OVFKWC-K493PCS CDMA Cellular Phone

User Guide for Kyocera K490 Phones This manual is based on the production version of the Kyocera K493LC, K494LC, and K494XLC phones. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents: 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 5,193,094 5,228,054 5,257,283 5,265,119 5,267,261 5,267,262 5,280,472 5,283,536 5,289,527 5,307,405 5,309,474 5,337,338 5,339,046 5,341,456 5,383,219 5,392,287 5,396,516 D356,560 5,408,697 5,414,728 5,414,796 5,416,797 5,426,392 5,437,055 D361,065 5,442,322 5,442,627 5,452,473 5,461,639 5,469,115 5,469,471 5,471,497 5,475,870 5,479,475 5,483,696 5,485,486 5,487,175 5,490,165 5,497,395 5,499,280 5,504,773 5,506,865 5,509,015 5,509,035 5,511,067 5,511,073 5,513,176 5,515,177 5,517,323 5,519,761 5,528,593 5,530,928 5,533,011 5,535,239 5,539,531 5,544,196 5,544,223 5,546,459 5,548,812 5,559,881 5,559,865 5,561,618 5,564,083 5,566,000 5,566,206 5,566,357 5,568,483 5,574,773 5,574,987 D375,740 5,576,662 5,577,022 5,577,265 D375,937 5,588,043 D376,804 5,589,756 5,590,069 5,590,406 5,590,408 5,592,548 5,594,718 5,596,570 5,600,754 5,602,834 5,602,833 5,603,096 5,604,459 5,604,730 5,608,722 5,614,806 5,617,060 5,621,752 5,621,784 5,621,853 5,625,876 5,627,857 5,629,955 5,629,975 5,638,412 5,640,414 5,642,398 5,644,591 5,644,596 5,646,991 5,652,814 5,654,979 5,655,220 5,657,420 5,659,569 5,663,807 5,666,122 5,673,259 5,675,581 5,675,644 5,680,395 5,687,229 D386,186 5,689,557 5,691,974 5,692,006 5,696,468 5,697,055 5,703,902 5,704,001 5,708,448 5,710,521 5,710,758 5,710,768 5,710,784 5,715,236 5,715,526 5,722,044 5,722,053 5,722,061 5,722,063 5,724,385 5,727,123 5,729,540 5,732,134 5,732,341 5,734,716 5,737,687 5,737,708 5,742,734 D393,856 5,748,104 5,751,725 5,751,761 5,751,901 5,754,533 5,754,542 5,754,733 5,757,767 5,757,858 5,758,266 5,761,204 5,764,687 5,774,496 5,777,990 5,778,024 5,778,338 5,781,543 5,781,856 5,781,867 5,784,406 5,784,532 5,790,589 5,790,632 5,793,338 D397,110 5,799,005 5,799,254 5,802,105 5,805,648 5,805,843 5,812,036 5,812,094 5,812,097 5,812,538 5,812,607 5,812,651 5,812,938 5,818,871 5,822,318 5,825,253 5,828,348 5,828,661 5,835,065 5,835,847 5,839,052 5,841,806 5,842,124 5,844,784 5,844,885 5,844,899 5,844,985 5,848,063 5,848,099 5,850,612 5,852,421 5,854,565 5,854,786 5,857,147 5,859,612 5,859,838 5,859,840 5,861,844 5,862,471 5,862,474 5,864,760 5,864,763 5,867,527 5,867,763 5,870,427 5,870,431 5,870,674 5,872,481 5,872,774 5,872,775 5,872,823 5,877,942 5,878,036 5,870,631 5,881,053 5,881,368 5,884,157 5,884,193 5,884,196 5,892,178 5,892,758 5,892,774 5,892,816 5,892,916 5,893,035 D407,701 5,898,920 5,903,554 5,903,862 D409,561 5,907,167 5,909,434 5,910,752 5,911,128 5,912,882 D410,893 5,914,950 5,915,235 5,917,708 5,917,811 5,917,812 5,917,837 5,920,284 D411,823 5,923,650 5,923,705 5,926,143 5,926,470 5,926,500 5,926,786 5,930,230 5,930,692 Other patents pending. The Kyocera Wireless Corp. ("KWC") products described in this manual may include copyrighted KWC and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for KWC and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the KWC products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law. Furthermore, the purchase of the KWC products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of KWC or any third party software provider, except for the normal, non-exclusive royalty- free license to use that arises by operation of law in the sale of a product. Kyocera is a registered trademark of Kyocera Corporation. Brick Attack, Doodler, Mask, and Rave are trademarks of Kyocera Wireless Corp. BREW is a trademark and QUALCOMM is a registered trademark of QUALCOMM Incorporated. Tetris is a registered trademark of Elorg Company LLC. Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. All other trademarks are the property of their respective owners. Copyright © 2004 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2002 Kyocera Wireless Corp. 82-M8581-1EN, Rev 001 FCC/IC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Wireless Corp. (KWC) supplied and approved; Phone Case Model: TXLCC10042B Belt Clip Model: TXLCC10047B Sport Clip Model: TXLCC10045B. Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 22.5 mm separation distance including the antenna and the user’s body. THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough …

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-K493 Kyocera Wireless Corp.Page 1 of 1 July 1, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application for Cellular and PCS Transceiver Certification To Whom It May Concern: Kyocera Wireless Corporation (KWC) herein submits the Application for Equipment Authorization (FCC Form 731) and Exhibits for Certification of a Cellular & PCS Transceiver, FCC ID: OVFKWC-K493. Applicant: Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121-1522 Manufacture: Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121 The equipment is for mobile station PCS system use. The OVFKWC-K493 is in full compliance with all parts of EIA/TIA/IS-98-B&D Mobile Station-Land Station Compatibility Specification, issue July 2000 and March 2001, and also in full compliance with all parts of ANSI J-STD-018, Recommended Minimum Performance Requirements for 1.8 to 2 GHz Code Division Multiple Access (CDMA) Personal Stations, issue July 1996. Model Numbers containing the letter “L” in the suffix have GPS capability. Information concerning how the ESN protection requirements are met is provided in Exhibit 10. Please contact me at Tel: (858) 882-1552 or Email: mailto:[email protected] if there are any questions or if any additional information is needed. Kyocera Wireless Corporation Patrick Bowen Staff Engineer

FCC ID: OVFKWC-K493 Kyocera Wireless Corp.Page 1 of 1 July 1, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request of Confidentiality for FCC ID: OVFKWC-K493 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Kyocera Wireless Corp hereby requests confidential treatment of information accompanying this Application as outlined below: ExhibitDescription 1Operation Descriptions 2Block diagrams 3Schematics 4Parts Lists The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Patrick Bowen Staff Engineer

FCC ID: OVFKWC-K493 Kyocera Wireless Corp.Page 1 of 10 July 15, 2004 Re: Application review, FCC ID: OVFKWC-K493 To David Chernomordik: Thank you for your feedback on the FCC application that I have submitted. Please find my responses to your questions below. Question: 1) Exhibit 10, EMC report a) Are the conducted power and EIRP (section 6.1 and 6.2) the average values measured as a channel power in 1.25 MHz bandwidth? What Gigatronics power meter used for? Was the EIRP measurement performed by the substitution method. Please clarify. Response: The test method for the conducted power was as follows: • The antenna connector of the phone was connected to the Giga-Tronics Power Meter Sensor (model 80601A) with Giga-tronics Power Meter (model 8541C) for the conducted power measurement. The HP 8594E Spectrum Analyzer was, also, connected via a RF coupler as a visual reference to ensure that the phone was transmitting at the desired band and channel. • The phone was set to transmit at the desired mode, band, and channel. • The power meter was configured with the correct sensor detector settings and offset values. • The RF Output Power was measured (dBm) and recorded. The radiated power measurements were performed in a fully anechoic chamber. Please see section "6.2 Radiated Power" of Exhibit 10 for the measurement procedure. FCC ID: OVFKWC-K493 Kyocera Wireless Corp.Page 2 of 10 Question: b) There are not clear indication that the antenna conducted emissions complies with FCC 24.238 requirements. According to that rule, measurements at frequencies 1849-1850 MHz and 1910-1911 MHz may be performed with a spectrum analyzer RBW> = 1% of the signal bandwidth, but at 1849 MHz and below, and at 1911 MHz and above, measurement must be performed with RBW=1 MHz. It is not clear from Figures 9-1a and 9-3a that the device meets the requirement at 1849 MHz and 1911 MHz. Please clarify. Response: Figures 9-1a and 9-3a are used to illustrate the conducted emissions for the regions <1849 MHz and >1911 MHz. They were measured using a RBW=1 MHz. For the frequency ranges between 1849-1850 MHz and between 1910-1911 MHz please see Figures 8.3 and 8.4. They are the plots of the upper and lower band edges. The measurements were performed with using the Adjacent Channel Power Ratio (ACPR) method. The trace of the signal shown in the figures was taken using a RBW=30 kHz (which is > 1%). I have included in this response the same figures 8.3 and 8.4 from the test report modified with the -13 dBm limit (see below). FCC ID: OVFKWC-K493 Kyocera Wireless Corp.Page 3 of 10 Figure 8-3 CDMA 1900 Lower Band Edge Figure 8-4 CDMA 1900 Upper Band Edge Center Frequency = 1851.25 MHz Span = 3 MHz Frequency Scale = 300 kHz/Div 1850 MHz ≈ CF - 3 divisions Limit Line = -13 dBm Center Frequency = 1908.75 MHz Span = 3 MHz Frequency Scale = 300 kHz/Div 1911 MHz ≈ CF + 3 divisions Limit Line = -13 dBm FCC ID: OVFKWC-K493 