OVFKWC-KX2Dual Band Trimode AMPS/CDMA Cellular Phone

Draft Copy Draft Copy User Guide for the Kyocera Koi Phone This manual is based on the production version of the Kyocera Koi phone. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents: 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 5,193,094 5,228,054 5,257,283 5,265,119 5,267,261 5,267,262 5,280,472 5,283,536 5,289,527 5,307,405 5,309,474 5,337,338 5,339,046 5,341,456 5,383,219 5,392,287 5,396,516 D356,560 5,408,697 5,414,728 5,414,796 5,416,797 5,426,392 5,437,055 D361,065 5,442,322 5,442,627 5,452,473 5,461,639 5,469,115 5,469,471 5,471,497 5,475,870 5,479,475 5,483,696 5,485,486 5,487,175 5,490,165 5,497,395 5,499,280 5,504,773 5,506,865 5,509,015 5,509,035 5,511,067 5,511,073 5,513,176 5,515,177 5,517,323 5,519,761 5,528,593 5,530,928 5,533,011 5,535,239 5,539,531 5,544,196 5,544,223 5,546,459 5,548,812 5,559,881 5,559,865 5,561,618 5,564,083 5,566,000 5,566,206 5,566,357 5,568,483 5,574,773 5,574,987 D375,740 5,576,662 5,577,022 5,577,265 D375,937 5,588,043 D376,804 5,589,756 5,590,069 5,590,406 5,590,408 5,592,548 5,594,718 5,596,570 5,600,754 5,602,834 5,602,833 5,603,096 5,604,459 5,604,730 5,608,722 5,614,806 5,617,060 5,621,752 5,621,784 5,621,853 5,625,876 5,627,857 5,629,955 5,629,975 5,638,412 5,640,414 5,642,398 5,644,591 5,644,596 5,646,991 5,652,814 5,654,979 5,655,220 5,657,420 5,659,569 5,663,807 5,666,122 5,673,259 5,675,581 5,675,644 5,680,395 5,687,229 D386,186 5,689,557 5,691,974 5,692,006 5,696,468 5,697,055 5,703,902 5,704,001 5,708,448 5,710,521 5,710,758 5,710,768 5,710,784 5,715,236 5,715,526 5,722,044 5,722,053 5,722,061 5,722,063 5,724,385 5,727,123 5,729,540 5,732,134 5,732,341 5,734,716 5,737,687 5,737,708 5,742,734 D393,856 5,748,104 5,751,725 5,751,761 5,751,901 5,754,533 5,754,542 5,754,733 5,757,767 5,757,858 5,758,266 5,761,204 5,764,687 5,774,496 5,777,990 5,778,024 5,778,338 5,781,543 5,781,856 5,781,867 5,784,406 5,784,532 5,790,589 5,790,632 5,793,338 D397,110 5,799,005 5,799,254 5,802,105 5,805,648 5,805,843 5,812,036 5,812,094 5,812,097 5,812,538 5,812,607 5,812,651 5,812,938 5,818,871 5,822,318 5,825,253 5,828,348 5,828,661 5,835,065 5,835,847 5,839,052 5,841,806 5,842,124 5,844,784 5,844,885 5,844,899 5,844,985 5,848,063 5,848,099 5,850,612 5,852,421 5,854,565 5,854,786 5,857,147 5,859,612 5,859,838 5,859,840 5,861,844 5,862,471 5,862,474 5,864,760 5,864,763 5,867,527 5,867,763 5,870,427 5,870,431 5,870,674 5,872,481 5,872,774 5,872,775 5,872,823 5,877,942 5,878,036 5,870,631 5,881,053 5,881,368 5,884,157 5,884,193 5,884,196 5,892,178 5,892,758 5,892,774 5,892,816 5,892,916 5,893,035 D407,701 5,898,920 5,903,554 5,903,862 D409,561 5,907,167 5,909,434 5,910,752 5,911,128 5,912,882 D410,893 5,914,950 5,915,235 5,917,708 5,917,811 5,917,812 5,917,837 5,920,284 D411,823 5,923,650 5,923,705 5,926,143 5,926,470 5,926,500 5,926,786 5,930,230 5,930,692 Other patents pending. Kyocera is a registered trademark of Kyocera Corporation. Doodler, and Race 21 are trademarks of Kyocera Wireless Corp. Tetris is a registered trademark of Elorg Company LLC. QUALCOMM is a registered trademark of QUALCOMM, Inc. Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. All other trademarks are the property of their respective owners. Copyright © 2003 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2002 Kyocera Wireless Corp. 82-K5570-1EN, Rev X5 FCC/IC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Wireless Corp. (KWC) supplied and approved case CA90-61296-01 and holster CV90-L8010-01. Other accessories used with this device for body- worn operations must not contain any metallic components and must provide at least 25 mm separation distance including the antenna and the user’s body. THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit establishe…

