OVFKWC-KX160BTr-Mode Dual-Band AMPS/CDMA Phone W/Bluetooth

Xcursion KX160 Cover Art Goes Here ii User Guide for the Kyocera Xcursion Phone This manual is based on the production version of the Kyocera Xcursion KX160A and KX160B phones. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents: 4,901,307 5,109,390 5,267,262 5,416,797 5,506,865 5,544,196 5,657,420 5,101,501 5,267,261 5,414,796 5,504,773 5,535,239 5,600,754 5,778,338 5,228,054 5,337,338 5,710,784 5,05 Other patents pending. The Kyocera Wireless Corp. ("KWC") products described in this manual may include copyrighted KWC and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for KWC and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the KWC products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law. Furthermore, the purchase of the KWC products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of KWC or any third party software provider, except for the normal, non-exclusive royalty- free license to use that arises by operation of law in the sale of a product. Kyocera is a registered trademark of Kyocera Corporation. Doodler, and Race 21 are trademarks of Kyocera Wireless Corp. Tetris is a registered trademark of Elorg Company LLC. QUALCOMM is a registered trademark of QUALCOMM, Inc. Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. All other trademarks are the property of their respective owners. Copyright © 2005 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2002 Kyocera Wireless Corp. 82-N8671-1EN, Rev. 001 FCC/IC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Wireless Corp. (KWC) supplied and approved case CV90-K0956-01 and holster CV90-K0940-01. Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 25 mm separation distance including the antenna and the user’s body. THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone User Guide for the Kyocera Xcursion Phoneiii transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section http://www.fcc.gov/oet/fccid after searching on the FCC ID. FCC ID: OVFKWC-KX160A FCC ID: OVFKWC-KX160B Additional information on SAR can be found on the Cellular Telecommunications and Internet Association (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/ kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Caution The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the warranty and user’s authority to operate the equipment. Optimize your phone’s performance Use the guidelines on page 2 to learn how to optimize the performance and life …

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-KX160B Kyocera Wireless Corp. 1 September 8, 2005 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re:Request of Confidentiality for FCC ID: OVFKWC-KX160B To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Kyocera Wireless Corp (KWC) hereby requests confidential and treatment of information accompanying this Application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also requesting Short-Term Confidentiality as outlined in Public Notice DA 04-1705. This provision will give KWC Temporary Confidentiality of commercially sensitive information prior to product launch. The requested Confidential and Temporary Confidential exhibits are listed in table 1 below: Table 1. Confidential and Short-Term Confidential Description Technical Description Schematics Confidential Block Diagram Instruction Manual External Photos Short-Term Confidential Internal Photos The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, C K Li C. K. Li Engineer, Senior Staff/Manager Kyocera Wireless Corp.

1 Chris Harvey From:C.K. Li [[email protected]] Sent:Monday, October 10, 2005 5:42 PM To: Chris Harvey Subject:RE: Kyocera Wireless Corp, FCC ID: OVFKWC-KX160B, Assessment NO.: AN05T5153, Notice#1 Chris, There is no change in hardware. The only change was to increase the conducted RF power (from 2 dBm to 3.5 dBm) for Bluetooth section, via software setting. This has been described to CCS. Radiated and conducted tests were performed with the new power setting. CK At 05:03 PM 10/10/2005 -0400, Chris Harvey wrote: >CK, please confirm that there was no other change to this device since >it was submitted for Certification (you mentioned at the Workshop last >week that there was a device for which you were going to submit changes >before the application was granted). > >Thanks, >Chris > >Chris Harvey >Chris Harvey EMC Consultants, Inc. >[email protected] >cell 443-622-3300 > > >-----Original Message----- >From: C.K. Li [mailto:[email protected]] >Sent: Monday, October 10, 2005 2:47 PM >To: Compliance Certification Services >Cc: [email protected] >Subject: Re: Kyocera Wireless Corp, FCC ID: OVFKWC-KX160B, Assessment >NO.: AN05T5153, Notice#1 > >Chris, > >Updated Part 15 emission report has been uploaded. > >CK > >At 05:25 PM 9/20/2005 +0000, Compliance Certification Services wrote: > >CK, I have reviewed the above referenced TCB application and find > >that the following items are needed before the review can be > >completed: > > > >There does not seem to be Radiated Spurious Emissions documentation > >for spurious emissions in the restricted bands of operation as > >required by FCC 15.247, 15.205 and 15.209 in the Bluetooth transmit > >mode of operation. The Radiated Emissions test report states that > >radiated emissions were tested only in the receive mode of operation. > >Please provide compliance for the Radiated Spurious Emissions in the > >restricted bands of operation of FCC 15.205. > > 2 > >Best regards, > > > >Chris Harvey > >[email protected] > > > > > >The items indicated above must be submitted before processing can > >continue on the above referenced application. Failure to provide the > >requested information within 30 days of the original e-mail date may > >result in application dismissal and forfeiture of the filing fee. > >Also, please note that partial responses increase processing time and > >should not be submitted. Any questions about the content of this > >correspondence should be directed to the e-mail address listed below > >the name of the sender.

FCC ID: OVFKWC-KX160B External Photos Page 1 of 3 Model: KX160B Exhibit 7: OVFKWC-KX160B External Photos TOP VIEWS CLOSED AND OPEN FCC ID: OVFKWC-KX160B External Photos Page 2 of 3 Model: KX160B BOTTOM VIEWS CLOSED AND OPEN FLIP CLOSED FCC ID: OVFKWC-KX160B External Photos Page 3 of 3 Model: KX160B SIDE VIEWS FLIP OPEN SIDE VIEWS

FCC ID: OVFKWC-KX160B Label Information Page 1 of 1 Model: KX160B Exhibit 6: OVFKWC-KX160B ID Label Label Format Label Location FCC ID: OVFKWC-KX160B LABEL LOCATION

FCC ID: OVFKWC-KX160B Internal Photos Page 1 of 4 Model: KX160B Exhibit 8: OVFKWC-KX160B Internal Photos Bluetooth Antenna FCC ID: OVFKWC-KX160B Internal Photos Page 2 of 4 Model: KX160B Bluetooth Circuitry FCC ID: OVFKWC-KX160B Internal Photos Page 3 of 4 Model: KX160B FCC ID: OVFKWC-KX160B Internal Photos Page 4 of 4 Model: KX160B

FCC ID: OVFKWC-KX160B Kyocera Wireless Corp.Page 1 of 24Model: KX160B Test Report on Dual-Band Tri-mode AMPS/CDMA Cellular Phone with Bluetooth Certification FCC Part 15.247 IC RSS-210 FCC ID: OVFKWC-KX160B Models: KX160B STATEMENT OF CERTIFICATION The data, data evaluation and equipment configuration represented herein are a true and accurate representation of the measurements of the sample’s radio frequency interference emissions characteristics as of the dates and at the times of the test under the conditions herein specified. STATEMENT OF COMPLIANCE This product has been shown to be capable of compliance with the applicable technical standards as indicted in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C-63.4-2001. Date of Test: September 28-October 4, 2005 Test performed by: Kyocera Wireless Corp. 10300 Campus Point Drive San Diego, CA – 92121 Report Prepared by: Don Ouk, Engineer Report Reviewed by: Lin Lu, Principal Nemko USA, Inc. performed the tests that required an OATS site. FCC ID: OVFKWC-KX160B Kyocera Wireless Corp.Page 2 of 24Model: KX160B TABLE OF CONTENTS 1General Information ............................................................................................................................. 3 2Description of Bluetooth Transmitter ................................................................................................... 4 3Carrier Frequency Separation ............................................................................................................. 5 4Number of Hopping Frequencies......................................................................................................... 6 5Time of Occupancy (Dwell Time)......................................................................................................... 8 620 dB Bandwidth................................................................................................................................ 10 7Peak Output Power............................................................................................................................ 13 8Band-edge Compliance of Conducted Emissions............................................................................. 16 9Spurious RF Conducted Emissions ................................................................................................... 19 10 AC Power Line Conducted Emissions ............................................................................................... 24 11 Spurious Radiated Emissions............................................................................................................ 24 12 Test Equipment.................................................................................................................................. 24 FCC ID: OVFKWC-KX160B Kyocera Wireless Corp.Page 3 of 24Model: KX160B 1 General Information Applicant: Kyocera Wireless Corp 10300 Campus Point Drive San Diego CA 92121 ISS 129: OVFKWC-KX160B Product: Dual-Band Tri-mode Cellular Phone with Bluetooth Model Numbers: KX160B EUT Serial Number: A1DX----1CRSMC Type:[ ] Prototype, [X] Pre-Production, [ ] Production Equipment Category: Short Range Device TX Frequency (MHz): 2402 to 2480 Channel Number: 79 Channel Spacing (MHz): 1 Modulation: Frequency Hopping Spread Spectrum (FHHS) Max. Output Power (dBm) 3.5 Antenna: Internal Antenna Gain (dBi): 1.85 (Peak) IC Rule Parts: RSS 210 FCC ID: OVFKWC-KX160B Kyocera Wireless Corp.Page 4 of 24Model: KX160B 2 Description of Bluetooth Transmitter The OVFKWC-KX160B phones offer Bluetooth as a feature. The Bluetooth transmitter uses Frequency Hopping Spread Spectrum (FHSS) technique and operates in the 2400 – 2483 MHz band. The transmitter is a Class 2 Bluetooth device and designed to communicate with other Bluetooth devices as per the industrial standard. The maximum gain of the internal Bluetooth antenna is measured to be 1.85dBi. KX160B FCC ID: OVFKWC-KX160B Kyocera Wireless Corp.Page 5 of 24Model: KX160B 3 Carrier Frequency Separation FCC:§ 15.247 a1IC:RSS-210 §A8.1 (2) Measurement Procedure: The Bluetooth RF output port of the EUT was directly connected to the input of the spectrum analyzer with sufficient attenuation. Subsequently, the Bluetooth transmitter was set in hopping mode to investigate the carrier frequency separation between mid- channel and its adjacent channels. A fully charged battery was used as supply voltage. Frequencies of Interest: Spectrum was investigated from 2400 MHz – 2483.5 MHz. Figure 3. Carrier Frequency Separation between channels 38, 39 (mid-channel) & 40. Results and Limits: LimitsChannelResultsComments ≥ 25 kHz or 20 dB BW Hopping1.005MHz Carrier frequency separation between channels 38 and 39. FCC ID: OVFKWC-KX160B Kyocera Wireless Corp.Page 6 of 24Model: KX160B 4 Number of Hopping Frequencies FCC:§ 15.247 a1 iiiIC:RSS-210 §A8.1 (4) Measurement Procedure: The Bluetooth RF output port of the EUT was directly connected to the input of the spectrum analyzer with sufficient attenuation. Subsequently, the Bluetooth transmitter was set in hopping mode to investigate the number of hopping frequencies. A fully charged battery was used as supply voltage. Frequencies of Interest: Spectrum was investigated from 2400 MHz – 2483.5 MHz. List of Figures: FigureChannelPlot Description 4aNumber of Hopping Frequencies (Channels 0-39) 4b Hopping Number of Hopping Frequencies (Channels 39-78) Figure 4a. Number of Hopping Frequencies (Channels 0-39). FCC ID: OVFKWC-KX160B Kyocera Wireless Corp.Page 7 of 24Model: KX160B Figure 4b. Number of Hopping Frequencies (Channels 39-78). Results and Limits: LimitsChannelResultsComments At least 15 non- overlapping channels Hopping 79 (Channels 0-78) Complies FCC ID: OVFKWC-KX160B Kyocera Wireless Corp.Page 8 of 24Model: KX160B 5 Time of Occupancy (Dwell Time) FCC:§ 15.247 a1 ii, § 15.247 fIC:RSS-210 §A8.1 (4) Measurement Procedure: The Bluetooth RF output port of the …

Text truncated - open the document above for the full version.

Nemko USA, Inc 11696 Sorrento Valley Rd., Suite F San Diego, CA 92121-1024 EMC TEST REPORT Kyocera Wireless Corp. Cellular Phone Model: KX160B RADIATED AND CONDUCTED EMISSIONS FCC, PART 15.247 RSS 210 T EST REPORT # 2005 090862 KX160B 15.247 25-862-KYO N EMKO USA, INC. 11696 SORRENTO VALLEY ROAD SUITE F S AN DIEGO, CA 92121 P HONE: 858-755-5525 Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 DATE DOCUMENT NAME DOCUMENT # PAGE September 30, 2005 Kyocera Wireless Corp. KX160B EMC Test Report 2005 090862 KX160B 15.247 2 Of 35 TABLE OF CONTENTS 1.DESCRIPTION OF TEST SITE AND EQUIPMENT.........................................................7 2.DESCRIPTION OF TESTING METHODS.........................................................................7 3.T EST RESULTS.....................................................................................................................15 TEST SETUP DIAGRAMS F IGURE 1. GENERAL EUT TEST SETUP DIAGRAM..................................................................8 FIGURE 2. CONDUCTED EMISSIONS TEST SETUP DIAGRAM..................................................12 F IGURE 3. RADIATED EMISSIONS TEST SETUP DIAGRAM......................................................14 TEST CONFIGURATION PHOTOGRAPHS P HOTOGRAPH 1. FRONT VIEW OF EUT ...................................................................................9 PHOTOGRAPH 2. EUT CHARGER..........................................................................................10 P HOTOGRAPH 3. CONDUCTED EMISSIONS TEST CONFIGURATION..........................................20 PHOTOGRAPH 4. RADIATED EMISSIONS TEST CONFIGURATION.............................................21 PHOTOGRAPH 5. FUNDAMENTAL RADIATED EMISSIONS TEST CONFIGURATION....................24 APPENDICES A. RADIATED EMISSIONS MEASUREMENT UNCERTAINTIES................................................................................27 B. NEMKO USA, INC.’S TEST EQUIPMENT & FACILITIES CALIBRATION PROGRAM............................................29 C. FCC AND NVLAP ACCREDITATION..............................................................................................................31 Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 DATE DOCUMENT NAME DOCUMENT # PAGE September 30, 2005 Kyocera Wireless Corp. KX160B EMC Test Report 2005 090862 KX160B 15.247 3 Of 35 EMC Test Report For Kyocera Wireless Corp. Test Number : 25-862-KYO Product Name : Cellular Phone Regulation : FCC, Part 15.247 : RSS 210 : Date : September 12, 2005 Report Reviewed Accepted by: _____________________________ Kyocera Wireless Corp. 10300 Campus Point Drive San Diego, CA 92121 Phone: 858-882-3945 Fax: 858-882-3707 Report Issued By: ___ F. R. Fleury ____________ F. R. Fleury Tested By: __ Mike Krumweide EMC Test Engineer Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 DATE DOCUMENT NAME DOCUMENT # PAGE September 30, 2005 Kyocera Wireless Corp. KX160B EMC Test Report 2005 090862 KX160B 15.247 4 Of 35 Administrative Data Regulation : FCC, Part 15B : Canada, ICES-003 : Level : Class B Test Method : ANSI C63.4 – 2003 : CSA C108. - M1983 : Test Type : Certification Manufacturer : Kyocera Wireless Corp. EUT /:Model # : Cellular Phone / KX160B Date(s) of Test : August 26, 2005 and September 6, 2005 Customer Personnel : John Turner, Engineer Nemko Personnel : R. Hill, Senior EMC Engineer : Mike Krumweide, EMC Test Engineer Test Location : OPEN Area Test Site Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F San Diego, CA 92121 Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 DATE DOCUMENT NAME DOCUMENT # PAGE September 30, 2005 Kyocera Wireless Corp. KX160B EMC Test Report 2005 090862 KX160B 15.247 5 Of 35 EUT Description The KX160B is a Cellular Phone with Bluetooth capabilities. Its function is to provide communication for mobile phone users. The EUT was exercised in Bluetooth Transmit mode for Conducted and Radiated Emissions measurements. DEVICE MANUFACTURER MODEL # SERIAL # POWER CABLE EUT - Cellular Phone Kyocera Wireless Corp. Model: KX160B SN: A1DX----1CSC0X N/A EUT – Battery Charger Travel Charger TXACA10004 N/A N/A CONNECTION I/O CABLE Battery Charger to Cell Phone 2m, unshielded, 22AWG, 2wire, DC jack – Wall mount. REASON FOR TEST: The EUT was tested to establish compliance. CHANGES MADE DURING TEST The following design modifications were made to the EUT during testing. No design modifications were made to the EUT during testing. DEVIATIONS FROM STANDARD TEST METHOD None Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 DATE DOCUMENT NAME DOCUMENT # PAGE September 30, 2005 Kyocera Wireless Corp. KX160B EMC Test Report 2005 090862 KX160B 15.247 6 Of 35 CERTIFICATION AND TEST SUMMARY Test Type In Accordance with Document Frequency Range Investigated EUT Complies Conducted Emissions FCC 15 B Sec.207 Class “B” 150 kHz to 30 MHz Pass Radiated Emissions FCC 15 B Sec.209 Class “B” 30 MHz to 1000 MHz Pass Radiated Emissions FCC 15 C Sec. 247 2.4GHz to 24.0 GHz Pass The Cellular Phone complied with FCC, P ART 15B and CANADA, ICES-003, when tested in the system configuration defined herein. Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 DATE DOCUMENT NAME DOCUMENT # PAGE September 30, 2005 Kyocera Wireless Corp. KX160B EMC Test Report 2005 090862 KX160B 15.247 7 Of 35 1. DESCRIPTION OF TEST SITE AND EQUIPMENT 1.1. Description of Test Site The test site is located at 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121. The site is physically located 18 miles Northwest of downtown San Diego. The general area is a valley 1.5 miles east of the Pacific Ocean. This particular part of the val…

Text truncated - open the document above for the full version.