OJYKAG12RBS 1130 MTX Base Station

41/1531-2/HRB 106 22 UenEricsson ProprietaryB-1 R e v i e w C o p y B Agency Requirements FCC Requirements „800 MHz FCC ID #: OJYKAG-11 „1900 MHz FCC ID #: OJYKAG12 This device complies with part 22 or 24 of the FCC Rules. Operation is subject to the following conditions: „This device may cause harmful interference. „This device must accept any interference received, including interference that may cause undesired operation. FCC Class A This RBS 1130 equipment has been tested and found to comply with the limits for a Class A digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user’s own expense. Part 68, Exhibit J (Consumer Instructions) 1. This equipment complies with Part 68 of the FCC Rules and ACTA Rules. The equipment’s FCC registration number and other important information is listed on a label on this equipment. The following information must be provided to the telephone company upon request. ‰FCC Registration No: US:SMIDENANCELLOBLDR ‰Facility Interface Code (FIC): 04DU9.1SN ‰Service Order Code (SOC): 6.0Y ‰Universal Service Order Code (USOC) Jacks: RJ48C 2. An FCC-compliant telephone and modular plug are provided with this equipment. This equipment is designed to be connected to the telephone network or premises Agency Requirements B-2Ericsson Proprietary41/1531-2/HRB 106 22 Uen R e v i e w C o p y wiring using a compatible module jack that is Part 68 compliant. Refer to the equipment’s installation instructions for details. 3. If this equipment causes harm to the telephone network, the telephone company may temporarily discontinue service. If possible, they will notify the user in advance. If advance notice isn’t practical, the telephone company will notify the user as soon as possible. The user will be informed of the right to file a complaint with the FCC. 4. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this occurs, the telephone company will provide advance notice in order so the user can make the necessary modifications to maintain uninterrupted service. 5. If you experience trouble with this telephone equipment, contact Ericsson Wireless Communications Technical Assistance Center for information regarding service or repair. If the equipment is causing harm to the telephone network, the telephone company may request the equipment be disconnected until the problem is resolved. 6. This equipment cannot be used with a public coin service provided by the telephone company. Connection to Party Line Service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. UL Requirements This product meets UL Requirement UL 60950, 3rd Edition, “Safety of Information Technology Equipment.”

OJYKAG12 Manual Exhibit 4 The manual is 26 to 30meg and is available upon request.

6455 Lusk Boulevard, San Diego, CA 92121-2779 (619) 587-1121 6210 Spine Rd. Boulder, CO 80301 Federal Communication Commission April 7, 2004 Reference: FCC ID: OJYKAG12 Request for Confidentiality Pursuant to the Sections 0.457 and 0.459 of the Commission’s Rules, Ericsson Wireless Communications Inc. hereby requests confidentiality of certain aspects of the information accompanying this Application for Type Acceptance as specifically identified below: 1. Technical Description 2. System Block Diagram 3. Schematics 4. Parts List 5. Tune-up Procedure All items contain trade secrets and other proprietary information not customarily released to the general public. Public disclosure of this information would be harmful to Ericsson Wireless Communications Inc. at this time, and would provide unjustified benefits to our competitors. These materials contain proprietary intellectual property, and Ericsson is on the process of filling for patent protection on many of these items. The request for confidentiality on the Installation Manuel at this time is due to licensee testing which will be conducted after the grant is issued but before the product is released to the general public. Release of the installation instructions before formal release to the general public would expose proprietary information concerning advanced operation functions. Once the product is released to the general public the FCC will be informed the confidentiality treatment of the Installation Manuel may be removed. Ericsson understands that pursuant to Rule 0.457 disclosure of any information contained in this application will not be made before the date of grant. Regards, Keith A. Goshia Staff Regulatory Engineering Manager

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 April 14, 2004 RE: FCC ID: OJYKAG12_ATCB001255 Attention: Keith A. Goshia I have a few comments on this Application. 1. Please note that while a request for confidentiality letter was mentioned in the cover letter provided, a request for confidentiality listing the specific exhibits to be held confidential does not appear to have been actually provided. In order to hold exhibits confidential once they are on the FCC server a letter requesting confidentiality for specific exhibits must be provided. As this is a base station certain exhibits can be held confidential but a request letter for these exhibits must be provided by Ericsson. The following exhibits may be confidential: Theory of operation, Schematics, Parts list, Tune up procedure, Installation manual, internal photos, Block diagrams. All other exhibits are not confidential material. Please provide a confidentiality request letter for those items above which you desire to be held confidential. 2. Please note that the external photos include some of the internal photos. Please note that while internal photos of this system may be confidential, external photos of the system may not. Please provide an external photo exhibit of the system that do not include the internal photos (the photos shown on pages 10 and 11 of the EMC report may be sufficient for external photos). 3. Please note that the FCC ID label shows the self declaration label for a Class B device for Home or Office Use. Please note that this system does not fall under the self declaration approach of part 15 for Home or Office Use and the EMC report provided shows the device to be only 3dB under that Class A limit. As this device is only 3dB under the Class A limit and because it does not meet the Class B limit, please remove the DoC label information from the label. 4. Please note that for licensed devices a parts list of the active parts is required. Please provide the parts list for this device. 5. Please note that as yet I have not received the manual disk. Please provide at least the FCC regulatory pages of the manual. As the manual is said to be over 20Meg in file size the rest can be presented as available upon request. 6. Please note that the spurious emission of section 4.5 on page 25 of report “030925-721.pdf” appear to be radiated field strength measurements. Please note that part 24 licensed device radiated spurious emission are antenna substitution power measurements. Please explain (i.e. is the purpose of this report strictly for part 15?). Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

