OQKSAT600Mobile Phone for Satellite Reception

 (QJOLVK Telit Sat 600 Dual Mode Globalstar/GSM Telephone User’s Guide SAT600 User's Guide 1110... pagina 1 Mercoledì 11 Ottobre 2000 17.07  SAT600 User's Guide 1110... pagina 2 Mercoledì 11 Ottobre 2000 17.07  Introduction Thank you for having chosen Telit. Please read this manual carefully in order to be in a position to make full use of your telephone’s capabilities. Using your dual mode Satellite/GSM Telit Sat 600 Telephone, calls may be made and re- ceived using both the GSM 900 MHz cellular networks (on condition that an agreement exists between your network operator and the network on which you are about to oper- ate) and using the Globalstar ® satellite network. Despite your Sat 600’s advanced technology, it is extremely simple to use. It offers the functions typical of a GSM telephone but in addition, using a very simple menu, it allows you to make use of the enormous potential offered by Globalstar* network’s satellite cov- erage. On reading the first few pages of this manual, you will already be able to make and re- ceive calls, memorise and recall telephone numbers in your telephone directory, and send and receive short messages containing text (SMS). * Find out about the coverage offered by the Globalstar network by speaking to your operator or service provider. The Sat 600 telephone may be used in all European Union Countries. You may not be able to use it in other countries or regions due to local tele- communication regulations. EC Conformity Mark This telephone complies with European Community Standards ETS 300342 and ETS 300831; EN 60950 in terms of the provisions of European Directives: 99/5/EC 89/336/EEC 73/23/EEC and USA standards: FCC part 2 FCC part 15 FCC part 25 In the quest for continuous improvements in specification, design and other areas, the contents of this manual are subject to change without notice. © 2000 Telit Mobile Terminals S.p.A. All rights reserved. SAT600 User's Guide 1110... pagina 3 Mercoledì 11 Ottobre 2000 17.07  Patent Information This unit has been produced in terms of the following licences held by QUALCOMM Inc. (other licences in progress): 4,901,307 5,487,175 5,603,096 5,056,109 5,490,165 5,604,730 5,099,204 5,497,395 5,617,060 5,101,501 5,499,280 5,621,784 5,103,459 5,504,773 5,621,853 5,107,225 5,506,865 5,625,876 5,109,390 5,509,015 5,627,857 5,228,054 5,511,067 5,629,955 5,257,283 5,511,073 5,629,975 5,265,119 5,528,593 5,633,881 5,267,261 5,544,196 5,638,412 5,267,262 5,546,459 5,640,414 5,283,536 5,561,618 5,642,398 5,289,527 5,566,000 5,644,591 5,307,405 5,566,206 5,644,596 5,309,474 5,566,357 5,646,991 5,339,046 5,568,483 5,652,599 5,341,456 5,572,172 5,654,979 5,373,259 5,574,773 5,655,220 5,383,219 5,576,662 5,657,420 5,392,287 5,577,022 5,666,122 5,396,516 5,577,025 5,673,259 5,408,697 5,581,575 5,675,644 5,414,796 5,588,043 5,687,229 5,416,797 5,590,069 5,689,557 5,426,392 5,590,406 5,691,974 5,442,627 5,590,408 5,692,006 5,452,473 5,592,481 5,461,639 5,592,548 5,469,115 5,594,718 5,475,870 5,596,570 5,479,475 5,600,754 5,485,486 5,602,833 SAT600 User's Guide 1110... pagina 4 Mercoledì 11 Ottobre 2000 17.07  Index Index _____________________________________________________________ 5 1. Phone overview _________________________________________________ 10 Special keys ______________________________________________________ 11 Soft keys _________________________________________________________ 11 Indicators ________________________________________________________ 12 Telephone status indicator ___________________________________________ 12 Indicators on the display _____________________________________________ 13 Satellite Antenna ___________________________________________________ 17 Position of antenna during use ________________________________________ 17 Installation of the SIM card ___________________________________________ 18 Installing and removing the battery _____________________________________ 19 Accessory connector ________________________________________________ 19 Recharging the battery ______________________________________________ 20 Irregularity during recharging _________________________________________ 21 Battery low charge indicator __________________________________________ 21 2. Quick guide for first use _________________________________________ 22 Making your first call ________________________________________________ 22 Receiving your first call ______________________________________________ 23 Emergency calls ___________________________________________________ 24 Storing a number in the phone book ____________________________________ 24 Recalling a name in the phone book ____________________________________ 24 Sending your first short text message (SMS) _____________________________ 25 Reading your first short text message (SMS) _____________________________ 26 3. Important warnings ______________________________________________ 28 4. Main Functions _________________________________________________ 31 Switching on ______________________________________________________ 31 Switching off ______________________________________________________ 31 Access codes _____________________________________________________ 31 Security code (6 digits) ______________________________________________ 31 PIN and PIN 2 Codes (from 4 to 8 digits) ________________________________ 32 SAT600 User's Guide 1110... pagina 5 Mercoledì 11 Ottobre 2000 17.07  Deactivating and activating the PIN code _______________________________ 32 PUK and PUK 2 codes (8 digits) _______________________________________ 32 Password to bar calls ________________________________________________ 32 Making a call _____________________________________________________ 33 International calls __________________________________________________ 33 Automatic redialling _________________________________________________ 33 Correcting entering errors ___________________________________________ 33 Recalling a number in the phone book _____________________________…

