ORV-LSSMShareMike

User Manual Classroom Audio System 1POWER2 TABLE OF CONTENTS SECTION 1: 4Important Safety Instructions Overview5System Components and Unpacking 6Optional Components 7Front Panel Indicators 7Top Panel Controls and Connections 8Side Panel Controls and Connections 8Rear Panel Features 9Flexmike Controls and Connections SECTION 2:10Step 1. Determine Set-up Location Set-up & Use10 1A. To Set-Up on Table Top 11 1B. To Set-Up Mounted on a Wall 13Step 2. Connecting the Power Supply 14Step 3. Audio Integration 15Step 4. Charging the Flexmike 16Step 5. Operating the Flexmike 17Step 6. Output to Assistive Listening Device (ALD) 18Step 7. Using the Flexmike as a Wireless Audio Link SECTION 3:19Daily Operation Instructions Daily Operation SECTION 4:20Battery Pack Replacement in a Flexmike Maintenance & Troubleshooting 21Troubleshooting Guide 22Tips to Obtain Optimal Audio Performance SECTION 5:23Warranty Statement Warranty & Specifications 24Safety Warnings and Certifications 28System Specifications IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use the apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding- type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/ accessories specified by the manufacturer. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. When the mains plug or appliance coupler is used as the disconnect device, it shall remain readily operable. 16. Please keep the unit in a good ventilation environment. 17. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 18. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 19. Warning - battery pack shall not be exposed to excessive heat such as sunshine, fire or the like. 12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 5 1. Overview 2. Set Up & Use / Daily Operation 3. Optional Accessories 4. Maintenance & Troubleshooting 5. Warranty, Safety & Specifications SECTION 1: OVERVIEW SYSTEM COMPONENTS AND UNPACKING The standard configuration of the Redcat Access will contain: Wall Charger & Charging Cable Flexmike Classroom Microphone 1 2 1POWER2 Redcat Access Receiver/ Amplifier and Power Supply PLEASE NOTE: The Redcat Access and Microphone(s) are registered together at the factory and are labeled as such. Please keep all components together as a system. Moving them from one system, or room, to another will result in the need to re-register them to function. 6 1. Overview 2. Set Up & Use / Daily Operation 3. Optional Accessories 4. Maintenance & Troubleshooting 5. Warranty, Safety & Specifications Standard Accessories RCARedcat Access all-in-one system 16V-2.0-NA16V/2.0A power supply for Redcat Access, U.S. and Canada 16V-2.0-_16V/2.0A power supply for Redcat Access, specify country FMFlexmike classroom microphone with battery pack NH2.4VAA NiMH rechargeable battery pack for Flexmike, one per Flexmike FLFlexmike lavaliere cord USB2-NATransmitter wall charger, U.S. and Canada USB2-INTTransmitter wall charger, specify country USB-MCBUSB Type A-Micro B charging cable for Flexmike Optional Accessories FCAD-4Flexcat for small group instruction* SMHandheld microphone with battery pack NH2APKAA NiMH rechargeable battery pack for Sharemike, one per Sharemike USBDC-5Charging cable for Sharemike 4 4 3 3 *For further information on Flexcat for small group instruction, please visit www.lightspeed-tek.com 7 1. Overview 2. Set Up & Use / Daily Operation 3. Optional Accessories 4. Maintenance & Troubleshooting 5. Warranty, Safety & Specifications TOP PANEL CONTROLS FRONT PANEL INDICATORS 1POWER2 1 22 1. MIC VOLUME: Controls the volume level of the microphones. 2. TONE CONTROL: Adjusts the audio tone, adding more bass or treble for a more rich or crisp sound. MICROPHONE VOLUME MINMAXBASSTREBLE TONE 1 2 1. POWER ON INDICATOR: The power light will glow blue when power is applied. 2. MIC 1 & MIC 2: Mic link and registration indicators a. Flashing amber indicates registration is in process. b. Solid green indicates a link has been established. 8 1. Overview 2. Set Up & Use / Daily Operation 3. Optional Accessories 4. Maintenance & Troubleshooting 5. Warranty, Safety & Specifications SIDE PANEL CONTROLS AND CONNECTIONS 1. REGISTRATION: Press this button if there is a new component, such as a microphone, to be registered. 2. AUDIO INPUT JACK & VOLUME CONTROL: 3.5mm stereo connector for connecting classroom audio sources to the Redcat Access. Controls the volume level of the audio input from the connected audio source. 3. AUDIO OUTPUT JACK & VO…

Text truncated - open the document above for the full version.

Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. TEL: 886-3-3276173 FAX: 886-3-3276188 1 Authorization Letter FCC ID: ORV-LSSM Device Name: ShareMike Model No.: SM Date: 2/24/2014 Federal Communications Commission To whom it may concern: I, the undersigned, hereby authorize Jacko Yang of ELECTRONICS TESTING CENTER, TAIWAN and hereafter referred to as ETC, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by ETC on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ELECTRONICS TESTING CENTER, TAIWAN as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, By: By: Michael A. Frost (Signature) (Printed) Title : Sr. Acoustic Engineer Applicant : Lightspeed Technologies Inc. Address : 11509 SW Herman Road, Tualatin, OR 97062 USA Tel : 800-732-8999 Fax: 503-684-3197

Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. TEL: 886-3-3276173 FAX: 886-3-3276188 1 Confidentiality Request Letter FCC ID: ORV-LSSM Device Name: ShareMike Model No.: SM Date: 2/24/2014 Ref: Request for Confidentiality Dear Sir: With regard to the referenced application, Lightspeed Technologies Inc. is requesting confidentiality of certain sections of the accompanying documents. The documents for which Lightspeed Technologies Inc. is requesting confidentiality are: Exhibit Type File Name Block Diagrams Block Diagrams.pdf Schematic Diagrams Schematic Diagrams.pdf Operation Description Operation Description.pdf This request is made under the provisions of Section 0.457(d) of the Commission’s Rules, and Section 552(b)(4) of the Freedom of Information Act. The material for which confidentiality is requested falls within the scope of Section 552(b)(4) as trade secrets and includes material covered by Section 0.459 of the Commission’s Rules. Sincerely, By: By: Michael A. Frost (Signature) (Printed) Title : Sr. Acoustic Engineer Applicant : Lightspeed Technologies Inc. Address : 11509 SW Herman Road, Tualatin, OR 97062 USA Tel : 800-732-8999 Fax: 503-684-3197 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. TEL: 886-3-3276173 FAX: 886-3-3276188 2 Authorization Letter FCC ID: ORV-LSSM Device Name: Sharemike Model No.: SM Date: 2/24/2014 Federal Communications Commission To whom it may concern: I, the undersigned, hereby authorize the of ELECTRONICS TESTING CENTER, TAIWAN and hereafter referred to as ETC, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by ETC on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ELECTRONICS TESTING CENTER, TAIWAN as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, By: By: Michael A. Frost (Signature) (Printed) Title : Sr. Acoustic Engineer Applicant : Lightspeed Technologies Inc. Address : 11509 SW Herman Road, Tualatin, OR 97062 USA Tel : 800-732-8999 Fax: 503-684-3197 Company Letter Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. TEL: 886-3-3276173 FAX: 886-3-3276188 3 User Manual Information Following information please add in the user manual: FCC Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference). • Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna. • Connect the telecommunications equipment into an ou…

Text truncated - open the document above for the full version.

UTAM Affidavit Letter Date：10/22/2013 UTAA{, Inc. |rffidavit of Participatio4 FCC Section 15 .307(b) Affidavit l, Michael Stima, Managing Director of UTAM, tnc., hereby swear and affirm that: Lightspeed Technologies Inc. is a participating member of UTAM, lnc. in good standing for purposes of Section 15.307(b) of the FCC rules. Subscribed to and sworn this 25th day of luly,2OtL UTAM, lnc. P.O. Box 8126 Bridgewater, New JerseY 08807 Tel: (508) 526-3636 ichael Stima, Managing Director Affidavit #: 1TSP072511 UTAM Affidavit LetterPage1/1

FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page A1 of A3 ANNEX A: EXTERNAL CONSTRUCTION PHOTOS OF EUT 1. Outside view 1 of EUT 2. Outside view 2 of EUT FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page A2 of A3 3. Outside view 1 of Adapter 4. Outside view 2 of Adapter FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page A3 of A3 5. Outside view 3 of Adapter

FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page B1 of B4 ANNEX B: INTERNAL CONSTRUCTION PHOTOS OF EUT 1. Inside View 1 of EUT 2. Inside View 2 of EUT FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page B2 of B4 3. Inside View 3 of EUT 4. Inside View 4 of EUT FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page B3 of B4 5. Module 6. Antenna FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page B4 of B4 7. Front view of PCB 8. Rear view of PCB

FCC ID:ORV-LSSM IC ID: 1732B-LSSM Report No.: 14-02-MAS-013-05 Electronics Testing Center, Taiwan No.8, Lane 29, WenMing Road Leshan Tsuen Guishan Shiang Taoyuan County 33383, Taiwan R.O.C. Page 1 of 74 Report No.: 14-02-MAS-013-05 Client: Lightspeed Technologies Inc. ID Product: Wireless Handheld Microphone IC Product: Sharemike Model: SM FCC ID: ORV-LSSM IC ID: 1732B-LSSM Manufacturer/supplier: REOR ELECTRONICS CO., LTD. Date test item received: 2014/02/06 Date test campaign completed: 2014/04/21 Date of issue: 2014/04/21 Test Result: ■ Compliance □ Not Compliance Statement of Compliance: The SAR values measured for the test sample are below the maximum recommended level of 1.6 W/kg averaged over any 1g tissue according to FCC KDB 865664 D01 SAR Measurement 100 MHz to 6GHz and Industry Canada RSS-102 (Issue 4, 2010). The test result onl y corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 74 pages Test Engineer Hsin-Pei Checked by Perry Lin Approved by James Cheng The testing described in this report has been carried out to the best of our knowledge and ability, and our responsibility is limited to the exercise of reasonable care. This certification is not intended to believe the sellers from their legal and/or contractual obligations. SAR (Specific Absorption Rate) Evaluation Report For FCC KDB 865664 D01 and Industry Canada RSS-102 Issue 4 FCC ID:ORV-LSSM IC ID: 1732B-LSSM Report No.: 14-02-MAS-013-05 Electronics Testing Center, Taiwan No.8, Lane 29, WenMing Road Leshan Tsuen Guishan Shiang Taoyuan County 33383, Taiwan R.O.C. Page 2 of 74 Applicant Information Client : Lightspeed Technologies Inc. Address : 11509 SW Herman Rd., Tualatin, OR 97062, U.S.A Manufacturer : REOR ELECTRONICS CO., LTD. Address : 5F, No. 122, Caohe Rd., Jhonghe Dist., New Taipei City 235, Taiwan. ID EUT : Wireless Handheld Microphone IC EUT : Sharemike Model No. : SM Standard Applied : FCC KDB 865664 D01 SAR Measurement 100MHz to 6 GHz v01r03.(Feb 07, 2014) Industry Canada RSS-102 Issue 4 (March, 2010) IEEE Standard 1528-2013 Test Location : Electronics Testing Center, Taiwan (www.etc.org.tw) No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang,Taoyuan County 33383, Taiwan, R.O.C. The Mobility Enhanced Cordless devices is in compliance with the FCC Report and Order 93-326 and Health Canada Safety Code 6, and the tests were performed according to the FCC KDB 8655664 D01 and RSS-102 for uncontrolled exposure. FCC ID:ORV-LSSM IC ID: 1732B-LSSM Report No.: 14-02-MAS-013-05 Electronics Testing Center, Taiwan No.8, Lane 29, WenMing Road Leshan Tsuen Guishan Shiang Taoyuan County 33383, Taiwan R.O.C. Page 3 of 74 Table of Contents EXECUTIVE SUMMARY........................................................................................................................ 5 1 GENERAL INFORMATION................................................................................................................. 6 1.1 Description of Equipment Under Test .......................................................................................... 6 1.2 Photograph of EUT ....................................................................................................................... 6 1.3 Environment Conditions ............................................................................................................... 7 1.4 Test Standards ............................................................................................................................... 7 1.4.1 RF Exposure Limits (According to ECR 1999/519/EC)...................................................................7 1.5 The SAR Measurement Procudure for Mobile ............................................................................. 8 1.5.1 General Requirements ..........................................................................................................................8 1.5.2 Phantom Requirements ........................................................................................................................8 1.5.3 Test Positions .......................................................................................................................................8 1.5.4 Test Procedures ....................................................................................................................................8 2 DESCRIPTION OF THE TEST EQUIPMENT......................................................................................... 9 2.1 Test Equipment List ...................................................................................................................... 9 2.2 DASY4 Measurement System Diagram ..................................................................................... 10 2.3 DASY4 Measurement Server...................................................................................................... 12 2.4 DAE (Data Acquisition Electronics)........................................................................................... 13 2.5 Phantom....................................................................................................................................... 14 2.6 Device Holder ............................................................................................................................. 15 2.7 Specifications of Probes .............................................................................................................. 15 2.8 Measurement Procedures in DASY4 .......................................................................................... 16 2.9 Simulating Liquids ...................................................................................................................... 16 2.10 Justification for Extended SAR Dipole Calibrations ................................................................ 17 2…

Text truncated - open the document above for the full version.

FCC ID: ORV-LSSM Sheet 1 of 86 Sheets ETC Report No.: 14-02-MAS-013-03 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D Report No.: 14-02-MAS-013-03 Client: Lightspeed Technologies Inc. Product: ShareMike Model: SM FCC ID: ORV-LSSM Manufacturer/supplier: REOR ELECTRONICS CO., LTD. Date test item received: 2014/02/06 Date test campaign completed: 2014/04/17 Date of issue: 2014/04/17 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 86 pages Total number of pages of photos: External photos 3 pages Internal photos 4 pages Setup photos 5 pages Test Engineer Checked By Approved By John Li Perry Lin James Cheng FCC ID: ORV-LSSM Sheet 2 of 86 Sheets ETC Report No.: 14-02-MAS-013-03 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 Table of Contents Page 1 GENERAL INFORMATION......................................................................................................... 4 1.1 Testing Laboratory..................................................................................................................... 4 1.2 Client Information....................................................................................................................... 4 1.3 Manufacturer...............................................................................................................................4 2 TEST INFORMATION................................................................................................................... 5 2.1 Description of Tested Device(s)............................................................................................... 5 2.2 Test Environment....................................................................................................................... 5 3 TEST REPORT SUMMARY......................................................................................................... 6 3.1 Test Summary............................................................................................................................ 6 3.2 Other Comments........................................................................................................................ 7 4 TEST SETUP.................................................................................................................................. 8 4.1 Frequency and Timing Measurements................................................................................... 8 4.2 Conducted Emission Tests....................................................................................................... 8 4.3 Radiated Emission Tests.......................................................................................................... 9 4.4 Power line Conducted Tests.................................................................................................... 9 4.5 Monitoring Tests....................................................................................................................... 10 5 TEST EQUIPMENT LIST............................................................................................................ 11 6 TEST RESULT............................................................................................................................. 12 6.1 Coordination with fixed microwave........................................................................................ 12 6.2 Cross Reference...................................................................................................................... 13 6.3 Field Strength Calculation....................................................................................................... 16 6.4 Labeling Requirements........................................................................................................... 17 6.5 Power line Conducted Emissions.......................................................................................... 18 6.6 Result Data Calculation........................................................................................................... 21 6.7Antenna Requirement............................................................................................................... 22 6.8 Digital Modulation Techniques............................................................................................... 22 6.9 Peak Transmit Power.............................................................................................................. 23 6.10 Power Spectral Density......................................................................................................... 27 6.11 Antenna Gain.......................................................................................................................... 31 6.12 Automatic discontinuation of transmission......................................................................... 31 6.13 Safety exposure levels.......................................................................................................... 32 6.14 Emission Bandwidth B.......................................................................................................... 33 6.15 Monitoring time....................................................................................................................... 36 FCC ID: ORV-LSSM Sheet 3 of 86 Sheets ETC Report No.: 14-02-MAS-013-03 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 6.16 Monitoring threshold............................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page 1 of 5 Photos of Radiation Measuring Setup With Adapter x-axis FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page 2 of 5 y-axis z-axis FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page 3 of 5 Without Adapter x-axis FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page 4 of 5 y-axis z-axis FCC ID: ORV-LSSM ETC Report No.: 14-02-MAS-013-03 Page 5 of 5 Photos of Conduction Measuring Setup