Kyocera Wireless Corp.Page 4 of 10 Question: 2) Exhibit 9, SAR report a) For body-worn configuration, the phones were tested in a position where the back of the phone is facing the phantom. I agree with this test configuration for the phone with the belt clip TXLCC10048B, but it is not obvious that the phone with Sport Clip TXLCC10045B may not be used in a reverse position, as the phone may hang somewhere. Please clarify. If reverse position is available, submit additional data. Response: The sport clip accessory is not to be used as a body-worn accessory by itself. It is intended and marketed as follows: "Sport clip attaches your phone to a backpack or purse for easy, effortless access. Doubles as a stand for your phone. *Sport clip is not designed to be a body-worn accessory". The sport clip may be used with other approved body-worn accessories (phone case or belt clip). When used with the other body-accessories, the phone can only be positioned with the back facing the phantom. Question: b) I could not locate Probe calibration for body (ConvF(5, 5, 5). On the SAR graphs for body, it is written "Probe not calibrated". Please explain. Response: The probe in question, serial number 1772, was last calibrated on 10-10-2003. Previous to 10-10-2003 the probe was calibrated for both head and body. The probe vendor was contacted and it was found that when the probe was re-calibrated on 10-10-2003, only head calibration was performed. Therefore, the calibration certificate date for body testing using probe 1712 has expired. The body testing that occurred used the calibration factors that were valid up to 10-10-2003. The SAR values that were tested using probe 1712 were verified to be valid by re-testing the worse-case positions using another probe, serial number 1663, which has valid calibration for both head and body. The re- test data taken with probe 1663 on 7/14/2004 was found to be equivalent with the original reported data that was taken with probe 1712 on 6/12/2004 and 6/13/2004. The SAR results were within 0.035 mW/g of the original values. Please see Appendix A of this correspondence for the 7/14/2004 validation plot and the re-test data of the worse case position plots. Question: In addition, please comment the low level of the validation SAR (3.81 mW/g) on 6/2/04 which is 19.7% lower than SPEAG reference level (page 11 of the SAR report) - FCC requirement is 10% max. Response: The system validation data from 6/2/2004 data was checked. The liquid parameters have been found to be correct for that day. It appears that the positioning of the dipole under the phantom must have been slightly incorrect when performing the validation test. If the positioning of the dipole is not correct, then the validation SAR values that are measured may become out of tolerance. The SAR data for the phones tested 6/2/2004 was verified and found to be correct by re-testing the worse-case position again on 7/15/2004. The delta of the worse-case SAR results were within the 10.32% combined standard uncertainty of each other. Please see Appendix…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-K493 Exhibit 7 - OVFKWC-K493 External Photos.docPage 1 of 3 Exhibit 7: OVFKWC-K493 External Photos K490 Family – Energi Product Description The phones OVFKWC-K493 are PCS 1XRTT products. Models that contain the letter “L” have integrated Assisted GPS software feature enabled to meet the emergency location requirements of the FCC’s E911 Phase II mandate. The PCS architecture is defined as 1900MHz (PCS CDMA). All models included in the OVFKWC-K493 filing use the same antenna and have identical PCB layouts in regards to the RF Circuitry, Basic Frequency Determining and Stabilization Circuitry, Basic Modulator Circuit, Transmitter Active Devices, and Tuning Targets. The only differences between models are the choice of color or greyscale LCD, and the software applications supported (GPS, Brew, WAP, etc.). See product matrix in Figure 1 below. The phone is designed in compliance with the technical specifications for compatibility of mobile and base stations in the Cellular Radio telephone service contained in “Cellular System Mobile Station - Land Station Compatibility Specification” as specified in OET Bulletin 53 and TIA Standards The phone will support certain CDMA2000 radio-configurations (RC) as describes in Exhibit 1 (operation description). En e r g i K490 N o n - BREW / BREW KWC PC S/ G PS/ G re ysc a leK493L KWC PC S / no G PS/ G re ysc a leK493N KWC PC S/ G PS/ C o lo rK493LC / K493XLC KWC PC S/ no G PS/ C o lo rK493NC / K493XNC KWC PC S / G PS/ WAP 2.0K493M C / K493XM C Figure 1 OVFKWC-K493 Product Matrix FCC ID: OVFKWC-K493 Exhibit 7 - OVFKWC-K493 External Photos.docPage 2 of 3 K490 (Energi) Family Front K490 (Energi) Family Energi Back FCC ID: OVFKWC-K493 Exhibit 7 - OVFKWC-K493 External Photos.docPage 3 of 3 K490 (Energi) Family Energi Sides

