OKUCAB60652STEREO PORTABLE SPEAKER with Bluetooth Wireless Technology

PSSTEREOORTABLE PEAKER with Bluetooth Wireless Technology Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model: CMA3569 with Bluetooth Wireless Technology STEREO PORTABLEPEAKER S 1 The unit has a built in DC3.7V,400mAh Li-ion rechargeable battery, recharge it as follow: zInset the small plug from the supplied Connection cable to the Micro USB Jack on the rear of unit. zInsert the other plug to the USB Port on the Personal Computer or any USB Charger having DC 5V;300 below. During charging, the Red Indicator on the front panel will light. When finished, it will turn off. (Personal Computer and USB Charger not included.) Notes: Your battery will last longer if you follo A. For charging first time, charge it at least 10 hours. B. Recharge and store the battery within the temperature range of 5°C~35°C (40°F~95°F). C. Do not over charge (longer than 24 hours). Excessive charging or discharging may shorten the battery's life. D. Battery life naturally shortens slowly over time. E. The rechargeable battery incorporated in this product is not user replaceable. 2 To PC or USB Charger wingthesesimpleguidelinesforcharging andstoringit. MIC BatteryRecharge mA(ormorethan300mA)outputasthefigure Location of Controls: FRONT VIEW 4. 2.  3.  7. 3 10. POWER ON/OFF Switch MIC 1 2 3 4 5 6 AUX IN ON OFF DC IN DC 5V, 300 mA POWER 10 8 9 5. LEDIndicator 8. Microphone 7 1. (Volume Down) Button 6. +(VolumeUp)Button 9.MicroUSBPort (ForChargingonly) AUXINJack REARVIEW – Button Button Button 4 OPERATION In first time use or re-pairing tonew BT Device, pairing the unit to external BT Device as below: 1. Slide the Power ON/OFF Switch on the rear of unit to ON position. Blue Indicators on the front panel will light and blinking. nnection cable h the AUX IN Jack on the rear of unit. Otherwise, the unit will turn to 2. Power on the external BT Device and enter to searching mode. Start pairing as the on screen instructions on the external BT Device. After paired, the Blue Indicator will stop blinking. (For details pairing procedures, please refer to the user’s manual of your BT Device). Notes: z “CMA3569” will appear on the display of external BT Device. zPairing code “0000” may need to enter. Normal operation after pairing: 1. Turn on the BT function of the external BT Device. 2. Slide the Power ON/OFF Switch to ON position to power on the unit. The Blue Indicator on the front panel will light, wait until the Blue Indicators is stop blinking. (It needs take a few seconds). 3. Plays the music in the connected BT Device as usual. 4. During playback: zPress the + or – (Volume Up or Down) Buttons to adjust volume level as desire. zPress the (Play/Pause) Button to pause; press again to resume. zPress and release theorButton to skip tracks. 5. If the unit was paired to a Cell Phone: zWhen a call is incoming during listening, press the When finished, press the playback. zPress and hold theButton for last number redialing. the unit. WhentheexternalBT Device searchedtheunit,ourmodelnumber Buttontohook offthen speaktothebuilt-inmicrophoneonfrontpanelto answer the phone. Buttontohookon then resume tomusic 6.Whenfinishedlistening,slidethePowerON/OFFSwitchtoOFFpositionto shutoff an’ttoMakesurethecosAudio u Important: m to a t inserted i c a I I a y AUXINmodewillnotfunctioning. .BT AUX IN: 1. Slide the Power ON/OFF Switch to ON position to power on the unit. The Blue Indicator on front panel will light. 2. Connect one end of the supplied Audio Connection Cable to the Line Out; AUX Out or Phones Jack of the external audio player. 3. Insert other end of the supplied Audio Connection Cable to the AUX IN Jack on the rear of unit. The unit will turn to AUX IN mode automatically. – (Volume Up or Down) Buttons to adjust 6. When finished listening, slide the Power ON/OFF Switch to OFF position to shut off the unit. Troubleshooting: Can’t power onBuilt in battery consumed Recharge the battery. No sound or sound weak Volume of the unit was set to minimum position Increase the volume level by press the + Button. Volume of paired/connected device is in low volume level Rise the volume level of the paired BT device or connected audio player 5 TolisteningfromtheexternalaudioplayersuchlikeMP3Player,Disc-man...etc. 4.Playsthemusicintheconnectedaudioplayerasusual.(Makesurethevolumelevel of 5. During playback, press the + or volume levelasdesire. the connected audio player is turned to high level. (Otherwise, sound is weak.) Specification Power SourceBuilt-in DC3.7V,400mAh Li-ion rechargeable battery. Recharge by DC Maximum Play time Up to4 BT Effective range Up to 30 feet in open area Impedance of Speakers SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Accessories: 1 x User’s Manual 1 x USB Connection cable (For charge only) 1 x Audio Connection Cable with 3.5mm stereo mini plugs 6 3 W; 4 Ohm x 2 hours after fully charged and playback at 50% 5V;300mAthrough volume level MicroUSBPort Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 90 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $10.00 (to cover shipping and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please make sure that the cashier check or money order is redeemable through a U.S. bank. Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt of your unit. Please ship your unit to: Craig Electronics Inc. 1160 NW 163 Drive Miami, Fl 33169 This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone…

Text truncated - open the document above for the full version.

