OVFKWC-K4X4Dual Band Trimode CDMA/AMPS Cellular Phone

User Guide for Kyocera Aktiv qj Phones This manual is based on the production version of the Kyocera K483XLC, K484NC, K484LC, and K484XNC phones. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents: 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 5,193,094 5,228,054 5,257,283 5,265,119 5,267,261 5,267,262 5,280,472 5,283,536 5,289,527 5,307,405 5,309,474 5,337,338 5,339,046 5,341,456 5,383,219 5,392,287 5,396,516 D356,560 5,408,697 5,414,728 5,414,796 5,416,797 5,426,392 5,437,055 D361,065 5,442,322 5,442,627 5,452,473 5,461,639 5,469,115 5,469,471 5,471,497 5,475,870 5,479,475 5,483,696 5,485,486 5,487,175 5,490,165 5,497,395 5,499,280 5,504,773 5,506,865 5,509,015 5,509,035 5,511,067 5,511,073 5,513,176 5,515,177 5,517,323 5,519,761 5,528,593 5,530,928 5,533,011 5,535,239 5,539,531 5,544,196 5,544,223 5,546,459 5,548,812 5,559,881 5,559,865 5,561,618 5,564,083 5,566,000 5,566,206 5,566,357 5,568,483 5,574,773 5,574,987 D375,740 5,576,662 5,577,022 5,577,265 D375,937 5,588,043 D376,804 5,589,756 5,590,069 5,590,406 5,590,408 5,592,548 5,594,718 5,596,570 5,600,754 5,602,834 5,602,833 5,603,096 5,604,459 5,604,730 5,608,722 5,614,806 5,617,060 5,621,752 5,621,784 5,621,853 5,625,876 5,627,857 5,629,955 5,629,975 5,638,412 5,640,414 5,642,398 5,644,591 5,644,596 5,646,991 5,652,814 5,654,979 5,655,220 5,657,420 5,659,569 5,663,807 5,666,122 5,673,259 5,675,581 5,675,644 5,680,395 5,687,229 D386,186 5,689,557 5,691,974 5,692,006 5,696,468 5,697,055 5,703,902 5,704,001 5,708,448 5,710,521 5,710,758 5,710,768 5,710,784 5,715,236 5,715,526 5,722,044 5,722,053 5,722,061 5,722,063 5,724,385 5,727,123 5,729,540 5,732,134 5,732,341 5,734,716 5,737,687 5,737,708 5,742,734 D393,856 5,748,104 5,751,725 5,751,761 5,751,901 5,754,533 5,754,542 5,754,733 5,757,767 5,757,858 5,758,266 5,761,204 5,764,687 5,774,496 5,777,990 5,778,024 5,778,338 5,781,543 5,781,856 5,781,867 5,784,406 5,784,532 5,790,589 5,790,632 5,793,338 D397,110 5,799,005 5,799,254 5,802,105 5,805,648 5,805,843 5,812,036 5,812,094 5,812,097 5,812,538 5,812,607 5,812,651 5,812,938 5,818,871 5,822,318 5,825,253 5,828,348 5,828,661 5,835,065 5,835,847 5,839,052 5,841,806 5,842,124 5,844,784 5,844,885 5,844,899 5,844,985 5,848,063 5,848,099 5,850,612 5,852,421 5,854,565 5,854,786 5,857,147 5,859,612 5,859,838 5,859,840 5,861,844 5,862,471 5,862,474 5,864,760 5,864,763 5,867,527 5,867,763 5,870,427 5,870,431 5,870,674 5,872,481 5,872,774 5,872,775 5,872,823 5,877,942 5,878,036 5,870,631 5,881,053 5,881,368 5,884,157 5,884,193 5,884,196 5,892,178 5,892,758 5,892,774 5,892,816 5,892,916 5,893,035 D407,701 5,898,920 5,903,554 5,903,862 D409,561 5,907,167 5,909,434 5,910,752 5,911,128 5,912,882 D410,893 5,914,950 5,915,235 5,917,708 5,917,811 5,917,812 5,917,837 5,920,284 D411,823 5,923,650 5,923,705 5,926,143 5,926,470 5,926,500 5,926,786 5,930,230 5,930,692 Other patents pending. The Kyocera Wireless Corp. ("KWC") products described in this manual may include copyrighted KWC and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for KWC and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the KWC products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law. Furthermore, the purchase of the KWC products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of KWC or any third party software provider, except for the normal, non-exclusive royalty- free license to use that arises by operation of law in the sale of a product. Kyocera is a registered trademark of Kyocera Corporation. Brick Attack, Doodler, Mask, and Aktiv are trademarks of Kyocera Wireless Corp. BREW is a trademark and QUALCOMM is a registered trademark of QUALCOMM Incorporated. Tetris is a registered trademark of Elorg Company LLC. Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. All other trademarks are the property of their respective owners. Copyright © 2004 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2002 Kyocera Wireless Corp. 82-M8553-1EN, Rev 001 FCC/IC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Wireless Corp. (KWC) supplied and approved; Phone Case Model: TXLCC10042B Belt Clip Model: TXLCC10047B Sport Clip Model: TXLCC10045B. Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 22.5 mm separation distance including the antenna and the user’s body. THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-K4X4 Kyocera Wireless Corp.Page 1 of 1 June 30, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application for Cellular and PCS Transceiver Certification To Whom It May Concern: Kyocera Wireless Corporation (KWC) herein submits the Application for Equipment Authorization (FCC Form 731) and Exhibits for Certification of a Cellular & PCS Transceiver, FCC ID: OVFKWC-K4X4. Applicant: Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121-1522 Manufacture: Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121 The equipment is for mobile station cellular and PCS system use. The OVFKWC-K4X4 is in full compliance with all parts of EIA/TIA/IS-98-B&D Mobile Station-Land Station Compatibility Specification, issue July 2000 and March 2001, and also in full compliance with all parts of ANSI J-STD-018, Recommended Minimum Performance Requirements for 1.8 to 2 GHz Code Division Multiple Access (CDMA) Personal Stations, issue July 1996. Model Numbers containing the letter “L” in the suffix have GPS capability. Information concerning how the ESN protection requirements are met is provided in Exhibit 10. Please contact me at Tel: (858) 882-1552 or Email: mailto:[email protected] if there are any questions or if any additional information is needed. Kyocera Wireless Corporation Patrick Bowen Staff Engineer

FCC ID: OVFKWC-K4X4 Kyocera Wireless Corp.Page 1 of 1 June 30, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request of Confidentiality for FCC ID: OVFKWC-K4X4 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Kyocera Wireless Corp hereby requests confidential treatment of information accompanying this Application as outlined below: ExhibitDescription 1Operation Descriptions 2Block diagrams 3Schematics 4Parts Lists The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Patrick Bowen Senior Engineer

FCC ID: OVFKWC-K4X4 Kyocera Wireless Corp.Page 1 of 7 July 23, 2004 Re: Kyocera Wireless FCC ID: OVFKWC-K4X4 To Roland Gubisch: Thank you for your feedback on the FCC application that I have submitted. Please find my responses to your questions below. EMC REPORTS: Question: 1. Question - the method of ERP/EIRP measurement documented in the test report appears to be different from that in TIA-603. Please provide an equation which relates the power meter reading to EUT ERP/EIRP, and/or describe the computation. Response: The ERP/EIRP measurements were measured using a power meter while testing the phones in a calibrated fully anechoic chamber. No equations were used in relating the power meter reading to the EUT ERP/EIRP maximum RF output power result. Question: 2. Comment - The test setup photos in the Part 22/24 transmitter and 15B receiver spurious emission reports do not show any accessories attached. If the handset can be used with a headset or earbud, it should be tested with a typical accessory attached. Response: The Part 22/24 transmitter and receiver LO spurious reports included in this filing are the test results that test the phone only. The phone with accessories is tested for part 15B in a separate certification test effort. FCC ID: OVFKWC-K4X4 Kyocera Wireless Corp.Page 2 of 7 SAR REPORTS: Question: 1. Question - Please provide probe #1712 calibration factors for body tissue dielectric, or indicate where the information is located. Response: The probe in question, serial number 1772, was last calibrated on 10-10-2003. Previous to 10-10-2003 the probe was calibrated for both head and body. The probe vendor was contacted and it was found that when the probe was re-calibrated on 10-10-2003, only head calibration was performed. Therefore, the calibration certificate date for body testing using probe 1712 has expired. The body testing that occurred used the calibration factors that were valid up to 10-10-2003. The SAR values that were tested using probe 1712 were verified to be valid by re-testing the worse-case positions using another probe, serial number 1663, which has valid calibration for both head and body. The re- test data taken with probe 1663 on 7/14/2004 was found to be equivalent with the original reported data that was taken with probe 1712. The SAR results were within 0.065 mW/g of the original values. Please see Appendix A of this correspondence for the 7/14/2004 validation plot and the re-test data of the worse case position plots. Question: 2. Question - The system validation plots