PIU2P02 PIU2P03PIU2P04 PIU2P05 COU2P PIU3P01 PIU3P02 PIU3P03PIU3P04 PIU3P05 COU3P PIU4P01 PIU4P02 PIU4P03PIU4P04 PIU4P05 COU4P PIU5P01 PIU5P02 PIU5P03PIU5P04 PIU5P05 COU5P PIU6P01 PIU6P02 PIU6P03PIU6P04 PIU6P05 COU6P PIC8P01PIC9P02 PIU2P05 PIC6P02PIC17P01PIC18P02 PIL4P02 PIR7P02 PIC14P01PIC15P01 PIL3P02 PIR5P02 PIC1P01 PIC2P01PIC3P02 PIC4P02 PIC5P01 PIC6P01 PIC7P02PIC8P02PIC9P01 PIC10P01PIC11P02 PIC12P01PIC13P01 PIC14P02PIC15P02PIC16P01 PIC17P02PIC18P01PIC19P01 PIC20P02 PICN1P05 PICN1P06PICN1P07 PICN1P08PICN1P09 PID1P02PID2P02 PIR2P02 PIR4P01 PIR6P02 PIR8P02 PIU1P02 PIU2P02 PIU3P02 PIU4P02 PIU5P02 PIU6P02 PIC13P02 PICN1P04PIR11P02 PICN1P02 PID2P01 PIR9P02 PICN1P03 PID1P01 PIR10P02 PIL1P01PIU1P03 PIL2P01PIU3P03 PIL3P01PIU4P03 PIL4P01PIU5P03 PIR1P01 PIR2P01 PIU1P05 PIR3P01 PIR4P02 PIU3P05 PIR5P01 PIR6P01 PIU4P05 PIR7P01 PIR8P01 PIU5P05 PIU2P04 PIU6P04 PIR9P01 NLUSBA0DM PIR10P01 NLUSBA0DP PIR11P01 NLUSBA0ID PIC2P02PIC3P01 PIL1P02 PIR1P02 PIC20P01 PIU6P05 PIC7P01 PIC10P02PIC11P01 PIL2P02 PIR3P02 PIU2P01 PIU2P03 PIU3P01 NLVDD0303V0EN PIC1P02 PIC4P01 PIC5P02 PIC12P02 PIC16P02 PIC19P02 PICN1P01 PIU1P01 PIU1P04 PIU3P04 PIU4P01 PIU4P04 PIU5P01 PIU5P04 PIU6P01 PIU6P03 GND VDD3.3V_AO VCC12_AO CORE_1.35V GND VDD_3.3V B.AML8726M3.10 Board Name PCB M2M MARK M1M MARK M3M MARK M4M MARK C4M 0.1uF-0402-Y5V-+80%-20%-16V C5M 0.1uF-0402-Y5V-+80%-20%-16V C2M 4.7uF-0603-X5R-±1 0 %-10V C13M 4.7uF-0603-X5R-±1 0 %-10V C22M 0.1uF-0402-Y5V-+80%-20%-16V RESET_N R13M 100Kohm-0402-±1 % -1/16W U1M SGM809-SXN3 GND GND KEY0 VDD3.3V_AO R11M 10Kohm-0402-±5 %-1/16W R12M 1Kohm-0402-±5 %-1/16W CLK50M PWR_KEY TDO RESET_CPU TCK RESET_N VDD_3.3V CORE_1.35V VCC12_AO VCC12_AOVDD_3.3V VDD3.3V_AO GND AVDD2.5V VDD3.3V_AO GND KEY0 RMII_MDIO RMII_MDC RMII_TXD0 RMII_TXD1 RMII_TXEN RMII_RXD0 RMII_RXD1 RMII_CRS_DV RMII_RX_ERR I2S_DATA I2S_AMCLK 12S_AOCLK 12S_LRCLK HP_DET FEC_I2C_SDA_A FEC_I2C_SCL_A TP24 TP25 CARD_EN VCC5V_EN VCC12AO_SAVE VCC15_SAVE R8M 0ohm-0402-±5 %-1/16W C18M 0.1uF-0402-Y5V-+80%-20%-16V OSCOUT OSCIN R7M 100ohm-0402-±5 %-1/16W R9M 4K7ohm-0402-±5 %-1/16W R10M 1Kohm-0402-±5 %-1/16W GND AVDD2.5V C17M 0.1uF-0402-Y5V-+80%-20%-16V CARD_DET SD_D0_B SD_D1_B SD_D2_B SD_D3_B SD_CLK_B SD_CMD_B IR_IN GND GND GND TX1M RX1M C20M 0.1uF-0402-Y5V-+80%-20%-16V GND USBB_VBUS VIN_5V AVDD2.5V VDD_3.3V VIN_5V GND R4M 43R2ohm-0402-±1 % -1/16W R5M 43R2ohm-0402-±1 % -1/16W R1M 1Kohm-0402-±5 %-1/16W R3M 1Kohm-0402-±5 %-1/16W C7M 0.1uF-0402-Y5V-+80%-20%-16V USBB_DP USBB_DM USBA_DP USBA_DM GND GND GND ENC TSin A TSin C UART // PCM ISO7816 I2C SPI_IO JTAG CARD SDIO I2S ITU601 USB PLL Always ON (Lib Version:1121) ADC RTC (Always ON) RMII VDD33_EE F12 VDD12_CPU E15 VDD12_CPU F17 VDD33_EE F11 VDD12_CPU F18 VDD33_EE F6 VDD12_CPU F19 RTC_VBAT V2 RTC_XOUT U1 RTC_XIN U2 RTC_AVSS U3 RTC_GPO V6 GPIOAO_0(UART_TX_AO) U4 GPIOAO_1(UART_RX_AO) U6 GPIOAO_2(UART_CTS_AO) Y2 GPIOAO_3(UART_RTS_AO) W5 VDD12_AO V3 VDD12_AO V4 GPIOAO_4(I2C_SCK_AO // I2C_SCK_SLAVE_AO) W3 GPIOAO_5(I2C_SDA_AO // I2C_SDA_SLAVE_AO) U5 GPIOAO_6(WDT_GPO // CLK_OUT2) W2 GPIOAO_7(REMOTE_INPUT) Y5 VDD33_AO Y4 GPIOAO_8(JTAG_TCK) Y3 GPIOAO_9(JTAG_TMS) V5 GPIOAO_10(JTAG_TDI) AA3 GPIOAO_11(JTAG_TDO // CLK_OUT2) AA1 TEST_N(DDR3_RET) AA2 RESET_N AB3 USBA_ID AB2 USBA_VBUS AB4 USBA_DP AC1 USBA_VSSA AA5 USBA_DM AC2 USBA_TXRTUNE AD1 USB_VDD25 W6 USB_VDD33 AA4 USBB_V…

