OJYKAG7PCS Band CDMA Base Station
Ericsson Wireless Communications
Click to zoom
Application Details
- Equipment Class
- PCB - PCS Licensed Transmitter
- Date of Grant
- Feb 14, 2001
- Application Purpose
- Original Equipment
- Date of Application
- Feb 13, 2001
- Equipment Note
- PCS Band CDMA Base Station
- Frequency Range
- 1930.75000000 - 1989.25000000
- Country
- United States
Documents & Files
Document Text
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Users Manual
Ericsson Proprietary RBS 1107 Field Guide for Release 7.5 92-F0423-1 R1 January 15, 2001 Uurprsuvqprh riwrp rvvvuvprqrpvrq t rv ruqytqrvthqhshp vt @ vpuhyyuhryvhivyvs hr qhhtrshxvq ryvts urrsuvqpr Uuvrpuytvp yyrqiurVvrqThrBr r9vr vp h VTyh uvivrq !! @ vpXv ryr8vphvDp6yy vtu rr rq Q vrqvurVvrqThrs6r vph @ vpXv ryr8vphvDp 89H6Tr %#$$Gx7yq Th9vrt86(! ! !&&( VT6 6yyqhhhqvs hvphvrqv qvpyrqiuvqprh rpsvqrvhyhq vrh vs hvs@ vpXv ryr8vphvDphqhyy vtuur rvh rr ry rr rq7 hpprvtuvhr vhyur rpvvrht rruhuvhr vhyhqurvs hvphvrqur rvh r uryqvpsvqrprhqv hqvyyirrqpvrq r qprqvuyr vh vpr rrhyrqvhhr ur vuurr r vrr vvs@ vpXv ryr 8vphvDp Ds hvvuvqprviwrppuhtrhqqr r rrhpvrurh s @ vpXv ryr8vphvDp hqur @ vp hqrh xh rur hqrh x rtvr rq hqrh xs UryrshxvriyhtrGH@ vpvurVThqpr hvur p vr Trademarks and Permissions VIDY vh rtvr rq hqrh xsUurPrB TTHvp rTHvp r8r 8 hvTTshqTyh vh r hqrh x rtvr rq hqrh xsTHvp rDpvurVThqpr hvur p vr 6yyur hqrh x rtvr rq hqrh xh r r vrsurv rrpvrr RBS 1107 Field Guide for Release 7.5, 92-F0423-1 R1, January 15, 2001 92-F0423-1Ericsson Proprietaryiii Revision History Document Revisions Uuvhhyv rvrqr vqvphyyhvhvpvrpvup rr uh qh rhqsh r ryrhrr hvhyruhprrhqvp hrpr ttrv VersionRelease DateNotes R1January 15, 2001Release 7.5 for the RBS 1107. Revision History ivEricsson Proprietary92-F0423-1 Changes to Manual Content Uuvhhyhp rhqhpp hrurvh ryrhrqGxs irr puhtrvursyyvtyhpr) If you are looking for...Refer to... 8uhtrhqrhsr ur hhyh ryrhrqi irs rursh rh qryvr rq SryrhrIr UurSryrhrIrqprvqv virqhh survvvhyhhyr 8uhtrhqrhsr sh r qryvr uhpyqr vy hssrprr hv Urpuvphy7yyrv Urpuvphy7yyrvh rqv virqhurh r vr TvtvsvphpuhtrHhhySrvv Hhhyh r rvrqvuhr rvvyrrys rhyrSr7yq ryhprSr6 rsyrp ihvhy qppuhtr 92-F0423-1Ericsson Proprietaryv Safety Summary A hsrhqur rpvsurrvrir rurr rphvur vhyyvtr hvt r vpvturrvr Warning and Caution Symbols Uu tuuvhhyursyyvth vthqphviy rprqrur prq ruvpuurhy) WARNING WARNING with this alert symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury. WARNING WARNING with this alert symbol indicates risk of electrical shock that could result in serious injury or death. CAUTION CAUTION with this alert symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. CAUTION CAUTION without an alert symbol indicates a potentially hazardous situation that, if not avoided, may result in property damage. Follow All Warnings and Instructions Ayyhyyh vthqv pvh xrqurrvrhqvpyqrqvuv hhy Qualified Personnel Only Pyrpuvphyyhyvsvrqr vprr ryh rr vrqvhyyr hr hvhvurrvr Lead-Acid Batteries Q prq rvuvqprhvyr xvtvuyrhqhpvq htrr ihr vr7hr vrsuvr rrhpurvphyuhh qryrp