OJYKAG12 Exhibit 8 External Photographs OJYKAG12

@WSNVV@ØPNQS @RNYPP@ØNPPU @UWNQU@ØPNQS @RNRUP@ØNPPU ericsson@wireless@communications@incN QYP@XYMsvb@QUT@TPUORL@rev@b artwork@Hmedia@nOdIL labelL@rbs@QQSPL@QYPP@mhz@regulatory modelZ ratingZ rbs@QQSP@BQYPP@mh¡B MTX@v@@@@@@@@@@@@@@@[@QPPa@max FCCID: OJYKAG12 Complies with Part 68 of FCC/ACTA Rules US: SMIDENANCELLOBLDR listed iNtNeN eQYTVSS noteZ@dieMlines@shown@in@blueN@@die@lines@do@not@print E

Exhibit 5 OJYKAG12 All Ericsson Boards are proprietary designs and should be help confidential by ATCB and the FCC. Power Amplifier Exhibit 5 OJYKAG12 Tx Card Top side Tx Card Bottom Side Exhibit 5 OJYKAG12 Rx Card Top Side Rx Card Bottom Side Exhibit 5 OJYKAG12 RBS1130 LNA’s Capacitor Unit Digital Cello Shelf Fan Cable Tray Fan Rx-Tx Card Self Fan HPA’s Exhibit 5 OJYKAG12 LNA’s Cello Shelf Exhibit 5 OJYKAG12 Rx-Tx Card Shelf HPA Shelf. Exhibit 5 OJYKAG12 HPA with No shield covers. Exhibit 5 OJYKAG12 TX-Card No Shield Covers Exhibit 5 OJYKAG12 TR-Card No Shields

6210 Spine Rd. Boulder, CO 80301 Ph. (303)473-6956 Fax (303)437-6880 RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provide with the Ericsson RBS1130 CDMA Base Station. The calculations are from FCC OET 65 Appendix B, Table 1B Guidelines for General Population/Uncontrolled Exposure. This calculation is based on the highest EIRP possible from the system, considering maximum power and antenna gain, and considering a 1.0 mW/cm² uncontrolled exposure limit. The Friss formula used was: S = (Po*G)/(4*Pi*r²) Where S = 1.0 mW/cm² for 1900 MHz Where Po = 20,000 mW (Peak RF) Where G = Isotropic antenna gain (numeric) Where r = Minimum Safe Distance from antenna (cm) For: 16 dB gain Antenna - ............. r = 250cm

