OR7GP1010Wireless Gamepad for Computer

User’s Manual of GlobLink GP1010 Wireless Gamepad for Computer Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. Regulatory information / Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or o\attachment of connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

LABEL Format: This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Model No. : GP1010 FCC ID : OR7GP1010 LABEL Size: 30 x 20 mm LABEL Position:

123456 A B C D 654321 D C B A Title NumberRevisionSize B Date:6-May-2002 Sheet of File:C:\PROGRAM FILES\DESIGN EXPLORER 99 SE\EXAMPLES\Game pad.DDBDrawn By: TCC 1 /RESET 28 VDD 2 OSCI 27 NC 3 OSCO 26 VSS 4 P7.7 25 /INT 5 P7.6 24 P5.0 6 P7.5 23 P5.1 7 P7.4 22 P5.2 8 P7.3 21 P5.3 9 P7.2 20 P6.0 10 P7.1 19 P6.1 11 P7.0 18 P6.2 12 P6.7 17 P6.3 13 P6.6 16 P6.4 14 P6.5 15 U1 EM78P447AM S8 UP S10 DOWN S9 LEFT S11 RIGHT A0 1 VCC 8 A1 2 WP 7 A2 3 SCL 6 VSS 4 SDA 5 U2 24C02 1 2 3 4 5 6 7 RF CON Q1 KST3906 R1 10K C1 104 X1 4MC4 104 S6 KEY B S5 KEY C S4 KEY D S3 KEY L S2 KEY R S7 KEY A S1 CH KEY C8 1U VCC C11(DNF) 102 ANT S12 KEY I S13 KEY J S14 KEY K S15 KEY L VCC 4.5V C12 47U R5 1M(1%) R6 100K(1%) R7 56K R4 1M Q3 KST3904 Q2 KST3904 R3 10K R10 470k D1 LED C2 1uF VCC L43 72T C6 104 Q40 KST3904 R41 24K ANT R42 10R L40 0.47uH RFV C4082P R40 0R R9 10K Q4 KST3906 R2 300R C5 104 C9 20P C10 22P L1 0.82uH C13 102P C15 22P L41 0R R22(DNF) RES1 C7(DNF) 10U E? ANTENNA L42 5.1uH RFV C18 0R C19 100P L3 0.82uH C17 82P L2 0.82uH C16 27P L4 0.47uH C20 100P R12 0.82uH R11 150P R13 82P 123456 A B C D 654321 D C B A Title NumberRevisionSize B Date:6-May-2002 Sheet of File:C:\PROGRAM FILES\DESIGN EXPLORER 99 SE\EXAMPLES\00A688E35-R03(CY3).DDBDrawn By: PIN 7 Data IN Q2 2N3904 L1 0.47uH X1 9MHz R4 36K R3 0R R6 360R R5 20K VCC C3 150P C4 100P C2 33P C1 104 PIN 1 VCC PIN 3 GND C6 0R VCC R12 56K L3 0.47uH VCC C5 104 Q3 2N3904 C14 10P TP1 ANT L4 0.47UH(DNF) C18 68P(DNF) C15 33P C20 39P C19 39P C22 12P C23 0R Q6 2N3904 R19 10K VCC R11 10K R18 68K(DNF) R1 0R C17 5P L5 R82(DNF) R2 0RC10(DNF) CAP C8 103P 123456 A B C D 654321 D C B A Title NumberRevisionSize B Date:6-May-2002 Sheet of File:C:\PROGRAM FILES\DESIGN EXPLORER 99 SE\EXAMPLES\000162~11.DDBDrawn By: C11 104PF C12 104PF 1 2 3 4 5 6 7 89 10 11 12 13 14 15 16 U1 MC3361C C9 1uF C5 103p C14 22P C13 22P VCC R7 33k 1 2 3 4 5 X3 455E R6 4.7K X1 MOUSE DATA L2 0.68uH C4 22P 25cm C8 12P C7 103P 2in1 receiver VCC X4 455c28 C6 1uF C18 104PF C17 104PF 1 2 3 4 5 6 7 89 10 11 12 13 14 15 16 U2 MC3361C C20 1uF R15 10K VCC VCC R13 330K TP1TP2 C23 103p C15 39P C16 22P VCC R17 33k 1 2 3 4 5 X5 480E R18 4.7K X2 KEY data C19 3P C21 103P VCC X6 480C28 C22 1uF one channel R23 10K 26.542 26.602 VCC 26.662 VCC 26.722 R21 330K 26.517 26.577 TP5 26.637 26.697 TP4 C24 22P R11 0R R14 (DNF) 0R R12 0R R22 (DNF) 0R C2 (DNF) CAP C1 (DNF) CAP PCB-162C-04 123456 A B C D 654321 D C B A Title NumberRevisionSize B Date:6-May-2002 Sheet of File:C:\PROGRAM FILES\DESIGN EXPLORER 99 SE\EXAMPLES\PCB-19~1.DDBDrawn By: P0.0 1 P0.4 24 P0.1 2 P0.5 23 P0.2 3 P0.6 22 P0.3 4 P0.7 21 P1.0 5 P1.1 20 P1.2 6 P1.3 19 P1.4 7 P1.5 18 P1.6 8 P1.7 17 VSS 9 D+ / SCLK 16 VPP 10 D- / SDATA 15 VREG 11 VCC 14 XIN / P2.1 12 XOUT 13 U1 CY7C63743 R4 10K R3 10K R14 10K R15 1K3 R9 300R R10 300R R11 300R R12 300R R13 300R R8 300R D1 SCR LOCK D2 CAP LOCK D3 NUM LOCK D4 M LOBAT D5 M STATUS D6 RESET GND 1 VCC 8 GND 2 GND 7 GND 3 CLK 6 GND 4 DATA 5 U2 24C08 C5 104P SW1 1 2 3 4 JP1 USB CON L2 L3 0.68uH(DIP) L5 10uH C3 104P C1 104P C4 47uF/16V C2 470uF/10V R2 10R VCC VCC VCC RF VccBB Vcc J2 ANTENNA D+ D- D+ D- C7 104P C8 47uF/16V C12 104P C9 0R C6 DNF L4 72T C10 DNF J1 ANTENNA RCA 1 2 3 4 5 6 7 8 9 RF CON

Test Report ------------------------------------------------------------------------------- 2/16 Report No.: G2815084 (Tx) Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Contents CHAPTER 1 INTRODUCTION........................................................................3 Description of EUT.........................................................................................3 Test method.....................................................................................................3 Configuration of test setup (Transmitter)........................................................4 Connections of Support Equipment................................................................5 Connections of EUT........................................................................................5 List of Support Equipment..............................................................................6 CHAPTER 2 RADIATED EMISSION TEST.......................................................8 Test Condition and Setup (Harmonic and Spurious Emission)......................8 List of test Instrument.....................................................................................9 Radiated Test Placement: (Photographs)......................................................10 Peak Power Measurement of Fundamental Frequency.................................11 APPENDIX A...........................................................................................12 Harmonic and Spurious Emission Test Result: (Horizontal)........................12 Harmonic and Spurious Emission Test Result: (Vertical)............................13 APPENDIX B............................................................................................14 Fundamental Emission Test Result:..............................................................14 APPENDIX C...........................................................................................15 Band Edge of Measurement: (Frequency Band: 26.96MHz ~ 27.28MHz)..15 Test Report ------------------------------------------------------------------------------- 3/16 Report No.: G2815084 (Tx) Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Chapter 1 Introduction Description of EUT EUT : Wireless Gamepad for Computer Model No. : GP1010 FCC ID : OR7GP1010 Frequency Range : 26.96 – 27.28 MHz Operating Frequency : 27.124MHz (1 channel w/ 12 bit security ID) Power Type : Powered by three AAA size batteries Test method All measurements contained in this report were performed according to the techniques described in Measurement procedure ANSI C63.4 – 1992. Pretest was carries out in order to find which that the emission of operating mode While testing, the EUT set in (27.124MHz) and continuously transmitting which transmitted the maximum emission. Before the measurement, pretest are carried out in all the orthogonal plane. The final measurement is carried in the plane which exhibit the worst case of emission The test placement as the photographs showed is the worst case emission placed. (If the emission is close to the ambient, the resolution BW and view resolution will be reduced and the data will be recorded by detection of maximum hold peak mode.) The testing configuration of test setup is showing in the next page. Test Report ------------------------------------------------------------------------------- 4/16 Report No.: G2815084 (Tx) Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Configuration of test setup (Transmitter) EUT (Tx) Test Report ------------------------------------------------------------------------------- 5/16 Report No.: G2815084 (Tx) Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Connections of Support Equipment PC: *Serial port --- an external modem *Printer port --- a printer *Monitor port --- a monitor *Keyboard port --- a keyboard *Mouse port --- a mouse *USB A port --- EUT *USB B port --- a USB gamepad (Each port on PC is connected with suitable device) Connections of EUT Power by Batteries: *Insert three AAA batteries into the battery. Test Report ------------------------------------------------------------------------------- 6/16 Report No.: G2815084 (Tx) Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 List of Support Equipment PC : HP Brio 85xx 6/350 Model No. : D6928A Serial No. : SG91801552 FCC ID : N/A (DoC Approved) : 3872H013 Power type : 100 ~ 230VAC / 50 ~ 60Hz, 5A, Switching Power cord : Non-shielded, 2.33m long, Plastic, No ferrite core Monitor : HP 15’ Color Monitor Model No. : D2827A Serial No. : KR91379759 FCC ID : C5F7NFCMC1518X : 3872B039 Power type : 110 ~ 240 VAC / 50 ~ 60 Hz, Switching Power cord : Shielded, 1.83m long, No ferrite core Data cable : Shielded, 1.46m long, with two ferrite cores Keyboard : HP Model No. : SK-2501K Serial No. : MR81008879 FCC ID : GYUR38SK : 3862A621 Power type : By PC Data cable : Shielded, 1.73m long, with ferrite core Mouse : HP Model No. : M-S34 Serial No. : LZB90910464 FCC ID : DZL211029 : 4862A011 Power type : By PC Power cord : Non-shielded, 1.88m long, No ferrite core Test Report ------------------------------------------------------------------------------- 7/16 Report No.: G2815084 (Tx) Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Modem : ACEEX Model No. : XDM41414 Serial No. : 964111217 FCC ID : IFAXDM1414 Power type : Linear Power cord : Non-shielded, 1.9m long, No ferrite cord Data cable : RS232, Shielded, 1.2m long, No ferrite core RJ11C x 2, 7’ long non-shielded, No ferrite core Printer : HP Model No. : C2184A Serial No. : SG55T1P1KY FCC ID : N/A, DoC Approved Power type : Linear Power cord : Non-shielded, 1.90m long, No ferrite core Data cable : Shielded, 1.8m long, No ferrite core USB Mouse : Logitech Model No. : M-BA47 Serial No. : LZE92250027 FCC ID : N/A, Doc Approved : 4872A220 Power type : Powered by PC Power Cable : Shielded, 1.5m long, Plastic hoods, No f…

Text truncated - open the document above for the full version.

Test Report ------------------------------------------------------------------------------ 10/16 Report No.: G2815084 (Tx) Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Radiated Test Placement: (Photographs)