Text truncated - open the document above for the full version.

Draft Copy Draft Copy User Guide for the Kyocera Koi Phone This manual is based on the production version of the Kyocera Koi phone. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents: 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 5,193,094 5,228,054 5,257,283 5,265,119 5,267,261 5,267,262 5,280,472 5,283,536 5,289,527 5,307,405 5,309,474 5,337,338 5,339,046 5,341,456 5,383,219 5,392,287 5,396,516 D356,560 5,408,697 5,414,728 5,414,796 5,416,797 5,426,392 5,437,055 D361,065 5,442,322 5,442,627 5,452,473 5,461,639 5,469,115 5,469,471 5,471,497 5,475,870 5,479,475 5,483,696 5,485,486 5,487,175 5,490,165 5,497,395 5,499,280 5,504,773 5,506,865 5,509,015 5,509,035 5,511,067 5,511,073 5,513,176 5,515,177 5,517,323 5,519,761 5,528,593 5,530,928 5,533,011 5,535,239 5,539,531 5,544,196 5,544,223 5,546,459 5,548,812 5,559,881 5,559,865 5,561,618 5,564,083 5,566,000 5,566,206 5,566,357 5,568,483 5,574,773 5,574,987 D375,740 5,576,662 5,577,022 5,577,265 D375,937 5,588,043 D376,804 5,589,756 5,590,069 5,590,406 5,590,408 5,592,548 5,594,718 5,596,570 5,600,754 5,602,834 5,602,833 5,603,096 5,604,459 5,604,730 5,608,722 5,614,806 5,617,060 5,621,752 5,621,784 5,621,853 5,625,876 5,627,857 5,629,955 5,629,975 5,638,412 5,640,414 5,642,398 5,644,591 5,644,596 5,646,991 5,652,814 5,654,979 5,655,220 5,657,420 5,659,569 5,663,807 5,666,122 5,673,259 5,675,581 5,675,644 5,680,395 5,687,229 D386,186 5,689,557 5,691,974 5,692,006 5,696,468 5,697,055 5,703,902 5,704,001 5,708,448 5,710,521 5,710,758 5,710,768 5,710,784 5,715,236 5,715,526 5,722,044 5,722,053 5,722,061 5,722,063 5,724,385 5,727,123 5,729,540 5,732,134 5,732,341 5,734,716 5,737,687 5,737,708 5,742,734 D393,856 5,748,104 5,751,725 5,751,761 5,751,901 5,754,533 5,754,542 5,754,733 5,757,767 5,757,858 5,758,266 5,761,204 5,764,687 5,774,496 5,777,990 5,778,024 5,778,338 5,781,543 5,781,856 5,781,867 5,784,406 5,784,532 5,790,589 5,790,632 5,793,338 D397,110 5,799,005 5,799,254 5,802,105 5,805,648 5,805,843 5,812,036 5,812,094 5,812,097 5,812,538 5,812,607 5,812,651 5,812,938 5,818,871 5,822,318 5,825,253 5,828,348 5,828,661 5,835,065 5,835,847 5,839,052 5,841,806 5,842,124 5,844,784 5,844,885 5,844,899 5,844,985 5,848,063 5,848,099 5,850,612 5,852,421 5,854,565 5,854,786 5,857,147 5,859,612 5,859,838 5,859,840 5,861,844 5,862,471 5,862,474 5,864,760 5,864,763 5,867,527 5,867,763 5,870,427 5,870,431 5,870,674 5,872,481 5,872,774 5,872,775 5,872,823 5,877,942 5,878,036 5,870,631 5,881,053 5,881,368 5,884,157 5,884,193 5,884,196 5,892,178 5,892,758 5,892,774 5,892,816 5,892,916 5,893,035 D407,701 5,898,920 5,903,554 5,903,862 D409,561 5,907,167 5,909,434 5,910,752 5,911,128 5,912,882 D410,893 5,914,950 5,915,235 5,917,708 5,917,811 5,917,812 5,917,837 5,920,284 D411,823 5,923,650 5,923,705 5,926,143 5,926,470 5,926,500 5,926,786 5,930,230 5,930,692 Other patents pending. Kyocera is a registered trademark of Kyocera Corporation. Doodler, and Race 21 are trademarks of Kyocera Wireless Corp. Tetris is a registered trademark of Elorg Company LLC. QUALCOMM is a registered trademark of QUALCOMM, Inc. Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. All other trademarks are the property of their respective owners. Copyright © 2003 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2002 Kyocera Wireless Corp. 82-K5570-1EN, Rev X5 FCC/IC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Wireless Corp. (KWC) supplied and approved case CA90-61296-01 and holster CV90-L8010-01. Other accessories used with this device for body- worn operations must not contain any metallic components and must provide at least 25 mm separation distance including the antenna and the user’s body. THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit establishe…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-KX2 Kyocera Wireless Corp. 1 December 19, 2003 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re:Application for Cellular and PCS Transceiver Type Acceptance Kyocera Wireless Corporation (KWC) herein submits the Application for Equipment Authorization (FCC Form 731) and Exhibits for Type Acceptance of a Cellular & PCS Transceiver, FCC ID: OVFKWC-KX2. Applicant:Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, CA 92121-1522 Manufacture:Kyocera Wireless Corporation 10300 Campus Point Drive San Diego, California 92121 The equipment, KWC model # KX2, is for mobile station cellular and PCS system use. The KX2 is in full compliance with all parts of EIA/TIA/IS-98-B&D Mobile Station-Land Station Compatibility Specification, issue July 2000 and March 2001, and also in full compliance with all parts of ANSI J-STD-018, Recommended Minimum Performance Requirements for 1.8 to 2 GHz Code Division Multiple Access (CDMA) Personal Stations, issue July 1996. The KX2 has E911 Phase II GPS capability. Information concerning how the ESN protection requirements are met is provided in Part 22_24 report. Please contact me at Tel: (858) 882-2548 or Email: [email protected], if there are any questions or additional information needed. Sincerely, Vijay Parpia Vijay Parpia Engineer, Senior Kyocera Wireless Corporation