Supervised By: Thomas J. Funk RD:kg Sub-part 2.1033 (c): Equipment Identification FCC ID: OJYKAG12 Date of Report Wednesday, April 07, 2004 OJYKAG12 The applicant has been cautioned as to the following: 15.21 Information to User. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.27 (a) Special Accessories. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. OJYKAG12 Table of Contents Rule Description 2.1033 List of General Information Required 2.1046 R.F. Power Output 2.1049 Occupied Bandwidth 22.917 Emission Requirements 2.1051 Spurious Emissions at Antenna Terminals 22.917 (e) 2.1053 Field Strength of Spurious Radiation 2.1055 Frequency Stability - Temperature & Voltage Variation 2.202 (g) Necessary Bandwidth and Emission Bandwidth 2.906 Testimonial & Statement of Certification Radio Frequency Radiation Exposure Limits Exhibits: Appendix: Page OJYKAG12 List of General Information Required for Type Acceptance In Accordance with FCC Rules and Regulations, Volume II, Part 2 and to Part 24 sub-part E Sub-part 2.1033 (c)(1) Name and Address of Applicant: Ericsson Wireless Communications 6210 Spine Rd. Boulder, CO 80301 Vendor: Applicant 2.1033(c)(2): FCC ID: OJYKAG12 2.924 Model No: RBS1130, RBS1131, RBS1140 Technical Description: 2.1033(c)(4): Type of Emission: 1M25F9W 2.1033(c)(5) Frequency Range, MHz: 1930 MHz 1990 MHz 2.1033(c)(6) Power Rating, Watts: 1, 20 Switchable Adjustable x N/A 2.1033(c)(7) Maximum Power Rating, Watts: 20 2.1033(c)(8) Voltages & Currents in all Elements in Final R.F. Stage, Including Final Transistor or Solid State Device: Collector Current, A = 8.6 Amp per RF Stage Collector Voltage, Vdc = 48VDC Supply Voltage, Vac = N/A Page OJYKAG12 Exhibits 2.1033 Block Diagram: Please see Attached Exhibit 1 2.1033 Circuit Diagram: Please see Attached Exhibit 2 2.1033 Parts List: Please see Attached Exhibit 3 2.1033 Manual: Please see Attached Exhibit 4 2.1033 Photographs: Please see Attached Exhibits 5 2.1033 Tune-Up Procedure/Alignment Procedure: Please see Attached Exhibit 6 2.1033 Label Information: Please see Attached Exhibit 7 2.1033(c)(14) Test Report: Test Report Follows Page OJYKAG12 Sub-part 2.1033 (c) : Test and Measurement Data All tests and measurement data shown were performed in accordance with FCC Rules and Regulations, Volume II; Part 2, Sub-part J, Sections 2.1046, 2.1049, 2.1051, 2.1053, 2.1055 and the following individual Parts: 21 Domestic Public Radio Services 24 Personal Communications Services X 22E Broadband PCS 22.901 (d) Special Provisions for Alternative Cellular Technologies and and Auxiliary Services 23 International Fixed Public Radio Communications Service 74 Experimental, Auxiliary & Special Broadcast and Other Program Distribution Services 74H Low Power Auxiliary Stations 80 Stations in the Maritime Service 80.209 (5)(I) Transmitter Frequency Tolerances, 156–162 MHz, Coast Stations 80K Private Coast Stations & Marine Utility Stations 80S Compulsory R/T Installations for Small Passenger Boats 80T Radio Telegraph Installation Required for Vessels on the Great Lakes 80U Radio Telegraph Installation Required by the Bridge–to–Bridge Act 87 Aviation Services 90 Private Land Mobile Radio Services 94 Private Operational–Fixed microwave Services 95 General Mobile Radio Service Page OJYKAG12 General Information 1. Spurious radiation was measured at three (3) meters. 2. The normal modes of modulation are: (a) Voice (b) Wideband Data (c) SAT (d) ST (e) SAT + Voice (f) SAT + DTMF (g) 64-Ary Orthogonal CDMA X (h) Pi/4 DQPSK (i) NAMPS Voice (j) NAMPS DSAT (k) NAMPS ST Page OJYKAG12 Standard Test Conditions and Engineering Practices Except as noted herein, the following conditions and procedures were observed during the testing: Room Temperature = 25 ± 5° C Room Humidity = 20–50% D.C. Supply Voltage, Vdc = -48VDC or 24VDC A.C. Supply Voltage, Vac = 110 Vac or 220 Vac A.C. Supply Frequency, Hz = 60/50Hz Prior to testing, the E.U.T. was tuned up in accordance with the manufacturer’s alignment procedures. All external gain controls were maintained at the position of maximum and/or optimum gain throughout the testing. Measurement results, unless otherwise noted, are worst case measurements. Page OJYKAG12 Supervised By: Thomas Funk Name of Test: R.F. Power Output & Occupied Bandwidth Paragraph: 47 CFR 2.1046 & 2.1049 Guide: EIA Standard RS 152B, Paragraph 3.3 Test Condition: Standard Temperature & Humidity Test Equipment: As per Attached Appendix J Measurement Procedures 1. The E.U.T. was connected to a di…

Text truncated - open the document above for the full version.