use a #1712 head tissue 1800 MHz probe factor of 5.4. However, the probe calibration factor supplied by the manufacturer is 5.3 Please explain. Response: The system validation data was checked. The liquid parameters have been found to be correct for each day. However, It appears that while performing the system validation, the test system was configured with incorrect probe parameters. The SAR data was verified and found to be correct by re-testing the worse-case position again on 7/22/2004. The delta of the worse-case SAR results were within the allowable measurement standard. Please see Appendix B of this correspondence for the 7/22/2004 validation plot and the re-test data of the worse-case position plot. Question: 3. Question - Liquid depth in the flat phantom should be 15mm. I do not find any reference to this in the test report. Please comment, or indicate where the information is located. Response: The minimum 15cm depth of the liquid is verified by the test operator when preparing the SAM phantom for testing. A measurement device with markings at 15cm is used to ensure that phantom is filled with the proper amount of liquid prior to performing the validation and SAR measurements. In addition, the z-axis scans are performed on the worse case SAR measurements to verify adequate liquid depth. The reference to the 15cm depth of the liquid in the phantom can be found in section "6.3 Tissue Stimulants" of the test report. FCC ID: OVFKWC-K4X4 Kyocera Wireless Corp.Page 3 of 7 Question: 4. Question - The SAR plots using the #1712 probe contain the comment "probe not calibrated." Please explain. Response: This is the same issue as discussed in Question 1. All worse case data and validation data that exhibit the "probe not calibrated" was re-tested and the results were verified to be within the allowable measurement uncertainty. See Appendix A and B of this correspondence for the retest validation plots and the worse-case plots. Question: 5. Comment - the EUT is shown tested with an accessory attached, but the accessory is not identified. Response: All Kyocera Wireless accessories that have been tested and are approved for use with the models listed in this filing are described in section "3 Accessories" of the SAR report. Section "11 Test Setup Photos" is used to show how the phones with the accessories were placed near the phantom during the tests. Question: 6. Comment - Report references to IEEE 1528-200X should be replaced by IEEE 1528-2003. Response: Agreed. The references to IEEE 1528-200X will be replaced by IEEE 1528-2003 in future test reports. Both IEEE 1528-200X and IEEE 1528-2003 are considered equivalent. Question: 7. Comment - Both the system validation and measurement plots are very small, and details are obscured by bars across the scan field. Scan details should be visible. Response: The plots in the SAR report and Appendixes are the maximum size that will fit on a single 8.5" x 11" page. The bars on the plots illustrate the cube that was tested. I hope the responses I have submitted answered all your concerns regarding filing OVFKWC-K4X4. Please contact me at Tel: (858) 882-1552 or Email: mailto:[email protected] if there are any questions or if any additional information is needed. Kyocera Wireless Corporation Patrick Bowen Staff Engineer FCC ID: OVFKWC-K4X4 Kyocera Wireless Corp.Page 4 of 7 Appendix A FCC ID: OVFKWC-K4X4 Kyocera Wireless Corp.Page 5 of 7 FCC…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-K4X4 Exhibit 7 - OVFKWC-K4X4 External Photos.docPage 1 of 3 Exhibit 7: OVFKWC-K4X4 External Photos K404A (Rave), K430 (Rave) Family, K450 (Phantom) Family, K480 (Aktiv) Family, and K490 (Energi) Family Product Description The phones OVFKWC-K4X4 are Tri-mode Dual-Band 1XRTT products. Models that contain the letter “L” have integrated Assisted GPS software feature enabled to meet the emergency location requirements of the FCC’s E911 Phase II mandate. The Tri-mode architecture is defined as 1900MHz (PCS CDMA), 800MHz (cellular CDMA and AMPS). All models included in the OVFKWC-K4X4 filing use the same antenna and have identical PCB layouts in regards to the RF Circuitry, Basic Frequency Determining and Stabilization Circuitry, Basic Modulator Circuit, Transmitter Active Devices, and Tuning Targets. The only differences between models are the mechanical design of each model family’s front