FCC ID: OVFKWC-KX2 Kyocera Wireless Corp. 1 December 19, 2003 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re:Request of Confidentiality for FCC ID: OVFKWC-KX2 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Kyocera Wireless Corp hereby requests confidential treatment of information accompanying this Application as outlined below: ExhibitDescription 1Operation Descriptions 2Block diagrams 3Schematics 4Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Vijay Parpia Vijay Parpia Engineer, Senior Kyocera Wireless Corporation

This document was generated in response to a request for additional technical information by Diane Poole in regards to the type approval of the KX2. The information included is related to a specific topic discussed in the following email received by Vijay Parpia Feb. 13, 2004: At 11:22 AM 2/13/2004 -0500, Diane Poole wrote: To: Vijay Parpia, Kyocera Wireless Corp From: Diane Poole [email protected] FCC Application Processing Branch Re: FCC ID OVFKWC-KX2 Applicant: Kyocera Wireless Corp Correspondence Reference Number: 26357 731 Confirmation Number: EA989915 1) Please justify use of the probes. Calibration documents could not be located for the frequency tested at. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 60 days of the original e-mail date may result in application dismissal pursuant to Section 2.917 (c) and forfeiture of the filing fee pursuant to section 1.1108. DO NOT reply to this e-mail by using the Reply button. In order for your response to be processed expeditiously, you must upload your response via the Internet at www.fcc.gov , Electronic Filing, OET Equipment Authorization Electronic Filing. If the response is submitted through Add Attachments, in order to expedite processing, a message which informs the processing staff that a new exhibit has been submitted must also be submitted via Submit Correspondence. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. 1) Please justify use of the probes. Calibration documents could not be located for the frequency tested at. The probe calibration parameter document (file name: Appendix C_Probe.pdf) was missing the dipole calibration parameter information. The dipoles used for system validation were: a) for 1900 MHz – type : D1900V2, Serial # : 5d003 b) for 800 MHz – type : D835V2, serial # : 453 I am uploading the pdf document (file name: Appendix C_1 Dipole.pdf) that contains dipole calibration parameter.