Example of Agents letter (for TCB – TCB approval): Shenzhen Junlan Electronic Ltd Date (dd/mm/yyyy)16/12/2013 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, We, Shenzhen Junlan Electronic Ltd (address: District 2 type A plant in the second layer 1-4, NO.2 Industrial Fuyuan Tangwei Fuyong Baoan Shenzhen China), hereby authorize Hans.hu (Company name: Global United Technology Services Co., Ltd. Address: 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong )to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 16/12/2014 Sincerely, Company Officer: safety engineer / Peng Xiao Telephone Number: 0755-27309169 Email: [email protected]

Shenzhen Junlan Electronic Ltd Date (dd/mm/yyyy)16/12/2013 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: OKUCAB60652 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Shenzhen Junlan Electronic Ltdhereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: safety engineer / Peng Xiao Telephone Number: 0755-27309169 Email: [email protected]

Differences Declaration To whom concern, We Shenzhen Junlan Electronic Ltd hereby declares: The product model(s) CAB-60652 are identical in the same PCB layout, interior structure and electrical circuits with the model CMA3569 which tested in Global United Technology Services Co., Ltd., the only differences are the model name for commercial purpose. Authorized signature: Date: 2013-12-16

DEC 2013 CMA3569 FCC ID:OKUCAB60652 50 25 STEREO PORTABLE SPEAKER with Bluetooth Wireless Technology POWER SOURCE: Built-in Recharge Li-ion Battery; Recharge by DC 5V, 300mA Through Micro USB Port ® 贴纸 订单号：JLE13754 CRAIG CMA3569 版本/版次：A/0 胡本林 CAB-60652 AUX IN ON OFF DC IN DC 5V, 300mA POWER DEC 2013 贴纸位置图 贴纸位置图 订单号：JLE13754 CRAIG CMA3569 版本/版次：A/0 胡本林 CAB-60652

FCC ID:OKUCAB60652 The device has a standalone transmission. According to KDB 447498 section 4.3.1, the 1-g SAR test exclusion thresholds at test separation distances≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)] ≤ 3.0 The maximum tune-up limit power is 0.649mW @ 2.480GHz For the head and body SAR, use 5mm as the conservative minimum test separation distance, [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)] =0.204≤ 3.0 So standalone SAR measurements are not required for both head and body.

Global United Technology Services Co., Ltd. Report No.: GTSE13120193401 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” FCC REPORT Applicant: Shenzhen Junlan Electronic Ltd Address of Applicant: District 2 type A plant in the second layer 1-4, NO.2 Industrial Fuyuan Tangwei Fuyong Baoan Shenzhen China Equipment Under Test (EUT) Product Name: STEREO PORTABLE SPEAKER with Bluetooth Wireless Technology Model No.: CMA3569, CAB-60652 Trade Mark: CRAIG FCC ID: OKUCAB60652 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2012 Date of sample receipt: December 10, 2013 Date of Test: December 10-12, 2013 Date of report issued: December 13, 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE13120193401 Global United Technology Services Co., Ltd. Project No.: GTSE131201934RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 30 2 Version Version No. Date Description 00 December 13, 2013 Original Prepared By: Date: December 13, 2013 Project Engineer Check By: Date: December 13, 2013 Reviewer Report No.: GTSE13120193401 Global United Technology Services Co., Ltd. Project No.: GTSE131201934RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 30 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 CLIENT INFORMATION ......................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3 TEST MODE ........................................................................................................................................ 7 5.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.5 TEST FACILITY .................................................................................................................................... 7 5.6 TEST LOCATION ................................................................................................................................. 7 5.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 ANTENNA REQUIREMENT: .................................................................................................................... 9 7.2 CONDUCTED EMISSIONS ................................................................................................................... 10 7.3 RADIATED EMISSION METHOD ........................................................................................................... 13 7.3.1 Field Strength of The Fundamental Signal ................................................................................ 15 7.3.2 Spurious emissions .................................................................................................................... 16 7.3.3 Bandedge emissions.................................................................................................................. 20 7.4 20DB OCCUPY BANDWIDTH .............................................................................................................. 21 8 TEST SETUP PHOTO ............................................................................................................................ 23 9 EUT CONSTRUCTIONAL DET…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission