P5FIBC233Bluetooth CD/Radio Boombox

For Warranty Information and the most up‐to‐date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1‐888‐999‐4215 Email Support: [email protected], Email Parts: [email protected] Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. IBC233 Bluetooth Boombox IMPORTANT SAFETY INSTRUCTIONS 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding ‐ type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip‐over. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power‐supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For Warranty Information and the most up‐to‐date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1‐888‐999‐4215 Email Support: [email protected], Email Parts: [email protected] Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. FCC STATEMENT: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Additional Warnings ‐ The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet. For Warranty Information and the most up‐to‐date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1‐888‐999‐4215 Email Support: [email protected], Email Parts: [email protected] Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. ‐ Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur. ‐ Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres choses de semblable. ‐ Caution marking is located at the rear or bottom of the apparatus. Attention marquage est situé sur le paneau arrière ou inférieur de l’unité. ‐ The marking information is located at the r…

Text truncated - open the document above for the full version.

1 Hopping Range Hereby we declare that the maximum range frequency of this device is: 2402-2408MHz. This is according the Bluetooth core Specification BT 3.0 for device which will be operated in the USA 2 Hopping Sequence Example of a 79 hopping sequence in data mode: 35,14,22,44,23,42,53,46,55,48,40,59,72,29,76,31,08,73, 07,65,09,45,60,39,58,13,47,11,77,52,35,50,65,54,67,56, 69,62,71,64,37,25,27,66,57,70,24,61,78,63,10,41,06,43, 19,43,64,68,02,71,06,01,51,03,55,05,03,66,53,49,26,46 3 Receiver input bandwidth The input bandwidth of the receiver is 1MHz. It employs 1600 hoppings per second, In every connection one Bluetooth device is the master and the other one is the slave. The ma ster determines the hopping sequence. The slave follows this sequence. Both devices shift between RX and TX time slot according to the clock of the master. Additionally the type of connection is set up at the beginning of the connection. The master adapts its ho pping frequency and its TX/RX timing according to the packet type of the connection. Also the slave of the connection will use these settings. Repeating of a packer has no influence on the hopping sequence. The hopping sequence generated by the master of the connection will be followed in any case. That means a repeated packet will not be send on the same frequency, it is send on the frequency of the hopping sequence. FCC ID: P5FIBC233

Digital Gallery Global Limited April 7, 2013 To: SIEMIC, INC. 775 Montague Expressway Milpitas , CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We , Digital Gallery Global Limited hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product Description: Bluetooth CD/Radio Boombox Model name: IBC233, IBC233B, IBC233S FCC ID: P5FIBC233 We affirm that between SIEMIC and Digital Gallery Global Limited , any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature: Client’s name / title: Will Pang Contact information / address: Flat A, 12/F, World Tech Centre, 95 How Ming Stree, Hong Kong, Hong Kong

SCS-F19: Confidentiality Request Letter Page 1 of 1 Rev 2.0 Digital Gallery Global Limited April 7, 2013 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: P5FIBC233 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Operational Description - Schematic The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Client’s signature: Client’s name / title: Will Pang Contact information / address: Flat A, 12/F, World Tech Centre, 95 How Ming Stree, Hong Kong, Hong Kong

Digital Gallery Global Limited Date: April 7, 2013 To SIEMIC In c 775 Montague Expressway Milpitas, CA 95035 Statement Model number: IBC233, IBC233B, IBC233S We hereby state that these models are identical in interior structure, electrical circuits and components, and just appearance color is different for the marketing requirement. Your assistance on this matter is highly appreciated. Sincerely, Client’s signature: Client’s name / title: Will Pang Contact information / address: Flat A, 12/F, World Tech Centre, 95 How Ming Stree, Hong Kong, Hong Kong

FCC Certification label Sample FCC ID: P5FIBC233 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Antenna Antenna

FCC ID : P5FIBC233 1. RF EXPOSURE 1.1. The Requirement System operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See Section 15.247(b)(4) and Section 1.1307(b)(1) 1.2. Limit For Maximum Permissible Exposure (MPE) Limits for General Population/ Uncontrolled Exposure F = frequency in MHz, * Plane-wave equivalent power density 1.3. MPE Calculations E(V/m) = 30 P G d  , Power Density: S( 2 mW/cm) = 2 377 E Where E = Electric Field (V/m) P = Peak Output Power (mW) Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) ( 2 mW/cm) Averaging Time 2 E, 2 H or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 f/1500 30 1500-100,000 1.0 30 G = Antenna Numeric Gain (numeric) = 10 x , x = Antenna Gain(dBi) /10 d = Separation Distance (cm) We can change the formula to: S = 2 30 377 PG d   or, d = 30 377 PG S   Because the EUT is belong to general population/uncontrolled exposure. So 1.3.1. We considering the limit of minimum separation distance (d) is 20cm, Maximum Output Power = 1.211 Antenna Gain = 0(dBi) = 1.00(numeric) S = 2 30 377 PG d   = 2.4*10 -4 < 1.0 2 mW/cm (limit) Calculated RF Exposure power density is 2.4*10 -4 2 mW/cm , less than the limit. 1.3.2. We considering the limit of power density (S) is 1.0 2 mW/cm , Maximum Output Power =1.211 Antenna Gain = 0(dBi) =1.00 (numeric) d = 30 377 PG S   = 0.31< 20 cm Calculated RF Exposure separation distance is 0.31 less than the minimum separation distance 1.3.3.FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm(8 inches) during normal operation. Proposed RF exposure safety information to include in User’s Manual.

