OKP8015Robosapien Blue

User Manual Item No. 8015 P. 1 Introduction Congratulations on choosing the Robosapien Blue™, a sophisticated fusion of technology and personality. With a full range of dynamic motion, interactive sensors and a unique personality, Robosapien Blue™ is more than a mechanical companion; he’s a multi-functional, thinking, feeling robot with attitude! Explore Robosapien Blue™ ’s vast array of functions and programs. Mold his behavior any way you like. Be sure to read this manual carefully for a complete understanding of the many features of your new robot buddy. Product Contents: Robosapien Blue™ x1 Infra-red Remote Controller x1 Pick Up Accessory x1 For more information visit: www.wowwee.com SWEEP THUMP SWEEP THUMP HIGH 5 SELECT PICK UP STRIKE 2 SLEEP STRIKE 2 LISTEN STRIKE 3 STRIKE 3 LEF T DANCE SONIC RIGHT STRIKE 1 LEAN STRIKE 1 LEAN BURP THROW WHISTLE THROW TALK BACK PICK UP S T E P B U L L D O Z E R O O P S B A C K S T E P T U R N S T E P T U R N S T E P R E S E T D E M O 1 D E M O 2 ALL DEMO EXECUTE POWER OFF WAKE UP SWEEP THUMP SWEEP THUMP HIGH 5 SELECT PICK UP STRIKE 2 SLEEP STRIKE 2 LISTEN STRIKE 3 STRIKE 3 LEF T DANCE SONIC RIGHT STRIKE 1 LEAN STRIKE 1 LEAN BURP THROW WHISTLE THROW TALK BACK PICK UP S T E P B U L L D O Z E R O O P S B A C K S T E P R O A R R E S E T T U R N S T E P T U R N S T E P D E M O 1 D E M O 2 ALL DEMO EXECUTE POWER OFF WAKE UP Robosapien Blue™ Remote Controller Pick Up Accessory P. 2 Content Introduction & Contents P.1-2 Battery Details P.3 Robosapien Blue™ Overview P.4 Robosapien Blue™ Operation Overview P.5 Controller Index P.6 RED Commands - Upper Controller P.7 RED Commands - Middle & Lower Controller P.8 GREEN Commands - Upper Controller P.9 GREEN Commands - Middle & Lower Controller P.10 ORANGE Commands - Upper Controller P.11 ORANGE Commands - Middle & Lower Controller P.12 Programming Mode - Touch Sensors P.13 Programming Mode - Sonic Sensor P.14 Programming Mode - Master Command P.15 Troubleshooting Guide P.16 Warranty P.17 App Functionality P.19 P. 3 Battery Detail BATTERY REQUIREMENTS: Your robot is powered by 4 x “D” size Alkaline batteries (2 batteries in each foot - not included). Your remote controller is powered by 3 x “AAA” batteries (not included). BATTERY INSTALLATION: • Be sure the robot power button is in the OFF position (OUT) before installing or changing batteries. • Remove the battery covers with a Phillips/crosshead screwdriver as shown (not included). • Install recommended batteries as shown, making sure battery polarity is correct (batteries not included). • Replace battery doors and carefully tighten all screws. LOW BATTERY INDICATORS: When Robosapien Blue™’s batteries grow weak, your Robosapien Blue™ will move and walk very slowly. - When this occurs, power robot OFF and replace all batteries. When the remote controller’s batteries grow weak, the indicator light will shine very dimly. - When this occurs, replace all the batteries in the remote controller. • Robot will just stop when battery power gets VERY low. Power off and replace all batteries. • Some lighting or sunlight can interfere with infra-red signals. IMPORTANT BATTERY INFORMATION: • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries [standard (Carbon-Zinc), Alkaline or rechargeable] or rechargeable batteries of different capacities. • Remove rechargeable batteries from the toy before recharging them. • Rechargeable