P6I-COPYCAMCOPYCAM

Exhibit L: User Manual FCC ID: P6I-COPYCAM Part number 370-0111-01 ©2002 PolyVision Corporation All rights reserved Printed in USA User Guide Userguide_RevA_4.fm Page -1 Friday, January 18, 2002 11:07 AM Information in this document is subject to change without notice. Reproduction in any manner without written permission of PolyVision Corporation is forbidden. PolyVision Corporation reserves the right to make changes in product design, or detail, and to discontinue any product or material without notice. CopyCam is a trademark of PolyVision Corporation, a Steelcase Company. The Bluetooth trademarks are owned by Bluetooth SIG, Inc., USA. Userguide_RevA_4.fm Page 0 Friday, January 18, 2002 11:07 AM 1 TABLE OF CONTENTS Welcome to CopyCam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CopyCam Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What to Expect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CopyCam Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Three Ways to Make Copies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 What You Can Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 What You Can’t Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Copying to the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Copying to a Floppy Diskette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Copying to the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Copying in any Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 The CopyCam Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Accessing Your CopyCam Web Server. . . . . . . . . . . . . . . . . . . . . . . . 9 Using the Saved Shots Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Saving Copies to your Hard Disk. . . . . . . . . . . . . . . . . . . . . . . . . 11 Printing From the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Using the Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using the Camera Info Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Changing Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 CopyCam Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Camera Arm Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Web Site Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 LED and Voice Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . .26 LED Status Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Voice Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Userguide_RevA_4.fm Page 1 Friday, January 18, 2002 11:07 AM 2WELCOME TO COPYCAM WELCOME TO COPYCAM Welcome to CopyCam, your quick and easy tool to capture information from a whiteboard or chalkboard. This manual provides instructions for operating your CopyCam. Refer to the CopyCam Installation Guide for installation instructions. Camera arm Color printer Control pad with floppy drive Userguide_RevA_4.fm Page 2 Friday, January 18, 2002 11:07 AM COPYCAM QUICK START3 COPYCAM QUICK START Step 1: Write on the board. Step 2: Press a button on the control pad. Step 3: You’re done! CopyCam captures the board and you can continue your presentation without interruption. WHAT TO EXPECT In good lighting conditions, CopyCam captures the board just five seconds after you press one of the control pad buttons. In poor light, it might take a few seconds longer. NOTE:NOTE: To avoid shadows across the image, be sure you stand away from the board when you press the control pad button. A voice prompt quietly says “captured.” At the same time, the LED changes from blinking yellow to solid yellow to indicate that you can erase the board and continue writing. Refer to “LED and Voice Status Messages” on page 26 for a summary of all status messages. When you use the printer, it can take up to 45 seconds before a copy starts printing, but you can continue with your presentation during that time. When you use the floppy diskette, it can take up to a minute to save the file, but you can continue with your presentation during that time as well. Userguide_RevA_4.fm Page 3 Friday, January 18, 2002 11:07 AM 4COPYCAM OPERATION COPYCAM OPERATION THREE WAYS TO MAKE COPIES CopyCam gives you a choice of three ways to make copies of your whiteboard or chalkboard: •on the printer •on a floppy diskette •on the web You can use any combination to save copies during a presentation. Refer to “Copying in any Combination” on page 8. WHAT YOU CAN COPY CopyCam can copy writing and drawings in any color on whiteboards or chalkboards. You can use any chalk color or any marker color. You can even copy overhead projections if they use line art. CopyCam captures an area of up to 4' x 8' on a wall, whether or not there is a board there. WHAT YOU CAN’T COPY CopyCam will not produce a clean image from large blocks of solid color, photos, or 3D objects. COPYING TO THE PRINTER CopyCam comes with its own color printer. The color printer receives its data using Bluetooth wireless technology. (You can also configure CopyCam to use ethernet network printers. Refer to “Changing Printers” on page 18.) CopyCam emits radio si…

Text truncated - open the document above for the full version.