FCC ID: OVFKWC-K493 Exhibit 6 - OVFKWC-K493 Label Information.docPage 1 of 3 Exhibit 6: OVFKWC-K493 ID Label K490 (Energi) Family Product Description The phones OVFKWC-K493 are PCS 1XRTT products. Models that contain the letter “L” have integrated Assisted GPS software feature enabled to meet the emergency location requirements of the FCC’s E911 Phase II mandate. The PCS architecture is defined as 1900MHz (PCS CDMA). All models included in the OVFKWC-K493 filing use the same antenna and have identical PCB layouts in regards to the RF Circuitry, Basic Frequency Determining and Stabilization Circuitry, Basic Modulator Circuit, Transmitter Active Devices, and Tuning Targets. The only differences between models are the mechanical design of each model family’s front housings, choice of color or greyscale LCD, and software applications supported (GPS, Brew, WAP, etc.). See product matrix in Figure 1 below. The phone is designed in compliance with the technical specifications for compatibility of mobile and base stations in the Cellular Radio telephone service contained in “Cellular System Mobile Station -Land Station Compatibility Specification” as specified in OET Bulletin 53 and TIA Standards The phone will support certain CDMA2000 radio-configurations (RC) as describes in Exhibit 1 (operation description). En e r g i K490 N o n - BREW / BREW KWC PC S/ G PS/ G re ysc a leK493L KWC PC S / no G PS/ G re ysc a leK493N KWC PC S/ G PS/ C o lo rK493LC / K493XLC KWC PC S/ no G PS/ C o lo rK493NC / K493XNC KWC PC S / G PS/ WAP 2.0K493M C / K493XM C Figure 1 OVFKWC-K493 Product Matrix FCC ID: OVFKWC-K493 Exhibit 6 - OVFKWC-K493 Label Information.docPage 2 of 3 Label Format Label Location FCC ID: OVFKWC-K493 Scale: 2/1

FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 1 of 3 Exhibit 8: OVFKWC-K493 Internal Photos K490 (Enegi) Family PRODUCT DESCRIPTION..........................................................................................................................................2 MECHANICAL HOUSING - K490 (ENERGI) FAMILY ...........................................................................................3 I NSIDE FRONT AND REAR HOUSING.........................................................................................................................3 I NSIDE FRONT HOUSING...........................................................................................................................................4 K EYPAD.....................................................................................................................................................................5 PCB SIDE 1 - K490 (ENEGI) FAMILY.......................................................................................................................6 PCB S IDE 1 ...............................................................................................................................................................6 PCB S IDE 1 (WITH SHIELD CANS)............................................................................................................................7 PCB S IDE 1 (SHIELD CANS REMOVED) ...................................................................................................................8 PCB SIDE 2 –K490 (ENEGI) FAMILY .......................................................................................................................9 PCB S IDE 2 (WITH SHIELD CANS)............................................................................................................................9 PCB S IDE 2 (WITH SHIELD CANS REMOVED) ........................................................................................................10 FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 2 of 3 Product Description The phones OVFKWC-K493 are PCS 1XRTT products. Models that contain the letter “L” have integrated Assisted GPS software feature enabled to meet the emergency location requirements of the FCC’s E911 Phase II mandate. The PCS architecture is defined as 1900MHz (PCS CDMA). All models included in the OVFKWC-K493 filing use the same antenna and have identical PCB layouts in regards to the RF Circuitry, Basic Frequency Determining and Stabilization