batteries are only to be charged under adult supervision. • Please respect the correct polarity, (+) and (-). • Do not try to recharge non-rechargeable batteries. • Do not throw batteries into the fire. • Replace all batteries of the same type/brand at the same time. • The supply terminals are not to be short-circuited. • Remove exhausted batteries from the toy. • Batteries should be replaced by adults. • Remove batteries if the toy is not going to be played with for some time. 1.5V "D" LR20 UM1 1.5V "D" LR20 UM1 1.5V "D" LR20 UM1 1.5V "D" LR20 UM1 Robosapien Blue™ : Base of feet Remote Controller: Bottom view 1.5V "AAA" LR03 UM4 1.5V "AAA" LR03 UM4 1.5V "AAA" LR03 UM4 NOTE P. 4 Robosapien Blue ™ Overview 1. Infra-Red Receiver Always point the Controller towards Robosapien Blue™’s head. 2. Eye Lights Blink and move when he executes a command. Look in Robosapien Blue™’s eyes to see what he is “thinking”. 3. Sonic Sensor Senses sounds when in LISTEN mode. 4. Foot Sensors (Both feet) Sense any touch to the front or back of the foot. 6. Palm Lights (Both hands) Light up when you move an arm or when you press STOP. 5. Hand Sensors (Both hands) Sense touch at the tips of the longest fingers. NOTE: Always point the Controller at Robosapien Blue™’s head. P. 5 Where is Robosapien Blue™’s power switch? • The power switch is located on the robot’s back, below the right shoulder blade. • Press once to turn ON. Robosapien Blue™ will awaken with a yawn, a stretch and then say “Uh-huh.” Robosapien Blue™ is now ready for your commands. How do I access the levels of commands on the Controller? • By using the SELECT button! The Select buttons works just like the CAPS LOCK on a computer keyboard. Every controller button can do at least three different things. Pressing the Select button once (controller displays a green light) activates all the GREEN commands on the remote. Pressing the Select button twice (controller displays an orange light) activates all the ORANGE commands. What are the RED command buttons for? • The red commands on the upper sections of the controller directly control Robosapien Blue™’s movements (arms and legs). For further information see page 7. • The red commands on the lower section of the controller are used for programming your Robosapien Blue™ - for detailed information see page 13 to 15. What are the GREEN command buttons for? • The green commands on the upper sections of the controller execute combination actions (Pick Up, Throw). For further information see page …

Text truncated - open the document above for the full version.

Request for Confidentiality Date: May 08, 2015 Subject: Confidentiality Request for: FCC ID: OKP8015 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ WowWee Group Limited has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180 ) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Dennis Tsoi (Signature/Title 3 ) (Print name)

Authority to Act as Agent Date: May 08, 2015 To Whom It May Concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Vicky Yuan in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all matters relating to all processes required in FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: May 07, 2016 By: Dennis Tsoi (Signature) (Print name) Title: Quality Assurance Manager On behalf of: WowWee Group Limited (Company Name) Telephone: 852-2739-5288

1 Photographs - EUT Constructional Details Test model No.:8015

