OVFKWC-KPC650CDMA Dual-Band PCMCIA Card

DRAFT COPY-X2 Verizon Wireless VZAccess SM Manager User Guide for the Kyocera KPC650 PC Card Trademarks and Service Marks Verizon Wireless is a trademark of Verizon Trademark Services LLC, and the other trademarks, logos, and service marks (collectively the "Trademarks") used in this help file are the property of Verizon Wireless or their respective owners. Nothing contained in this help file should be construed as granting by implication, estoppel, or otherwise, a license or right of use of Verizon Wireless or any other Trademark displayed in this help file without the written permission of Verizon Wireless or its respective owner. VZAccess SM is a service mark of Verizon Wireless Quick 2 Net SM is a service mark of Verizon Wireless. Venturi TM is a trademark of Venturi Wireless. QuickLink® is a registered trademark of Smith Micro Software, Inc. Microsoft®, Hotmail, MSN®, ActiveSync®, Outlook®, Outlook Express® and Windows® are either registered trademarks or trademarks of Microsoft® Corporation in the United States and/or other countries. Netscape and the Netscape N and Ship's Wheel logos are registered trademarks of Netscape Communications Cor- poration in the U.S. and other countries. AOL® is a registered trademark of America Online, Inc. Aironet®, Cisco®, Cisco Systems® are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. HotSync® is a registered trademark of Palm, Inc. Kyocera® is a registered trademark of Kyocera Corporation. The names of actual companies and products mentioned in this user guide may be the trademarks of their respec- tive owners. Copyright 2004 Verizon Wireless. All rights reserved. Copyright 2004, Kyocera Wireless Corp. All rights reserved 82-M8831-1, Rev X2 User Guide for the Kyocera KPC650iii Table of Contents KPC650 PC Card Introduction ............................................................................................................................................... 1 Checklist .......................................................................................................................................................................................... 1 About this guide ............................................................................................................................................................................... 1 About your Kyocera KPC650 PC Card ............................................................................................................................................ 2 Power Management ................................................................................................................................................................. 2 Other Features and Benefits .................................................................................................................................................... 2 Storage ..................................................................................................................................................................................... 2 Installation and Configuration .............................................................................................................................................. 3 Notebook PC Installation Precautions ............................................................................................................................................. 3 System Requirements ...................................................................................................................................................................... 3 Setup Instructions ............................................................................................................................................................................ 3 Step 1: Install PC Card Drivers ................................................................................................................................................. 3 Step 2: Install VZAccess Manager ........................................................................................................................................... 4 Step 3: Run the VZAccess Manager Setup Wizard .................................................................................................................. 6 Step 4: Install Your KPC650 PC Card. ..................................................................................................................................... 8 Ejecting the KPC650 .............................................................................................................................................................. 11 VZAccess Manager from Verizon Wireless ........................................................................................................................ 12 Supported Services ........................................................................................................................................................................ 12 NationalAccess and BroadbandAccess defined ..................................................................................................................... 12 VZAccess Manager Tools .............................................................................................................................................................. 13 WWAN (Wireless Wide Area Network, 1xEV-DO/1xRTT/CDMA) Features ........................................................................... 13 Wi-Fi Features ........................................................................................................................................................................ 13 Other Features ....................................................................................................................................................................... 13 Getting Started with VZAccess Manager .......…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 1 of 1 September 21, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application for Cellular and PCS Transceiver Certification To Whom It May Concern: Kyocera Wireless Corporation (KWC) herein submits the Application for Equipment Authorization (FCC Form 731) and Exhibits for Certification of a Cellular & PCS Transceiver, FCC ID: OVFKWC-KPC650. Applicant: Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121-1522 Manufacture: Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121 The equipment is for mobile station cellular and PCS system use. The OVFKWC-KPC650 is in full compliance with all parts of EIA/TIA/IS-98-B&D Mobile Station-Land Station Compatibility Specification, issue July 2000 and March 2001, and also in full compliance with all parts of ANSI J-STD-08, Recommended Minimum Performance Requirements for 1.8 to 2 GHz Code Division Multiple Access (CDMA) Personal Stations, issue July 1996. Information concerning how the ESN protection requirements are met is provided in Exhibit 10. Please contact me at Tel: (858) 882-1773 or Email: [email protected] if there are any questions or if any additional information is needed. Kyocera Wireless Corporation Fernando Calimbahin Engineer

FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp. 1 September 28, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re:Request of Confidentiality for FCC ID: OVFKWC-KPC650 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Kyocera Wireless Corp (KWC) hereby requests confidential and treatment of information accompanying this Application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also requesting Short-Term Confidentiality as outlined in Public Notice DA 04-1705. This provision will give KWC Temporary Confidentiality of commercially sensitive information prior to product launch. The requested Confidential and Temporary Confidential exhibits are listed in table 1 below: Table 1. Confidential and Short-Term Confidential ExhibitDescription 1Operation Descriptions 2Block diagrams 3Schematics Confidential 4Parts Lists 5Instruction Manual 7External Photos Short-Term Confidential 8Internal Photos The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, C K Li C. K. Li Engineer, Senior Staff/Manager Kyocera Wireless Corporation

FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 1 of 20 September 28, 2004 Re: Kyocera Wireless Corp, FCC ID: OVFKWC-KPC650, Assessment N To Mike Kuo: Thank you for your feedback on the FCC application that I have submitted. Please find my responses to your questions below. Question: Question #1: Based upon FCC public notice DA 04-1705, only the following attachments can be granted as short-term confidentiality: "External Photos, Test Setup Photos, Block Diagram, Schematics, user's Manual, Internal Photos, Parts List / Tune-up Procedures, and Operational Description." All test reports (including SAR report and support attachments) can not be granted as long term or short term confidentiality. Please submit revised request for confidentiality to comply FCC public Notice DA 04-1705 requirements. Response: The Request for Confidentiality request has been revised as you requested to comply with the FCC public Notice DA 04-1705 requirements. See attached document “OVFKWC-KPC650 Request for confidentiality 9-28- 2004.pdf”. SAR Portion: Question: Question #4: section 2.2 of SAR test report listed the Host #2 as Toshiba Notebook M/N:Portege PP01L, but model name R100 was actually tested ( based upon the test report ). Please make necessary correction on section 2.2. As indicated on page 13 of SAR test report, Toshiba R100 was tested with extended battery which caused the notebook computer can not have direct contact to the flat phantom. In addition, the PCMCIA card was tilted with angle which may disturb the SAR distribution. Please either test R100 without extended battery or select different notebook computer to repeat the tests. FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 2 of 20 Response: The make and models of the host computers that were tested as part of the original SAR report should read: Host #DescriptionManufacturerModelOverall Dimension 1Laptop ComputerDellLatitude PP01L31.5cm x 25cm x 4.1cm 2Laptop ComputerToshibaPortege R10028.5cm x 22.5cm x 3cm 3Laptop ComputerHewlett-PackardCompaq nx500032.5cm x 27cm x 3.8cm The SAR report has been revised with the correct model number information. See attached document “Exhibit 9 OVFKWC-KPC650 SAR Report 9-28-2004.pdf”. The Toshiba R100 extended battery that was tested as part of the original SAR report is the standard battery for that notebook computer. Removing the extended battery in order to make the notebook computer have direct contact to the flat phantom would require tests to be performed without any battery present on Toshiba Portege R100. The notebook computer would then only operate if connected to the AC adapter. Therefore, an additional host notebook computer, the Dell Latitude D600, has been tested for SAR as requested. The results of the additional SAR testing can be found in the attached document, “OVFKWC-KPC650 Supplemental SAR Report 9- 28-004.pdf”. Note: The Dell Latitude D600 maximum SAR results are below the maximum values listed in the original SAR report. Host #DescriptionManufacturerModelOverall Dimension 4Laptop ComputerDellLatitude D60032cm x 26cm x 3.5cm Question: Question #5: What is the liquid depth? Please indicate this information in the SAR test report. Response: The minimum 15cm depth of the liquid is verified by the test operator when preparing the SAM phantom for testing. A measurement device with markings at 15cm is used to ensure that phantom is filled with the proper amount of liquid prior to performing the validation and SAR measurements. In addition, the z-axis scans are performed on the worse case SAR measurements to verify adequate liquid depth. The reference to the 15cm depth of the liquid in the phantom can be found in section "5.3 Tissue Stimulants" of the test report. Question: Question #6: Please provide Dipole calibration report. Response: See “Appendix A: Dipole Calibration” at the end of this correspondence. FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 3 of 20 Part 22/24 portion: Question: Question #7: Please provide lower and upper band edge plots to address 22.917(c) requirements. Response: CDMA 800 Lower Band Edge CDMA 800 Upper Band Edge FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 4 of 20 I hope the responses I have submitted answered all your concerns regarding filing OVFKWC-KPC650. Please contact me at Tel: (858) 882-1552 or Email: mailto:[email protected] if there are any questions or if any additional information is needed. Kyocera Wireless Corporation Patrick Bowen Staff Engineer FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 5 of 20 Appendix A: Dipole Calibration FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 6 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 7 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 8 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 9 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 10 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 11 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 12 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 13 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 14 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 15 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 16 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 17 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 18 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 19 of 20 FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 20 of 20