FCC ID: OVFKWC-KX2 Exhibit 7_External Photos.docPage 1 of 3 Exhibit 7: External Photos Front (Swivel Closed & Antenna Retracted) Side View 1 (Swivel Closed & Antenna Retracted) Side View 2 (Swivel Closed & Antenna Retracted) FCC ID: OVFKWC-KX2 Exhibit 7_External Photos.docPage 2 of 3 Back (Swivel Closed , Antenna Retracted & Camera Slide Closed) Front (Swivel Open & Antenna Extended) Back (Swivel Open, Antenna Extended & Camera Slide Open) FCC ID: OVFKWC-KX2 Exhibit 7_External Photos.docPage 3 of 3 Connector

FCC ID: OVFKWC-KX2 Exhibit 7_External Photos.docPage 1 of 3 Exhibit 7: External Photos Front (Swivel Closed & Antenna Retracted) Side View 1 (Swivel Closed & Antenna Retracted) Side View 2 (Swivel Closed & Antenna Retracted) FCC ID: OVFKWC-KX2 Exhibit 7_External Photos.docPage 2 of 3 Back (Swivel Closed , Antenna Retracted & Camera Slide Closed) Front (Swivel Open & Antenna Extended) Back (Swivel Open, Antenna Extended & Camera Slide Open) FCC ID: OVFKWC-KX2 Exhibit 7_External Photos.docPage 3 of 3 Connector

FCC ID: OVFKWC-KX2 Exhibit 6_Label Infomation.docPage 1 of 1 Exhibit 6: FCC Label Information 1 Label Format FCC ID will be located in area “F” as shown below: 2 Label Location FCC ID : OVFKWC-KX2

FCC ID: OVFKWC-KX2 Exhibit 6_Label Infomation.docPage 1 of 1 Exhibit 6: FCC Label Information 1 Label Format FCC ID will be located in area “F” as shown below: 2 Label Location FCC ID : OVFKWC-KX2

FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 1 of 4 Exhibit 8: Internal Photos Front & Back Housing FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 2 of 4 Main PCB_A Main PCB_B Main PCB_B without Shield & Camera FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 3 of 4 Keyboard & Main Shield Front & Back Camera Module FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 4 of 4 Front & Back LCD & Harness Cable Audio Board & Keypad FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 5 of 4

FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 1 of 4 Exhibit 8: Internal Photos Front & Back Housing FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 2 of 4 Main PCB_A Main PCB_B Main PCB_B without Shield & Camera FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 3 of 4 Keyboard & Main Shield Front & Back Camera Module FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 4 of 4 Front & Back LCD & Harness Cable Audio Board & Keypad FCC ID: OVFKWC-KX2 Exhibit 8_Internal Photos.docPage 5 of 4

FCC ID:OVFKWC-KX2 SAR Test Report On Dual-Band Tri-mode AMPS/CDMA Cellular Phone FCC Part 22 & 24 Certification FCC ID: OVFKWC-KX2 Model: KX2 Original Grant Dates: STATEMENT OF COMPLIANCE Kyocera Wireless Corp declares under its sole responsibility that the product, FCC ID: OVFKWC- KX2 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted: NONE. Date of Test:December 4-12, 2003 Test performed by:Kyocera Wireless Corp 10300 Campus Point Drive CA 92121 Report Prepared by:Vijay Parpia, Engineer, Senior FCC ID:OVFKWC-KX2 Table of Contents 1INTRODUCTION................................................................................................................................................................ 3 2EQUIPMENT UNDER TEST (EUT) ................................................................................................................................. 3 3SAR TEST RESULT SUMMARY ..................................................................................................................................... 5 3.1M AXIMUM RESULTS FOUND DURING SAR EVALUATION................................................................................................ 5 3.2H EAD CONFIGURATION................................................................................................................................................... 5 3.3B ODY WORN CONFIGURATION (WITH KWC BODY WORN ACCESSORIES) ....................................................................... 6 3.4M EASUREMENT UNCERTAINTY....................................................................................................................................... 6 4TEST CONDITIONS........................................................................................................................................................... 7 4.1A MBIENT CONDITIONS.................................................................................................................................................... 7 4.2RF CHARACTERISTICS OF THE TEST SITE......................................................................................................................... 7 4.3T EST SIGNAL, FREQUENCIES AND OUTPUT POWER......................................................................................................... 7 4.4D EVICE TEST CONDITIONS.............................................................................................................................................. 7 5DESCRIPTION OF THE TEST EQUIPMENT ............................................................................................................... 8 5.1D OSIMETRIC SYSTEM...................................................................................................................................................... 8 5.2A DDITIONAL EQUIPMENT NEEDED IN VALIDATION.......................................................................................................... 8 5.3T ISSUE STIMULANTS....................................................................................................................................................... 8 5.4P HANTOMS DESCRIPTION................................................................................................................................................ 9 5.5I SOTROPIC E-FIELD PROBE.............................................................................................................................................. 9 6SYSTEM VALIDATION .................................................................................................................................................. 10 7DESCRIPTION OF THE TEST PROCEDURE............................................................................................................. 11 7.1T EST POSITIONS............................................................................................................................................................ 11 7.1.1Initial Ear Position............................................................................................................................................... 11 7.1.2Cheek Position...................................................................................................................................................... 12 7.1.3Tilt Position .......................................................................................................................................................... 12 7.1.4Body Worn Configuration .................................................................................................................................... 13 7.2S CAN PROCEDURES....................................................................................................................................................... 13 7.3SAR A VERAGING METHODS......................................................................................................................................... 13 8MEASUREMENT UNCERTAINTY ............................................................................................................................... 14 9TEST DATA ....................................................................................................................................................................... 15 9.1H EAD SAR TEST RESULTS............................................................................................................................................ 15 9.2B ODY WORN SAR TEST RESULT................................................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 1 of 11 APPENDIX A: Validation Plots For Model KX2 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 2 of 11 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 3 of 11 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 4 of 11 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 5 of 11 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 6 of 11 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 7 of 11 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 8 of 11 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 9 of 11 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 10 of 11 FCC ID: OVFKWC-KX2 Appendix A Validation plots.docPage 11 of 11

FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 1 of 19 APPENDIX B: SAR Distribution Plots For Model KX2 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 2 of 19 Section 1 SAR Distribution plots for Head Adjacent Use Configuration (AMPS 800) FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 3 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 4 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 5 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 6 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 7 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 8 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 9 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 10 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 11 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 12 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 13 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 14 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 15 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 16 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 17 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 18 of 19 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt1.docPage 19 of 19

FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 1 of 18 APPENDIX B: SAR Distribution Plots For Model KX2 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 2 of 18 Section 1 SAR Distribution plots for Head Adjacent Use Configuration (CDMA 800) FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 3 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 4 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 5 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 6 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 7 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 8 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 9 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 10 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 11 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 12 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 13 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 14 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 15 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 16 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 17 of 18 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt2.docPage 18 of 18

FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 1 of 20 APPENDIX B: SAR Distribution Plots For Model KX2 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 2 of 20 Section 1 SAR Distribution plots for Head Configuration (PCS) FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 3 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 4 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 5 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 6 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 7 of 20 KX2 # 4G7T, CDMA 1900 CH.600, Closed Left Tilt, Extended Battery, Antenna Retracted FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 8 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 9 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 10 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 11 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 12 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 13 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 14 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 15 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 16 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 17 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 18 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 19 of 20 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt3.docPage 20 of 20

FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt4.docPage 1 of 24 APPENDIX B: SAR Distribution Plots For Model KX2 FCC ID: OVFKWC-KX2 Appendix B SAR plots_ pt4.docPage 2 of 24 Section 2 SAR Distribution plots for…

Text truncated - open the document above for the full version.