P7KDL-70ISLED DESK LAMP

DL-70iSH / DL-70iS / DL-90 / DL-70 Do not repair, disassemble, or modify under any circumstances. Do not place near any heat sources or in direct sunlight. Place on flat, secure surface. Use ONLY the supplied AC power adaptor. Do not use appliances with frayed or damaged electrical cords. ̻ Product : LED Desk Lamp ̻ Model : DL-70iSH/DL-70iS/ DL-90/DL-70 ̻ Warranty Period : 1year ̻ Purchase Date: Purchaser Seller NameAddressTelephoneNameAddressTelephone ඖ G For Repair or Service If the product stops working correctly, discontinue its use and contact the listed service center in the manual or DIASONIC Technology at 82-31-474-0852. ඖ G Repair Policy 1. This product has passed strict quality control and testing process. 2. Failure of the product under normal operating conditions, during the warranty period may be repaired by Diasonic or our authorized service organization free of charge. Some shipping or handling charges may be involved. 3. For the following cases, some service fees will be charged. 1) When the product is damaged due to user's mishandling, abuse, or improper operation. 2) When the product is damaged due to user's modification, attempted repair, or otherwise access to sealed/non-user ser viceable items. 3) When the product is damaged due to fires, pollution, earthquakes and any other natural or unnatural conditions, acci dents, etc. 4. It will be at the sole discretion of Diasonic or the authorized service center to determine the qualification of the wa rranty service. Original purchase invoice and other documentation may be required to verify qualification of service. CAUTIONSPECIFICATIONWARRANTY CARD Do not touch electrical appliances with wet hands or when liquids are present. Please keep the light and all appliances dry and clean. Unplug adapter when the light will not be used for an extended time. Clean only with a soft dry cloth and do not use solvents or cleaning solutions. Never overload electrical circuits as it may cause electrical shock or fire. MODEL Docking USB Power Port USB 2.0 Speaker Color Temp.(K) CRI Brightness Life Time Power Power Consumption Dimension Weight Operating Temp. DL-70iSH DL-70iS DL-90 DL-70 Study 6,000~7,000KReading 4,500~5,500KRelaxation/Bedtime 2,300~3,300K Study 6,000~7,000K Reading 4,500~5,500K Relaxation/Bedtime 2,300~3,300K Audio Play & Charging(5V/1A) Charge only (700mA) Over 90 1,100 / 1,000 / 900 / 750 / 600Lux · 100Lux AC 100~240V to DC 12V/2A 11W for Lighting, 4W for Charging Charge only (700mA) Over 90 11W for Lighting, 3W for Charging --- 1,100 / 1,000 / 900 / 750 /600Lux · 100Lux Longer than 40,000Hour DF#433573Y#wr#GF#45Y2418D 4;3+Z=Edvh, { 4:5+G=Edvh, { 783+K, { 685+O, 4/433j 04373 ୅ -- Over 75 10W for Lighting L1.2W + R1.2W, Rotary Volume Control, Line in(3.5 Þ Stereo Jack) Longer than 40,000Hour 180(W:Base) x 172(D:Base) x 455(H) x 328(L) 1,160g -10~40 ୅ iPod & iPhone DESK LAMP iPod & iPhone Charging, Connection to the computer -- Over 75 Approx 1,100Lux · 100Lux AC 100~240V to DC 12V/1.5A 9W for Lighting, 4W for Charging USER MANUAL ㍆㭂ᆧ#ℂ᢮㆞OHGㇲⳲⳮ㫿44ZQRፆ⍋Ɱ⟆ᴏ⇞㬢 OHGⲏ✂Ὧ iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Charging & Stereo Speaker for iPod & iPhone ̻G Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ̻G Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferen ce in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if no t installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. FCC (Federal Communications Commission) Thank you for purchasing DL-70iSH /DL-70iS/ DL-90/ DL-70. Please read instructions with care and operate DL-70iSH /DL-70iS/ DL-90/ DL-70 safely before use. We'd like to recommend you to keep instructions to use DL-70iSH /DL-70iS/ DL-90/ DL-70 well. ONLY Supplied Adaptor DL-70iSH/DL-70iS DL-90/DL-70 6;Fp 73 俋 4;3 俋 83 俋 <3 俋 5;8 俋 GO0<3GO0:3 ᝁ⷟#=#Ox{#/#叁83Ox{ Step ᠻ✻Όᥴ 4ᝁၛ 933 5ᝁၛ :83 6ᝁၛ <33 7ᝁၛ 4333 8ᝁၛ 4433 4,# Unscrew and remove the attachment nut from the light stand as shown. 5,# Assemble the light stand to the light base as shown. 7,# Adjust the position of the light as desired. 6,# Replace the attachment nut to the light stand from where it originally came nd hand tighten. (do not over-tighten). lightstand Nut (DL-90) Reading Mode Study Mode Relaxation Mode Bedtime Mode Timer Button Power On/OFF (DL-70) Multi-Pivot-Flexible Positioning Brightness at 40CmEasy to Assemble - Instructions GO0:3lVK Unit : Lux, · 50Lux Step Step 1 500600300 50 Step 2 650750350100 Step 3 800900400150 Step 4 900 1000 450200 Step 5 10001100 500250 Multi-Pivot-Flexible Positioning Brightness at 40Cm LED Light iPod & iPhone Cradle Edvh Frqwuro#Exwwrq ඖ Brightness control feature. (DL-70iSH model only) - 5 Step Brightness Control Function. ඖ Timer Control Feature. (DL-70iSH model only) - Automatically turns off the light off in one (1) hour while in any mode of operation.ඖ One touch contro…