Exhibit X: Installation Guide FCC ID: P6I-COPYCAM Part Number 370-0112-01 ©2002 PolyVision Corporation All rights reserved Printed in the USA Installation Guide Installguide_RevA_4.fm Page -1 Friday, January 18, 2002 11:05 AM Information in this document is subject to change without notice. Reproduction in any manner without written permission of PolyVision Corporation is forbidden. PolyVision Corporation reserves the right to make changes in product design, or detail, and to discontinue any product or material without notice. CopyCam is a trademark of PolyVision Corporation, a Steelcase Company. The Bluetooth trademarks are owned by Bluetooth SIG, Inc., USA. Installguide_RevA_4.fm Page 0 Friday, January 18, 2002 11:05 AM 1 TABLE OF CONTENTS Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What Comes in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Spatial Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Mounting the Control Pad and Camera Arm . . . . . . . . . . . . . . . . . . . . . . 7 Planning for Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Mounting CopyCam Against the Wall . . . . . . . . . . . . . . . . . . . . . . . . 8 Preparing to Install the Control Pad . . . . . . . . . . . . . . . . . . . . . . . 8 Installing the Control Pad Mounting Plate . . . . . . . . . . . . . . . . . . 8 Routing the Control Pad Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Locking the Control Pad in Place . . . . . . . . . . . . . . . . . . . . . . . . 12 Removing the Control Pad From its Mounting Plate . . . . . . . . . 13 Preparing to Install the Camera Arm . . . . . . . . . . . . . . . . . . . . . . 14 Installing the Camera Arm Mounting Plate. . . . . . . . . . . . . . . . . 14 Cable Routing and Connections in the Camera Arm . . . . . . . . . 17 Locking the Camera Arm in Place . . . . . . . . . . . . . . . . . . . . . . . . 18 Concealing Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Routing Cables Within the Wall. . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Installing and Testing the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 About the Color Printer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Installing the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Testing the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Evaluating the Test Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Calibrating CopyCam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 When to Calibrate CopyCam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 How to Calibrate CopyCam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Calibrating CopyCam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Web Configuration and Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 CopyCam Web Server Introduction . . . . . . . . . . . . . . . . . . . . . . . . .29 Configuring the CopyCam Web Server . . . . . . . . . . . . . . . . . . . . . . 29 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Installguide_RevA_4.fm Page 1 Friday, January 18, 2002 11:05 AM 2 Voice Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 FCC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Installguide_RevA_4.fm Page 2 Friday, January 18, 2002 11:05 AM OVERVIEW3 OVERVIEW Welcome to CopyCam, your quick and easy tool to capture information from a whiteboard or chalkboard. CopyCam converts existing whiteboards and chalkboards into electronic copyboards. The user works on the board as usual, then presses one of three buttons to print, save to disk, or save to the web. This manual provides instructions for installing CopyCam. Refer to the CopyCam User Guide for help using CopyCam. Camera arm Color printer Control pad with floppy drive Installguide_RevA_4.fm Page 3 Friday, January 18, 2002 11:05 AM 4OVERVIEW WHAT COMES IN THE BOX 1 1 camera arm 21 camera arm mounting plate 31 control pad 41 control pad mounting plate 51 color printer with power cable and two starter ink cartridges 61 Bluetooth wireless printer adapter* 71 ethernet cable 81 power adapter and cord 91 camera arm positioning template 101 control pad positioning template 115 four-foot sections of cable raceway (for concealing cables) 122 cable raceway tees 134 cable raceway elbows 146 calibration sheets (4 corner sheets, one whiteboard, one blackboard sheet) 154 border buttons 164 #8 x 1.5 inch drywall screws 177 toggle bolts 187 toggle bolt screws (10-24 x 1.25 inch) 193 arm-securing screws 201 Installation Guide (this guide) 211 User Guide 221 web server configuration CD-ROM 231 registration card NOTE:NOTE: *Your CopyCam includes either a printer already enabled for Bluetooth wireless communication, or a standard color printer and a Bluetooth wireless adapter. Both printer configurations work identically and print at the same speed. Installguide_RevA_4.fm Page 4 Friday, January 18, 2002 11:05 AM OVERVIEW5 23 17 4 3 5 18 22 11 1 16 2 8 20 21 6 7 14 15 10 9 19 Place four of these on the writing area. Align each corner of the writing area with this corner on each sheet. Use four pieces of type to ensure that each sheet lies flat. Corner Calibration Sheet Place four of these on the writing area.…

Text truncated - open the document above for the full version.