housings, choice of color or greyscale LCD, and software applications supported (GPS, Brew, WAP, etc.). See product matrix in Figure 1 below. The phone is designed in compliance with the technical specifications for compatibility of mobile and base stations in the Cellular Radio telephone service contained in “Cellular System Mobile Station - Land Station Compatibility Specification” as specified in OET Bulletin 53 and TIA Standards The phone will support certain CDMA2000 radio-configurations (RC) as describes in Exhibit 1 (operation description). Phantom RaveRaveAktivEnergi K450K404K430K480K490 Non-BREW / BREWNon-BREW / BREWNon-BREW / BREWNon-BREW / BREW KWC Trimode/GPS/GreyscaleK454LK434LK484L KWC Trimode/no GPS/Greyscale K454NK434NK484N KWC Trimode/GPS/ColorK454LC / K454XLCK404AK434LC / K434XLCK484LC / K484XLCK494LC / K494XLC KWC Trimode/no GPS/ColorK454NC / K454XNCK434NC / K434XNCK484NC / K484XNCK494NC / K494XNC KWC Trimode/GPS/WAP 2.0K454MC / K454XMCK434MC / K434XMCK484MC / K484XMCK494MC / K494XMC Figure 1 OVFKWC-K4X4 Product Matrix FCC ID: OVFKWC-K4X4 Exhibit 7 - OVFKWC-K4X4 External Photos.docPage 2 of 3 K404A and K430 (Rave) Family Front K404A and K430 (Rave) Family Back FCC ID: OVFKWC-K4X4 Exhibit 7 - OVFKWC-K4X4 External Photos.docPage 3 of 3 K404A and K430 (Rave) Family Sides FCC ID: OVFKWC-K4X4 Exhibit 7 - OVFKWC-K4X4 External Photos.docPage 4 of 3 K450 (Phantom) Family Front K450 (Phantom) Family Back FCC ID: OVFKWC-K4X4 Exhibit 7 - OVFKWC-K4X4 External Photos.docPage 5 of 3 K450 (Phantom) Family Sides FCC ID: OVFKWC-K4X4 Exhibit 7 - OVFKWC-K4X4 External Photos.docPage 6 of 3 K480 (Aktiv) Family Front K480 (Aktiv) Family Back FCC ID: OVFKWC-K4X4 Exhibit 7 - OVFKWC-K4X4 External Photos.docPage 7 of 3 K480 (Aktiv) Family Sides FCC ID: OVFKWC-K4X4 Exhibit 7 - OVFKWC-K4X4 External Photos.docPage 8 of 3 K490 (Energi) Family Front K490 (Energi) Family Back FCC ID: OVFKWC-K4X4 Exhibit 7 - OVFKWC-K4X4 External Photos.docPage 9 of 3 K490 (Energi) Family Sides

FCC ID: OVFKWC-K4X4 Exhibit 6 - OVFKWC-K4X4 Label Information.docPage 1 of 3 Exhibit 6: OVFKWC-K4X4 ID Label K404A (Rave), K430 (Rave) Family, K450 (Phantom) Family, K480 (Aktiv) Family, and K490 (Energi) Family Product Description The phones OVFKWC-K4X4 are Tri-mode Dual-Band 1XRTT products. Models that contain the letter “L” have integrated Assisted GPS software feature enabled to meet the emergency location requirements of the FCC’s E911 Phase II mandate. The Tri- mode architecture is defined as 1900MHz (PCS CDMA), 800MHz (cellular CDMA and AMPS). All models included in the OVFKWC-K4X4 filing use the same antenna and have identical PCB layouts in regards to the RF Circuitry, Basic Frequency Determining and Stabilization Circuitry, Basic Modulator Circuit, Transmitter Active Devices, and Tuning Targets. The only differences between models are the mechanical design of each model family’s front housings, choice of color or greyscale LCD, and software applications supported (GPS, Brew, WAP, etc.). See product matrix in Figure 1 below. The phone is designed in compliance with the technical specifications for compatibility of mobile and base stations in the Cellular Radio telephone service contained in “Cellular System Mobile Station -Land Station Compatibility Specification” as specified in OET Bulletin 53 and TIA Standards The phone will support certain CDMA2000 radio-configurations (RC) as describes in Exhibit 1 (operation description). Phantom RaveRaveAk tivEne rgi K450K404K430K480K490 No n - BREW / BREWNo n - BREW / BREWNo n - BREW / BREWNo n - BREW / BREW KWC Trimode/GPS/GreyscaleK454LK434LK484L KWC Trimode/no GPS/Greyscale K454NK434NK484N KWC Trimode/GPS/ColorK454LC / K454XLCK404AK434LC / K434XLCK484LC / K484XLCK494LC / K494XLC KWC Trimode/no GPS/ColorK454NC / K454XNCK434NC / K434XNCK484NC / K484XNCK494NC / K494XNC KWC Trimode/GPS/WAP 2.0K454MC / K454XMCK434MC / K434XMCK484MC / K484XMCK494MC / K494XMC Figure 1 OVFKWC-K4X4 Product Matrix FCC ID: OVFKWC-K4X4 Exhibit 6 - OVFKWC-K4X4 Label Information.docPage 2 of 3 Label Format Label Location FCC ID: OVFKWC-K4X4 IC: 3572A-K4X4 Scale: 2/1