1 Photographs - EUT Constructional Details Test model No.:8015

Client: Wow wee Date: 2015/05/06 Product Name: Robosapien Blue tooth Prepared by : Bin Jiang 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Model No.: #8015 Ver: 00 HMB-01 Rev:00 Product Name: Robosapien Blue tooth Prepared by : Bin JiangVer: 00 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Model No.: #8015Client: Wow wee Date: 2015/05/06 HMD-15 Rev:00 14MM 13.5MM Client: Wow wee Date: 2015/05/06Prepared by : Bin Jiang Product Name: Robosapien Blue tooth 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Model No.: #8015 Ver: 00 HMD-14 Rev:00 62.0mm 152.mm 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Model No.: #8015 Ver: 00 Client: Wow wee Product Name: Robosapien Blue tooth Date: 2015/05/06Prepared by : Bin Jiang HMD-13 Rev:00 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Model No.: #8015 Ver: 00 Client: Wow wee Product Name: Robosapien Blue tooth Date: 2015/05/06Prepared by : Bin Jiang HMD-02 Rev:00 14.0mm 30.0mm Client: Wow wee Product Name: Robosapien Blue tooth Date: 2015/05/06Prepared by : Bin Jiang 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Model No.: #8015 Ver: 00 HMD-03 Rev:00 Date: 2015/05/06 Prepared by : Bin JiangVer: 00 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Model No.: #8015Client: Wow wee Product Name: Robosapien Blue tooth HMD-04 Rev:00 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Model No.: #8015Client: Wow wee Product Name: Robosapien Blue tooth Ver: 00Date: 2015/05/06Prepared by : Bin Jiang HMD-05 Rev:00 10.0mm 24.0mm Date: 2015/05/06Prepared by : Bin JiangVer: 00 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Model No.: #8015Client: Wow wee Product Name: Robosapien Blue tooth HMD-07 Rev:00 R=5.5mm Product Name: Robosapien Blue tooth V er: 00Prepared by : Bin Jiang 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Client:Wow wee Model No.: #8015 Date: 2015/05/06 HMB-01 Rev:00 Product Name: Robosapien Blue tooth 旭 日 實 業 有 限 公 司 EARLY LIGHT INDUSTRIAL CO., LTD. Client:Wow wee Model No.: #8015 Date: 2015/05/06 Ver: 00Prepared by : Bin Jiang HMD-14 Rev:00 10uF

2015/04/23 Keys Unit Position 1 pcs 2 pcs RX IC PCB 3 pcs U2 4 pcs RX MAIN PCB 5 pcs 6 pcs U3 7 pcs U3 8 pcs U4 9 pcs 23A1 10 pcs R2 11 pcs R22 12 pcs R19 13 pcs R1A.R23A 14 pcs R10-R11 15 pcs R4-R9 16 pcs R3 17 pcs R27 18 pcs R22 19 pcs R13.R20 20 pcs R15 21 pcs R14.R21.R24.R25 22 pcs R18 23 pcs R12 24 pcs R26 25 pcs R17 26 pcs R16 27 pcs D3-D8 28 pcs C30 29 pcs C3-5.9.10-13.15.17.23.24.26.29 30 pcs C6.C7 31 pcs D1 32 pcs Q3.Q4.Q5 33 pcs Q2.Q6 34 pcs Q7.Q8 35 pcs Q1A,Q1 36 pcs U1 37 pcs D9 Customer Item Name: Part Number Item Name Usage/product Customer Item No: Bill of Material 8015 Robosapien Blue tooth version Date Bonding IC GPC251A1-474B 1.0000 RX Main PCBA AssyCopper Foil/ Adhesive tape 15mm*12mm* 0.045mm(ROHS) 700-3808081-G01 1.0000 799-38C0000-G01 Bluetooth Module KNRF51822_A24 Flash 256 KB V3 (RoHS) 1.0000 730-3808015-G01 Main PCB HMB-01 Rev:00 FR4 D/S 1.2mm GP 88X53.2mm RoHS) 730-3808081-GD0 COB PCB HMD-13Rev:00 FR4 S/S 0.6mm GP 18 X 17.8mm (RoHS) 1.00001.0000 722-3808081-061 Chip Resistor 0 Ohm +/-5% 1/8W 0805 (RoHS) 1.0000 723-0MD6770-G01 SMT IC MD6770G(RoHS) Package QFN- 48 0.0000 723-HC164MX-G01 SMT IC 74HC164MX SO14 Brand : NXP (RoHS) 1.0000 738-2010R01-G01 Chip Resistor 10 Ohm +/-5% 1/16W 0603 (RoHS) 1.0000 738-204R702-G02 