Page 1 of 176 FCC ID: P5FIBC233 ACCURATE TECHNOLOGY CO. LTD Report No.: ATE20130326 APPLICATION CERTIFICATION On Behalf of Digital Gallery Global Limited Bluetooth CD/Radio Boombox Model No.: IBC233, IBC233B, IBC233S FCC ID: P5FIBC233 Prepared for : Digital Gallery Global Limited Address : Flat A, 12/F, World Tech Centre, 95 How Ming Stree, Hong Kong Prepared by : ACCURATE TECHNOLOGY CO. LTD Address : F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report Number : ATE20130326 Date of Test : March 5-April 7, 2013 Date of Report : April 8, 2013 Page 2 of 176 FCC ID: P5FIBC233 ACCURATE TECHNOLOGY CO. LTD Report No.: ATE20130326 TABLE OF CONTENTS Description Page Test Report Certification 1. GENERAL INFORMATION .......................................................................................................... 5 1.1. Description of Device (EUT)....................................................................................................................5 1.2. Special Accessory and Auxiliary Equipment ...........................................................................................5 1.3. Description of Test Facility ......................................................................................................................6 1.4. Measurement Uncertainty.........................................................................................................................6 2. MEASURING DEVICE AND TEST EQUIPMENT ..................................................................... 7 3. OPERATION OF EUT DURING TESTING ................................................................................. 8 3.1. Operating Mode ........................................................................................................................................8 3.2. Configuration and peripherals ..................................................................................................................8 4. TEST PROCEDURES AND RESULTS ......................................................................................... 9 5. 20DB BANDWIDTH TEST............................................................................................................ 10 5.1. Block Diagram of Test Setup..................................................................................................................10 5.2. The Requirement For Section 15.247(a)(1) ............................................................................................10 5.3. EUT Configuration on Measurement .....................................................................................................10 5.4. Operating Condition of EUT ..................................................................................................................10 5.5. Test Procedure ........................................................................................................................................11 5.6. Test Result ..............................................................................................................................................11 6. CARRIER FREQUENCY SEPARATION TEST........................................................................ 22 6.1. Block Diagram of Test Setup..................................................................................................................22 6.2. The Requirement For Section 15.247(a)(1) ............................................................................................22 6.3. EUT Configuration on Measurement .....................................................................................................22 6.4. Operating Condition of EUT ..................................................................................................................22 6.5. Test Procedure ........................................................................................................................................23 6.6. Test Result ..............................................................................................................................................23 7. NUMBER OF HOPPING FREQUENCY TEST ......................................................................... 34 7.1. Block Diagram of Test Setup..................................................................................................................34 7.2. The Requirement For Section 15.247(a)(1)(iii) ......................................................................................34 7.3. EUT Configuration on Measurement .....................................................................................................34 7.4. Operating Condition of EUT ..................................................................................................................34 7.5. Test Procedure ........................................................................................................................................35 7.6. Test Result ..............................................................................................................................................35 8. DWELL TIME TEST ..................................................................................................................... 39 8.1. Block Diagram of Test Setup..................................................................................................................39 8.2. The Requirement For Section 15.247(a)(1)(iii) ......................................................................................39 8.3. EUT Configuration on Measurement .....................................................................................................39 8.4. Operating Condition of EUT ..................................................................................................................39 8.5. Test Procedure .…

Text truncated - open the document above for the full version.