• P.O. Box 489 • 1350 Tolland Road • Rollinsville, CO 80474 • Phone: (303) 258-0100 • FAX: (303) 258-0775 • • www.criteriontech.com • CONFIDENTIAL AND PROPRIETARY NVLAP LAB CODE 100396-0 EMC QUALIFICATION TEST REPORT ERICSSON RADIO BASE STATION, RBS 1130 MTX 1900 MHZ TESTED TO CONFORM WITH: LICENSED RADIO TRANSMITTERS FOR INFORMATION TECHNOLOGY EQUIPMENT (ITE) Test Report Number: 030925-721 Date of Issue: OCTOBER 31, 2003 Date of Test Completion: OCTOBER 4, 2003 Manufacturer’s Address: 6210 SPINE ROAD BOULDER, CO 80301 Phone: (303) 473-6956 Reviewed by: Approved by: Compliance Engineer Laboratory Director CRITERION TECHNOLOGY EMC QUALIFICATION TEST REPORT SHEET 2 OF 34 030925-721 FOR ERICSSON CONFIDENTIAL AND PROPRIETARY DISCLAIMERS This report is the confidential property of the client. For the protection of our clients and ourselves, extracts from this test report cannot be produced without prior written approval from Criterion Technology. Reproduction of the complete report can be performed at the client’s discretion. The client is aware that Criterion Technology has performed testing in accordance with the applicable standard(s). Test data is accurate within ANSI parameters for Emissions testing, unless a specific level of accuracy has been defined in writing prior to testing, by Criterion Technology and the client. Criterion Technology reports apply only to the specific Equipment Under Test (EUT) sample(s) tested under the test conditions described in this report. If the manufacturer intends to use this report as a document demonstrating compliance of this model, additional models of this product must have electrical and mechanical characteristics identical to the device tested for this report. Criterion Technology shall have no liability for any deductions, inferences, or generalizations drawn by the client or others from Criterion Technology issued reports. Total liability is limited to the amount invoiced for the testing of this EUT and the contents of this report are not warranted. Compliance with the appropriate governmental standards is the responsibility of the manufacturer. Any questions regarding this report should be directed to: Laboratory Director Criterion Technology Corp. P.O. Box 489 1350 Tolland Road Rollinsville, Colorado 80474 Phone: (303) 258-0100 Fax: (303) 258-0775 mailto:[email protected] NVLAP Note: Criterion Technology is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP) for the specific scope of accreditation under Lab Code 100396-0. Test methods included in Lab Code 100396-0 are: 12/CIS22 - IEC/CISPR22 (1997) and En 55022 (1998) 12/CIS22a - IEC/CISPR22 (1993), Amendment 1:1995 & Amendment 2: 1996 12/CIS22b - CNS13438 (1997) 12/EM02a – IEC 61000-3-2, Edition 2.1 (2001-10) and EN 61000-3-2 (2000) 12/EM03 – EN 61000-3-3 (1995) and IEC 61000-3-3 (1995) 12/F01 – ANSI C63.4 (2001) – cited in FCC Method - 47 CFR Part 15 - Digital Devices 12/F01a - Conducted Emissions, Power Lines, 150 kHz to 30 MHz 12/F01b - Radiated Emissions 12/T51 - AS/NZS 3548 12/I01 – IEC 61000-4-2 (1995) and Amendment 1 (1998) 12/I02 – IEC 61000-4-3 (1995) and Amendment 1 (1998) 12/I03 – IEC 61000-4-4 (1995) 12/I04 – IEC 61000-4-5 (1995) 12/I05 – IEC 61000-4-6 (1996) 12/I06- - IEC 61000-4-8 (1993) 12/I07 – IEC 61000-4-11 (1994) The NVLAP Logo on the front cover of this report applies only to data taken for the above test methods. This report may contain data which is not covered by the NVLAP accreditation. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. Criterion Technology has been accredited by the following groups: NVLAP, BSMI, NMi (EU Competent Body Accreditation) and Industry Canada. The National Institute for Standards and Technology (NIST) has designated Crite- rion Technology a Conformity Assessment Body (CAB) for Taiwan (BSMI # SL2-IN-E-007R). ALL CRITERION TECHNOLOGY INSTRUMENTATION AND ACCESSORIES USED TO TEST PRODUCTS FOR COMPLIANCE TO THE INDICATED STANDARDS ARE CALIBRATED REGULARLY IN ACCORDANCE WITH ISO 9001, ISO GUIDE 25, ANSI/NCSL Z540-I-1994 AND ARE TRACEABLE TO NATIONAL STANDARDS. CRITERION TECHNOLOGY EMC QUALIFICATION TEST REPORT SHEET 3 OF 34 030925-721 FOR ERICSSON CONFIDENTIAL AND PROPRIETARY TABLE OF CONTENTS 1.0 EXECUTIVE SUMMARY....................................................................................................................................................4 1.1 PURPOSE...................................................................................................................................................................................4 1.2 CONFORMITY...........................................................................................................................................................................4 1.3 EQUIPMENT UNDER TEST (EUT).............................................................................................................................................4 2.0 EMISSIONS TEST STANDARDS......................................................................................................................................5 2.1 RADIATED EMISSIONS AND SPURIOUS RADIATED EMISSIONS – 30 MHZ TO 1000 MHZ..............................................5 2.2 RADIATED EMISSIONS AND SPURIOUS EMISSIONS ABOVE 1GHZ....................................................................................6 2.3 INTENTIONAL RADIATOR AND SPURIOUS EMISSIONS.......................................................................................................7 2.4 GR-1089 RADIATED EMISSIONS - E-FIELD.......................................................................................................................8 2.5 GR-1089 RADIATED EMISSIONS – H -FIELD....................................................................................................................9 3.0 APPENDIX A: EUT PHOTOGRAPHS...................…

Text truncated - open the document above for the full version.