Text truncated - open the document above for the full version.

Reference No.: WTS13S0403191E Page 1 of 97 TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn FCC ID : OGX-D311 Applicant : Guangzhou Shiyuan Electronics Co., Ltd. Address : No.192,Kezhu Road,Science Park,Guangzhou,Guangdong,China Manufacturer : the same as above Address : the same as above Equipment Under Test (EUT) : Product Name : Android Dongle Model No. : D311, D39 Rules : FCC CFR47 Part 15 C Section 15.247:2010 Date of Test : May 2~7,2013 Date of Issue : May 7,2013 Test Result : PASS* Remark: * The sample detailed above has been tested to the requirements of FCC rules mentioned above. The test results have been reviewed against the directives above and found to meet their essential requirements. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. PERPARED BY: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West of Baima Road., Songgang Street, Bao’an District, Shenzhen, China Tel: +86-755-83551033 Fax: +86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WTS13S0403191E Page 2 of 97 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Radiated Emissions 15.205(a) 15.209(a) PASS Conducted Emissions 15.207(a) PASS 6dB Bandwidth 15.247(a)(2) PASS Maximum Peak Output Power 15.247(b)(3),(4) PASS Power Spectral Density 15.247(e) PASS Band Edge 15.247(d) PASS Emissions from out of band 15.247(d) PASS Emissions from the restricted bands 15.247(d) PASS Antenna Requirement 15.203 PASS Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WTS13S0403191E Page 3 of 97 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................................... 2 3 CONTENTS ............................................................................................................................................................. 3 4 GENERAL INFORMATION .................................................................................................................................. 5 4.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................. 5 4.2 DETAILS OF E.U.T. .......................................................................................................................................... 5 4.3 DESCRIPTION OF SUPPORT UNITS .................................................................................................................. 6 4.4 TEST FACILITY ................................................................................................................................................. 7 4.5 TEST LOCATION ............................................................................................................................................... 7 4.6 GENERAL CONDITION ...................................................................................................................................... 7 5 EQUIPMENT USED DURING TEST ................................................................................................................... 8 5.1 EQUIPMENTS LIST ........................................................................................................................................... 8 5.2 MEASUREMENT UNCERTAINTY ........................................................................................................................ 9 5.3 TEST EQUIPMENT CALIBRATION ..................................................................................................................... 9 6 CONDUCTED EMISSION ................................................................................................................................... 10 6.1 E.U.T. OPERATION ........................................................................................................................................ 10 6.2 EUT SETUP ................................................................................................................................................... 10 6.3 CONDUCTED EMISSION TEST RESULT .......................................................................................................... 11 7 RADIATED EMISSIONS ..................................................................................................................................... 13 7.1 EUT OPERATION : ......................................................................................................................................... 13 7.2 TEST SETUP .................................................................................................................................................. 14 7.3 SPECTRUM ANALYZER SETUP ...................................................................................................................... 15 7.4 TEST PROCEDURE ......................................................................................................................................... 16 7.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ..................................................................................... 16 7.6 SUMMARY OF TEST RESULTS ....................................................................................................................... 17 8 BAND EDGE MEASUREMENT ....................................................................…

Text truncated - open the document above for the full version.

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Photographs – Test Setup Conducted Emission Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Radiated Emission Test frequency below 30MHz Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Test frequency from 30MHz to 1GHz Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Test frequency above 1GHz