Page 101 of 176 FCC ID: P5FIBC233 ACCURATE TECHNOLOGY CO. LTD Report No.: ATE20130326 Date of Test: Mar. 27, 2013 Temperature: 25 o C EUT: Bluetooth CD/Radio Boombox Humidity: 50% Model No.: IBC233 Power Supply: AC 120V/60HZ Test Mode: TX (2480MHz) Test Engineer: Apple GFSK (1Mbps) Below 30MHz Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor(dB) Corr. QP QP QP Polarization - - - - - - X - - - - - - Y - - - - - - Z For 30MHz-1000MHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor Corr. (dB) QP QP QP Polarization - - - - - - Vertical - - - - - - Horizontal For 1GHz-25GHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading(dBV/m ) Result(dBV/m)Limit(dBV/m)Margin(dBV/m) Frequency (MHz) AV PEAK Factor Corr. (dB) AV PEAKAV PEAK AV PEAK Polarizati on - - - - - - - - - - Vertical - - - - - - - - - - Horizontal Note: 1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. *: Denotes restricted band of operation. 3. The fundamental radiated emissions were reduced by Band Reject Filter in the attached plots. Page 102 of 176 FCC ID: P5FIBC233 ACCURATE TECHNOLOGY CO. LTD Report No.: ATE20130326 Date of Test: Mar. 27, 2013 Temperature: 25 o C EUT: Bluetooth CD/Radio Boombox Humidity: 50% Model No.: IBC233 Power Supply: AC 120V/60HZ Test Mode: TX (2402MHz) Test Engineer: Apple π/4 DQPSK (2Mbps) Below 30MHz Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor(dB) Corr. QP QP QP Polarization - - - - - - X - - - - - - Y - - - - - - Z For 30MHz-1000MHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor Corr. (dB) QP QP QP Polarization - - - - - - Vertical - - - - - - Horizontal For 1GHz-25GHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading(dBV/m)Result(dBV/m)Limit(dBV/m)Margin(dBV/m) Frequenc y (MHz) AV PEAK Factor Corr. (dB) AV PEAKAV PEAK AV PEAK Polarizati on - - - - - - - - - - Vertical - - - - - - - - - - Horizontal Note: 1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. *: Denotes restricted band of operation. 3. The fundamental radiated emissions were reduced by Band Reject Filter in the attached plots. Page 103 of 176 FCC ID: P5FIBC233 ACCURATE TECHNOLOGY CO. LTD Report No.: ATE20130326 Date of Test: Mar. 27, 2013 Temperature: 25 o C EUT: Bluetooth CD/Radio Boombox Humidity: 50% Model No.: IBC233 Power Supply: AC 120V/60HZ Test Mode: TX (2441MHz) Test Engineer: Apple π/4 DQPSK (2Mbps) Below 30MHz Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor(dB) Corr. QP QP QP Polarization - - - - - - X - - - - - - Y - - - - - - Z For 30MHz-1000MHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor Corr. (dB) QP QP QP Polarization - - - - - - Vertical - - - - - - Horizontal For 1GHz-25GHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading(dBV/m)Result(dBV/m)Limit(dBV/m)Margin(dBV/m) Frequenc y (MHz) AV PEAK Factor Corr. (dB) AV PEAKAV PEAK AV PEAK Polarizati on - - - - - - - - - - Vertical - - - - - - - - - - Horizontal Note: 1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. *: Denotes restricted band of operation. 3. The fundamental radiated emissions were reduced by Band Reject Filter in the attached plots. Page 104 of 176 FCC ID: P5FIBC233 ACCURATE TECHNOLOGY CO. LTD Report No.: ATE20130326 Date of Test: Mar. 27, 2013 Temperature: 25 o C EUT: Bluetooth CD/Radio Boombox Humidity: 50% Model No.: IBC233 Power Supply: AC 120V/60HZ Test Mode: TX (2480MHz) Test Engineer: Apple π/4 DQPSK (2Mbps) Below 30MHz Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor(dB) Corr. QP QP QP Polarization - - - - - - X - - - - - - Y - - - - - - Z For 30MHz-1000MHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor Corr. (dB) QP QP QP Polarization - - - - - - Vertical - - - - - - Horizontal For 1GHz-25GHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading(dBV/m ) Result(dBV/m)Limit(dBV/m)Margin(dBV/m) Frequency (MHz) AV PEAK Factor Corr. (dB) AV PEAKAV PEAK AV PEAK Polarizati on - - - - - - - - - - Vertical - - - - - - - - - - Horizontal Note: 1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. *: Denotes restricted band of operation. 3. The fundamental radiated emissions were reduced by Band Reject Filter in the attached plots. Page 105 of 176 FCC ID: P5FIBC233 ACCURATE TECHNOLOGY CO. LTD Report No.: ATE20130326 Date of Test: Mar. 27, 2013 Temperature: 25 o C EUT: Bluetooth CD/Radio Boombox Humidity: 50% Model No.: IBC233 Power Supply: AC 120V/60HZ Test Mode: TX (2402MHz) Test Engineer: Apple 8DPSK (3Mbps) Below 30MHz Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor(dB) Corr. QP QP QP Polarization - - - - - - X - - - - - - Y - - - - - - Z For 30MHz-1000MHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading (dBV/m) Result (dBV/m) Limit (dBV/m) Margin (dB) Frequency (MHz) QP Factor Corr. (dB) QP QP QP Polarization - - - - - - Vertical - - - - - - Horizontal For 1GHz-25GHz Corrected Factor = Antenna Factor + Cable Loss – Amplifier Gain Reading(dBV/m)Result(dBV/m)Limit(dBV/m)Margin(dBV/m) Frequenc y (MHz) AV PEAK Factor Corr. (dB) AV PEAKAV PEAK AV PEAK Polarizati on - - - - - - - - - - Vertical - - - - - - - - - - Horizontal Note: 1. Emissions attenuated more than 20 dB below the permissible value are not reported. 2. *: Denotes restricted band of operation. 3. The fundamental radiated emissions …

Text truncated - open the document above for the full version.

Conducted emissions test Radiated emissions test < 30MHz Radiated emissions test 30MHz- 1GHz Radiated emissions test > 1GHz