vphyupxuhh qhq uq trthuhh q Safety Summary viEricsson Proprietary92-F0423-1 Dangerous Voltages and Current Q prq rvuvqprhvyr xvtvuryrp vphypv pvph vtuvtu yhtrhquvtup rUur rvhqhtr sryrp vphyupxyrhqvtr hyvw qrhu 7rphrqhtr yhtrhqp rhir rrrrhsr r v qvprprqhyhhyyssvpvrvrs prqvpuh trirs r puvt Irr vr iwrpshxvqu turvtvurrvr8qpvr s rvtiwrppyq qprhu pv pvuhpyqphrsv rryrp vphyupx rvrqhhtr Q v r s vthvrhpr rr vthpurhqur rhyyvpiwrp uhhphrryrp vphyupx i uhh q RF Energy Uuvrvrtrr hrrhqph hqvhrSArr thqvsvhyyrqhqrq r yhphrr hyvw qrhu ESD Protection @ ruh r @T9rvrvrqhvqqhhtrpv pvph qqyr hqur ryrp vppr Do Not Service or Adjust Alone 9hrvr hyr vpr hqwrsrvryrh rhyvsvrq r s urrhpv`irhpphvrqirrphhiyrs rqr vthvq hq rpvhv Avoid Contact with Rotating Fans Vrph r rrrr hyshs hxvtvs rvtiwrpvpyqvtuhv hq pyuvt6vqphpvuvtshvurrvruryr Use Care in Handling Equipment Vrph ruryvqvtrvrs hpxShpxrqrvrphir hiyrUurrvrhirurhVrph rurvhyyvthqyvsvt hpx pr 92-F0423-1Ericsson Proprietaryvii Typogra…
Text truncated - open the document above for the full version.
Users Manual
Preparing the RBS SiteInstalling Conduit for the RBS 92-F0423-1Ericsson Proprietary2-9 Installing Conduit for the RBS UurS7Thvvphhppqhrrvturh hr"#vpu (pqv ph r svir vpphiyrU @ phiyrhyh phiyrhqBQTphiyrUur rrvphhppqhrpqv Vrh hprh tr iirrrpqvrrpvhyyvsurvrhxrrs yvyr rrvUur hprhhxrursvvurqvhyyhvrhvr vqrh uryr rqyhpr rurphiyrirs rurh rprprqhq vqrhpr r rprphiyr Uur rrvvti hpxrvqrvtrqyrprppqvqv rpy vPurhvvpqvvprprqurhvvpuhvrrIDhyyvtur S7THhvVvJhtr# CAUTION Using the wrong size conduit can cause misalignment of the modules in the mounting brackets. CAUTION Do not obstruct the flow of air to the rectangular opening on the bottom of the main unit support chassis. This air flow is critical to prevent overheating. Installing Conduit for the RBSPreparing the RBS Site 2-10Ericsson Proprietary92-F0423-1 Figure 2–8 Main Unit Chassis Conduit Connections Figure 2–9 Remote Unit Mounting Bracket Conduit Connections 30.7cm 4.5cm4.5cm4.5cm4.5cm4.5cm4.5cm4.6cm 12.3cm 11.8cm Fiber Fiber FiberFiberAlarms & T1/E1 Alarms & T1/E1 GPS Ground Power 8 x 1.9 cm diameter holes Air flow to this opening must remain unobstructed to prevent overheating. 5.5cm10.5cm 7cm 30cm 7.2cm Power Fiber 16cm 2 x 1.9 cm radius Preparing the RBS SiteInstalling Conduit for the RBS 92-F0423-1Ericsson Proprietary2-11 Steps To install conduit for a monopole Spqv"#vpu (s ursvir vpphiyrs urhvhq rr vvti hpxrurh vhrhpprhryuryrA ur p rpprpvyphvurhvvpuhvrrAvt r !O'htr ! hqs ur rrvvti hpxrrrAvt r !O(htr ! ! Spqv"#vpu (s r s urVQT ryrp vphyi rhxr urhvvvti hpxr " Spqv"#vpu (s r s urVQT ryrp vphyi rhxr urh vhrhpprhryuryrhqs ur rrvvt i hpxrurh vhrhpprhryuryr # Dhyyryrp vphywpvirvurr pqvvrqvhryiryurhv hqrhpu rrvvti hpxr $ Spqv"#vpu (s urihpxuhys uryhqyvrryrur r vprqrh phvvurhvvvti hpxr % Dhyy vpu!