Mike Kuo From: Mike Kuo Sent: Thursday, January 13, 2005 8:59 AM To: 'Rich Fabina' Subject: RE: Kyocera FCC ID:OVFKWC-KPC650, TCB confirmation No:TC168844 Attachments: TCB Sample Request ERP and EIRP Measurement Kyocera FCC 22 & 24.pdf 1/24/2005 Hi Rich: CCS has performed sample testing on above device. The max. ERP and EIRP measured by CCS are : Part 22 / ERP: 25.4 dBm Part 24 / EIRP :25.8 dBm Attached please find ERP/EIRP measurement result. The measurement made by CCS are within +/-3 dB ERP/EIRP tolerance allowed. Based upon measurement result, I am requesting the Commission to put this application in audit mode so TCB can make necessary changes on the ERP/EIRP output power based upon statement made by the applicant. Best Regards Mike Kuo From: Rich Fabina [mailto:[email protected]] Sent: Wednesday, December 22, 2004 2:06 PM To: Mike Kuo Subject: RE: Kyocera FCC ID:OVFKWC-KPC650, TCB confirmation No:TC168844 Mike, I suggest that you test a sample of the device to confirm that the output power was indeed incorrect due to operator/testing errors. You can use this one sample test as part of the 2% that a TCB is required to test during the yearly operations. After you confirm that the output power is indeed incorrect, submit this test report to the Commission along with the original request to place this application into the audit mode. At that time, we will be happy to assist you in making the necessary corrections. Rich -----Original Message----- From: Mike Kuo [mailto:[email protected] ] Sent: Monday, December 20, 2004 8:14 PM To: Rich Fabina Subject: Kyocera FCC ID:OVFKWC-KPC650, TCB confirmation No:TC168844 Hi Rich : Above subject TCB application was granted by CCS-TCB on Sept.29, 2004. During the review process, the original test report submitted by Kyocera has reported higher output power due to the operator errors by the test lab. None of device has been sold by Kyocera. Attached please find the written statement by Kyocera. Request : Please review the conditions as stated in Kyocera letter. If you agreed with their statement, I would like to request the commission to put this grant in audit mode or you may dismiss the grant. Your prompt attention to this request is highly appreciated. Merry Christmas and Happy New Year (CCS scheduled holiday :12/24, 12/27, 12/28 and 01/03/05) Mike Kuo Compliance Certification Services 561F Monterey Road Morgan Hill CA 95037 Tel: (408)463-0885 x: 105 Fax: (408)463-0888 http://www.ccsemc.com 1/24/2005