Exhibit A: Agent Authorization Letter FCC ID: P6I-COPYCAM

Exhibit C: Request for Confidentiality Letter FCC ID: P6I-COPYCAM

Exhibit B: Compliance Summary FCC ID: P6I-COPYCAM Northwest EMC Compliance Opinion Revision 01/31/02 POLV0012 Information about the Client Company Name: Polyvision Corp. Address: 14523 SW Millikan Way Ste. 130 City, State, Zip: Beaverton, OR, 97005 Requested By: Guy Williams Job Number: POLV0012/HYPE0001 Equipment Under Test (EUT) EUT Model Number or Product Name: CopyCam Discussion The Applicant is using a MITSUMI ELECTRIC CO., LTD, Bluetooth Module, Model No. WML-C05 XX, FCC ID: POOWML-C05, as the transmitter for this application. The module as it is used in this “CopyCam” application uses a different antenna and lower power setting than was used for the original approval of the module. That lower power setting is a result of the Polyvision software implementation, no other changes were made to the module. Therefore, a new grant is being attained for this product. Due to the similarities with the original module approval, and the fact that no physical changes were made to the module, only those tests that could be affected were repeated. Specifically, the information provided for the original module application for the processing gain and the RF exposure justification was used. Opinion 20 dB Bandwidth Specification Requirements Description Comments/Deviations 15.247 20 dB Bandwidth Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report. Reference: Northwest EMC Test Report No. POLV0012. (File Name: Exhibit R Occupied Bandwidth) Northwest EMC Compliance Opinion Revision 01/31/02 POLV0012 Band-edge Compliance Specification Requirements Description Comments/Deviations 15.247 Band-edge compliance of RF conducted emissions. Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Northwest EMC Test Report No. POLV0012. (File Name: Exhibit S Band Edge Compliance) Carrier Frequency Separation Specification Requirements Description Comments/Deviations 15.247 Carrier Frequency Separation. Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Northwest EMC Test Report No. POLV0012. (File Name: Exhibit T Carrier Frequency Separation) Number of Hopping Frequencies Specification Requirements Description Comments/Deviations 15.247 Number of hopping frequencies. Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Northwest EMC Test Report No. POLV0012. (File Name: Exhibit Y Number of Hopping Frequencies) Northwest EMC Compliance Opinion Revision 01/31/02 POLV0012 Output Power Specification Requirements Description Comments/Deviations 15.247 Output Power. Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Northwest EMC Test Report No. POLV0012. (File Name: Exhibit N Output Power) Power Spectral Density Specification Requirements Description Comments/Deviations 15.247 Power Spectral Density. Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Northwest EMC Test Report No. POLV0012 (File Name: Exhibit Z Power Spectral Density) Spurious RF Conducted Emissions Specification Requirements Description Comments/Deviations 15.247 Spurious RF Conducted Emissions. Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Northwest EMC Test Report No. POLV0012. (File Name: Exhibit P Spurious RF Conducted Emissions) Time of Occupancy Specification Requirements Description Comments/Deviations 15.247 Time of Occupancy (Dwell time). Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Northwest EMC Test Report No. POLV0012. (File Name: Exhibit DD Time of Occupancy- Dwell Time) Northwest EMC Compliance Opinion Revision 01/31/02 POLV0012 Conducted Powerline Emissions Specification Requirements Description Comments/Deviations 15.247 Conducted Powerline Emissions. Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: STRATEST Test Report No. SL/EMC/0156/REVA (File Name: Exhibit AA Test Report from Stratest) Radiated Spurious Emissions Specification Requirements Description Comments/Deviations 15.247 Radiated Spurious Emissions. Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report. The initial submission was questioned due to the following problems noted in the STRATEST Test Report: ‰ The Wrong Pre-amplifier was listed in the report. ‰ The preamplifier actually used was operated outside of its’ specified frequency range. ‰ No high pass filter was used for making the measurements. ‰ The report did not indicate that low, mid and high channels were tested. ‰ Measurement bandwidths were not indicated in the test report. ‰ The test set up photos indicated that separate grounding was used. ‰ Information describing the test modes and software used was not provided. Due to some difficulty in resolving these issues additional test data was provided that may be referenced in the Northwest EMC test report. Though it is not a complete test, adequate testing was conducted to ensure the product was in compliance with the specified requirements. Refer…

Text truncated - open the document above for the full version.