Chip Resistor 4.7 Ohm +/-5% 1/10W 0805 (RoHS) 723-D6770AG-G01 SMT IC MD6770AG(RoHS) Package QFN- 48 1.00001.0000 738-2000R03-G01 Chip Resistor 0 Ohm +/-5% 1/16W 0603 (RoHS) 6.0000 738-2051R01-G01 Chip Resistor 51 Ohm +/-5% 1/16W 0603 (RoHS) 1.0000 738-2330R01-G01 Chip Resistor 330 Ohm +/-5% 1/16W 0603 (RoHS) 2.0000 738-202K201-G01 Chip Resistor 2.2K Ohm +/-5% 1/16W 0603 (RoHS) 1.0000 738-2270R01-G01 Chip Resistor 270 Ohm +/-5% 1/16W 0603(RoHS) 738-2051R02-G01 Chip Resistor 51 Ohm +/-5% 1/10W 0805(RoHS) 2.00001.0000 738-2000R01-G03 Chip Resistor 10K Ohm +/-5% 1/16W 0603 (RoHS) 4.0000 738-2001K01-G01 Chip Resistor 1K Ohm +/-5% 1/16W 0603 (RoHS) 1.0000 738-206K801-G01 Chip Resistor 6.8K Ohm +/-5% 1/16W 0603 (RoHS) 1.0000 738-2047K01-G01 Chip Resistor 47K Ohm +/-5% 1/16W 0603 (RoHS) 1.0000 738-2022K01-G01 Chip Resistor 22K Ohm +/-5% 1/16W 0603 (RoHS) 738-204K701-G01 Chip Resistor 4.7K Ohm +/-5% 1/16W 0603 (RoHS) 2.00001.0000 738-2010K01-G01 SMD Diode LL4148 (RoHS) 6.0000 738-2056K01-G01 Chip Resistor 56K Ohm +/-5% 1/16W 0603(RoHS) 1.0000 738-204M701-G01 Chip Resistor 4.7M Ohm +/- 5% 1/16W 0603 (RoHS) 1.0000 707-4104050-G06 CHIP C CAP 0.1uF +80/-20% 50V Y5V 0603 (RoHS) 13.0000 707-1475010-G01 Chip C CAP 4.7uF +/-20% 10V X7R 0603 (RoHS) 738-2220K01-G01 Chip Resistor 220K Ohm +/-5% 1/16W 0603 (RoHS) 1.00001.0000 714-2LL4148-G00707-4033050-G02 CHIP C CAP 33PF +/-5% 50V NPO 0603 (ROHS) 2.0000 750-4003906-G01 Chip Transistor HMBT3906 SOT-23 PNP (RoHS) 3.0000 750-408550D-G01 Chip Transistor 8550D SOT-23 PNP (RoHS) 714-200DCM1-G00 Chip Diode DC M1(P/N) Io=1.0AmPS,Vrrm=50v (RoHS) 1.00002.0000 750-4003904-G01 Chip Transistor HMBT3904 SOT-23 BCE NPN (RoHS) 2.0000 (HOLTEK) IC #HT7533-1 (TO-92-LF)(RoHS) 1.0000 750-408050D-G01 Chip Transistor 8050D SOT-23 (RoHS) 2.0000 Zener Diode 6.8V 1/2W +/-5% (RoHS) 1.0000 723-HT75331-G01716-X55C6V8-G00 2015/04/23 Keys Unit Position Customer Item Name: Part Number Item Name Usage/product Customer Item No: Bill of Material 8015 Robosapien Blue tooth version Date 38 pcs D10 39 pcs C11 40 pcs C1,C2,C8,C14,C16,C25 41 pcs Y1 42 pcs D2,D3 43 pcs L&R shoulder& 44 pcs L&R Hand 45 pcs Head 46 pcs C-VDD-SW-R 47 pcs Power &SPK 48 pcs L-LEG 49 pcs Waist 50 pcs R-LEG 51 pcs MIC 52 pcs Mic 53 pcs Power SWitch PCB 54 pcs Power Switch 55 pcs Power wirepcs 56 pcs Left&F&B feet 57 pcs Left foot wire 58 pcs L Foot sensor 59 pcs left foot 60 pcs Right hand contact PCB. 61 pcs R Hand motor 62 pcs R Hand 電覽線 63 pcs R Hand LED 64 pcs R finger 65 pcs R Hand elbow Zener Diode BZX55C6V2 1/2W 6.2V +/-5% (RoHS) 1.0000 E-CAP 100μF +/-20% 10V Size:5X7 (RoHS+PET) 6.0000 E-CAP 47uF +/-20% 10V SIZE:4X7mm (RoHS+PET) 1.0000 Schottky Diode 1N5817 (RoHS) 2.0000 WAFER PH=2.0 180°C JS-1125-08 White P/N:E6008-7241 (RoHS) 2.0000 Ceramic Resonator 4.00MHz+/-0.5% 2pin (RoHS) 1.0000 WAFER PH=2.0 180°C JS-1125-04 Brown P/N:E6008-7246 (RoHS)WAFER PH=2.0 180°C JS-1125-04 White P/N:E6008-7239 (RoHS) 3.00001.0000 WAFER PH=2.0 180°C JS-1125-10 White P/N:E6008-7242 (RoHS) 1.0000 WAFER PH=2.0 180°C JS-1125-02 brown P/N:E6008-7243 (RoHS) 1.0000 WAFER PH=2.0 180°C JS-1125-02 black P/N:E6008-7244 (RoHS) 1.0000 WAFER PH=2.0 180°C JS-1125-07 White P/N:E6008-7249 (RoHS) 1.0000 711-1087230-G02 2C shield wire OD 2.2mm Grey：7x0.8mm L=160mm (RoH S+7P) 1.0000 729-280H58M-G01 Microphone Dia=9.7X6.7mm 2.2KOHM 4.5V P/N:EM-80H-58M (RoHS) WAFER PH=2.0 180°C JS-1125-02 White P/N:E6008-7238 (RoHS) 