Text truncated - open the document above for the full version.

#321-43, Suksu-dong, Manan-gu, Anyang-City, Kyungki-do, Korea Diasonic Technology Co., Ltd. May 11, 2011 Federal communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 LETTER OF AUTHORIZATION To whom it may concern: We, the undersigned, hereby authorize DSTech CO. to act on our behalf in all manners relating to application for equipment authorization for FCC IC : P7KDL-70IS including signing of all documents relating to these matters Any and all acts carried out by DSTech CO. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from DIASONIC TECHNOLOGY CO., LTD Sincerely, Min-Hwan Kim / R&D Director

#321-43, Suksu-dong, Manan-gu, Anyang-City, Kyungki-do, Korea May 11, 2011 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re : DIASONIC TECHNOLOGY CO.,LTD. FCC ID : P7KDL-70iS Request for Confidentiality Gentlemen In accordance with 0.459 of CFR 47 DIASONIC TECHNOLOGY CO.,LTD. Hereby requests confidentiality of the Block Diagram(DL-70iS Block Diagram.pdf). These documents contain detailed system and equipment description and information about the product which DIASONIC TECHNOLOGY CO.,LTD. considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological product will evolve , DIASONIC TECHNOLOGY CO.,LTD. considers that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Min-Hwan Kim / R&D Director