Text truncated - open the document above for the full version.

34010 SGONICO (TRIESTE) – Viale Stazione di Prosecco, 5/b – tel. 040 / 41.92.111 – fax 040 / 25.11.11 MOBILE TERMINALS S.p.A. Sgonico, 11 th September 2000 Declarations for SAT600 Myself Paolo Giachin declares on behalf of Telit Mobile terminals S.P.A. the following: 1) CFR Part 25.136 (a) As stated in the User Manual paragraph 3. IMPORTANT WARNINGS the device should not be used on aircraft. 2) CFR Part 25.136 (b) The operation of the device is in accordance with system operator protocol. 3) CFR Part 25.202 (a)(4) The operating frequency range(s) of the DEVICE: Transmit band 1610 MHz to 1626.5MHz Receive band 2483.5MHz to 2500MHz 4) CFR Part 25.213 (a)(1) That it is the Networks responsibility for not transmitting in prohibited Radio Astronomy areas and on Radio Astronomy frequencies. Sincerely, Paolo Giachin Product Development Manager Telephone Number +39 / 040 / 4192244 Fax Number +39 / 040 / 251257

FCC Laboratory Equipment Authorization Branch Examiners 7435 Oakland Mills Rd Columbia, MD 21036 Gentlemen: Submitted herewith is an application for a Part 25 mobile handset transmitting on a frequency in the band 1610 to 1626.5 MHz. The receiver system operates on a frequency of 2483.5 to 2500 MHz receiving signals for a series of LEO satellites. The SAR test submitted with the unit is based on the old supplement C procedure. The data taken at that time shows the SAR levels to be extremely low, primarily due to the antenna configuration relative to the user. These units incorporate a relative large antenna that is oriented in a manner during normal operation that is away from head. Thus, the separation distance is very large compared to typical cell phones. If any additional information is needed, please let me know. Regards, Phil Inglis TRP/Cetecom bvba

34010 SGONICO (TRIESTE) – Viale Stazione di Prosecco, 5/b – tel. 040 / 41.92.111 – fax 040 / 25.11.11 MOBILE TERMINALS S.p.A. Sgonico, September 25, 2000Chief, Equipment Approval Services Federal Communications Commission P.O. Box 358315 Pittsburgh, PA 15251-5315 Agent Authorization Letter Dear Sir or Madam: We, Telit Mobile Terminals S.P.A., hereby authorize CETECOM ICT Services GmbH, Untertürkheimer Strasse 6 – 10, D-66117 Saarbrücken tel. +49/681/598-0 Germany to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on September 24, 2001. Sincerely, Paolo Giachin Product Development Manager Telephone Number +39 / 040 / 4192244 Fax Number +39 / 040 / 251257