$#pqvr rhhBQT rprvr i hpxr A vs hvvvvturBQT rprvr i hpxrrrIQvvvturBQT 7 hpxrJhtr!' & Dhyyh"#J Vpqvhqhr hq pqv"#vpu (s ur BQT rprvr i hpxrurh vhrhpprhryuryrhqs ur hvvvti hpxrpqvryhrurh vhrhpprhry uryr ' Sh rv rqpqvs hyh urhvvvti hpxr ( Xhr shyypqvprpv Note Xurvhyypqvr ruhur rvhqrhr vvs phiyr hv ryvrs Steps To install conduit for a wall mounting Dhyyur hprh ! Spqv"#vpu (s ursvir vpphiyrs urhvhq rr vvti hpxrur hprhA urp rpprpvyphvur hvvpuhvrrAvt r !O'htr ! hqs ur rrvvt i hpxrrrAvt r !O(htr ! " Spqv"#vpu (s urr s urVQT ryrp vphyi rhxr urhvvvti hpxr # Spqv"#vpu (s urr s urVQT ryrp vphyi rhxr ur hprhhqs ur rrvvti hpxrur hprh $ Dhyyryrp vphywpvirvurr pqvvrqvhryiryurhv vhqrhpu rrvvti hpxr Pulling the Power CablesPreparing the RBS Site 2-12Ericsson Proprietary92-F0423-1 % Spqv"#vpu (s urihpxuhys uryhqyvrryrur r vprqrh phvvur hprhhqs urhvvvti hpxr ur hprh & Dhyy vpu!$#pqvr rhhBQT rprvr i hpxr A vs hvvvvturBQT rprvr i hpxrrrIQvvvturBQT 7 hpxrJhtr!' ' Spqv"#vpu (s urBQT rprvr i hpxrur hprhhq s urhvvvti hpxrur hprhA urp rppqv prpvyphvurhvvvti hpxrrrAvt r !O' htr ! ( Sh rv rqpqvs hyh urhvvti hpxr Xhr shyypqvprpv Note Xurvhyyurpqvr ruhur rvhqrhr vvs phiyr hv ryvrs Pulling the Power Cables Trh hrr phiyriryvrqs urVQTurhvvhqrhpu rrvrhpu rrv rv rhrh hrr phiyrGhiryurphiyrhur VQT i rhxr vqvphrurvuvpurhpuphiyrvprprq6yhhivqri yphyryrp vphypqrurvhyyvtr phiyr A urS7Tr rv rrrrUhiyr O"htr ' Steps To pull the power cables A urwpvihrhpusur rrvvti hpxrsrrqurr phiyr6XB # %"qvhrr yh tr vurr pqvhqyyv u tuur hprh yrurVQT Dsur rrvvyrrqrhyyvtrrxvyyurr phiyr ! A urwpvihurhvvvti hpxrsrrqurr phiyr vurr pqvhqyyvurVQT " Uvrurrqsurr phiyrrh urVQT ryrp vphyi rhxr hqhur wpvir WARNING DO NOT TERMINATE the power cables at the UPS at this time; this could pose a electrical shock hazard. Connect…
Text truncated - open the document above for the full version.
External Photos
Exhibit 5OJYKAG7 External Photo’s RF Sections External Photo’s Entire System
ID Label/Location Info
OJYKAG7 Appendix 7 ID Label MODEL: RATING: FCC ID: RBS 1107 1900 MHz - MAIN 200-240 V ~; 50-60 Hz; 4 A OJYKAG7 73.66 ±0.13 2.900 ±.005 ERICSSON WIRELESS COMMUNICATIONS INC. AW15-F0631-1, REV A ARTWORK (MEDIA N/D), LABEL, UL/FCC, RBS 1107 1900 MHz, MAIN This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. LISTED I.T.E. E194633 Type 4x enclosure MODEL: RATING: FCC ID: RBS 1107 1900 MHz - REMOTE 200-240 V ~; 50-60 Hz; 4 A OJYKAG7 120.65 ±0.13 4.750 ±.005 ERICSSON WIRELESS COMMUNICATIONS INC. AW15-F0631-2, REV A ARTWORK (MEDIA N/D), LABEL, UL/FCC, RBS 1107 1900 MHz, REMOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. LISTED I.T.E. E194633 Type 4x enclosure OJYKAG7 RBS1107 Label on the main RBS1107 Main Label RBS1107 Label on the RF Section RBS1107 RF Label
Internal Photos
OJYKAG7 Exhibit 5 Remote Baseband Digital Board Remote Baseband Digital Board OJYKAG7 Exhibit 5 Cam Board Cam Board OJYKAG7 Exhibit 5 Downconverter Board Downconverter Board OJYKAG7 Exhibit 5 Main Interface Main Interface OJYKAG7 Exhibit 5 Upconverter Board Upconverter Board Exhibit 5OJYKAG7 External Photo’s RF Sections External Photo’s Entire System
Parts List/Tune Up Info
OJYKAG7 Appendix 3 Parts List Parts list is available upon request. File is 10 to 15Mb and 200 pages plus. Per Conversation with Frank Cooprich on 1-16-2001.
