OVFKWC-KX1Tri mode dual band mobile phone

Kyocera SoHo User Guide Draft Kyocera Wireless Corp. Proprietary This Draft is for internal use only. 82-K5867-1EN, Rev.X2 (Front Cover Artwork TBD) User Guide for the Kyocera SoHo Phone This manual is based on the production version of the Kyocera SoHo phone. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents: 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 5,193,094 5,228,054 5,257,283 5,265,119 5,267,261 5,267,262 5,280,472 5,283,536 5,289,527 5,307,405 5,309,474 5,337,338 5,339,046 5,341,456 5,383,219 5,392,287 5,396,516 D356,560 5,408,697 5,414,728 5,414,796 5,416,797 5,426,392 5,437,055 D361,065 5,442,322 5,442,627 5,452,473 5,461,639 5,469,115 5,469,471 5,471,497 5,475,870 5,479,475 5,483,696 5,485,486 5,487,175 5,490,165 5,497,395 5,499,280 5,504,773 5,506,865 5,509,015 5,509,035 5,511,067 5,511,073 5,513,176 5,515,177 5,517,323 5,519,761 5,528,593 5,530,928 5,533,011 5,535,239 5,539,531 5,544,196 5,544,223 5,546,459 5,548,812 5,559,881 5,559,865 5,561,618 5,564,083 5,566,000 5,566,206 5,566,357 5,568,483 5,574,773 5,574,987 D375,740 5,576,662 5,577,022 5,577,265 D375,937 5,588,043 D376,804 5,589,756 5,590,069 5,590,406 5,590,408 5,592,548 5,594,718 5,596,570 5,600,754 5,602,834 5,602,833 5,603,096 5,604,459 5,604,730 5,608,722 5,614,806 5,617,060 5,621,752 5,621,784 5,621,853 5,625,876 5,627,857 5,629,955 5,629,975 5,638,412 5,640,414 5,642,398 5,644,591 5,644,596 5,646,991 5,652,814 5,654,979 5,655,220 5,657,420 5,659,569 5,663,807 5,666,122 5,673,259 5,675,581 5,675,644 5,680,395 5,687,229 D386,186 5,689,557 5,691,974 5,692,006 5,696,468 5,697,055 5,703,902 5,704,001 5,708,448 5,710,521 5,710,758 5,710,768 5,710,784 5,715,236 5,715,526 5,722,044 5,722,053 5,722,061 5,722,063 5,724,385 5,727,123 5,729,540 5,732,134 5,732,341 5,734,716 5,737,687 5,737,708 5,742,734 D393,856 5,748,104 5,751,725 5,751,761 5,751,901 5,754,533 5,754,542 5,754,733 5,757,767 5,757,858 5,758,266 5,761,204 5,764,687 5,774,496 5,777,990 5,778,024 5,778,338 5,781,543 5,781,856 5,781,867 5,784,406 5,784,532 5,790,589 5,790,632 5,793,338 D397,110 5,799,005 5,799,254 5,802,105 5,805,648 5,805,843 5,812,036 5,812,094 5,812,097 5,812,538 5,812,607 5,812,651 5,812,938 5,818,871 5,822,318 5,825,253 5,828,348 5,828,661 5,835,065 5,835,847 5,839,052 5,841,806 5,842,124 5,844,784 5,844,885 5,844,899 5,844,985 5,848,063 5,848,099 5,850,612 5,852,421 5,854,565 5,854,786 5,857,147 5,859,612 5,859,838 5,859,840 5,861,844 5,862,471 5,862,474 5,864,760 5,864,763 5,867,527 5,867,763 5,870,427 5,870,431 5,870,674 5,872,481 5,872,774 5,872,775 5,872,823 5,877,942 5,878,036 5,870,631 5,881,053 5,881,368 5,884,157 5,884,193 5,884,196 5,892,178 5,892,758 5,892,774 5,892,816 5,892,916 5,893,035 D407,701 5,898,920 5,903,554 5,903,862 D409,561 5,907,167 5,909,434 5,910,752 5,911,128 5,912,882 D410,893 5,914,950 5,915,235 5,917,708 5,917,811 5,917,812 5,917,837 5,920,284 D411,823 5,923,650 5,923,705 5,926,143 5,926,470 5,926,500 5,926,786 5,930,230 5,930,692 Other patents pending. The Kyocera Wireless Corp. ("KWC") products described in this manual may include copyrighted KWC and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for KWC and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the KWC products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law. Furthermore, the purchase of the KWC products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of KWC or any third party software provider, except for the normal, non-exclusive royalty- free license to use that arises by operation of law in the sale of a product. Kyocera is a registered trademark of Kyocera Corporation. Doodler, and Race 21 are trademarks of Kyocera Wireless Corp. Tetris is a registered trademark of Elorg Company LLC. QUALCOMM is a registered trademark of QUALCOMM, Inc. Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. All other trademarks are the property of their respective owners. Copyright © 2004 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2002 Kyocera Wireless Corp. 82-K5867-1EN, Rev. X2 FCC/IC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Wireless Corp. (KWC) supplied and approved case CA90-8181-01 and holster CV90-L8010-01. Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 25 mm separation distance including the antenna and the user’s body. THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-KX1 Kyocera Wireless Corp. 1 June 14, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request of Confidentiality for FCC ID: OVFKWC-KX1 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Kyocera Wireless Corp hereby requests confidential treatment of information accompanying this Application as outlined below: ExhibitDescription 1Operation Descriptions 2Block diagrams 3Schematics 4Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Lin Lu Lin Lu Engineer, Principal Kyocera Wireless Corporation

FCC ID: OVFKWC-KX1 Kyocera Wireless Corp. 1 June 14, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re:Application for Cellular and PCS Transceiver Type Acceptance Kyocera Wireless Corporation (KWC) herein submits the Application for Equipment Authorization (FCC Form 731) and Exhibits for Type Acceptance of a Cellular & PCS Transceiver, FCC ID: OVFKWC-KX1. Applicant:Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121-1522 Manufacture:Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, California 92121 The equipment, KWC model # KX1, is for mobile station cellular and PCS system use. The KX1 is in full compliance with all parts of EIA/TIA/IS-98-B&D Mobile Station-Land Station Compatibility Specification, issue July 2000 and March 2001, and also in full compliance with all parts of ANSI J-STD-018, Recommended Minimum Performance Requirements for 1.8 to 2 GHz Code Division Multiple Access (CDMA) Personal Stations, issue July 1996. The KX1 has E911 Phase II GPS capability. Information concerning how the ESN protection requirements are met is provided in Part 22_24 report. Please contact me at Tel: (858) 882-2406 or Email: [email protected], if there are any questions or additional information needed. Sincerely, Lin Lu Lin Lu Engineer, Principal Kyocera Wireless Corporation

This document was generated in response to a request for additional technical information by Diane Poole in regards to the type approval of the KX1. The information included in related to the 2 specific topics discussed in the following email received by Lin Lu on July 29, 2004: Date: Thu, 29 Jul 2004 14:44:34 -0400 (EDT) From: OET Generic account <[email protected]> To: [email protected] Subject: FCC Equipment Authorization System X-BigFish: vpcs-50(zz655IL15b2R128aRec5M1936M122eHzzzzz) To: Lin Lu, Kyocera Wireless Corp From: Diane Poole [email protected] FCC Application Processing Branch Re: FCC ID OVFKWC-KX1 Applicant: Kyocera Wireless Corp Correspondence Reference Number: 27310 731 Confirmation Number: EA912025 Please resubmit page 5 of 17 operational Description. It is not readable. Date: Thu, 29 Jul 2004 16:01:10 -0400 (EDT) From: OET Generic account <[email protected]> To: [email protected] Subject: FCC Equipment Authorization System X-BigFish: vpcs-50(zz655IL15b2R128aRec5M1936M122eHzzzzz) To: Lin Lu, Kyocera Wireless Corp From: Diane Poole [email protected] FCC Application Processing Branch Re: FCC ID OVFKWC-KX1 Applicant: Kyocera Wireless Corp Correspondence Reference Number: 27312 731 Confirmation Number: EA912025 Is the rule part 22 or 22H? (row 4 of tech spec 824.7-848.31, at .318W with emission Designator 1M25F9W). Please verify. 1) Please resubmit page 5 of 17 operational Description. It is not readable The Figure 6.1.3 1-2 on page 5 was not readable. Here we have updated the Figure 6.1.3 1-2 per the latest version of IS-95B and resubmitted in the following pages. TIA/EIA-95-B 14.4 ksps Access Channel Information Bits (88 bits/frame) Code Symbol Add 8-bit Encoder Tail per Frame 4.8 kbps 4.4 kbps Convolutional Encoder r=1/3 K=9 Symbol Repetition Repeated Code Symbol 64-ary Orthogonal Modulator Modulation Symbol (Walsh chip) 28.8 ksps28.8 ksps Block Interleaver Repeated Code Symbol 4.8 ksps (307.2 kcps) 1/2 PN chip Delay = 406.9 ns D Q(t) I(t) Baseband Filter Baseband Filter I-channel Sequence 1.2288 Mcps Q-channel Sequence 1.2288 Mcps I Q Long Code Generator PN chip 1.2288 Mcps Long Code Mask s(t)S cos(2pf c t) sin(2pf c t) 1 Figure 6.1.3.1-2a. Reverse CDMA Channel Structure for the Access Channel2 TIA/EIA-95-B Fundamental Reverse Code Channel Information Bits (172, 80, 40, or 16 bits/frame) 8.6 kbps 4.0 kbps 2.0 kbps 0.8 kbps 9.6 kbps 4.8 kbps 2.4 kbps 1.2 kbps 28.8 kbps Code Symbol Repeated Code Symbol 28.8 kbps 14.4 kbps 7.2 kbps 3.6 kbps Modulation Symbol (Walsh chip) 4.8 ksps (307.2 kcps) Long Code Mask PN chip 1.2288 Mcps A 0 Repeated Code Symbol Add Frame Quality Indicator (12, 8, 0, or 0 bits/frame) Convolutional Encoder r = 1/3, K = 9 64-ary Orthogonal Modulator Data Burst Randomizer Symbol Repetition Block Interleaver Long Code Generator A 0 Add 8-bit Encoder Tail per Frame 1 Figure 6.1.3.1-2b. Reverse CDMA Channel Structure for Fundamental2 Code Channels with Rate Set 13 2) Is the rule part 22 or 22H? (row 4 of tech spec 824.7-848.31, at .318W with emission Designator 1M25F9W). Please verify. Sorry, it was a typo. It should follow in the rule Part 22H – Cellular Radiotelephone Service.

FCC ID: OVFKWC-KX1 Exhibit 7_ External Photos.docPage 1 of 5 Exhibit 7: External Photos Front ID1 ‘Feng’ ID1 ‘Shui’ ID2 ‘Bundle’ FCC ID: OVFKWC-KX1 Exhibit 7_ External Photos.docPage 2 of 5 Side View FCC ID: OVFKWC-KX1 Exhibit 7_ External Photos.docPage 3 of 5 Back View FCC ID: OVFKWC-KX1 Exhibit 7_ External Photos.docPage 4 of 5 Flip Open View

FCC ID: OVFKWC-KX1 Exhibit 6_Label Infomation.docPage 1 of 1 Exhibit 6: FCC Label Information 1 Label Format FCC ID will be located in area “F” as shown below: FCC ID: OVFKWC-KX1 2 Label Location

FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 1 of 12 Exhibit 8: Internal Photos Battery Door Assembling FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 2 of 12 ID1 Front Housing Assembling FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 3 of 12 Back Housing FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 4 of 12 ID1 Up-Half Asembling _ 1 FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 5 of 12 ID1 Up-Half Assembling _ 2 FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 6 of 12 Up-Half Assembling _ 3 FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 7 of 12 Lower-Half Assembling _ 1 FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 8 of 12 Lower-Half Assembling _ 2 FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 9 of 12 Main Board FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 10 of 12 ID2 Front Housing Assembling FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 11 of 12 FCC ID: OVFKWC-KX1 Exhibit 8_ Internal Photos.docPage 12 of 12 ID2 Up-Half Asembling _ 1 ID2 Up-Half Asembling _ 2

FCC ID:OVFKWC-KX1 SAR Test Report On Dual-Band Tri-mode AMPS/CDMA Cellular Phone FCC Part 22 & 24 Certification FCC ID: OVFKWC-KX1 Model: KX1 Original Grant Dates: STATEMENT OF COMPLIANCE Kyocera Wireless Corp declares under its sole responsibility that the product, FCC ID: OVFKWC- KX444 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted: NONE. Date of Test:May 20 - June 15, 2004 Test performed by:Kyocera Wireless Corp 10300 Campus Point Drive CA 92121 Report Prepared by:Lin Lu, Regulatory Engineer, Principal FCC ID:OVFKWC-KX1 Table of Contents 1INTRODUCTION................................................................................................................................................................ 3 2EQUIPMENT UNDER TEST (EUT) ................................................................................................................................. 3 3SAR TEST RESULT SUMMARY ..................................................................................................................................... 5 3.1M AXIMUM RESULTS FOUND DURING SAR EVALUATION................................................................................................ 6 3.2H EAD CONFIGURATION................................................................................................................................................... 6 3.3B ODY WORN CONFIGURATION (WITH KWC BODY WORN ACCESSORIES) ....................................................................... 6 3.4M EASUREMENT UNCERTAINTY....................................................................................................................................... 6 4TEST CONDITIONS........................................................................................................................................................... 7 4.1A MBIENT CONDITIONS.................................................................................................................................................... 7 4.2RF CHARACTERISTICS OF THE TEST SITE......................................................................................................................... 7 4.3T EST SIGNAL, FREQUENCIES AND OUTPUT POWER......................................................................................................... 7 4.4D EVICE TEST CONDITIONS.............................................................................................................................................. 7 5DESCRIPTION OF THE TEST EQUIPMENT ............................................................................................................... 8 5.1D OSIMETRIC SYSTEM...................................................................................................................................................... 8 5.2A DDITIONAL EQUIPMENT NEEDED IN VALIDATION.......................................................................................................... 8 5.3T ISSUE STIMULANTS....................................................................................................................................................... 8 5.4P HANTOMS DESCRIPTION................................................................................................................................................ 9 5.5I SOTROPIC E-FIELD PROBE.............................................................................................................................................. 9 6SYSTEM VALIDATION .................................................................................................................................................. 10 7DESCRIPTION OF THE TEST PROCEDURE............................................................................................................. 11 7.1T EST POSITIONS............................................................................................................................................................ 11 7.1.1Initial Ear Position............................................................................................................................................... 11 7.1.2Cheek Position...................................................................................................................................................... 12 7.1.3Tilt Position .......................................................................................................................................................... 12 7.1.4Body Worn Configuration .................................................................................................................................... 13 7.2S CAN PROCEDURES....................................................................................................................................................... 13 7.3SAR A VERAGING METHODS......................................................................................................................................... 13 8MEASUREMENT UNCERTAINTY ............................................................................................................................... 14 9TEST DATA ....................................................................................................................................................................... 15 9.1H EAD SAR TEST RESULTS............................................................................................................................................ 15 9.2B ODY WORN SAR TEST RESULT...................................................................................................................…

Text truncated - open the document above for the full version.

Date/Time: 05/25/04 00:26:38 Test Laboratory: Kyocera Wireless 835Mhz. Validation at 20dbm. using Dipole 495 Communication System: CW, Frequency: 835 MHz, Duty Cycle: 1:1 Medium: HSL900,Medium parameters used: f = 835 MHz; σ = 0.922 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(6.6, 6.6, 6.6), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C 835Mhz Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 36.5 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 1.01 mW/g Peak SAR (extrapolated) = 1.43 W/kg SAR(1 g) = 0.936 mW/g; SAR(10 g) = 0.603 mW/g 0 dB = 1.01mW/g Date/Time: 05/27/04 01:05:01 Test Laboratory: Kyocera Wireless 835MHz. Validation at 20dbm. using Dipole 495 Communication System: CW, Frequency: 835 MHz, Duty Cycle: 1:1 Medium: HSL900,Medium parameters used: f = 835 MHz; σ = 0.923 mho/m; ε r = 41.4; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(6.6, 6.6, 6.6), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C 835Mhz Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 36.1 V/m; Power Drift = -0.0 dB Maximum value of SAR (measured) = 1.13 mW/g Peak SAR (extrapolated) = 1.57 W/kg SAR(1 g) = 1.04 mW/g; SAR(10 g) = 0.668 mW/g 0 dB = 1.13mW/g Date/Time: 05/28/04 00:28:00 Test Laboratory: Kyocera Wireless 835MHz. Validation at 20dbm. using Dipole 495 Communication System: CW, Frequency: 835 MHz, Duty Cycle: 1:1 Medium: HSL900,Medium parameters used: f = 835 MHz; σ = 0.911 mho/m; ε r = 41; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(6.6, 6.6, 6.6), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C 835Mhz Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 36.1 V/m; Power Drift = -0.005 dB Maximum value of SAR (measured) = 1.12 mW/g Peak SAR (extrapolated) = 1.58 W/kg SAR(1 g) = 1.03 mW/g; SAR(10 g) = 0.663 mW/g 0 dB = 1.12mW/g Date/Time: 05/26/04 10:11:35 Test Laboratory: Kyocera Wireless 1900Mhz. Validation at 20dbm. using Dipole 5d037 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.44 mho/m; ε r = 40; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(5.4, 5.4, 5.4), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C 1900Mhz Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 59.5 V/m; Power Drift = -0.003 dB Maximum value of SAR (measured) = 4.62 mW/g Peak SAR (extrapolated) = 7.21 W/kg SAR(1 g) = 4.09 mW/g; SAR(10 g) = 2.14 mW/g Info: Interpolated medium parameters used for SAR evaluation! 0 dB = 4.62mW/g Date/Time: 06/01/04 14:49:56 Test Laboratory: Kyocera Wireless 1900MHz. Validation at 20dbm. using Dipole 5d037 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.47 mho/m; ε r = 39.6; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(5.4, 5.4, 5.4), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C 1900Mhz Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 57.4 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 4.44 mW/g Peak SAR (extrapolated) = 6.94 W/kg SAR(1 g) = 3.91 mW/g; SAR(10 g) = 2.05 mW/g Info: Interpolated medium parameters used for SAR evaluation! 0 dB = 4.44mW/g

Date/Time: 05/25/04 13:26:31 Test Laboratory: Kyocera Wireless KX1 "Feng" #VM8G AMPS ch799 Left Cheek Communication System: AMPS 835, Frequency: 849.97 MHz, Duty Cycle: 1:1 Medium: HSL900,Medium parameters used (interpolated): f = 849.97 MHz; σ = 0.922 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(6.6, 6.6, 6.6), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C FM ch799 LC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.41 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 0.972 mW/g Peak SAR (extrapolated) = 1.24 W/kg SAR(1 g) = 0.910 mW/g; SAR(10 g) = 0.625 mW/g Info: Interpolated medium parameters used for SAR evaluation! 0 dB = 0.972mW/g Date/Time: 05/25/04 13:26:31 Test Laboratory: Kyocera Wireless KX1 "Feng" #VM8G AMPS ch799 Left Tilt Communication System: AMPS 835, Frequency: 849.97 MHz, Duty Cycle: 1:1 Medium: HSL900,Medium parameters used (interpolated): f = 849.97 MHz; σ = 0.922 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(6.6, 6.6, 6.6), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C FM ch799 LT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.8 V/m; Power Drift = -0.0 dB Maximum value of SAR (measured) = 0.252 mW/g Peak SAR (extrapolated) = 0.299 W/kg SAR(1 g) = 0.238 mW/g; SAR(10 g) = 0.180 mW/g Info: Interpolated medium parameters used for SAR evaluation! 0 dB = 0.252mW/g Date/Time: 05/27/04 14:47:26 Test Laboratory: Kyocera Wireless KX1 "Feng" #VM8G AMPS ch991 Right Cheek Communication System: AMPS 835, Frequency: 824.04 MHz, Duty Cycle: 1:1 Medium: HSL900,Medium parameters used (interpolated): f = 824.04 MHz; σ = 0.923 mho/m; ε r = 41.4; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Right Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(6.6, 6.6, 6.6), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C AMPS ch991 RC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.1 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 1.05 mW/g Peak SAR (extrapolated) = 1.39 W/kg SAR(1 g) = 0.990 mW/g; SAR(10 g) = 0.674 mW/g Info: Interpolated medium parameters used for SAR evaluation! 0 dB = 1.05mW/g Date/Time: 05/27/04 14:47:26 Test Laboratory: Kyocera Wireless KX1 "Feng" #VM8G AMPS ch991 Right Tilt Communication System: AMPS 835, Frequency: 824.04 MHz, Duty Cycle: 1:1 Medium: HSL900,Medium parameters used (interpolated): f = 824.04 MHz; σ = 0.923 mho/m; ε r = 41.4; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Right Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(6.6, 6.6, 6.6), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C AMPS ch991 RT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12 V/m; Power Drift = 0.1 dB Maximum value of SAR (measured) = 0.260 mW/g Peak SAR (extrapolated) = 0.317 W/kg SAR(1 g) = 0.250 mW/g; SAR(10 g) = 0.191 mW/g Info: Interpolated medium parameters used for SAR evaluation! 0 dB = 0.260mW/g Date/Time: 05/25/04 09:21:23 Test Laboratory: Kyocera Wireless KX1 "Feng" #VM8G CDMA-800 ch777 Left Cheek Communication System: CDMA-800, Frequency: 848.31 MHz, Duty Cycle: 1:1 Medium: HSL900,Medium parameters used (interpolated): f = 848.31 MHz; σ = 0.922 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(6.6, 6.6, 6.6), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C CDMA-800 ch777 LC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.47 V/m; Power Drift = 0.0 dB Maximum value of SAR (measured) = 0.995 mW/g Peak SAR (extrapolated) = 1.29 W/kg SAR(1 g) = 0.939 mW/g; SAR(10 g) = 0.646 mW/g Info: Interpolated medium parameters used for SAR evaluation! 0 dB = 0.995mW/g Date/Time: 05/25/04 09:21:23 Test Laboratory: Kyocera Wireless KX1 "Feng" #VM8G CDMA-800 ch1013 Left Tilt Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 Medium: HSL900,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.922 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 Phantom: SAM 12,Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1714, ConvF(6.6, 6.6, 6.6), Calibrated: 10/10/2003 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 10/3/2003 Measurement SW: DASY4, V4.2 Build 44 Postprocessing SW: SEMCAD, V1.8 Build 112 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C CDMA-800 ch1013 LT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.1 V/m; Power Drift = -0.1 d…

Text truncated - open the document above for the full version.