Rev. 0Telit S.p.A. TECHNICAL MANUAL GS/GSM SAT600 DUAL MODE USER TERMINAL Page 1 of 8 Telit GS/GSM SAT600 Dual Mode User Terminal Final assembly front view Rev. 0Telit S.p.A. TECHNICAL MANUAL GS/GSM SAT600 DUAL MODE USER TERMINAL Page 2 of 8 Telit GS/GSM SAT600 Dual Mode User Terminal Final assembly rear view Rev. 0Telit S.p.A. TECHNICAL MANUAL GS/GSM SAT600 DUAL MODE USER TERMINAL Page 3 of 8 Telital GS/GSM SAT550 Dual Mode User Terminal Final assembly lateral view

Rev. 0Telit S.p.A. TECHNICAL MANUAL GS/GSM SAT600 DUAL MODE USER TERMINAL Page 4 of 8 GS & GSM BB assy CS782c Rev. 0Telit S.p.A. TECHNICAL MANUAL GS/GSM SAT600 DUAL MODE USER TERMINAL Page 5 of 8 GS & GSM Radio assy CS783c Rev. 0Telit S.p.A. TECHNICAL MANUAL GS/GSM SAT600 DUAL MODE USER TERMINAL Page 6 of 8 SIMCARD board assy CS838 Rev. 0Telit S.p.A. TECHNICAL MANUAL GS/GSM SAT600 DUAL MODE USER TERMINAL Page 7 of 8 Jack board for headphones CS857 Rev. 0Telit S.p.A. TECHNICAL MANUAL GS/GSM SAT600 DUAL MODE USER TERMINAL Page 8 of 8 PCBs final assembly