Circuitry, Basic Modulator Circuit, Transmitter Active Devices, and Tuning Targets. The only differences between models are the mechanical design of each model family’s front housings, choice of color or greyscale LCD, and software applications supported (GPS, Brew, WAP, etc.). See product matrix in Figure 1 below. The phone is designed in compliance with the technical specifications for compatibility of mobile and base stations in the Cellular Radio telephone service contained in “Cellular System Mobile Station -Land Station Compatibility Specification” as specified in OET Bulletin 53 and TIA Standards The phone will support certain CDMA2000 radio-configurations (RC) as describes in Exhibit 1 (operation description). En e r g i K490 N o n - BREW / BREW KWC PC S/ G PS/ G re y sc a leK493L KWC PC S / n o G PS/ G re y sc a leK493N KWC PC S/ G PS/ C o lo rK493LC / K493XLC KWC PC S/ no G PS/ C o lo rK493NC / K493XNC KWC PC S / G PS/ WA P 2.0K493M C / K493XM C Figure 1 OVFKWC-K493 Product Matrix FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 3 of 3 Mechanical Housing - K490 (Energi) Family Gray LCD VariantColor LCD Variant Inside Front and Rear Housing K490 (Energi) Family FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 4 of 3 Gray LCD VariantColor LCD Variant Inside Front Housing K490 (Energi) Family FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 5 of 3 Keypad K490 (Energi) Family FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 6 of 3 PCB Side 1 - K490 (Enegi) Family Gray LCD VariantColor LCD Variant PCB Side 1 K490 (Enegi) Family FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 7 of 3 Gray LCD VariantColor LCD Variant PCB Side 1 (with Shield Cans) K490 (Enegi) Family FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 8 of 3 Gray LCD VariantColor LCD Variant PCB Side 1 (Shield Cans Removed) K490 (Enegi) Family FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 9 of 3 PCB Side 2 –K490 (Enegi) Family PCB Side 2 is the same for both gray and color LCD model variants PCB Side 2 (with Shield Cans) K490 (Enegi) Family FCC ID: OVFKWC-K493 Exhibit 8 - OVFKWC-K493 Internal Photos.docPage 10 of 3 PCB Side 2 is the same for both gray and color LCD model variants PCB Side 2 (with Shield Cans removed) K490 (Enegi) Family

FCC ID:OVFKWC-K493 SAR Test Report On PCS CDMA Cellular Phone FCC Part 24 Certification FCC ID: OVFKWC-K493 Model: K490 Family STATEMENT OF COMPLIANCE Kyocera Wireless Corp declares under its sole responsibility that the product, FCC ID: OVFKWC- K493 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted: NONE. Date of Test:June 1, 2004 – June 13, 2004 Test performed by:Kyocera Wireless Corp 10300 Campus Point Drive CA 92121 Report Prepared by:Patrick Bowen, Staff Engineer Report Reviewed by:C. K. Li, Engineer, Senior Staff/Manager FCC ID:OVFKWC-K493 Table of Contents 1INTRODUCTION..................................................................................................................................................3 2EQUIPMENT UNDER TEST (EUT) .....................................................................................................................3 3ACCESSORIES: ..................................................................................................................................................5 4SAR TEST RESULT SUMMARY........................................................................................................................6 4.1 M AXIMUM RESULTS FOUND DURING SAR EVALUATION........................................................................................6 4.2 H EAD CONFIGURATION.......................................................................................................................................6 4.3 B ODY WORN CONFIGURATION (WITH KWC BODY WORN ACCESSORIES)................................................................6 4.4 M EASUREMENT UNCERTAINTY............................................................................................................................6 5TEST CONDITIONS ............................................................................................................................................7 5.1 A MBIENT CONDITIONS........................................................................................................................................7 5.2 RF CHARACTERISTICS OF THE TEST SITE.............................................................................................................7 5.3 T EST SIGNAL, FREQUENCIES AND OUTPUT