FCC ID: OVFKWC-KPC650 Kyocera Wireless Corp.Page 1 of 1 December 20, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Notification of Corrections Necessary to the OVFKWC-KPC650 FCC Grant. To Whom It May Concern: Kyocera Wireless Corporation (KWC) herein submits the notification of corrections necessary for the OVFKWC-KPC650 FCC Grant. Applicant: Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121-1522 Manufacture: Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121 During recent testing at Nemko USA, Inc. for radiated power and radiated emissions, it was discovered that there was an error in the calibration factors that were used in the test report that was used for the FCC grant issued on 09/29/2004; FCC ID: OVFKWC-KPC650. The incorrect calibration factors were used for the PCS substitution method measurements. This was due to the test lab operator's error in manually entering the values from the incorrect calibration data look-up table. The result of the error was that the maximum radiated power stated in the FCC grant was overstated. The revised reports, with the appropriate corrections made, have been submitted for review (see attached). The data in the revised reports shall be used to make the necessary corrections on the OVFKWC-KPC650 FCC grant. The attached test reports are to receive the same short-term confidentiality that is being used on the files of the original FCC submittal. Exhibit AffectedDescription of Change Exhibit 10 OVFKWC-KPC650 Part 22_24 Report Rev 1.pdf The Maximum Output (W) has been changed from 0.691 to 0.262 for PCS Power in Section 1 General Information table. Exhibit 10 OVFKWC-KPC650 Radiated Emissions Report Rev 1.pdf The values on page 6 in the PCS Signal Substitution have been changed in the Cable Losses (dB) and calculated Total (EIRP) dBm columns. Please note that none of the OVFKWC-KPC650 devices are currently being marketed and sold to the public with the overstated radiated output power listed on the current FCC grant. Please contact me at Tel: (858) 882-1552 or Email: mailto:[email protected] if there are any questions or if any additional information is needed. Kyocera Wireless Corporation Patrick Bowen Staff Engineer

FCC ID: OVFKWC-KPC650 Exhibit 7 External Photos.doc Page 1 of 2 Exhibit 7: OVFKWC-KPC650 External Photos TOP BOTTOM FCC ID: OVFKWC-KPC650 Exhibit 7 External Photos.doc Page 2 of 2 SIDES

FCC ID: OVFKWC-KPC650 Exhibit 6 Label Information.doc Page 1 of 1 Exhibit 6: OVFKWC-KPC650 ID Label Label Format Label Location FCC ID: OVFKWC-KPC650 IC: 3572A-KPC650

FCC ID: OVFKWC-KPC650 Exhibit 8 Internal Photos.docPage 1 of 2 Exhibit 8: OVFKWC-KPC650 Internal Photos FCC ID: OVFKWC-KPC650 Exhibit 8 Internal Photos.docPage 2 of 2

