ORV-LSTCATopcat

User Manual Classroom Audio System AUDIO INMICROPHONEAUDIO OUT POWER MIN LINK MAXMINMAXMINMAX PRELIMINARY IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use the apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding- type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/ accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. When the mains plug or appliance coupler is used as the disconnect device, it shall remain readily accessible. 16. Please keep the unit in a good ventilation environment. 17. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 18. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 19. Warning - battery pack shall not be exposed to excessive heat such as sunshine, fire or the like. 2 IMPORTANT SAFETY INSTRUCTIONS CONT’D 3 To avoid potential equipment damage and/or serious injury, READ AND FOLLOW all safety precautions when installing the TOPCAT. WARNINGS are included throughout the procedural steps in this guide, and are repeated below for emphasis. • USE A LICENSED ELECTRICIAN FOR POWER CONNECTIONS. The TOPCAT system uses standard 100 – 240VAC power. Obtain the services of a licensed electrician when supplying and connecting power to the ceiling enclosure. BE SURE electrical installation complies with local building codes. Improperly installing and/or connecting power to the system may result in EQUIPMENT DAMAGE, serious INJURY and/or DEATH. • DO NOT INSTALL ALONE. The ceiling enclosure weighs approximately 20 lbs (9 kg), and requires at least two people to install. DO NOT install alone. • USE SUITABLE LADDERS. use proper ladders or support platforms when installing the TOPCAT enclosure. DO NOT stand on chairs, tables, or other unsuitable surfaces. • SUPPORT THE CEILING ENCLOSURE PROPERLY. DO NOT allow the full weight of the ceiling enclosure to rest on the tile grid of the ceiling. The ceiling enclosure is designed to be suspended at TWO POINTS by suspension wires (secured to rafters or other suitable building structure) and to rest LIGHTLY on the tile grid. TABLE OF CONTENTS SECTION 1: 2Important Safety Instructions Overview6System Components and Unpacking 7Optional Components Controls & Connections 9 Topcat Side Panel 10 Media Connector 12 Flexmike 13 Wall Charger SECTION 2:141. Turn the System On Daily Operation152. Remove Flexmike from charger 3. Private Conversations 4. End of Day 165. Using the Media Connector 176. Audio Integration 187. Tips to Obtain Optimum Audio Performance SECTION 3:Sharemike Optional Accessories19 Controls & Connectios 20 Charging 21 Initial Set-up 21 PageFirst Interface 22 Amplifying External Audio Equipment 23 Output to Assistive Listening Device (ALD) SECTION 4:24Battery Replacement for Flexmike Maintenance &25Battery Replacement for Sharemike Troubleshooting26Troubleshooting SECTION 5:27Five-Year Limited Warranty Warranty, Safety 28Safety Warnings & Certifications & Specifications29Précautions de Sécurité et Certifications 30System Specifications 6 1. Overview 2. Daily Operation 3. Optional Accessories 4. Troubleshooting 5. Warranty, Safety & Specifications SYSTEM COMPONENTS AND UNPACKING The standard configuration of the TOPCAT ® will contain: TOPCAT Media Connector and Power Supply AUDIO INMICROPHONEAUDIO OUT POWER MIN LINK MAXMINMAXMINMAX SECTION 1: OVERVIEW NOTE ON REGISTRATION: The Topcat, Microphone(s), and Media Connector are registered together at the factory and are labeled as such with ID numbers. If registered components are separated and swapped during the installation process, they must be re-registered. Please refer to the registration instructions in the Troubleshooting section of the User Manual. If components must be separated, we recommend that the microphone(s), Media Connector and/or the accessory box be labeled with the room number of the Topcat that the components are registered with for proper dispersement. 7 1. Overview 2. Daily Operation 3. Optional Accessories 4. Troubleshooting 5. Warranty, Safety & Specifications Wall Charger for Flexmike Flexmike Volume Control Microphone SYSTEM COMPONENTS AND UNPACKING CONT’D Audio Cable Kit OPTIONAL COMPONENTS Optional equipment which may be part of your Topcat system: Sharemike Handheld Mic & Charger Cable DC Extension Cable 1 2 8 1. Overview 2. Daily Operation 3. Optional Accessories 4. Troubleshooting 5. Warranty, Safety & Specifications Standard Componen…

Text truncated - open the document above for the full version.

Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. TEL: 886-3-3276173 FAX: 886-3-3276188 1 Authorization Letter FCC ID: ORV-LSTCA Device Name: Topcat Model No.: TCA Date: 9/17/2014 Federal Communications Commission To whom it may concern: I, the undersigned, hereby authorize Jacko Yang of ELECTRONICS TESTING CENTER, TAIWAN and hereafter referred to as ETC, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by ETC on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ELECTRONICS TESTING CENTER, TAIWAN as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product  compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, By: By: Michael A. Frost (Signature) (Printed) Title : Sr. Acoustic Engineer Applicant : Lightspeed Technologies, Inc. Address : 11509 SW Herman Rd. Tualatin, OR 97062 Tel : 800-732-8999 Fax: 503-684-3197

Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. TEL: 886-3-3276173 FAX: 886-3-3276188 1 Confidentiality Request Letter FCC ID: ORV-LSTCA Device Name: Topcat Model No.: TCA Date: 9/23/2014 Ref: Request for Confidentiality Dear Sir: With regard to the referenced application, Lightspeed Technologies Inc. is requesting confidentiality of certain sections of the accompanying documents. The documents for which Lightspeed Technologies Inc. is requesting confidentiality are: Exhibit Type File Name Block Diagrams Block Diagrams.pdf Schematic Diagrams Schematic Diagrams.pdf Operation Description Operation Description.pdf This request is made under the provisions of Section 0.457(d) of the Commission’s Rules, and Section 552(b)(4) of the Freedom of Information Act. The material for which confidentiality is requested falls within the scope of Section 552(b)(4) as trade secrets and includes material covered by Section 0.459 of the Commission’s Rules. Sincerely, By: By:Michael A. Frost (Signature) (Printed) Title : Sr. Acoustic Engineer Applicant : Lightspeed Technologies, Inc. Address : 11509 SW Herman Rd. Tualatin, OR 97062 Tel : 800-732-8999 Fax: 503-684-3197

UTAM Affidavit Letter Date：10/22/2013 UTAA{, Inc. |rffidavit of Participatio4 FCC Section 15 .307(b) Affidavit l, Michael Stima, Managing Director of UTAM, tnc., hereby swear and affirm that: Lightspeed Technologies Inc. is a participating member of UTAM, lnc. in good standing for purposes of Section 15.307(b) of the FCC rules. Subscribed to and sworn this 25th day of luly,2OtL UTAM, lnc. P.O. Box 8126 Bridgewater, New JerseY 08807 Tel: (508) 526-3636 ichael Stima, Managing Director Affidavit #: 1TSP072511 UTAM Affidavit LetterPage1/1

FCC ID: ORV-LSTCA ETC Report No.: 14-08-MAS-077-03 Page A1 of A3 ANNEX A: EXTERNAL CONSTRUCTION PHOTOS OF EUT 1. Outside view 1 of EUT 2. Outside view 2 of EUT FCC ID: ORV-LSTCA ETC Report No.: 14-08-MAS-077-03 Page A2 of A3 3. Outside view 1 of Adapter 4. Outside view 2 of Adapter FCC ID: ORV-LSTCA ETC Report No.: 14-08-MAS-077-03 Page A3 of A3 5. Outside view 3 of Adapter

LABEL P/N: 334-0157-00 Input: 24V/2.5A Model: TCA Rating: 100-240V~ 50-60Hz., 1.5A: PILOT VERSION NOT FOR RESALE TRX-TCA-YYMMDD-XXXX TRX-TCA-YYMMDD-XXXX MFG. YEAR: MONTH.YEAR x-x.xx THE CABLE INSTALL LABEL (YELLOW) SHOULD BE NEAR THE WIRING FOR THE NXT PANEL. WE’VE FOUND THAT INSTALLERS NEED TO ENSURE THE WIRE DOES NOT TOUCH THE PANEL. LOCATING IT ANYWHERE ELSE BUT BESIDE THE WIRING WOULD DEFEAT THE PURPOSE. THE NAMEPLATE ALREADY HAS A CUTOUT INSIDE - WE SHOULD USE IT. THE SERIAL NUMBER AND SW REVISION LABEL SHOULD BE PLACED ABOVE THE NAMEPLATE. THE FCC PART 15 (FOR PRODUCTION ONLY - NOT PILOT) SHOULD BE PLACED IN THE AREA.

FCC ID: ORV-LSTCA ETC Report No.: 14-08-MAS-077-03 Page B1 of B4 ANNEX B: INTERNAL CONSTRUCTION PHOTOS OF EUT 1. Inside View 1 of EUT 2. Inside View 2 of EUT FCC ID: ORV-LSTCA ETC Report No.: 14-08-MAS-077-03 Page B2 of B4 3. Inside View 3 of EUT 4. DECT Module FCC ID: ORV-LSTCA ETC Report No.: 14-08-MAS-077-03 Page B3 of B4 5. Zigbee Module 6. Front view of PCB FCC ID: ORV-LSTCA ETC Report No.: 14-08-MAS-077-03 Page B4 of B4 7. Rear view of PCB

FCC ID: ORV-LSTCA Sheet 32 of 87 Sheets ETC Report No.: 14-08-MAS-077-03 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 6.13 Safety exposure levels 6.13.1 Standard Applicable: FCC 15.319(i) UPCS devices are subject to the radio frequency radiation exposure requirements specified in FCC parts 1.1307 (b), 2.1091 and 2.1093, as appropriate. All equipment shall be considered to operate in a “general population / uncontrolled environment. For portable devices tests according to IEEE 1528 are requested, if applicable. 6.13.2 Measurement procedure Consideration of radio frequency radiation exposure for EUT is done as SAR test according OET65c (for PP) MPE calculation as below (for FP, Repeater) SAR test results: See SAR test report. MPE calculation: not applicable The EUT is considered as a mobile device according to OET Bulletin 65, Edition -97-01. Therefore distance to human body of min. 20 cm is determined. The limit of Power density for General Population / Umcontrolled Exposure is 1.0 mW/cm². Formula: S = EIRP / 4πR² Calculation: Radio Technology Operation Frequency (MHz) Distance (cm) Maximum Peak Output Power (dBm) Antenna Gain (dBi) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) DECT 1928 20 12.52 -2 0.002242 1 ZigBee 2405 20 1.43 -2 0.000174 1 FCC ID: ORV-LSTCA Sheet 33 of 87 Sheets ETC Report No.: 14-08-MAS-077-03 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 Simultaneous Evaluation: ZigBee 2.4GHz and DECT radio can transmit simultaneously. The formula of calculated MPE is: CPD1/LPD1+CPD2/LPD2+...etc. ＜ 1 CPD=Calculated Power Density LPD=Limit of Power Density Radio Technology Worse CPD (mW/cm 2 ) ZigBee 0.000174 DECT 0.002242 The MPE evaluation is 0.000174/1+0.002242/1=0.002416＜1, which confirm the device comply the MPE limit. 6.13.3 Results： Complies

FCC ID: ORV-LSTCA Sheet 1 of 87 Sheets ETC Report No.: 14-08-MAS-077-03 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D Report No.: 14-08-MAS-077-03 Client: Lightspeed Technologies Inc. Product: Topcat Model: TCA FCC ID: ORV-LSTCA Manufacturer/supplier: REOR ELECTRONICS CO., LTD. Date test item received: 2014/01/28 Date test campaign completed: 2014/09/03 Date of issue: 2014/09/03 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 87 pages Total number of pages of photos: External photos 3 pages Internal photos 4 pages Setup photos 2 pages Test Engineer Checked By Approved By John Li Perry Lin James Cheng FCC ID: ORV-LSTCA Sheet 2 of 87 Sheets ETC Report No.: 14-08-MAS-077-03 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 Table of Contents Page 1 GENERAL INFORMATION......................................................................................................... 4 1.1 Testing Laboratory..................................................................................................................... 4 1.2 Client Information....................................................................................................................... 4 1.3 Manufacturer...............................................................................................................................4 2 TEST INFORMATION................................................................................................................... 5 2.1 Description of Tested Device(s)............................................................................................... 5 2.2 Test Environment....................................................................................................................... 5 3 TEST REPORT SUMMARY......................................................................................................... 6 3.1 Test Summary............................................................................................................................ 6 3.2 Other Comments........................................................................................................................ 7 4 TEST SETUP.................................................................................................................................. 8 4.1 Frequency and Timing Measurements................................................................................... 8 4.2 Conducted Emission Tests....................................................................................................... 8 4.3 Radiated Emission Tests.......................................................................................................... 9 4.4 Power line Conducted Tests.................................................................................................... 9 4.5 Monitoring Tests....................................................................................................................... 10 5 TEST EQUIPMENT LIST............................................................................................................ 11 6 TEST RESULT............................................................................................................................. 12 6.1 Coordination with fixed microwave........................................................................................ 12 6.2 Cross Reference...................................................................................................................... 13 6.3 Field Strength Calculation....................................................................................................... 16 6.4 Labeling Requirements........................................................................................................... 17 6.5 Power line Conducted Emissions.......................................................................................... 18 6.6 Result Data Calculation........................................................................................................... 21 6.7 Antenna Requirement............................................................................................................. 22 6.8 Digital Modulation Techniques............................................................................................... 22 6.9 Peak Transmit Power.............................................................................................................. 23 6.10 Power Spectral Density......................................................................................................... 27 6.11 Antenna Gain.......................................................................................................................... 31 6.12 Automatic discontinuation of transmission......................................................................... 31 6.13 Safety exposure levels.......................................................................................................... 32 6.14 Emission Bandwidth B.......................................................................................................... 34 6.15 Monitoring time....................................................................................................................... 38 FCC ID: ORV-LSTCA Sheet 3 of 87 Sheets ETC Report No.: 14-08-MAS-077-03 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 6.16 Monitoring threshold...........................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: ORV-LSTCA ETC Report No.: 14-08-MAS-077-03 Page 1 of 2 Photos of Radiation Measuring Setup FCC ID: ORV-LSTCA ETC Report No.: 14-08-MAS-077-03 Page 2 of 2 Photos of Conduction Measuring Setup