Rev. 2Telit S.p.A. TECHNICAL MANUAL GS/GSM SAT600 DUAL MODE USER TERMINAL Page 1 of 1 7PARTS LIST Bill of materials GSM Radio & display assy cs782ccode: 2000100378 Bill of materials GS & GSM Radio board CS783ccode: 2000100370 Bill of materials SIMCARD Module CS838code: 2000100335 Bill of materials Jack board for Headphones CS857code: 2000100371 TELIT MOBILE TERMINALS SpA ESPLOSIONE CON RIFERIMENTI SCHEMA (da ATBTEL30) PAG. 1 Data creazione distinta 03/05/00 Data di stampa 19/05/00 Data ultima modifica 03/05/00 Data di validita’ 19/05/00 Revisione Validita‘ Liv. Cv Codice Telital Descrizione C.Costrut./Nr.Disegno Um Quantita‘ Riferimento schema PdM ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Assieme 01 2000100378 BASETTA BB GS & BB GSM CS782C VERS 29.12.99 Nr. progetto: 0128 1 01 2000400378 BASETTA BB GS & BB GSM CS782C VERS 29.12.99 LATO PTH PZ 1,00000 rif. dis. 1 .2 01 2000200378 BASETTA BB GS & BB GSM CS782C VERS 29.12.99 LATO PRIM SMD PZ 1,00000 rif. dis. 1 ..3 01 2000300378 BASETTA BB GS & BB GSM CS782C VERS 29.12.99 LATO SEC SMD PZ 1,00000 rif. dis. 1 ...4 01 1ff0100782C BASETTA C/S BB GS & BB GSM VERS 29.12.99 PZ 1,00000 rif. dis. 1 ...4 01 1vv0200268fpe ETICHETTA ACRILATO BIANCO H6 L20 3 PISTE TT.26.0002 PZ 1,00000 rif. dis. 2 ...4 01 1aa0100106ky RES SMD 0 OHM JUMPER1/16W 0603 CJ10–000–D PZ 1,00000 R8 ...4 01 1aa0100108ky RES SMD 10 R 5% 1/16W 0603 CR10–100J–D PZ 1,00000 R14 ...4 01 1aa0100123ky RES SMD 1 K 5% 1/16W 0603 CR10–102J–D PZ 1,00000 R74 ...4 01 1aa0100248ky RES SMD 100.0 K 1% 1/16W 0603 CR10–1003F–T PZ 1,00000 R25 ...4 01 1aa0100264ky RES SMD 270 R 5% 1/16W 0603 CR10–271J–T PZ 2,00000 R66 R75 ...4 01 1aa0100366ky RES SMD 56 R 5% 1/16W 0402 CR05–560J–H PZ 2,00000 R86 R96 ...4 01 1aa0100368ky RES SMD 120 R 5% 1/16W 0402 CR05–121J–H PZ 4,00000 R76 R77 R78 R79 ...4 01 1aa0100374ky RES SMD 1 K 5% 1/16W 0402 CR05–102J–H PZ 1,00000 R101 ...4 01 1aa0100380ky RES SMD 10 K 5% 1/16W 0402 CR05–103J–H PZ 4,00000 R1 R104 R124 R125 ...4 01 1aa0100382ky RES SMD 15 K 5% 1/16W 0402 CR05–153J–H PZ 1,00000 R65 ...4 01 1aa0100384ky RES SMD 22 K 5% 1/16W 0402 CR05–223J–H PZ 3,00000 R9 R89 R90 ...4 01 1aa0100385ky RES SMD 27 K 5% 1/16W 0402 CR05–273J–H PZ 5,00000 R33 R72 R73 R100 R157 ...4 01 1aa0100386ky RES SMD 33 K 5% 1/16W 0402 CR05–333J–H PZ 1,00000 R3 ...4 01 1aa0100388ky RES SMD 47 K 5% 1/16W 0402 CR05–473J–H PZ 3,00000 R62 R99 R132 ...4 01 1aa0100390ky RES SMD 100 K 5% 1/16W 0402 CR05–104J–H PZ 7,00000 R16 R45 R103 R105 R128 R134 R136 ...4 01 1aa0100394ky RES SMD 470 K 5% 1/16W 0402 CR05–474J–H PZ 1,00000 R140 ...4 01 1aa0100395ky RES SMD 560 K 5% 1/16W 0402 CR05–564J–H PZ 1,00000 R139 ...4 01 1aa0100398ky RES SMD 100 R 5% 1/16W 0402 CR05–101J–H PZ 15,00000 R2 R20 R30 R32 R46 R49 R102 R112 R113 R115 R116 R117 R118 R119 R120 ...4 01 1aa0100443ky RES SMD 174.0 K 1% 1/16W 0603 CR10–1743F–T PZ 1,00000 R19 ...4 01 1aa0100452ky RES SMD 1.5 K 5% 1/16W 0402 CR05–152J–H PZ 2,00000 R31 R68 ...4 01 1aa0100480ky RES SMD 1.0 K 1% 1/16W 0603 CR10–102F–T PZ 1,00000 R92 *** SEGUE *** TELIT MOBILE TERMINALS SpA ESPLOSIONE CON RIFERIMENTI SCHEMA (da ATBTEL30) PAG. 2 Data creazione distinta 03/05/00 Data di stampa 19/05/00 Data ultima modifica 03/05/00 Data di validita’ 19/05/00 Revisione Validita‘ Liv. Cv Codice Telital Descrizione C.Costrut./Nr.Disegno Um Quantita‘ Riferimento schema PdM ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Assieme 01 2000100378 BASETTA BB GS & BB GSM CS782C VERS 29.12.99 Nr. progetto: 0128 ...4 01 1aa0100482ky RES SMD 10.0 K 1% 1/16W 0603 CR10–103F–T PZ 1,00000 R91 ...4 01 1aa0100494ky RES SMD 330 R 5% 1/16W 0402 CR05–331J–H PZ 4,00000 R47 R84 R87 R88 ...4 01 1aa0100627ky RES SMD 3.9 M 5% 1/16W 0603 CR10–395J–T PZ 1,00000 R83 ...4 01 1aa0800006av VARISTORE SMD 3.6 VDC VC060303A100T PZ 3,00000 VC1 VC2 VC3 ...4 01 1bb0100166ky COND CER SMD 100 nF X7R 0805 10% 25V CM21X7R104K25AT PZ 1,00000 C60 ...4 01 1bb0100187ky COND CER SMD 1.0pF COG 0402 +–0.25pF 50V CM05CG1R0C50AH PZ 2,00000 C163 C177 ...4 01 1bb0100192ky COND CER SMD 22 pF COG 0402 5% 50V CM05CG220J50AH PZ 3,00000 C119 C142 C144 ...4 01 1bb0100194ky COND CER SMD 33 pF COG 0402 5% 50V CM05CG330J50AH PZ 14,00000 C128 C129 C130 C162 C167 C168 C169 C170 C172 C173 C175 C176 C179 C181 ...4 01 1bb0100199ky COND CER SMD 100 pF COG 0402 5% 50V CM05CG101J50AH PZ 4,00000 C157 C158 C159 C160 ...4 01 1bb0100205ky COND CER SMD 220 nF X7R 0805 10% 25V CM21X7R224K25AT PZ 1,00000 C2 ...4 01 1bb0100206ky COND CER SMD 330 nF X7R 0805 10% 16V CM21X7R334K16AT PZ 7,00000 C65 C66 C89 C100 C102 C103 C105 ...4 01 1bb0100208ky COND CER SMD 100 nF X7R 0603 10% 16V CM105X7R104K16AT PZ 3,00000 C26 C34 C98 ...4 01 1bb0100211ky COND CER SMD 4.7nF X7R 0402 10% 16V CM05X7R472K16AH PZ 1,00000 C164 ...4 01 1bb0100228ky COND CER SMD 100 nF Y5V 0402 –20+80% 16V CM05Y5V104Z16VAH PZ 4,00000 C114 C147 C150 C166 ...4 01 1bb0100229ky COND CER SMD 22 nF X7R 0402 10% 16V CM05X7R223K16H PZ 1,00000 C10 ...4 01 1bb0200025av COND POLIEST 10 nF 10% SMD 100V 1210 CF022E0103KBA PZ 1,00000 C135 ...4 01 1bb0500011ky COND TANT SMD 2.2 uF 10V 20% Asize TAJA225M010S PZ 3,00000 C61 C62 C64 ...4 01 1bb0500025ky COND TANT SMD 2.2 uF 16V 20% Bsize TAJB225M016R PZ 2,00000 C69 C612 ...4 01 1bb0500050ky COND TANT SMD 4.7 uF 10V 20% Asize TAJA475M010R PZ 1,00000 C45 ...4 01 1bb0500051ky COND TANT SMD 10 uF 10V 20% Asize TAJA106M010R PZ 5,00000 C14 C29 C37 C41 C99 ...4 01 1bb0500053ky COND TANT SMD 22 uF 6.3V 20% Bsize TAJB226M006R PZ 2,00000 C68 C607 ...4 01 1bb0500054ky COND TANT SMD 47 uF 10V 20% Csize TAJC476M010R PZ 1,00000 C171 ...4 01 1bb0500060ky COND TANT SMD 1.0 uF 16V 20% Asize TAJA105M016R PZ 2,00000 C118 C153 ...4 01 1bb0500078ky COND TANT SMD 3.3 uF 10V 20% Asize TAJA335M010R PZ 2,00000 …