Features •Number of Keys: – One, toggle mode (touch-on/touch-off), plus programmable auto-off delay and external cancel – Configurable as either a single key or a proximity sensor •Technology: – Patented spread-spectrum charge-transfer (direct mode) •Key outline sizes: – 6 mm x 6 mm or larger (panel thickness dependent); widely different sizes and shapes possible •Electrode design: – Solid or ring electrode shapes •PCB Layers required: –One •Electrode materials: – Etched copper, silver, carbon, Indium Tin Oxide (ITO) •Electrode substrates: – PCB, FPCB, plastic films, glass •Panel materials: – Plastic, glass, composites, painted surfaces (low particle density metallic paints possible) •Panel thickness: – Up to 12 mm glass, 6 mm plastic (electrode size and Cs dependent) •Key sensitivity: – Settable via external capacitor (Cs) •Interface: – Digital output, active high or active low (hardware configurable) •Moisture tolerance: –Good •Power: – 1.8V ~ 5.5V; 32 μA at 1.8V •Package: – 6-pin SOT23-6 (3 x 3 mm) RoHS compliant – 8-pin UDFN/USON (2 x 2 mm) RoHS compliant •Signal processing: – Self-calibration, auto drift compensation, noise filtering One-channel Toggle-mode Touch Sensor IC with Power Management Functions AT42QT1012 9543D–AT42–08/10 2 9543D–AT42–08/10 AT42QT1012 1. Pinout and Schematic 1.1Pinout Configurations 1.1.16-pin SOT23-6 1.1.28-pin UDFN/USON VDD TIME SNSK VSS OUT 4 1 2 3 5 6 SNS QT1012 Pin 1 ID OUT SNSK VSS SNS VDD TIME N/C N/C 4 3 2 1 8 7 6 5 QT1012 3 9543D–AT42–08/10 AT42QT1012 1.2Pin Descriptions 1.3Schematics 1.3.16-pin SOT23-6 Figure 1-1.Basic Circuit Configuration (active high output, toggle on/off, no auto switch off) Table 1-1.Pin Listing 6-Pin8-PinNameTypeDescription If Unused, Connect To .. . 15OUTO (1) Output state. To switched circuit and output polarity selection resistor (Rop) 24VssPGround 31SNSKI/OSense pin. To Cs capacitor and to sense electrodeCs + key 48SNSI/O Sense pin. To Cs capacitor and multiplier configuration resistor (Rm). Rm must be fitted and connected to either VSS or VDD. See Section 3.11.4 on page 13 for details. Cs 57VddPPower 66TIMEI Timeout configuration pin. Must be connected to either VSS, VDD, OUT or an RC network. See Section 3.11 on page 11 for details. –2N/C–Not connectedDo not connect –3N/C–Not connectedDo not connect 1. I/O briefly on power-up IInput onlyI/OInput and output OOutput only, push-pullPGround or power VDD TIME VSS 2 6 5 OUT 1 Rop VDD CS SNSK SNS 4 3 RS Note: bypass capacitor to be tightly wired between VDD and VSS and kept close to pin 5. SENSE ELECTRODE Cby Rm 4 9543D–AT42–08/10 AT42QT1012 1.3.28-pin UDFN/USON Figure 1-2.Basic Circuit Configuration (active high output, toggle on/off, no auto switch off) Re Figure 1-1 on page 3 and Figure 1-2, check the following sections for component values: • Cs capacitor (Cs) – see Section 4.2 on page 20 • Sample resistor (Rs) – see Section 4.3 on page 20 • Voltage levels – see Section 4.4 on page 20 • Output polarity selection resistor (Rop) – see Section 3.9 on page 10 • Rm resistor – see Section 3.11.2 on page 11 • Bypass capacitor (Cby) – see page 21 VDD TIME VSS 4 6 7 OUT 5 Rop VDD CS SNSK SNS 8 1 RS Note: bypass capacitor to be tightly wired between VDD and VSS and kept close to pin 7. SENSE ELECTRODE Cby Rm N/C N/C 3 2 5 9543D–AT42–08/10 AT42QT1012 2. Overview of the AT42QT1012 2.1Introduction The AT42QT1012 (QT1012) is a single key device featuring a touch on/touch off (toggle) output with a programmable auto switch-off capability. The QT1012 is a digital burst mode charge-transfer (QT ™ ) sensor designed specifically for touch controls. It includes all hardware and signal processing functions necessary to provide stable sensing under a wide variety of changing conditions; only low cost, noncritical components are required for operation. With its tiny low-cost packages, this device can suit almost any product needing a power switch or other toggle-mode controlled function, especially power control of small appliances and battery-operated products. A unique “green” feature of the QT1012 is the timeout function, which can turn off power after a time delay. Like all QTouch ™ devices, the QT1012 features automatic self-calibration, drift compensation, and spread-spectrum burst modulation in order to provide for the most reliable touch sensing possible. 2.2Basic Operation Figure 1-1 on page 3 and Figure 1-2 on page 4 show basic circuits for the 6-pin and 8-pin devices. The QT1012 employs bursts of charge-transfer cycles to acquire its signal. Burst mode permits power consumption in the microamp range, dramatically reduces RF emissions, lowers susceptibility to EMI, and yet permits excellent response time. Internally the signals are digitally processed to reject impulse noise, using a “consensus” filter which requires four consecutive confirmations of a detection before the output is activated. The QT switches and charge measurement hardware functions are all internal to the QT1012. 2.3Electrode Drive Figure 2-1 on page 6 shows the sense electrode connections (SNS, SNSK) for the QT1012. For optimum noise immunity, the electrode should only be connected to the SNSK pin. In all cases the sample capacitor Cs should be much larger than the load capacitance (Cx). Typical values for Cx are 5 – 20 pF while Cs is usually 2.2 – 50 nF. Note:Cx is not a physical discrete component on the PCB, it is the capacitance of the touch electrode and wiring. It is show in Figure 2-1 on page 6 to aid understanding of the equivalent circuit. Increasing amounts of Cx destroy gain, therefore it is important to limit the amount of load capacitance on both SNS terminals. This can be done, for example, by minimizing trace lengths and widths and keeping these traces away from power or ground traces or copper pours. The traces, and any components associated with SNS and SNSK, will become touch sensitive and should be treated with caution to limit the touch area to the desired location. To endure that the correct o…

Text truncated - open the document above for the full version.

FCC ID : P7KDL-70IS 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 External Photos FCC ID : P7KDL-70IS 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 FCC ID : P7KDL-70IS 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451

FCC ID : P7KDL-70IS 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 FCC ID LABEL LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase FCC ID : P7KDL-70IS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

FCC ID : P7KDL-70IS 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 Internal Photos FCC ID : P7KDL-70IS 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 FCC ID : P7KDL-70IS 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 FCC ID : P7KDL-70IS 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451

