OPPTRX2525YTRX2525Y 2.5-2.6 GHz Series Broadband Wireless Tx

TRI2525B 2.5 – 2.6 GHZ SERIES BROADBAND WIRELESS TRANSCEIVER INSTALLATION AND OPERATION GUIDE tri2525b_ml_03_sd Approved: G.V. ii Vecima Networks Inc. Document: tri2525b_ml_03_sd Approved: G.V. Proprietary to Vecima Networks Inc. All rights reserved. No part of this publication may by reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Vecima Networks Inc. Vecima Networks Inc. reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Vecima Networks Inc. to provide notification of such revision or change. Vecima Networks Inc. provides this guide without warranty of any kind, either implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Vecima Networks Inc. may make improvements or changes in the product(s) described in this manual at any time. Specifications subject to change without notice — Printed in Canada tri2525b_ml_03_sd Approved: G.V. iii Vecima Networks Inc. Thank you for purchasing this product from Vecima Networks! Vecima Networks is a leading technology design center and provides innovative solutions for the ongoing video, voice and data delivery revolution. Since 1988, our design powerhouse has created custom RF and digital products for technology leaders such as AT&T, Cisco Systems, Cogeco, Comcast and Cox Communications. All Vecima Networks products benefit from this ground-breaking expertise. Vecima Networks designs and manufactures: z 256 QAM Upconverters z Digital Video Modulators z Agile CATV Modulators z Frequency Translators z Spread Spectrum Devices z MMDS Transceivers z Off-air/CATV Demodulators z Wireless Cable MMDS z Wireless Cable LMDS z Edge Devices z Video On Demand Products and more! For additional product or corporate information, please contact Vecima Networks at: Vecima Networks Inc. 150 Cardinal Place Saskatoon, SK Canada S7L 6H7 Tel: (306) 955-7075 Fax: (306) 955-9919 Web: www.vecimanetworks.com Email: [email protected] tri2525b_ml_03_sd Approved: G.V. iv Vecima Networks Inc. SAFETY PRECAUTIONS 1. Before installing and operating this equipment, read all Safety, Installation and Operating sections. Retain this manual for future reference. 2. Follow all instructions — Failure to do so may result in damage to the unit or severe personal injury. 3. The user should not attempt servicing. There are no user serviceable parts inside. Refer all servicing to factory qualified personnel. 4. Shock Hazard — An electrical shock hazard exists when the chassis cover is removed as is required to set internal controls. Always disconnect power from the unit before removing the cover. 5. Cleaning — Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. LES PRÉCAUTIONS DE SÉCURITÉ 1. Avant d'installer ou d'opérer cet équipement, lisez, toutes les sections de sécurités, d'installations et d'opérations. Gardez ce manuel comme source de référence. 2. Suivez toutes instructions - si non, vous risquez d'endommager la machine ou de vous blesser sérieusement. 3. N'essayez, pas de réparer cet équipement vous même. Référez toutes revisions nécessaire au personnel qualifié de la manufacture. 4. Risque de choc - Il y a un risque de décharge électrique qui existe quand la couverture du châssis est enlevée, comme est nécessaire pour ajuster les contrôlcs internes. Il faut toujours couper l'électricité avant d'enlever le couvercle pour faire aucun ajustage. 5. Le nettoyage - n'utilisez pas de nettoyeurs aérosols ou liquides. Utilisez un tissu humide pour nettoyer. Attention Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage du foudre. tri2525b_ml_03_sd Approved: G.V. v Vecima Networks Inc. INDEX 1.0 GENERAL INFORMATION .......................................................................................................................... 7 1.1 Functional Overview ................................................................................................................................................... 7 1.2 Module Features .......................................................................................................................................................... 7 1.3 Specifications................................................................................................................................................................ 8 2.0 INSTALLATION ............................................................................................................................................. 9 2.1 Unpacking the Unit...................................................................................................................................................... 9 2.2 Mounting the Unit ....................................................................................................................................................... 9 2.3 Connection to the Power Inserter and Cable Modem ............................................................................................ 13 2.4 Waterproofing Connections...................................................................................................................................... 14 3.0 ALIGNING THE ANTENNA ....................................................................................................................... 16 3.1 Preparation for Tuning ............................................................................................................................................. 16 3.2 Signal Strength and Alignment ................................................................................................................................ 16 3.3 Resetting the Beeper...…

Text truncated - open the document above for the full version.

Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 46 of 53 FCC Part 27 Test Report EXHIBIT C - EUT PHOTOGRAPHS TR2525B - Top View TR2525B - Bottom View Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 47 of 53 FCC Part 27 Test Report TR2525B - Side View

Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 50 of 53 FCC Part 27 Test Report TRI2525B – Top View TRI2525B – Bottom View Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 51 of 53 FCC Part 27 Test Report TRI2525B – Side View

Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 1 of 1 FCC Part 27 Test Report EXHIBIT A - FCC ID LABEL INFORMATION FCC § 2.925 Identification of equipment (a) Each equipment covered in an application for equipment authorization shall bear a nameplate or label listing the following: (1) FCC Identifier consisting of the two elements in the exact order specified in §2.926. The FCC Identifier shall be preceded by the term FCC ID in capital letters on a single line, and shall be of a type size large enough to be legible without the aid of magnification. Example: FCC ID XXX123. XXX—Grantee Code 123—Equipment Product Code Suggested Content of FCC ID Label Proposed Label Location on EUT The label shall not be a stick-on, paper label. The label on these products shall be permanently affixed to the product and shall be readily visible to the purchaser at the time of purchase, as described in Section 2.925(d) of this chapter. "Permanently affixed" means that the label is etched, engraved, stamped, silk- screened, indelibly printed, or otherwise permanently marked on a permanently attached part of the equipment or on a nameplate of metal, plastic, or other material fastened to the equipment by welding, riveting, or a permanent adhesive. The label must be designed to last the expected lifetime of the equipment in the environment in which the equipment may be operated and must not be readily detachable. FCC ID: OPPTRX2525Y

Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 48 of 53 FCC Part 27 Test Report TR2525B – Cover off View TR2525B – PCB with shield on Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 49 of 53 FCC Part 27 Test Report TR2525B – PCB with shield off TR2525B – PCB back View

Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 51 of 53 FCC Part 27 Test Report TRI2525B – Cover off View TRI2525B – PCB with shield on Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 52 of 53 FCC Part 27 Test Report TRI2525B – PCB with shield off TRI2525B – PCB back view Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 53 of 53 FCC Part 27 Test Report Power Inserter – Top View Power Supply View END OF REPORT

Note: This test report is for the customer shown above and their specific product only. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government . FCC PART 27 TYPE APPROVAL MEASUREMENT AND TEST REPORT For Vecima Networks Inc. 150 Cardinal Place, Saskatoon, Saskatchewan Canada S7L 6H7 FCC ID: OPPTRX2525Y This Report Concerns: Original Report Product name: 2.5 GHz Subscriber Transceiver Test Engineer: Oscar Au Report Number: R0703133 Report Date: 2007-04-04 Reviewed By: Test Engineer: Daniel Deng Prepared By (00): Bay Area Compliance Laboratories Corp. (BACL) 1274 Anvilwood Ave. Sunnyvale, CA 94089, USA Tel: (408) 732-9162 Fax: (408) 732 9164 Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 2 of 42 FCC Part 27 Test Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................4 EUT PHOTO.................................................................................................................................................................4 MECHANICAL DESCRIPTION.........................................................................................................................................4 OBJECTIVE...................................................................................................................................................................4 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................5 TEST METHODOLOGY..................................................................................................................................................5 MEASUREMENT UNCERTAINTY....................................................................................................................................5 TEST FACILITY.............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 JUSTIFICATION.............................................................................................................................................................6 EUT EXERCISE SOFTWARE..........................................................................................................................................6 SPECIAL ACCESSORIES.................................................................................................................................................6 EQUIPMENT MODIFICATIONS.......................................................................................................................................6 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS........................................................................................................6 POWER SUPPLY INFORMATION.....................................................................................................................................6 EXTERNAL I/O CABLING LIST AND DETAILS................................................................................................................6 TEST SETUP BLOCK DIAGRAM.....................................................................................................................................7 SUMMARY OF TEST RESULTS ...............................................................................................................................8 §27.52, §1.1307(B) (1) & §2.1091 - RF SAFETY.........................................................................................................9 §2.1047 – MODULATION CHARACTERISTICS ..................................................................................................10 §2.1051 & §27.53(L) – SPURIOUS EMISSIONS AT ANTENNA TERMINALS .................................................11 STANDARD APPLICABLE............................................................................................................................................11 MEASUREMENT PROCEDURE......................................................................................................................................11 EQUIPMENT LISTS......................................................................................................................................................11 MEASUREMENT RESULT............................................................................................................................................11 § 2.1053 & §27.53 (L) – FIELD STRENGTH OF SPURIOUS RADIATION........................................................24 STANDARD APPLICABLE............................................................................................................................................24 MEASUREMENT PROCEDURE......................................................................................................................................24 EQUIPMENT LISTS......................................................................................................................................................24 MEASUREMENT RESULT............................................................................................................................................24 TEST RESULTS SUMMARY..........................................................................................................................................25 §2.1049, §27…

Text truncated - open the document above for the full version.

Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 44 of 53 FCC Part 27 Test Report EXHIBIT B - TEST SETUP PHOTOGRAPHS Model: TRI2525B Radiated Emissions – Front View Radiated Emissions – Rear View Vecima Networks Inc. FCC ID: OPPTRX2525Y Report #: R0703133 Page 45 of 53 FCC Part 27 Test Report Model: TRI2525B Transmitter Radiated Emission – Front View Transmitter Radiated Emission – Rear View