1.00001.0000 Microphone PCBA Assy (RoHS)Power Switch PCBA Assy. (RoHS)L Feet PCBA Assy. (RoHS) 1.0000 730-3808081-G43 Switch PCB HMD-04 Rev:00 94V0 S/S 1.6mm NP 30X17mm (RoHS) 1.0000 711-1087248-G02 7Pin Housing PH=2.0 with wire #26 7x0.16 L=138mm Bn.Gn/Bn/Rd/Yel/Org/Org (RoHS+7P) 1.0000 711-1087222-G03 4Pin Housing PH=2.0 W/wire 17x0.16X4C L=328mm Pur/Bk/Gn/Gn (RoHS+7P) 1.0000 730-3808081-G33 PCB HMD-03 Rev:00 94V0 S/S 1.6mm GP 12X40mm (RoHS) 746-4PS2E06-G01 Push Switch PS-2E06 (SENSEN) (RoHS) 1.00002.0000 742-0LY6983-G00 Square Rubber key P/N:LY6983 (RoHS) 4.0000 R Hand contact PCBA Assy. (RoHS)WAFER PH=2.0 180°C JS-1125-02 Grey (RoHS) 705-0228176-G08 Twin PVC wire#28 7x0.12 L=176mm Bn/Bn (RoHS+7P) 1.00001.0000 730-3808081-G23 PCB HMD-02 Rev:00 94V0 S/S 1.6mm GP 30X14mm (RoHS) 1.0000 L Hand contact PCBA Assy. (RoHS) 712-1087243-G01 WAFER PH=2.0 180°C JS-1125-02 brown P/N:E6008-7243 (RoHS) 1.0000 712-1087244-G01 WAFER PH=2.0 180°C JS-1125-02 black P/N:E6008-7244 (RoHS) 1.0000 712-1087238-G01 WAFER PH=2.0 180°C JS-1125-02 White P/N:E6008-7238 (RoHS) 1.0000 714-01N5817-G00712-1087239-G01716-X55C6V2-G01707-0476010-G12707-0107010-G16741-0400MHZ-G01712-1087241-G01712-1087242-G01712-1087246-G01712-1087249-G01712-1087243-G01712-1087238-G01712-1087244-G01 711-120060X-G02 Housing 8P PH2.0 W/PU wire Blue OD 4.3mm L= …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM150400199403 Page: 1 of 6 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1504001994CR Applicant: WowWee Group Limited Manufacturer: WowWee Group Limited Factory: Shao Guan Early Light International Co., Ltd Product Name: Robosapien Blue Model No.(EUT): 8015 Trade Mark: WowWee FCC ID: OKP8015 Standards: 47 CFR Part 1.1307 (2014) 47 CFR Part 2.1093 (2014) KDB447498D01 General RF Exposure Guidance v05r02 Date of Receipt: 2015-04-23 Date of Test: 2015-04-29 to 2015-05-05 Date of Issue: 2015-05-08 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM150400199403 Page: 2 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-05-08 Original Authorized for issue by: Tested By 2015-05-05 (Eric Fu) /Project Engineer Date Prepared By 2015-05-08 (Hedy Wen) /Clerk Date Checked By 2015-05-08 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM150400199403 Page: 3 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Contents Page 1 COVER PAGE ..................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM150400199402 Page: 1 of 51 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1504001994CR Applicant: WowWee Group Limited Manufacturer: WowWee Group Limited Factory: Shao Guan Early Light International Co., Ltd Product Name: Robosapien Blue Model No.(EUT): 8015 Trade Mark: WowWee FCC ID: OKP8015 Standards: 47 CFR Part 15, Subpart C (2014) Date of Receipt: 2015-04-23 Date of Test: 2015-04-29 to 2015-05-05 Date of Issue: 2015-05-08 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM150400199402 Page: 2 of 51 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-05-08 Original Authorized for issue by: Tested By 2015-05-05 (Eric Fu) /Project Engineer Date Prepared By 2015-05-08 (Hedy Wen) /Clerk Date Checked By 2015-05-08 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM150400199402 Page: 3 of 51 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2009 PASS Conducted Peak Output Power 47 C…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: 8015 1.1 Radiated Emission 1.2 Radiated Spurious Emission