OVF-K33BIC04Single Band CDMA Cellular Phone

User Guide1 user guide Domino S1310 2 Domino S1310 User Guide This manual is based on the production version of the Kyocera S1310 phone. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents: 4,901,307 5,109,390 5,267,262 5,416,797 5,506,865 5,544,196 5,657,420 5,101,501 5,267,261 5,414,796 5,504,773 5,535,239 5,600,754 5,778,338 5,228,054 5,337,338 5,710,784 5,056,109 5,568,483 5,659,569 5,490,165 5,511,073 The Kyocera Communications Inc. (“KCI”) products described in this manual may include copyrighted KCI and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for KCI and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the KCI products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law. Furthermore, the purchase of the KCI products shall not be deemed to grant—either directly or by implication, estoppel, or otherwise—any license under the copyrights, patents, or patent applications of KCI or any third party software provider, except for the normal, non-exclusive royalty-free license to use that arises by operation of law in the sale of a product. Kyocera is a registered trademark of Kyocera Corporation. Brick Attack and Race 21 are trademarks of Kyocera Wireless Corp. QUALCOMM is a registered trademark of QUALCOMM Incorporated. Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. TransFlash is a trademark of SanDisk Corporation. All other trademarks are the property of their respective owners. Copyright © 2009 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2009 Kyocera Wireless Corp. 82-L2707-1EN, Rev. 001 FCC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Communications Inc. (KCI) supplied and approved accessory designed for this product. Using accessories that are not supplied or approved by KCI may violate FCC RF exposure guidelines. Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 15 mm separation distance including the antenna and the user’s body. THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured to not exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Generic DRAFT User Guide3 Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified by the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. Body-worn measurements differ among phone models, depending upon availability of accessories and FCC requirements. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section www.fcc.gov/oet/ea after searching on the FCC ID: OVF-K33BIC04. Additional information on SAR can be found on the Cellular Telecommunications and Internet Association (CTIA) web-site at www.ctia.org. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Caution The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the warranty and user’s authority to operat…

Text truncated - open the document above for the full version.

FCC ID: OVF-K33BIC04 Cover Letter 1 Model: K33BIC-04 December 14, 2009 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application for Cellular Transceiver Certification To Whom It May Concern: Kyocera Wireless Corporation (KWC) herein submits the Application for Equipment Authorization (FCC Form 731) and Exhibits for Certification of a Cellular Transceiver, FCC ID: OVF-K33BIC04 Applicant: Kyocera Wireless Corp. 10300 Campus Point Drive San Diego, CA 92121-1522 Manufacture: Kyocera Wireless Corp. 10300 Campus Point Drive San Diego, CA 92121 The equipment is for mobile station cellular system use. The OVF-K33BIC04 is in full compliance with all parts of EIA/TIA/IS-98-B&D Mobile Station-Land Station Compatibility Specification, issue July 2000 and March 2001, and also in full compliance with all parts of ANSI J-STD-08, Recommended Minimum Performance Requirements for 1.8 to 2 GHz Code Division Multiple Access (CDMA) Personal Stations, issue July 1996. Please contact me at Tel: (858) 882-2197 or Email: [email protected] if there are any questions or if any additional information is needed. Thuy To Regulatory Engineer Kyocera Wireless Corp.

FCC ID: OVF-K33BIC04 Kyocera Wireless Corp. Page 1 of 1 Model: K33BIC-04 December 14, 2009 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request of Confidentiality for FCC ID: OVF-K33BIC04 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Kyocera Wireless Corp (KWC) hereby requests confidential and treatment of information accompanying this Application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also requesting Short-Term Confidentiality as outlined in Public Notice DA 04-1705. This provision will give KWC Temporary Confidentiality of commercially sensitive information prior to product launch. The requested Confidential and Temporary Confidential exhibits are listed in table 1 below: Table 1. Confidential and Short-Term Confidential Exhibit Description 1A, 1B Operation Descriptions, Tune-up Procedure 2 Block diagrams 3 Schematics Confidential 4 Parts Lists 5 Instruction Manual 7 External Photos 8 Internal Photos 9E SAR Test Setup Photos 11B EMC Test Setup Photos 12D HAC RF Test Setup Photos Short-Term Confidential 13E T-Coil Test Setup Photos The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Thuy To Regulatory Engineer Kyocera Wireless Corp.

