OKUCAB1819BLUETOOTH CLOCK RADIO WITH USB CHARGING

SCR 1997 OPERATING INSTRUCTIONS BLUETOOTH CLOCK RADIO WITH USB CHARGING The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. All other trademarks and trade names are those of their respective owners. ® 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN SEE BOTTOM OF UNIT FOR GRAPHIC SYMBOLS The exclamation point within a triangle alerts you to the presence of important operating, maintenance and servicing instructions in this user’s manual. The lightning flash with an arrowhead within a triangle alerts you to uninsulated dangerous voltage within the product’s enclosure that could cause an electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • This unit shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. • Do not overload wall outlet. Use only power source as indicated. • Use replacement part as specified by the manufacturer. • Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction 3 PRECAUTIONS Safety Information 1. In order to shut off the power of this product completely, unplug the power cord from the wall outlet or remove the connected USB cable. Be sure to unplug the unit and remove all power supply such as USB cable or dry batteries if you do not intend to use it for an extended period of time, such as while on vacation. 2.If this product develops trouble, contact a qualified service center, and do not use the product in a defective state. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. BEFORE USE 1. Remove all packaging materials from unit. Check to make sure that you have removed all included components before discarding the box and packing. 2.Choose unit installation location carefully. A void placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors. 3. Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact your dealer. 4.When removing the power plug from the wall outlet, always pull directly on the plug, never pull the cord. 5.Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth. 6.Keep this manual in a safe place for future reference. 4 PROdUCT FEA TURES • Bluetooth ® with hands-free function • Dimmer function • Sleep timer function • FM digital tuner with 20 presets • Dual alarm clock function — Wake to Radio/Buzzer • Snooze function • Auxiliary input • USB charge LOCA TION OF CONTROLS T OP vIEW REAR vIEW MIC MO ST 1 2 3 4 6 7 8 10 11 13141512 5. LED display 1. Memory/ Set button 2. Power/ Function button 3./ / MO/ST button (Play/pause/hands-free/mono/stereo) 4. Preset button 6. Snooze/ Sleep/ Dimmer button 7. Built-in microphone 8.Tune up/ Next button 9. Volume +/ Alarm 1 button 10. Volume -/ Alarm 2 button 11.Tune down/ Previous button 12. FM antenna button 13. USB charging port 14. AUX IN jack 15. DC IN jack 9 5 5 LEd dISPLA Y AL1: Icon lights when Alarm 1 is on. AL2: Icon lights when Alarm 2 is on. PM: PM time indicator FM: FM indicator POWER SOURCE The unit is designed to be operated by using the included AC adaptor . 2 x 1.5 V “AAA” batteries (not included) are also required for the clock, radio, preset and alarm memory backup. CONNECTING THE POWER AdAPTOR 1. Plug one end of the power adaptor into the DC in jack on the rear of the unit. 2. Connect the AC plug of the AC/DC adaptor to 100-240 V ~ 50/60 Hz power source. NOTE: Disconnect the power adaptor when the unit is not used for a long period of time. BATTERY INSTALLATION 1. Unscrew to open the battery door on the bottom of the cabinet. 2. Inser…

Text truncated - open the document above for the full version.

Differences Declaration To whom concern, We Shenzhen Junlan Electronic Ltd hereby declares: The product model(s) CAB-1819, CAB-1869, CR1997, CR1997-PL, SCR1997-PL, CR1997-P, PSCR1997, PCR1997, SCR1997-P are identical in the same PCB layout, interior structure and electrical circuits with the model SCR1997 which tested in Global United Technology Services Co., Ltd., the only differences are the model name for commercial purpose. Authorized signature: Date: 2013-05-08

Shenzhen Junlan Electronic Ltd Date (dd/mm/yyyy) 05/08/2013 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Shenzhen Junlan Electronic Ltd (address: District 2 type A plant in the second layer 1-4, NO.2 Industrial Fuyuan Tangwei Fuyong Baoan Shenzhen China), hereby authorize Hans.hu (Company name: Global United Technology Services Co., Ltd. Address: 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong ) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 05/08/2014 Yours sincerely, Company Officer: safety engineer / Peng Xiao Telephone Number: 0755-27309169 Email: [email protected]

Shenzhen Junlan Electronic Ltd Date (dd/mm/yyyy) 05/08/2013 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: OKUCAB1819 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Shenzhen Junlan Electronic Ltd hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: safety engineer / Peng Xiao Telephone Number: 0755-27309169 Email: [email protected]