POWER..............................................................................................7 5.4 D EVICE TEST CONDITIONS..................................................................................................................................7 6DESCRIPTION OF THE TEST EQUIPMENT......................................................................................................8 6.1 D OSIMETRIC SYSTEM.........................................................................................................................................8 6.2 A DDITIONAL EQUIPMENT NEEDED IN VALIDATION...................................................................................................8 6.3 T ISSUE STIMULANTS...........................................................................................................................................9 6.4 P HANTOMS DESCRIPTION...................................................................................................................................9 6.5 I SOTROPIC E-FIELD PROBE...............................................................................................................................10 7SYSTEM VALIDATION .....................................................................................................................................11 8DESCRIPTION OF THE TEST PROCEDURE ..................................................................................................12 8.1 T EST POSITIONS..............................................................................................................................................12 8.1.1Initial Ear Position .................................................................................................................................12 8.1.2Cheek Position ......................................................................................................................................13 8.1.3Tilt Position............................................................................................................................................13 8.1.3Body Worn Configuration ......................................................................................................................14 8.2 S CAN PROCEDURES.........................................................................................................................................14 8.3 SAR A VERAGING METHODS.............................................................................................................................14 9MEASUREMENT UNCERTAINTY ....................................................................................................................15 10TEST DATA .......................................................................................................................................................16 10.1H EAD SAR TEST RESULTS..........................................................................................................................16 10.2B ODY WORN SAR TEST RESULT..................................................................................................................17 11TEST SETUP PHOTOS .....................................................................................................................................18 APPENDIX A: VALIDATION TEST PRINTOUT ........…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-K493 Page 1 of 13 Appendix B-1 K490 Family - PCS Gray Energi For FCC ID: OVFKWC-K493 FCC ID: OVFKWC-K493 Page 2 of 13 Section 1 CDMA 1900 FCC ID: OVFKWC-K493 Page 3 of 13 FCC ID: OVFKWC-K493 Page 4 of 13 FCC ID: OVFKWC-K493 Page 5 of 13 FCC ID: OVFKWC-K493 Page 6 of 13 FCC ID: OVFKWC-K493 Page 7 of 13 FCC ID: OVFKWC-K493 Page 8 of 13 FCC ID: OVFKWC-K493 Page 9 of 13 FCC ID: OVFKWC-K493 Page 10 of 13 FCC ID: OVFKWC-K493 Page 11 of 13 FCC ID: OVFKWC-K493 Page 12 of 13 FCC ID: OVFKWC-K493 Page 13 of 13

FCC ID: OVFKWC-K493 Page 1 of 14 Appendix B-2 K490 Family - PCS Color Energi For FCC ID: OVFKWC-K493 FCC ID: OVFKWC-K493 Page 2 of 14 Section 1 CDMA 1900 FCC ID: OVFKWC-K493 Page 3 of 14 FCC ID: OVFKWC-K493 Page 4 of 14 FCC ID: OVFKWC-K493 Page 5 of 14 FCC ID: OVFKWC-K493 Page 6 of 14 FCC ID: OVFKWC-K493 Page 7 of 14 FCC ID: OVFKWC-K493 Page 8 of 14 FCC ID: OVFKWC-K493 Page 9 of 14 FCC ID: OVFKWC-K493 Page 10 of 14 FCC ID: OVFKWC-K493 Page 11 of 14 FCC ID: OVFKWC-K493 Page 12 of 14 FCC ID: OVFKWC-K493 Page 13 of 14 FCC ID: OVFKWC-K493 Page 14 of 14

FCC ID: OVFKWC-K493…

Text truncated - open the document above for the full version.