Exhibit E: External Photos FCC ID: P6I-COPYCAM External Photos File 2/7/02 Pg...1 Photos 1 & 2 show the installation of a complete copycam (Photo 1) and a closeup of the wall mounted control module (Photo 2) Photo 1 Photo 2 External Photos File 2/7/02 Pg...2 Photos 3 & 4 show the connectors, external chassis, and antenna. Photo 3 shows the 3 User available connectors, the Ethernet RJ-45, the Control Panel RJ-14, and the Power Connector. This photo also clearly shows the RF (SMA) connector sticking out of the chassis with the antenna mounted on it. Photo 4 shows the top of the ARM assembly with the antenna clearly viewed, mounted on the top of the chassis. Photo 3 Photo 4

Exhibit D: FCC ID Label FCC ID: P6I-COPYCAM FCC ID Label & Location File 2/27/02 Pg..1 The FCC Label is shown here in Photo 1. This is the final, actual product label that will be shipped on the product. Photo 1 The location of the label is shown in these next two photos. As can be seen, the label is on the top of the product, near the antenna. The labels shown in these two pictures are not the final label pictured above – they are prototype labels, but the location is the same. Photo 2 FCC ID Label & Location File 2/27/02 Pg..2 Photo 3

Exhibit F: Internal Photos FCC ID: P6I-COPYCAM Internal Photos File 2/7/02 Pg.. 1 Photo 1 Shows the main circuit board with the Bluetooth radio module clearly shown where it is attached to the end of the coaxial cable with the SMA connector on the end, which is the antenna mount. Photo 2 is the bottom side view of the main board. Photos 3 & 4 show the scanner board front (Photo 3) and back side (Photo 4). Photo 3 Photo 4 Photo 1 Photo 2 Internal Photos File 2/7/02 Pg.. 2 Phtotos 5 & 6 show the front and back side of the controller board assembly. Photo 5 is the front side: Photo 5 Photo 6 is the back side: Photo 6 PCB buttom PCB top

Exhibit I: Antenna Description FCC ID: P6I-COPYCAM Antenna Info File 2/8/02 Pg.. 1 The antenna used with the Copycam for Bluetooth radio communications is the GigaAnt Titanis model. This antenna uses an SMA connector to connect to the product as shown below. The gain of the antenna is 1.6 dbi. This Antenna complies with the Antenna requirements of paragraph 15.203 of the FCC rules in that the antenna is permanently affixed to the SMA bulkhead connector during attachment with a structural adhesive that is added to the threads of the connector. Concept & Services/Swivel Antenna concept Bluetooth Swivel Antenna concept Swivel Antenna concept is intended for use with all 2.4 GHz applications where very high performance is of utmost importance and a small foot-print is of less consideration. Since this is a half- wave antenna it is independent of ground plane and the design minimizes special considerations concerning its placement. Typical applications Various instruments, network nodes and development work. Technical facts External 1/2 wave antenna independent of ground plan. Adjustable radiation angel TITANIS PICEA Lenght, mm 50 50 Efficiency, % 75 75 Gain, dbi 1.6 1.6 Connector SMA Snap-in Matching net Not required Required