Universal Docking Digital Clock Radio USB CHARGE FM 87.5MHz-108.0MHz AC Adaptor: 5V 2A Backup Battery: 2× “AAA” (UM-4) Made In China CAB-09166 4530 BLUETOOTH CLOCK RADIO WITH USB CHARGING Power Input: DC 5V 2A MODEL: SCR1997-BLACK This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: OKUCAB1819 Imported by Curtis International Ltd. Apr2013 4000 用于备损机20台 4/4 085846578249 TO TO 流水号贴纸 (白底黑字) SIZE:40*15MM 格式:Code 39 单机数量：2PC 用于贴机器/彩盒 S/N:A1304093800000001 S/N:A1304093800004001 S/N:A1304093800004000 S/N:A1304093800004020 40 mm 1 5 m m PO#0009380 JLE13230 贴纸位置图 U n i v e r s a l D o c k i n g D i g i t a l C l o c k R a d i o U S B C H A R G E F M 8 7 . 5 M H z - 1 0 8 . 0 M H z A C A d a p t o r : 5 V 2 A B a c k u p B a t t e r y : 2 × “ A A A ” ( U M - 4 ) M a d e I n C h i n a B L U E T O O T H C L O C K R A D I O W I T H U S B C H A R G I N G P o w e r I n p u t : D C 5 V 2 A M O D E L : S C R 1 9 9 7 - B L A C K T h i s d e v i c e c o m p l i e s w i t h p a r t 1 5 o f t h e F C C R u l e s . O p e r a t i o n i s s u b j e c t t o t h e f o l l o w i n g t w o c o n d i t i o n s : ( 1 ) T h i s d e v i c e m a y n o t c a u s e h a r m f u l i n t e r f e r e n c e , a n d ( 2 ) t h i s d e v i c e m u s t a c c e p t a n y i n t e r f e r e n c e r e c e i v e d , i n c l u d i n g i n t e r f e r e n c e t h a t m a y c a u s e u n d e s i r e d o p e r a t i o n . F C C I D : O K U C A B 1 8 1 9 I m p o r t e d b y C u r t i s I n t e r n a t i o n a l L t d . S / N : A 1 3 0 4 0 9 3 8 0 0 0 0 0 0 0 1 A p r 2 0 1 3 13230 CAB-1819 Curtis SCR1997-BLACK 张富兴 贴纸 S/N:A1304093450000001 流水号贴纸位置（彩盒底部）

Global United Technology Services Co., Ltd. Global United Technology Services Co., Ltd.Project No.: GTSE130400399RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 1 FCC ID:OKUCAB1819 The device has a standalone transmission. According to KDB 447498 section 4.3.1, the 1-g SAR test exclusion thresholds at test separation distances≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)] ≤ 3.0 The maximum tune-up limit power is 0.1611mW@ 2.480GHz For the head and body SAR, use 5mm as the conservative minimum test separation distance, [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)] =0.051≤ 3.0 So standalone SAR measurements are not required for both head and body.

Global United Technology Services Co., Ltd. Report No.: GTSE13040039901 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” FCC REPORT Applicant: Shenzhen Junlan Electronic Ltd Address of Applicant: District 2 type A plant in the second layer 1-4, NO.2 Industrial Fuyuan Tangwei Fuyong Baoan Shenzhen China Equipment Under Test (EUT) Product Name: BLUETOOTH CLOCK RADIO WITH USB CHARGING Model No.: SCR1997, CAB-1819, CAB-1869, CR1997, CR1997-PL, SCR1997-PL, CR1997-P, PSCR1997, PCR1997, SCR1997-P Trade Mark: SYLVANIA, PROSCAN, CURTIS FCC ID: OKUCAB1819 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2012 Date of sample receipt: April 07, 2013 Date of Test: April 08-16, 2013 Date of report issued: April 16, 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE13040039901 Global United Technology Services Co., Ltd. Project No.: GTSE130400399RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 33 2 Version Version No. Date Description 00 April 16, 2013 Original Prepared By: Date: April 16, 2013 Project Engineer Check By: Date: April 16, 2013 Reviewer Report No.: GTSE13040039901 Global United Technology Services Co., Ltd. Project No.: GTSE130400399RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 33 3 Contents Page 1 COVER PAGE............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 CLIENT INFORMATION......................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3 TEST MODE........................................................................................................................................ 7 5.4 DESCRIPTION OF SUPPORT UNITS....................................................................................................... 7 5.5 TEST FACILITY.................................................................................................................................... 7 5.6 TEST LOCATION................................................................................................................................. 7 5.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER......................................................................... 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA...................................................................................... 9 7.1 ANTENNA REQUIREMENT:.................................................................................................................... 9 7.2 CONDUCTED EMISSIONS................................................................................................................... 10 7.3 RADIATED EMISSION METHOD........................................................................................................... 15 7.3.1 Field Strength of The Fundamental Signal ................................................................................ 17 7.3.2 Spurious emissions.................................................................................................................... 18 7.3.3 Bandedge emissions.................................................................................................................. 22 7.4 20DB OCCUPY BANDWIDTH.............................................................................................................. 23 8 TEST SETUP PHOTO .......................................................................................................…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission