OKUSBBA552016inch Bluetooth Soundbar Speaker with Wireless Subwoofer and Dolby

Model: SBB-A5520 16" Bluetooth soundbar speaker with wireless subwoofer and Dolby Please read this instruction manual carefully and keep it for future reference W ARN ING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORDThis unit has a long cord that can be easily tripped on or pulled on, causing injury. Please make sure it is arranged so that it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped over accidentally. C AUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DANGEROUSVOLTAGE:Thelightingflashwitharrowheadsymbolwithin anequilateraltriangleisintendedtoalerttheusertothepresenceof uninsulated“dangerousvoltage”withintheproduct’senclosurethatmay ATTENTION:Theexclamationpointwithinanequilateraltriangleisintendedto alerttheusertothepresenceofimportantoperatingandmaintenance (servicing)instructionsintheliteratureaccompanyingtheappliance. 2 1.Readtheseinstructions A ll the safety and operating instructions should be read before the appliance is operated. 2.Keeptheseinstructions T he safety and operating instructions should be kept for future reference. 3.Heedallwarnings A ll warnings on the appliance and in the operating instructions should be adhered to. 4.Followallinstructions A ll operation and use instructions should be followed. 5.Donotusethisapparatusnearwater T he appliance should not be used near water; for example, near a bath tub, be of sufficient magnitude to constitute a risk of electric shock to persons. Before using the unit, be sure to read all operating instructions carefully, please note that these are general precautions. w ashbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 6.Cleanonlywithdrycloth T he appliance should be cleaned only as recommended by the manufacturer. 7.Donotblockanyventilationopenings.Installinaccordancewiththe manufacturer’s instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation, such as a 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments / accessories specified by the manufacturer. 12.Useonlywithacart,stand,tripod,bracket,ortable specifiedbythemanufacturer,orsoldwiththeapparatus. Whenacartisused,usecautionwhenmovingthe cart/apparatuscombinationtoavoidinjury fromtip-over. A n appliance and cart combination should be moved with care. Quick stop, combination to overturn. 13.Unplugthisapparatusduringlightningstormsorwhenunusedfor l ong periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or 3 bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. excessive force and uneven surfaces may cause the appliance and cart 9. Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two prongs and a third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. Portable Cart Warning m oisture, does not operate normally, or has been dropped. 15. Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions. 16. Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18. Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product. 4 19. 2 0. Service Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. 21. Replacement parts Upon completion of any service or repairs to this…

Text truncated - open the document above for the full version.

SHENZHEN JUNLAN ELECTRONIC LTD No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Product Similarity Declaration Date: December 06, 2019 FCC ID: OKUSBBA5520 Model Number: SBB-A5520; Atune analog 09, SBB-XXXXX, (where X can be 0-9 or A-Z) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, SHENZHEN JUNLAN ELECTRONIC LTD hereby declare that our product (Bluetooth Tower Stereo) Model Number: SBB-A5520; Atune analog 09, SBB-XXXXX, (where X can be 0-9 or A-Z) board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: / safety engineer Company: SHENZHEN JUNLAN ELECTRONIC LTD Address: No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Tel: 0755-27309169 Fax: 0755-27309497 E-Mail: [email protected] Peng Xiao

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Address: No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Product Name: 16inch Bluetooth Soundbar Speaker with Wireless Subwoofer and Dolby Model Number: SBB-A5520; Atune analog 09, SBB-XXXXX, (where X can be 0-9 or A-Z) FCC Identifier: OKUSBBA5520 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Date: January 13, 2020 Title: safety engineer Signature of applicant: Shenzhen Junlan Electronic Ltd Shenzhen Junlan Electronic Ltd Peng Xiao

C5266091_X10_Ed.1 1/1 Office of Engineering Technology Federal Communications Commission 7075 Flying Cloud Dr. Eden Prairie, MN 55344 USA Date: January 13, 2020 Subject: Request for Confidentiality FCC ID: OKUSBBA5520 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Title: safety engineer Shenzhen Junlan Electronic Ltd Peng Xiao

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 1. EXTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Fig. 3 Fig. 4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Fig. 5 Fig. 6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Fig. 7 Fig. 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Fig. 9 Fig. 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Fig. 11

50.0mm 35.0mm 铭牌贴纸 尺寸：50.0*35.0mm 材质：不干胶，黑底白字，过光胶 用量：1PC Model No.:SBB-A5520 FCC ID.:OKUSBBA5520M/D.:03-01-2020 Made in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference,and (2)this device must accept any interference received, including interference that may cause undesired operation. 9V 1.3A Power Source: 16inch Model No.:SBB-A5520 FCC ID.:OKUSBBA5520M/D.:03-01-2020 Made in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference,and (2)this device must accept any interference received, including interference that may cause undesired operation. 9V 1.3A Power Source: 16inch 50.0mm 20.0mm 低音炮铭牌贴纸 尺寸：50.0*20.0mm 材质：不干胶，黑底白字，过光胶 用量：1PC Model No.:SBB-A5520 M/D.:03-01-2020 Made in China 9V1.3A Power Source: Model No.:SBB-A5520 M/D.:03-01-2020 Made in China 9V1.3A Power Source: 16inch

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 1. INTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 Antenna 900MHz ANT SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Fig. 3 Fig. 4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Fig. 5

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Report No.: LCS191225068AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 36 FCC TEST REPORT FOR SHENZHEN JUNLAN ELECTRONIC LTD 16inch Bluetooth Soundbar Speaker with Wireless Subwoofer and Dolby Test Model: SBB-A5520 Additional M/N: Please Refer To Page 6 Prepared for : SHENZHEN JUNLAN ELECTRONIC LTD Address : No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : December 27, 2019 Number of tested samples : 1 Sample number : Prototype Date of Test : December 27, 2019 ~ December 29, 2019 Date of Report : January 03, 2020 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Report No.: LCS191225068AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 36 FCC TEST REPORT FCC CFR 47 PART 15 C (15.249) Report Reference No. ................. : LCS191225068AEB Date of Issue................................... : January 03, 2020 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : SHENZHEN JUNLAN ELECTRONIC LTD Address ........................................... : No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Test Specification Standard ......................................... : FCC CFR 47 PART 15 C(15.249) / ANSI C63.10: 2013 Test Report Form No. ..................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : 16inch Bluetooth Soundbar Speaker with Wireless Subwoofer and Dolby Trade Mark ..................................... : Test Model ...................................... : SBB-A5520 Ratings ............................................ : INPUT: 100-240V~, 50/60Hz, 0.5A MAX OUTPUT:9V1300mA Result ........................................... : Positive Compiled by: Supervised by: Approved by: Ray Yang/ Administrators Jin Wang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Report No.: LCS191225068AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 36 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS191225068AEB January 03, 2020 Date of issue Test Model.............................. : SBB-A5520 EUT......................................... : 16inch Bluetooth Soundbar Speaker with Wireless Subwoofer and Dolby Applicant............................... : SHENZHEN JUNLAN ELECTRONIC LTD Address.................................. : No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : SHENZHEN JUNLAN ELECTRONIC LTD Address................................... : No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Factory................................... : SHENZHEN JUNLAN ELECTRONIC LTD Address................................... : No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Report No.: LCS191225068AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 36 Revision History Revision Issue Date Revisions Revised By 000 January 03, 2020 Initial Issue Gavin Liang SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 Report No.: LCS191225068AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 36 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................. 6 1.1 Description of Device (EUT) ....................................................................................................... 6 1.2. Support Equipment List ...........................................................…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 _______________________________________________________________________________________________ 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OKUSBBA5520 _______________________________________________________________________________________________ 1.2. Photo of Conducted Emissions Measurement Fig. 3