FCC ID: OVF-K33BIC04 Exhibit 7: External Photos Internal Photos Page 1 of 1 Model: K33BIC-04

FCC ID: OVF-K33BIC04 Label Information Page 1 of 2 Model: K33BIC-04 Exhibit 6: ID Label Format Location Phone back view Battery compartment FCC Label FCC ID: OVF-K33BIC04 Label Information Page 2 of 2 Model: K33BIC-04 FCC declaration statement Kyocera Wireless Corp. complies with FCC rules Part 2.925(d) that the label shall be permanently affixed to the equipment and shall be readily visible to the purchaser at the time of purchase: 1) This cellular phone has limited label space on the exterior of the unit. The FCC ID label is placed in the battery compartment. 2) The batteries for these devices are designed for easy removal and that the labels will be visible whenever the batteries are removed for charging or replacement. The phone will be market without the battery installed.

FCC ID: OVF-K33BIC04 Internal Photos Page 1 of 5 Model: K33BIC-04 Exhibit 8: Internal Photos FCC ID: OVF-K33BIC04 Internal Photos Page 2 of 5 Model: K33BIC-04 FCC ID: OVF-K33BIC04 Internal Photos Page 3 of 5 Model: K33BIC-04 FCC ID: OVF-K33BIC04 Internal Photos Page 4 of 5 Model: K33BIC-04 FCC ID: OVF-K33BIC04 Internal Photos Page 5 of 5 Model: K33BIC-04

FCC ID: OVF-K33BIC04 SAR Report Page 1 of 20 Model: K33BIC-04 SAR Test Report on Single-Band CDMA Cellular Phone FCC Part 24 Certification FCC ID: OVF-K33BIC04 MODEL: K33BIC-04 DATE: December 10, 2009 STATEMENT OF COMPLIANCE Kyocera Wireless Corp declares under its sole responsibility that the product, FCC ID: OVF- K33BIC04 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted: NONE. Date of Test: December 10, 2009 Test performed by: Kyocera Wireless Corp. 10300 Campus Point Drive San Diego, CA 92121 Report Prepared and Reviewed by: Thuy To, Regulatory Engineer Report Approved by: C.K. Li, Director of Regulatory Engineering FCC ID: OVF-K33BIC04 SAR Report Page 2 of 20 Model: K33BIC-04 Table of Contents 1 INTRODUCTION.............................................................................................................................................................. 3 2 EQUIPMENT UNDER TEST (EUT) ............................................................................................................................... 3 3 PRODUCT DESCRIPTION ............................................................................................................................................. 4 4 ACCESSORIES: ................................................................................................................................................................ 4 5 SAR TEST RESULT SUMMARY ................................................................................................................................... 5 5.1 MAXIMUM RESULTS FOUND DURING SAR EVALUATION.............................................................................................. 5 5.2 HEAD CONFIGURATION................................................................................................................................................. 5 5.3 BODY WORN CONFIGURATION...................................................................................................................................... 5 5.4 MEASUREMENT UNCERTAINTY..................................................................................................................................... 5 6 TEST CONDITIONS......................................................................................................................................................... 6 6.1 AMBIENT CONDITIONS.................................................................................................................................................. 6 6.2 RF CHARACTERISTICS OF THE TEST SITE....................................................................................................................... 6 6.3 TEST SIGNAL, FREQUENCIES AND OUTPUT POWER....................................................................................................... 6 6.3.1 CDMA2000 Test conditions ................................................................................................................................. 6 6.4 DEVICE TEST CONDITIONS............................................................................................................................................ 7 6.5 MULTIPLE TRANSMITTERS AND ANTENNAS SAR EVALUATIONS.................................................................................. 8 6.5.1 Test requirement determination: .......................................................................................................................... 8 6.6 SAR TESTS IN MOUTH AND JAW REGIONS OF THE SAM PHANTOM............................................................................. 9 7 DESCRIPTION OF THE TEST EQUIPMENT ........................................................................................................... 10 7.1 DOSIMETRIC SYSTEM.................................................................................................................................................. 10 7.2 ADDITIONAL EQUIPMENT NEEDED IN VALIDATION...................................................................................................... 11 7.3 TISSUE STIMULANTS NEED AWS AND BLUETOOTH LIQUID........................................................................................ 11 7.4 PHANTOMS DESCRIPTION............................................................................................................................................ 11 7.5 ISOTROPIC E-FIELD PROBE.......................................................................................................................................... 12 8 SYSTEM VALIDATION ................................................................................................................................................ 13 9 DESCRIPTION OF THE TEST PROCEDURE........................................................................................................... 14 9.1 TEST POSITIONS.......................................................................................................................................................... 14 9.1.1 Initial Ear Position............................................................................................................................................. 14 9.1.2 Cheek Position.................................................................................................................................................... 15 9.1.3 Tilt Position ........................................................................................................................................................ 15 9.1.4 Body Worn Configuration ...............................................................…