FCC ID: OVFKWC-K4X4 Exhibit 8 - OVFKWC-K4X4 Internal Photos.docPage 1 of 3 Exhibit 8: OVFKWC-K4X4 Internal Photos K404A (Rave), K430 (Rave) Family, K450 (Phantom) Family, K480 (Aktiv) Family, and K490 (Energi) Family PRODUCT DESCRIPTION..........................................................................................................................................2 MECHANICAL HOUSING - K404A (RAVE), K430 (RAVE) FAMILY, K480 (AKTIV) FAMILY........................3 I NSIDE FRONT AND REAR HOUSING.........................................................................................................................3 I NSIDE FRONT HOUSING...........................................................................................................................................4 K EYPAD.....................................................................................................................................................................5 MECHANICAL HOUSING - K450 (PHANTOM) FAMILY ......................................................................................6 I NSIDE FRONT AND REAR HOUSING.........................................................................................................................6 I NSIDE FRONT HOUSING...........................................................................................................................................7 K EYPAD.....................................................................................................................................................................8 MECHANICAL HOUSING - K490 (ENERGI) FAMILY ...........................................................................................9 I NSIDE FRONT AND REAR HOUSING.........................................................................................................................9 I NSIDE FRONT HOUSING.........................................................................................................................................10 K EYPAD...................................................................................................................................................................11 PCB SIDE 1 - K404A (RAVE), K430 (RAVE) FAMILY, K480 (AKTIV) FAMILY, AND K490 (ENERGI) FAMILY......................................................................................................................................................................12 PCB S IDE 1 .............................................................................................................................................................12 PCB S IDE 1 (WITH SHIELD CANS)..........................................................................................................................13 PCB S IDE 1 (SHIELD CANS REMOVED) .................................................................................................................14 PCB SIDE 1 - K450 (PHANTOM) FAMILY .............................................................................................................15 PCB S IDE 1 .............................................................................................................................................................15 PCB S IDE 1 (WITH SHIELD CANS)..........................................................................................................................16 PCB S IDE 1 (SHIELD CANS REMOVED) .................................................................................................................17 PCB SIDE 2 – K404A (RAVE), K430 (RAVE) FAMILY, K450 (PHANTOM) FAMILY, K480 (AKTIV) FAMILY, AND K490 (ENERGI) FAMILY ...............................................................................................................18 PCB S IDE 2 (WITH SHIELD CANS)..........................................................................................................................18 PCB S IDE 2 (WITH SHIELD CANS REMOVED) ........................................................................................................19 FCC ID: OVFKWC-K4X4 Exhibit 8 - OVFKWC-K4X4 Internal Photos.docPage 2 of 3 Product Description The phones OVFKWC-K4X4 are Tri-mode Dual-Band 1XRTT products. Models that contain the letter “L” have integrated Assisted GPS software feature enabled to meet the emergency location requirements of the FCC’s E911 Phase II mandate. The Tri-mode architecture is defined as 1900MHz (PCS CDMA), 800MHz (cellular CDMA and AMPS). All models included in the OVFKWC-K4X4 filing use the same antenna and have identical PCB layouts in regards to the RF Circuitry, Basic