Exhibit J: Technical Report-General Information FCC ID: P6I-COPYCAM Measurement/Technical Report General Information Applicant: PolyVision Corporation Address: 14523 SW Millikan Way Suite 140 City, State, Zip Beaverton, OR 97005 Test Requested By: Guy Williams Model: COPYCAM FCC ID: P6I-COPYCAM First Date of Test: February 22, 2002 Last Date of Test: February 22, 2002 Receipt Date of Samples: February 22, 2002 Job Number POLV12 Scope Regulatory Authority Federal Communications Commission Approval Type Certification Equipment Type Part 15 Spread Spectrum Transmitter Rule Part 47CFR 15.247 Rule Exemptions None Related Submittals or Grants POOWML-C05XX Report Information Prepared By Vicki Albertson, Technical Report and Documentation Manager Northwest EMC, Inc. Signature Issued By Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, Oregon 97124 Ph. (503) 844-4066 Fax (503) 844-3826 Report Number HYPE0001 Date Issued February 27, 2002 EUT Information Frequency Range 2402 MHz – 2480 MHz Antenna Conducted Output Power 0.000514 Watts Modulation FHSS Channel Bandwidth 1 MHz Antenna(s) gigaAnt Titanis Supply Power 120V, 60Hz to host unit Test Facility The measurement facility used to collect the radiated and conducted data is located at Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with the FCC (Federal Communications Commission), and accepted by the FCC in a letter maintained in our files. Laboratory Accreditation Northwest EMC, Inc. is recognized under the United States Department of Commerce, National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program (NVLAP) for satisfactory compliance with criteria established in Title 15, Part 285 Code of Federal Regulations. These criteria encompass the requirements of ISO/IEC Guide 25 and the relevant requirements of ISO 9002 (ANSI/ASQC Q92-1987) as suppliers of calibration or test results. NVLAP Lab Code: 200059-0. FCC ID: P6I-COPYCAM Exhibit A Agent Authorization Letter Exhibit B Compliance Summary Exhibit C Request for Confidentiality Letter Exhibit D FCC ID Label Exhibit E External Photos Exhibit F Internal Photos Exhibit G Radio Frequency Block Diagram Exhibit H Radio Operational Description Exhibit I Antenna Description Exhibit J Technical Report-General Information Exhibit K Radio Schematics Exhibit L User Manual Exhibit M Test Setup Photos Exhibit N Output Power Exhibit O Processing Gain Exhibit P Spurious RF Conducted Emissions Exhibit Q Spurious Radiated Emissions Exhibit R Occupied Bandwidth Exhibit S Band Edge Compliance Exhibit T Carrier Frequency Separation Exhibit U System Frequency Block Diagram Exhibit V System Operational Description Exhibit W System Schematics Exhibit X Installation Guide Exhibit Y Number of Hopping Frequencies Exhibit Z Power Spectral Density Exhibit AA Test Report from Stratest Exhibit BB Test Report Additional Information from Stratest 1 Exhibit CC Test Report Additional Information from Stratest 2 Exhibit DD Time of Occupancy Exhibit EE RF Exposure FCC Compliance common to all Bluetooth Devices 1 Output power and channel separation of a Bluetooth device in the different operating modes: The different operating modes (data-mode, acquisition-mode) of a Bluetooth device don’t influence the output power and the channel spacing. There is only one transmitter which is driven by identical input parameters concerning these two parameters. Only a different hopping sequence will be used. For this reason, the RF parameters in one op-mode is sufficient. 2 Frequency range of a Bluetooth device: The maximum frequency of the device is: 2402 – 2480 MHz. This is according the Bluetooth Core Specification V 1.0B (+ critical errata) for devices which will be operated in the USA. Other frequency ranges ( e.g. for Spain, France, Japan) which are allowed according the Core Specification must not be supported by the device. 3 Co-ordination of the hopping sequence in data mode to avoid simultaneous occupancy by multiple transmitters: Bluetooth units which want to communicate with other units must be organized in a structure called piconet. This piconet consist of max. 8 Bluetooth units. One unit is the master the other seven are the slaves. The master co-ordinates frequency occupation in this piconet for all units. As the master hop sequence is derived from it’s BD address which is unique for every Bluetooth device, additional masters intending to establish new piconets will always use different hop sequences. 4 Example of a hopping sequence in data mode: Example of a 79 hopping sequence in data mode: 40, 21, 44, 23, 42, 53, 46, 55, 48, 33, 52, 35, 50, 65, 54, 67, 56, 37, 60, 39, 58, 69, 62, 71, 64, 25, 68, 27, 66, 57, 70, 59, 72, 29, 76, 31, 74, 61, 78, 63, 01, 41, 05, 43, 03, 73, 07, 75, 09, 45, 13, 47, 11, 77, 15, 00, 64, 49, 66, 53, 68, 02, 70, 06, 01, 51, 03, 55, 05, 04 5 Equally average use of frequencies in data mode and short transmissions: The generation of the hopping sequence in connection mode depends essentially on two input values: 1. LAP/UAP of the master of the connection 2. Internal master clock The LAP (lower address part) are the 24 LSB’s of the 48 BD_ADDRESS. The BD_ADDRESS is an unambiguous number of every Bluetooth unit. The UAP (upper address part) are the 24 MSB’s of the 48 BD_ADDRESS. The internal clock of a Bluetooth unit is derived from a free running clock which is never adjusted and is never turned off. For synchronization with other units, only the offsets are used. It has no relation to the time of the day. Its resolution is at least half the RX/TX slot length of 312.5 μs. The clock has a cycle of about one day (23h30). In most case it is implemented as 28 bit counter. For the deriving of the hopping sequence the entire LAP (24 bits), 4 LSB’s (4 bits) (Input 1) and the 27 MSB’s of the clock (Input 2) are used. With this input values differen…

Text truncated - open the document above for the full version.

Exhibit N: Output Power FCC ID: P6I-COPYCAM Northwest EMC Peak Output Power Revision 2/4/02 Polv0012 Justification The individuals and/or the organization requesting the test provided the modes, configurations and settings available to evaluate. All of the EUT parameters listed below were investigated. This includes, but may not be limited to, antennas, tuned transmit frequency ranges, operating modes, and data rates. Channels in Specified Band Investigated: Low Mid High Operating Modes Investigated: No Hop Data Rates Investigated: Maximum Output Power Setting(s) Investigated: Maximum Power Input Settings Investigated: 120 VAC, 60 Hz. Software\Firmware Applied During Test Exercise software Special Test Software Version Unknown Description The system was tested using special software developed to test all functions of the device during the test. Ths software allowe the unit to be placed in a no hop mode and set to the low, mid, and high transmit channel Equipment Modifications No EMI suppression devices were added or modified. The EUT was tested as delivered. EUT and Peripherals Description Manufacturer Model/Part Number Serial Number EUT Polyvision CopyCam E0200066 Control Pad Polyvision N/A N/A AC Power Adapter Ault, Inc P48151000A000G N/A Northwest EMC Peak Output Power Revision 2/4/02 Polv0012 Cables Cable Type Shield Length (m) Ferrite Connection 1 Connection 2 Ethernet No 3.6 No Control Pad EUT DC Power No 4.4 No EUT AC Adapter PA = Cable is permanently attached to the device. Shielding and/or presence of ferrite may be unknown. Measurement Equipment Description Manufacturer Model Identifier Last Cal Interval Spectrum Analyzer Tektronix 2784 AAO 03/08/2001 24 mo Test Description Requirement: Per 47 CFR 15.247(b)(1), the maximum peak output power must not exceed 1 Watt. The measurement is made using either a peak power meter, or a spectrum analyzer using the following settings: • Resolution bandwidth set to greater than the 6 dB bandwidth of the modulated carrier, and • The video bandwidth set to greater than or equal to the resolution bandwidth. Configuration: The peak output power was measured with the EUT set to low, medium, and high transmit frequencies. The measurement was made using a direct connection between the RF output of the EUT and a spectrum analyzer. The EUT was transmitting at its maximum power and maximum data rate in a no hop mode. De Facto EIRP Limit: Per 47 CFR 15.247 (b)(1-3), the EUT meets the de facto EIRP limit of +36dBm. The maximum gain from the gigaAnt Titanis antenna is 1.6 dBi, the maximum peak output power is –2.89 dBm. Therefore the EUT’s maximum EIRP is –1.3 dBm. Completed by: ______________________________________ NORTHWEST2 EMC Rev BETA 01/30/01 EUT: CopyCamWork Order: POLV0012 Serial Numb…

Text truncated - open the document above for the full version.