Text truncated - open the document above for the full version.

TTI-P-G 158 DASY Test-Report, Cetecom_ 6575_105 Page 1 of 13 Report Dosimetric Assessment of the Mobile Telephone Telit GS/GSM SAT600 According to the American FCC Requirements July 27, 2000 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort customer CETECOM Untertürkheimer Str. 6-10 D-66117-Saarbrücken The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_us_2.1.doc/26.01.2000/AB DASY Test-Report, Cetecom_ 6575_105 Page 2 of 13 dasy_report_us_2.1.doc/26.01.2000/AB Executive Summary The device GS/GSM SAT600 (IMEI: 004400/44/055055/4 ) is a new mobile phone from Telit operating in the 900 MHz and 1618 MHz / 2492 MHz frequency range. The system concepts supported are the GSM 900 and the Globalstar standards. The device is investigated in Globalstar mode only. For the Globalstar mode the device has a helix antenna which has to be turned into the correct position. The objective of the measurements done by IMST was the dosimetric assessment of one device in the Globalstar mode. The examinations have been carried out with the dosimetric assessment system „DASY“. The measurements were made according to the Federal Communications Commission (FCC) Guidelines [FCC 1997] for evaluating compliance of mobile phones with the American Standard ANSI C95.1 [ANSI 1992]. In [ANSI 1992] limits are defined to prevent harmful effects in human beings exposed to electromagnetic fields. The Telit GS/GSM SAT600 mobile phone operating in the Globalstar mode is in compliance with the American Standard ANSI C95.1 [ANSI 1992]. prepared by: ........................................... reviewed by: .............................................. Dipl.-Ing. Christoph Hennes Dr.-Ing. Frank Gustrau test engineer quality assurance engineer IMST GmbH Carl-Friedrich-Gauß-Straße 2 D-47475 Kamp-Lintfort Tel. +49- 2842-981 372 Fax +49- 2842-981 398 email: [email protected] DASY Test-Report, Cetecom_ 6575_105 Page 3 of 13 dasy_report_us_2.1.doc/26.01.2000/AB Table of Contents 1 SUBJECT OF INVESTIGATION.............................................................................................................. 4 2 THE AMERICAN STANDARD ANSI C95.1............................................................................................ 4 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES..................... 4 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS.............................................. 5 2.3 SAR LIMIT............................................................................................................................................ 5 3 THE AMERICAN MEASUREMENT PROCEDURE............................................................................... 6 3.1 TEST CONDITIONS.................................................................................................................................. 6 3.2 TEST POSITION...................................................................................................................................... 6 4 THE MEASUREMENT SYSTEM............................................................................................................. 6 4.1 TECHNICAL PARAMETERS OF THE MEASUREMENT SYSTEM......................................................................... 8 5 SAR RESULTS........................................................................................................................................... 9 6 EVALUATION ........................................................................................................................................... 9 7 APPENDIX............................................................................................................................................... 11 7.1 ADMINISTRATIVE DATA......................................................................................................................... 11 7.2 DEVICE UNDER TEST AND TEST CONDITIONS.......................................................................................... 11 7.3 DASY OPTIONS................................................................................................................................... 11 7.4 TEST POSITION.................................................................................................................................... 11 7.5 MATERIAL MEASUREMENT SYSTEM........................................................................................................ 12 7.6 ENVIRONMENT.................................................................................................................................... 13 8 REFERENCES ......................................................................................................................................... 13 DASY Test-Report, Cetecom_ 6575_105 Page 4 of 13 dasy_report_us_2.1.doc/26.01.2000/AB 1 Subject of Investigation The device GS/GSM SAT600 shown in Fig. 1 is a mobile phone from Telit operating in the 900 MHz and 1618 MHz / 2492 MHz frequency range. The system concepts supported are the GSM 900 and the Globalstar standards. The device is investigated in Globalstar mode only. For the Globalstar mode the device has a helix antenna which has to be turned in the correct position shown in Fig. 1 (left image shows left hand use, right image shows right hand use). Fig. 1: Pictures of the device under test. The objective of the measurements done by IMST was the dosimetric assessment of one device in the Globalstar mode. The examinations have been carried out with the dosimetric assessment system „DASY“ described below. 2 The American Standard ANSI C95.1 In the USA the recent Standard ANSI C95.1 was published in April 1992 [ANSI 1992]. It sets limits for human exposure to radiofrequency fields in the frequency range 3 kHz to 300 GHz. 2.1 Distinction Between Exposed Population, …

Text truncated - open the document above for the full version.

TTI-P-G 158 Appendix to DASY Test-Report: Cetecom_6575_105 Page 1 of 6 Appendix for the Report Dosimetric Assessment of the Mobile Telephone Telit GS/GSM SAT600 According to the FCC Requirements April 29, 2002 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Telit Mobile Terminals S.p.A. The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_supplement_c _2.0.doc/25.09.2001/CH Appendix to DASY Test-Report: Cetecom_6575_105 Page 2 of 6 dasy_report_fcc_supplement_c _2.0.doc/25.09.2001/CH Table of Contents 1 SAR DISTRIBUTION PLOT........................................................................................................................... 3 2 PROBE CALIBRATION DATA...................................................................................................................... 4 Appendix to DASY Test-Report: Cetecom_6575_105 Page 3 of 6 dasy_report_fcc_supplement_c _2.0.doc/25.09.2001/CH 1 SAR Distribution Plot. Since all measurements have similar distributions, only the plot with the highest SAR is shown below. Due to the length of the antenna and the position of the loudspeaker the maximum field strength is outside the measurement range. Fig. 1: SAR distribution plot, Telit GS/GSM SAT 600, high channel, right head side. Appendix to DASY Test-Report: Cetecom_6575_105 Page 4 of 6 dasy_report_fcc_supplement_c _2.0.doc/25.09.2001/CH 2 Probe Calibration Data Appendix to DASY Test-Report: Cetecom_6575_105 Page 5 of 6 dasy_report_fcc_supplement_c _2.0.doc/25.09.2001/CH Appendix to DASY Test-Report: Cetecom_6575_105 Page 6 of 6 dasy_report_fcc_supplement_c _2.0.doc/25.09.2001/CH

