OKUCAB0631Bluetooth Speaker

Plug the included AC/DC power adapter into the DC POWER INPUT on the unit and an AC power outlet to power the unit. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet. • Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur. • Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Les piles ne doivent pas êtr e exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres choses de semblable. • Caution marking is located at the rear or bottom of the apparatus. Attention marquage est situé sur le paneau arrière ou inférieur de l’unité. • The marking information is located at the rear or bottom of apparatus. Le marquage est situé sur le paneau arrière ou inférieur de l’unité. 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 1 1.Only use attachments/accessories specified by the manufacturer . 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer , or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way , such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • AverTIssemeNT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. • CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. • WA rNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • WArNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining. • WA rNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. • CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent. • WArNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries. • WArNING: The remote control’…

Text truncated - open the document above for the full version.

Shenzhen Junlan Electronic Ltd District 2 type A plant in the second layer 1-4, NO.2 Industria Fuyuan Baoan Shenzhen China DATE :2012-12-20 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Hans.Hu of Global United Technology Services Co., Ltd. 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Shenzhen Junlan Electronic Ltd and District 2 type A plant in the second layer 1-4, NO.2 Industria Fuyuan Baoan Shenzhen China Dated this / Day of 12/20/2012 / Agency agreement expiration date: 12/20/2013 By: Peng Xiao Signature Printed Title: safety engineer On behalf of : Shenzhen Junlan Electronic Ltd Telephone: 0755-27309169

Differences Declaration To whom concern, We Shenzhen Junlan Electronic Ltd hereby declares: The product model(s) CAB-0631, ISB563, ISB563S are identical in the same PCB layout, interior structure and electrical circuits with the model ISB563B which tested in Global United Technology Services Co., Ltd., the only differences are the model name for commercial purpose. Authorized signature: Date: 2012-12-20

Shenzhen Junlan Electronic Ltd District 2 type A plant in the second layer 1-4, NO.2 Industria Fuyuan Baoan Shenzhen China 2012-12-20 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: OKUCAB0631 Product Name: Bluetooth Speaker Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operational Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 12/20/2012 By: Peng Xiao Signature Printed Title: safety engineer On behalf of : Shenzhen Junlan Electronic Ltd Telephone: 0755-27309169

Global United Technology Services Co., Ltd. Report No.: GTSE12120147201 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” Page FCC REPORT Applicant: Shenzhen Junlan Electronic Ltd Address of Applicant: Dist. 2 type A plant in the second layer 1-4, NO.2 Industrial, Fuyuan Tangwei Shenzhen China Equipment Under Test (EUT) Product Name: Bluetooth Speaker Model No.: ISB563B, CAB-0631, ISB563, ISB563S Trade Mark: FCC ID: OKUCAB0631 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2011 Date of sample receipt: December 08, 2012 Date of Test: December 10-19, 2012 Date of report issued: December 19, 2012 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE12120147201 Global United Technology Services Co., Ltd. Project No.: GTSE121201472RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 31 2 Version Version No. Date Description 00 December 19, 2012 Original Prepared By: Date: December 19, 2012 Project Engineer Check By: Date: December 19, 2012 Reviewer Report No.: GTSE12120147201 Global United Technology Services Co., Ltd. Project No.: GTSE121201472RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 31 3 Contents Page 1 COVER PAGE............................................................................................................................................ 1 2VERSION .................................................................................................................................................. 2 3CONTENTS .............................................................................................................................................. 3 4TEST SUMMARY ..................................................................................................................................... 4 5GENERAL INFORMATION ...................................................................................................................... 5 5.1C LIENT INFORMATION......................................................................................................................... 5 5.2G ENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3T EST MODE........................................................................................................................................ 7 5.4D ESCRIPTION OF SUPPORT UNITS....................................................................................................... 7 5.5T EST FACILITY.................................................................................................................................... 7 5.6T EST LOCATION................................................................................................................................. 7 5.7O THER INFORMATION REQUESTED BY THE CUSTOMER......................................................................... 7 6TEST INSTRUMENTS LIST ..................................................................................................................... 8 7TEST RESULTS AND MEASUREMENT DATA...................................................................................... 9 7.1A NTENNA REQUIREMENT:.................................................................................................................... 9 7.2C ONDUCTED EMISSIONS................................................................................................................... 10 7.3R ADIATED EMISSION METHOD........................................................................................................... 13 7.3.1Field Strength of The Fundamental Signal................................................................................ 15 7.3.2Spurious emissions.................................................................................................................... 16 7.3.3Bandedge emissions.................................................................................................................. 20 7.420 DB OCCUPY BANDWIDTH.............................................................................................................. 21 8TEST SETUP PHOTO ............................................................................................................................ 23 9EUT CONSTRUCTIONAL DETAILS ..............................................................…

Text truncated - open the document above for the full version.