FCC ID:OVFKWC-KPC650 SAR Test Report On Dual-band CDMA 800/1900 PCMCIA Card FCC Part 22 & 24 Certification FCC ID: OVFKWC-KPC650 Model: KPC 650 Date: September 21, 2004 STATEMENT OF COMPLIANCE Kyocera Wireless Corp declares under its sole responsibility that the product, FCC ID: OVFKWC- KPC650 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted: NONE. Date of Test:August 31, 2004 to September 1, 2004 Test performed by:Kyocera Wireless Corp 10300 Campus Point Drive CA 92121 Report Prepared by:Fernando Calimbahin, Engineer Report Reviewed by:C. K. Li, Engineer, Senior Staff/Manager FCC ID:OVFKWC-KPC650 Table of Contents 1INTRODUCTION..................................................................................................................................................3 2EQUIPMENT UNDER TEST (EUT) .....................................................................................................................3 2.1 A CCESSORIES....................................................................................................................................................3 2.2 H OST DEVICES...................................................................................................................................................4 3SAR TEST RESULT SUMMARY........................................................................................................................4 3.1 M AXIMUM RESULTS FOUND DURING SAR EVALUATION........................................................................................4 3.2 M EASUREMENT UNCERTAINTY............................................................................................................................5 4TEST CONDITIONS ............................................................................................................................................5 4.1 A MBIENT CONDITIONS........................................................................................................................................5 4.2 RF CHARACTERISTICS OF THE TEST SITE.............................................................................................................5 4.3 T EST SIGNAL, FREQUENCIES AND OUTPUT POWER..............................................................................................5 4.4 D EVICE TEST CONDITIONS..................................................................................................................................5 5DESCRIPTION OF THE TEST EQUIPMENT......................................................................................................6 5.1 D OSIMETRIC SYSTEM.........................................................................................................................................6 5.2 A DDITIONAL EQUIPMENT NEEDED IN VALIDATION...................................................................................................6 5.3 T ISSUE STIMULANTS...........................................................................................................................................6 5.4 P HANTOMS DESCRIPTION...................................................................................................................................7 5.5 I SOTROPIC E-FIELD PROBE.................................................................................................................................7 6SYSTEM VALIDATION .......................................................................................................................................8 7DESCRIPTION OF THE TEST PROCEDURE ....................................................................................................9 7.1 T EST POSITIONS................................................................................................................................................9 7.1.1Test Configuration................................................................................................................................9 7.2 S CAN PROCEDURES.........................................................................................................................................10 7.3 SAR A VERAGING METHODS.............................................................................................................................10 8MEASUREMENT UNCERTAINTY ....................................................................................................................10 9TEST DATA .......................................................................................................................................................11 9.1 BODY SAR T EST RESULTS.............................................................................................................................11 10TEST SETUP PHOTOS .....................................................................................................................................12 APPENDIX A: VALIDATION TEST PRINTOUT ........................................................................................................15 APPENDIX B: SAR DISTRIBUTION PRINTOUT......................................................................................................18 APPENDIX C: PROBE CALIBRATION PARAMETERS ..........................................................................................18 FCC ID: OVFKWC-KPC650 Exhibit 9 SAR Report.docPage 3 of 18 1 INTRODUCTION This test report describes an environmental evaluation measurement of specific absorption rate (SAR) distribution in simulated human body tissues exposed to radio frequency (RF) radiation from a wireless portable device manufact…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 1 of 13 Appendix B: OVFKWC-KPC650 SAR Plots FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 2 of 13 Section 1 CDMA 1900 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 3 of 13 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 4 of 13 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 5 of 13 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 6 of 13 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 7 of 13 Section 2 CDMA 800 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 8 of 13 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 9 of 13 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 10 of 13 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 11 of 13 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 12 of 13 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix B SAR Plots Page 13 of 13

FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 1 of 10 Exhibit 9: Appendix C Probe Calibration FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 2 of 10 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 3 of 10 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 4 of 10 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 5 of 10 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 6 of 10 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 7 of 10 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 8 of 10 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 9 of 10 FCC ID: OVFKWC-KPC650 Exhibit 9 Appendix C Probe Calibration.doc Page 10 of 10

FCC ID:OVFKWC-KPC650 Supplemental SAR Test Report On Dual-band CDMA 800/1900 PCMCIA Card FCC Part 22 & 24 Certification FCC ID: OVFKWC-KPC650 Model: KPC 650 Date: September 28, 2004 STATEMENT OF COMPLIANCE Kyocera Wireless Corp declares under its sole responsibility that the product, FCC ID: OVFKWC- KPC650 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted: NONE. Date of Test:September 28, 2004 Test performed by:Kyocera Wireless Corp 10300 Campus Point Drive CA 92121 Report Prepared by:Fernando Calimbahin, Engineer Report Reviewed by:C. K. Li, Engineer, Senior Staff/Manager FCC ID:OVFKWC-KPC650 Table of Contents 1HOST DEVICES...................................................................................................................................................3 2MAXIMUM RESULTS FOUND DURING SAR EVALUATION ...........................................................................3 3DESCRIPTION OF THE TEST EQUIPMENT......................................................................................................3 3.1 D OSIMETRIC SYSTEM.........................................................................................................................................3 3.2 A DDITIONAL EQUIPMENT NEEDED IN VALIDATION...................................................................................................3 4SYSTEM VALIDATION .......................................................................................................................................4 5TEST DATA .........................................................................................................................................................5 5.1 BODY SAR T EST RESULTS...............................................................................................................................5 6TEST SETUP PHOTOS .......................................................................................................................................6 APPENDIX A: VALIDATION TEST PRINTOUT ..........................................................................................................7 APPENDIX B: SAR DISTRIBUTION PRINTOUT...................................................................................................…

Text truncated - open the document above for the full version.