Parts List/Tune Up Info
OJYKAG7 Appendix 6 Alignment/Tune-Up Procedure The RF Calibration table is an array of values which represent what the RBS1107 power sensor sees at a given output power level. This table is used for controlling the RBS1107's transmit power. The table's array elements are 0.5 dBm apart. Each element is a set point for a given power level. The software periodically reads the power sensor and slews the output power level towards a particular set point. For example, if the user configures the RBS1107 so that its transmit power is 43.0 dBm, the RBS1107 will adjust the output power so that the power sensor reading is within range of the 43.0 dBm set point.
RF Exposure Info
6210 Spine Rd. Boulder, CO 80301Ph. (303)473-6956 Fax (303)437-6880 RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provide with the Ericsson RBS11X7 CDMA Base Station. The calculations are from FCC OET 65 Appendix B, Table 1B Guidelines for General Population/Uncontrolled Exposure. This calculation is based on the highest EIRP possible from the system, considering maximum power and antenna gain, and considering a 1.0 mW/cm² uncontrolled exposure limit. The Friss formula used was: S = (Po*G) / (4*Pi*r²) Where S = 1.0 mW/cm² for 1900 MHz Where Po = 20W (Peak RF) Where G = Isotropic antenna gain (numeric) Where r = Minimum Safe Distance from antenna (cm) For: 16 dB gain Antenna - ............. r = 254cm (100 inches)
RF Exposure Info
(!A#!" @ vpQ vrh ThsrTh A hsrhqur rpvsurrvrir rurr rphvur vhyyvtr hvt r vpvturrvr Xh vthq8hvTiy Uu tuuvhhyursyyvth vthqphviy rprqrur prq ruvpuurhy) X6SIDIB X6SIDIBvuuvhyr iyvqvphrhrvhyyuhh q vhvuhvshvqrqpyq ryvqrhu r vvw X6SIDIB X6SIDIBvuuvhyr iyvqvphr vxsryrp vphyupxuh pyq ryvr vvw qrhu 86VUDPI 86VUDPIvuuvhyr iyvqvphrhrvhyyuhh q vhvuhvshvqrqh ryvv qr hrvw 86VUDPI 86VUDPIvuhhyr iyvqvphrhrvhyyuhh q vhvuhvshvqrqh ryv r qhhtr Ayy6yyXh vthqD pv Ayyhyyh vthqv pvh xrqurrvrhqvpyqrqvuv hhy RhyvsvrqQr ryPy Pyrpuvphyyhyvsvrqr vprr ryh rr vrqvhyyr hr hvhvurrvr Grhq6pvq7hr vr Q prq rvuvqprhvyr xvtvuyrhqhpvq htrr ihr vr7hr vrsuvr rrhpurvphyuhh qryrp vphyupxuhh qhq uq trthuhh q ThsrTh v@ vpQ vrh (!A#!" 9htr Wyhtrhq8 r Q prq rvuvqprhvyr xvtvuryrp vphypv pvph vtuvtu yhtrhquvtup rUur rvhqhtr sryrp vphyupxyrhqvtr hyvw qrhu 7rphrqhtr yhtrhqp rhir rrrrhsr r v qvprprqhyhhyyssvpvrvrs prqvpuh trirs r puvt Irr vr iwrpshxvqu turvtvurrvr8qpvr s rvtiwrppyq qprhu pv pvuhpyqphrsv rryrp vphyupx rvrqhhtr Q v r s vthvrhpr rr vthpurhqur rhyyvpiwrp uhhphrryrp vphyupx i uhh q SA@r t Uuvrvrtrr hrrhqph hqvhrSArr thqvsvhyyrqhqrq r yhphrr hyvw qrhu @T9Q rpv @ ruh r @T9rvrvrqhvqqhhtrpv pvph qqyr hqur ryrp vppr 9ITr vpr 6qw6yr 9hrvr hyr vpr hqwrsrvryrh rhyvsvrq r s urrhpv`irhpphvrqirrphhiyrs rqr vthvq hq rpvhv 6vq8hpvuShvtAh Vrph r rrrr hyshs hxvtvs rvtiwrpvpyqvtuhv hq pyuvt6vqphpvuvtshvurrvruryr Vr8h rvChqyvt@vr Vrph ruryvqvtrvrs hpxShpxrqrvrphir hiyrUurrvrhirurhVrph rurvhyyvthqyvsvt hpx pr ThsrTh (!A#!" @ vpQ vrh vv ThsrD pv nIrr vhyyryrurv vtq vthyvtuvt nIrr vhyyryrurwhpxvryphvyrurwhpxvrpvsvphyyqrvtrq s ryphv nIrr puvyhrqryrurv