Text truncated - open the document above for the full version.

Date: 12/10/2009 Test Laboratory: Kyocera Wireless Corp. 1900MHz Validation @ 20dBm Probe3036, DAE527 and Dipole 5d016, 121009 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.43 mho/m; ε r = 39; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.92, 4.92, 4.92), Calibrated: 8/20/2009 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn527,Calibrated: 7/9/2009 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 56.5 V/m; Power Drift = -0.051 dB Peak SAR (extrapolated) = 7.47 W/kg SAR(1 g) = 3.96 mW/g; SAR(10 g) = 2.06 mW/g Info: Interpolated medium parameters used for SAR evaluation. 0 dB = 4.35mW/g FCC ID: OVF-K33BIC04 SAR Validation PlotsPage 1 of 2Model: K33BIC-04 Date: 12/10/2009 Test Laboratory: Kyocera Wireless Corp. 1900MHz Validation (in Muscle), Probe #3078, DAE #603, Dipole #5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: M1900,Medium parameters used: f = 1900 MHz; σ = 1.53 mho/m; ε r = 52.2; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.45, 4.45, 4.45), Calibrated: 6/22/2009 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/15/2009 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.5 V/m; Power Drift = -0.049 dB Peak SAR (extrapolated) = 6.88 W/kg SAR(1 g) = 3.94 mW/g; SAR(10 g) = 2.09 mW/g Maximum value of SAR (measured) = 4.44 mW/g 0 dB = 4.24mW/g FCC ID: OVF-K33BIC04 SAR Validation PlotsPage 2 of 2Model: K33BIC-04

Date: 12/10/2009 Test Laboratory: Kyocera Wireless Corp. FCC K33BIC04 #5939 CDMA-1900 Ch600 Left Cheek Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used: f = 1880 MHz; σ = 1.43 mho/m; ε r = 39; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Left Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.92, 4.92, 4.92), Calibrated: 8/20/2009 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn527,Calibrated: 7/9/2009 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C CDMA-1900_CH600 LC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.08 V/m; Power Drift = -0.160 dB Peak SAR (extrapolated) = 1.10 W/kg SAR(1 g) = 0.734 mW/g; SAR(10 g) = 0.473 mW/g Maximum value of SAR (measured) = 0.798 mW/g 0 dB = 0.798mW/g FCC ID: OVF-K33BIC04 SAR Data Plots (Head)Page 1 of 5Model: K33BIC-04 Date: 12/10/2009 Test Laboratory: Kyocera Wireless Corp. FCC K33BIC04 #5939 CDMA-1900 Ch600 Left Tilt Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used: f = 1880 MHz; σ = 1.43 mho/m; ε r = 39; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Left Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.92, 4.92, 4.92), Calibrated: 8/20/2009 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn527,Calibrated: 7/9/2009 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C CDMA-1900_CH600 LT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.1 V/m; Power Drift = -0.017 dB Peak SAR (extrapolated) = 0.923 W/kg SAR(1 g) = 0.578 mW/g; SAR(10 g) = 0.345 mW/g Maximum value of SAR (measured) = 0.634 mW/g 0 dB = 0.634mW/g FCC ID: OVF-K33BIC04 SAR Data Plots (Head)Page 2 of 5Model: K33BIC-04 Date: 12/10/2009 Test Laboratory: Kyocera Wireless Corp. FCC K33BIC04 #5939 CDMA-1900 Ch1175 Right Cheek Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.43 mho/m; ε r = 39; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Right Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.92, 4.92, 4.92), Calibrated: 8/20/2009 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn527,Calibrated: 7/9/2009 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C CDMA-1900_Ch 1175 RC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.78 V/m; Power Drift = 0.059 dB Peak SAR (extrapolated) = 1.86 W/kg SAR(1 g) = 1.26 mW/g; SAR(10 g) = 0.784 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.37 mW/g 0 dB = 1.37mW/g FCC ID: OVF-K33BIC04 SAR Data Plots (Head)Page 3 of 5Model: K33BIC-04 FCC ID: OVF-K33BIC04 SAR Data Plots (Head)Page 4 of 5Model: K33BIC-04 Date: 12/10/2009 Test Laboratory: Kyocera Wireless Corp. FCC K33BIC04 #5939 CDMA-1900 Ch600 Right Tilt Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used: f = 1880 MHz; σ = 1.43 mho/m; ε r = 39; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Right Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.92, 4.92, 4.92), Calibrated: 8/20/2009 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn527,Calibrated: 7/9/2009 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C CDMA-1900_CH600 RT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.5 V/m; Power Drift = 0.072 dB Peak SAR (extrapolated) = 0.741 W/kg SAR(1 g) = 0.509 mW/g; SAR(10 g) = 0.323 mW/g 0 dB = 0.543mW/g FCC ID: OVF-K33BIC04 SAR Data Plots (Head)Page 5 of 5Model: K33BIC-04

Date: 12/10/2009 Test Laboratory: Kyocera Wireless Corp. FCC K33BIC04 CDMA-1900 Ch600 Flat phone facing down with 15mm Air Space Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 Medium: M1900,Medium parameters used (interpolated): f = 1880 MHz; σ = 1.53 mho/m; ε r = 52.2; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.45, 4.45, 4.45), Calibrated: 6/22/2009 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/15/2009 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C CDMA-1900 FLAT - Face Down Ch600/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.3 V/m; Power Drift = -0.177 dB Peak SAR (extrapolated) = 1.03 W/kg SAR(1 g) = 0.644 mW/g; SAR(10 g) = 0.385 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.707 mW/g 0 dB = 0.707mW/g FCC ID: OVF-K33BIC04 SAR Data Plots (Body)Page 1 of 3Model: K33BIC-04 FCC ID: OVF-K33BIC04 SAR Data Plots (Body)Page 2 of 3Model: K33BIC-04 Date: 12/10/2009 Test Laboratory: Kyocera Wireless Corp. FCC K33BIC04 CDMA-1900 Ch600 Flat phone facing up with 15mm Air Space Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 Medium: M1900,Medium parameters used (interpolated): f = 1880 MHz; σ = 1.53 mho/m; ε r = 52.2; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.45, 4.45, 4.45), Calibrated: 6/22/2009 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/15/2009 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C CDMA-1900 FLAT - Face Up Ch600/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.17 V/m; Power Drift = 0.012 dB Peak SAR (extrapolated) = 0.563 W/kg SAR(1 g) = 0.395 mW/g; SAR(10 g) = 0.257 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.421 mW/g CDMA-1900 FLAT - Face Up Ch600/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.17 V/m; Power Drift = 0.012 dB Peak SAR (extrapolated) = 0.582 W/kg SAR(1 g) = 0.376 mW/g; SAR(10 g) = 0.228 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.407 mW/g 0 dB = 0.421mW/g FCC ID: OVF-K33BIC04 SAR Data Plots (Body)Page 3 of 3Model: K33BIC-04

Probe Calibration Parameters Model: K33BIC-04 Appendix C: Probe Calibration Parameters FCC ID: OVF-K33BIC04

Dipole Calibration Parameters Model: K33BIC-04 Appendix D: Dipole Calibration Parameters FCC ID: OVF-K33BIC04

RADIATED EMISSIONS PORTION OF FCC CFR47 PART 24 SUBPART E CERTIFICATION TEST REPORT FOR SINGLE BAND 1XRTT CDMA PHONE FCC MODEL NUMBER: K33BIC-04 FCC ID: OVF-K33BIC04 REPORT NUMBER: 09U12980-1, Revision A ISSUE DATE: DECEMBER 18, 2009 Prepared for KYOCERA WIRELESS CORP 10300 CAMPUS POINT DRIVE SAN DIEGO, CA 92121, U.S.A. Prepared by COMPLIANCE CERTIFICATION SERVICES 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 09U12980-1A DATE: DECEMBER 18, 2009 EUT: SINGLE-BAND 1XRTT CDMA PHONE FCC ID: OVF-K33BIC04 Page 2 of 18 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. Revision History Rev. Issue Date Revisions Revised By -- 12/16/09 Initial Issue T. Chan A 12/18/09 Revised EUT description. A. Zaffar REPORT NO: 09U12980-1A DATE: DECEMBER 18, 2009 EUT: SINGLE-BAND 1XRTT CDMA PHONE FCC ID: OVF-K33BIC04 Page 3 of 18 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS.................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. FACILITIES AND ACCREDITATION.................................................................................... 5 4. CALIBRATION AND UNCERTAINTY .................................................................................. 5 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................... 5 4.2. SAMPLE CALCULATION.............................................................................................. 5 4.3. MEASUREMENT UNCERTAINTY................................................................................ 5 5. EQUIPMENT UNDER TEST ................................................................................................. 6 5.1. DESCRIPTION OF EUT................................................................................................ 6 5.2. MAXIMUM OUTPUT POWER....................................................................................... 6 5.3. SOFTWARE AND FIRMWARE..................................................................................... 6 5.4. WORST-CASE CONFIGURATION AND MODE .......................................................... 6 5.5. DESCRIPTION OF TEST SETUP................................................................................. 8 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 10 7. LIMITS AND RESULTS ...................................................................................................... 11 7.1. RADIATED OUTPUT POWER.................................................................................... 11 7.2. FIELD STRENGTH OF SPURIOUS RADIATION ....................................................... 13 8. SETUP PHOTOS................................................................................................................. 15 REPORT NO: 09U12980-1A DATE: DECEMBER 18, 2009 EUT: SINGLE-BAND 1XRTT CDMA PHONE FCC ID: OVF-K33BIC04 Page 4 of 18 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: KYOCERA WIRELESS 10300 CAMPUS POINT DRIVE SAN DIEGO, CA 92121, USA EUT DESCRIPTION: SINGLE BAND 1XRTT CDMA PHONE MODEL: K33BIC-04 SERIAL NUMBER: F0000034278648 DATE TESTED: DECEMBER 14 and 15, 2009 APPLICABLE STANDARDS STANDARD TEST RESULTS Radiated Emissions Portion of FCC Part 24E Pass Compliance Certification Services, Inc. (CCS) tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by CCS based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all …

Text truncated - open the document above for the full version.