CETECOM ICT Services GmbH PO Box 10 04 45 . D-66004 Saarbrücken Telephone: +49 (0)681 598-9100 Telefax: -9075 Laboratory for Radio/Satellite Communications: Untertürkheimer Straße 6-10 . D-66117 Saarbrücken Telephone: +49 (0)681 598-8435 Telefax: -9075 Laboratory ́RSC ́ This test report consists of 60 pages page 1 (60) Test report no.: 2-1987-01-03/00 SAT600 Accredited testing laboratory DAR-Registration number: TTI-P-166/98 CETECOM ICT Services GmbH Test report no.: 2-1987-01-03/00 date: 10.08.2000 page 2 (60) Table of contents 1 General Information............................................................................................................................................................................3 1.1 Notes.............................................................................................................................................................................................3 1.2 Test laboratory.............................................................................................................................................................................4 1.3 Applicant ́s details......................................................................................................................................................................4 1.4 Details of application.................................................................................................................................................................4 1.5 Test item.......................................................................................................................................................................................5 1.5.1 General description................................................................................................................................................................5 1.5.2 Operating conditions..............................................................................................................................................................6 1.6 Test standard(s)...........................................................................................................................................................................6 2 Technical test........................................................................................................................................................................................7 2.1 Summary of test results..............................................................................................................................................................7 2.2 Test environment........................................................................................................................................................................7 2.3 Measurement and test setup, measurement uncertainties....................................................................................................7 2.4 Test equipment utilized..............................................................................................................................................................7 2.5 Test results...................................................................................................................................................................................8 2.5.1 Test result overview...............................................................................................................................................................8 2.5.2 Test documentation................................................................................................................................................................9 Enclosure Annex 1: Measurement and test setups - schematic diagrams Annex 2: Measuring equipment used (statement of inventory) Annex 3: Measurement results Annex 4: Data of correction Annex 5: Photographs Annex 6: Technical description(s) of the test item CETECOM ICT Services GmbH Test report no.: 2-1987-01-03/00 date: 10.08.2000 page 3 (60) 1 General Information 1.1 Notes The test results of this test report relate exclusively to the test item specified in subclause 1.5. ́CETECOM ICT Services GmbH ́ does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of ́CETECOM ICT Services GmbH ́. Tester: Date Name Signature 10.08.2000 Andrea Kirsch .............................................................. 10.08.2000 Karsten Geraldy .............................................................. Technical responsibility for area of testing: Date Name Signature 10.08.2000 Karsten Geraldy .............................................................. CETECOM ICT Services GmbH Test report no.: 2-1987-01-03/00 date: 10.08.2000 page 4 (60) 1.2 Test laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 - 10, D-66117 Saarbrücken P.O. Box 10 04 45 D-66004 Saarbrücken Germany Telephone: + 49 681 5 98 - 91 00 Fax: + 49 681 5 98 - 90 75 Accredited testing laboratoy DAR-Registration number: TTI-P-G 166/98 Test location, where different from ́CETECOM ICT Services GmbH ́: Name : - not applicable - Street : - not applicable - Town : - not applicable - Country : - not applicable - Telephone and Telefax : - not applicable - 1.3 Applicant ́s details Name : Telit Mobile Terminals S.p.A Department : R&D Measurement Group Street : Viale Stazione di Prosecco 5/b P.O. Box : Town : 34010 Sgonico - Trieste Country : Italy Telephone and Telefax : +39 040 4192244 / +39 040 251257 Contact person’s name : Mr. Tomaz Petaros Telephone and Telefax : +39 040 4192244 / +39 040 251257 1.4 Details of application Date of receipt of order : …

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Test report no.: 2-1987/00_1_2 FCCdate: 28.09.2000Page 14 (15) 5 Photo documentation photo 1: product overview photo 2: EMI-field test set-up