Frequency Determining and Stabilization Circuitry, Basic Modulator Circuit, Transmitter Active Devices, and Tuning Targets. The only differences between models are the mechanical design of each model family’s front housings, choice of color or greyscale LCD, and software applications supported (GPS, Brew, WAP, etc.). See product matrix in Figure 1 below. The phone is designed in compliance with the technical specifications for compatibility of mobile and base stations in the Cellular Radio telephone service contained in “Cellular System Mobile Station -Land Station Compatibility Specification” as specified in OET Bulletin 53 and TIA Standards The phone will support certain CDMA2000 radio-configurations (RC) as describes in Exhibit 1 (operation description). Phantom RaveRaveAktivEnergi K450K404K430K480K490 Non-BREW / BREWNon-BREW / BREWNon-BREW / BREWNon-BREW / BREW KWC Trimode/GPS/GreyscaleK454LK434LK484L KWC Trimode/no GPS/Greyscale K454NK434NK484N KWC Trimode/GPS/ColorK454LC / K454XLCK404AK434LC / K434XLCK484LC / K484XLCK494LC / K494XLC KWC Trimode/no GPS/ColorK454NC / K454XNCK434NC / K434XNCK484NC / K484XNCK494NC / K494XNC KWC Trimode/GPS/WAP 2.0K454MC / K454XMCK434MC / K434XMCK484MC / K484XMCK494MC / K494XMC Figure 1 OVFKWC-K4X4 Product Matrix FCC ID: OVFKWC-K4X4 Exhibit 8 - OVFKWC-K4X4 Internal Photos.docPage 3 of 3 Me…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 1 of 19 Appendix C: probe calibration parameters Please see separate attachment FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 2 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 3 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 4 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 5 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 6 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 7 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 8 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 9 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 10 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 11 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 12 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 13 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 14 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 15 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 16 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 17 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 18 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 19 of 19

FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 1 of 19 Appendix C: probe calibration parameters Please see separate attachment FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 2 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 3 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 4 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 5 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 6 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 7 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 8 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 9 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 10 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 11 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 12 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 13 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 14 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 15 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 16 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 17 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 18 of 19 FCC ID: OVFKWC-K4X4 Exhibit 9 - OVFKWC-K4X4 Appendix C Probe Calibration.docPage 19 of 19

FCC ID:OVFKWC-K4X4 Test Report From Kyocera Wireless Corp Dual-Band Tri-mode AMPS/CDMA Cellular Phone FCC Part 22 & 24 Certification IC RSS-129 & 133 FCC ID: OVFKWC-K4X4 Model: K404A (Rave), K430 (Rave) Family, K450 (Phantom) Family, K480 (Aktiv) Family, and K490 (Energi) Family STATEMENT OF COMPLIANCE Kyocera Wireless Corp declares under its sole responsibility that the product, FCC ID: OVFKWC- K4X4 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted: NONE. Date of Test:May 21, 2004 – June 22, 2004 Test performed by:Kyocera Wireless Corp 10300 Campus Point Drive CA 92121 Report Prepared by:Patrick Bowen, Staff …

Text truncated - open the document above for the full version.