r r vhyyrurryruryvruh irrqvprprqhurr xvr shpr nVrphvurvhyyvt qvsvtryruryvr nDhyyhvirvhpp qhprvuurIhvhy@yrp vphy8qr PQr Qr yvrqvpqprqVr hqvhyyr ir vqrqvu h vhrhrhvhyyhvv pvhq hvr r hvtpqvv vpyqvthrhpyphv rv rrs/ "&i"s hvsvtSA r rpyvhpr 6rhHvt Uuvrvrhyvsvrs iuIivyqvtrqhq7vyqvtrq hrhphrt vrhqrsvrqv "& Iivyqvtrq6rh Uurhrhrqs uv hvr irsvrqrqq r hr p rSAr rpyvhprvhqq rrqhurvrsyvprvth rv rq iur rviyrA887 rhvpyqvthrhpyphv rv rrs / "&i" 7vyqvtrq6rh Uurhrhrqs uv hvr irsvrqrqq r hr p rvuhrh hvqvhprshyrh%rr s hyyr q vt hy r hvUurrhxpqprqr hrhpuhrhr vhyrprrq !Xhqurrhx hqvhrqr rprrq'X@DSQ
Test Report
Supervised By:Charles Beehler RD:kg Sub-part 2.1033 (c): Equipment Identification FCC ID: OJYKAG7 Date of Report February 6, 2001 OJYKAG7 The applicant has been cautioned as to the following: 15.21Information to User. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.27 (a)Special Accessories. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. OJYKAG7 Table of Contents RuleDescription 2.1033List of General Information Required 2.1046R.F. Power Output 2.1049Occupied Bandwidth 22.917Emission Requirements 2.1051Spurious Emissions at Antenna Terminals 22.917 (e) 2.1053Field Strength of Spurious Radiation 2.1055Frequency Stability - Temperature & Voltage Variation 2.202 (g)Necessary Bandwidth and Emission Bandwidth 2.906Testimonial & Statement of Certification Radio Frequency Radiation Exposure Limits Exhibits: Appendix: Page OJYKAG7 List of General Information Required for Type Acceptance In Accordance with FCC Rules and Regulations, Volume II, Part 2 and to Part 24 sub-part E Sub-part 2.1033 (c)(1)Name and Address of Applicant: Ericsson Wireless Communications 6455 Lusk Blvd. San Diego, CA 92121-1617 Vendor: Applicant 2.1033(c)(2):FCC ID:OJYKAG7 2.924Model No:RBS11X7 Where X can be either 1 or 2 Technical Description: 2.1033(c)(4):Type of Emission:1M25F9W 2.1033(c)(5)Frequency Range, MHz:1930 MHz 1990 MHz 2.1033(c)(6)Power Rating, Watts: 1, 20 Switchable Adjustable x N/A 2.1033(c)(7)Maximum Power Rating, Watts:20 2.1033(c)(8)Voltages & Currents in all Elements in Final R.F. Stage, Including Final Transistor or Solid State Device: Collector Current, A= per manual Collector Voltage, Vdc= per manual Supply Voltage, Vac = N/A Page OJYKAG7 Exhibits 2.1033 Block Diagram: Please see Attached Exhibit 1 2.1033Circuit Diagram: Please see Attached Exhibit 2 2.1033Parts List: Please see Attached Exhibit 3 2.1033Manual: Please see Attached Exhibit 4 2.1033Photographs: Please see Attached Exhibits 5 2.1033Tune-Up Procedure/Alignment Procedure: Please see Attached Exhibit 6 2.1033Label Information: Please see Attached Exhibit 7 2.1033(c)(14)Test Report: Test Report Follows Page OJYKAG7 Sub-part 2.1033 (c) :Test and Measurement Data All tests and measurement data shown were performed in accordance with FCC Rules and Regulations, Volume II; Part 2, Sub-part J, Sections 2.1046, 2.1049, 2.1051, 2.1053, 2.1055 and the following individual Parts: 21Domestic Public Radio Services 24 Personal Communications Services X 22EBroadband PCS X 22.901 (d)Special Provisions for Alternative Cellular Technologies and and Auxiliary Services 23International Fixed Public Radio Communications Service 74Experimental, Auxiliary & Special Broadcast and Other Program Distribution Services 74HLow Power Auxiliary Stations 80Stations in the Maritime Service 80.209 (5)(I) Transmitter Frequency Tolerances, 156–162 MHz, Coast Stations 80KPrivate Coast Stations & Marine Utility Stations 80SCompulsory R/T Installations for Small Passenger Boats 80TRadio Telegraph Installation Required for Vessels on the Great Lakes 80URadio Telegraph Installation Required by the Bridge–to–Bridge Act 87Aviation Services 90Private Land Mobile Radio Services 94Private Operational–Fixed microwave Services 95General Mobile Radio Service Page OJYKAG7 General Information 1.Spurious radiation was measured at three (3) meters. 2.The normal modes of modulation are: (a) Voice (b) Wideband Data (c) SAT (d) ST (e) SAT + Voice (f)SAT + DTMF (g) 64-Ary Orthogonal CDMA X (h) Pi/4 DQPSK (i)NAMPS Voice (j)NAMPS DSAT (k) NAMPS ST Page OJYKAG7 Standard Test Conditions and Engineering Practices Except as noted herein, the following conditions and procedures were observed during the testing: Room Temperature= 25 ± 5° C Room Humidity= 20–50% D.C. Supply Voltage, Vdc= N/A A.C. Supply Voltage, Vac= 230 Vac A.C. Supply Frequency, Hz= 60Hz Prior to testing, the E.U.T. was tuned up in accordance with the manufacturer’s alignment procedures. All external gain controls were maintained at the position of maximum and/or optimum gain throughout the testing. Measurement results, unless otherwise noted, are worst case measurements. Page OJYKAG7 Supervised By:Charles Beehler Name of Test:R.F. Power Output & Occupied Bandwidth Paragraph:47 CFR 2.1046 & 2.1049 Guide:EIA Standard RS 152B, Paragraph 3.3 Test Condition:Standard Temperature & Humidity Test Equipment:As per Attached Appendix J Measurement Procedures 1. The E.U.T. was connected to a directional coupler and a resistive coaxial attenuator of normal load impedance, and the modu…
Text truncated - open the document above for the full version.
Contact Information
Applicant
Keith A Goshia(Sr. Regulatory Engineering Manager)
Technical Contact
Ericsson Wireless Communications Inc.Keith A Goshia
[email protected]303 473 6956
6210 Spine Rd. · Boulder, Colorado · United States
Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 1 | 24E | 1.93 GHz - 1.99 GHz | 20 W | 1M25F9W | 2.5000000000 ppm |
Other Applications from Ericsson Wireless Communications
OJYKAG12
Apr 19, 2004RBS 1130 MTX Base Station
Equipment Class
PCB - PCS Licensed Transmitter
OJYKAG11
Mar 11, 2003RBS1130 CDMA Cellular Base Station
Equipment Class
TNB - Licensed Non-Broadcast Station Transmitter
OJYKAG10
Oct 16, 2002Radio Base Station (RBS)
Equipment Class
PCB - PCS Licensed Transmitter
OJYKAG9
Sep 23, 2002CDMA Radio Base Station (RBS)
Equipment Class
TNB - Licensed Non-Broadcast Station Transmitter
OJYKAG8
Jun 13, 2001AMPS Band CDMA Base Station
Equipment Class
TNB - Licensed Non-Broadcast Station Transmitter