Macroblock, Inc. 2004 Floor 6-4, No.18, Pu-Ting Rd., Hsinchu, Taiwan 30077, ROC. TEL: +886-3-579-0068, FAX: +886-3-579-7534 E-mail: [email protected] - 1 - Macroblock Preliminary Datasheet MBI1804 All-Ways-On TM High-Power LED Driver November 2004, V1.00 OE Features l 4 constant-current output channels l Constant output current invariant to load voltage change l Maximum output constant current: 360 mA l Excellent output current accuracy: between channels: <±3% (max.), and between ICs: <±6% (max.) l Output current adjusted through an external resistor l Fast response of output current, (min.): 10μs l Schmitt trigger input l 5V supply voltage l Package type: SOP8 with thermal pad Product Description MBI1804 is an instant On/Off LED driver for high power LED applications and exploits PrecisionDrive™ and All-Ways-On™ technology to enhance its output characteristics. At MBI1804 output stage, four regulated current ports are designed to provide uniform and constant current sinks for driving LEDs within a large range of V F variations. With All-Ways-On™, MBI1804 provides users easily a consistent current source in their system design. Users may adjust the output current from 20 mA up to 360 mA through an external resistor, R ext , which gives users flexibility in controlling the light intensity of LEDs. In addition, users can precisely adjust LED brightness from 0% to 100% via output control with Pulse Width Modulation. MBI1804 also guarantees LED can be cascaded to maximum 17V at the output ports. Additionally, to ensure the system reliability, MBI1804 is provided in the SOP8 with thermal pad for dramatically increased power dissipation capability. As a result, a large amount of current can be handled safely in one package. Current Accuracy Between Channels Between ICs Conditions < ±3% < ±6% I OUT = 40 ~ 240 mA CD: SOP8-150-1.27 MBI1804 All-Ways-On TM High-Power LED Driver November 2004, V1.00. - 2 - Applications l High-Flux LED Lighting l Automotive Interior Lighting l LCD Backlight l Photocopier l Scanner Typical Application Circuit GND R-EXT OUT0 OUT1 VDD OE OUT3 OUT2 R-EXT VDD OE VLED 8 7 6 5 4 3 2 1 Block Diagram Terminal Description Maximum Ratings Pin No. Pin Name Function 1 GND Ground terminal for control logic and current sink 3, 4, 5, 6 OUT0~OUT3 Constant current output terminals 7 OE Output enable terminal When OE(active) low, the output drivers are enabled; when OEhigh, all output drivers are turned OFF (blanked). 2 R-EXT Terminal used to connect an external resistor(R ext ) for setting up output current for all output channels 8 VDD 5V supply voltage terminal 4 switches I O Regulator VDD OUT0 1OUT OUT2 OUT3 OE Pin Configuration MBI1804 R-EXT Figure 1 MBI1804 All-Ways-On TM High-Power LED Driver November 2004, V1.00. - 3 - Characteristic Symbol Rating Unit Supply Voltage V DD 0~7.0 V Input Voltage V IN -0.4~V DD + 0.4 V Output Current I OUT 360* mA Output Voltage V DS -0.5~+17.0 V GND Terminal Current I GND 1440 mA Power Dissipation* (On PCB, Ta=25°C) P D 0.8 W Thermal Resistance* (Under good thermal system) 33.39** Thermal Resistance* (On PCB, Ta=25°C) SOP8 R th(j-a) 125 °C/W Operating Temperature T opr -40~+85 °C Storage Temperature T stg -55~+150 °C *Users must notice that the power dissipation (almost equaling to I OUT x V DS ) should be within the Safe Operation Area shown in Figure 6. ** Good thermal system design can ensure that the heat management of the total system (storage temperature and operating temperature) maintains MBI1804 within the defined temperature limits (R th(j-a) = 33.39°C/W). MBI1804 All-Ways-On TM High-Power LED Driver November 2004, V1.00. - 4 - Electrical Characteristics Characteristic Symbol Condition Min. Typ. Max. Unit Supply Voltage V DD - 4.5 5.0 5.5 V Output Voltage V DS OUT0~ OUT3 - - 17.0 V Output Current I OUT DC Test Circuit 20 - 360 mA “H” level V IH Ta= -40~85ºC 0.7*V DD - V DD V Input Voltage “L” level V IL Ta= -40~85ºC GND - 0.3*V DD V Output Leakage Current I OH V OH = 17.0V - - 0.5 μA Output Current 1 I OUT1 V DS = 0.6V R ext = 720 Ω - 105 - mA Current Skew dI OUT1 I OL = 105mA V DS = 0.6V R ext = 720 Ω - ±1 ±3 % Output Current 2 I OUT2 V DS = 0.8V R ext = 360 Ω - 210 - mA Current Skew dI OUT2 I OL = 210mA V DS = 0.8V R ext = 360 Ω - ±1 ±3 % Output Current vs. Output Voltage Regulation %/dV DS V DS within 1.0V and 3.0V - ±0.1 - % / V Output Current vs. Supply Voltage Regulation %/dV DD V DD within 4.5V and 5.5V - ±1 - % / V Pull-up Resistor R IN (up) OE 250 500 800 KΩ I DD (off) 1 R ext =Open, OUT0~OUT3= Off - 6 8 I DD (off) 2 R ext =720 Ω, OUT0~OUT3= Off - 6 8 “OFF” I DD (off) 3 R ext =360 Ω, OUT0~OUT3= Off - 6 8 I DD (on) 1 R ext =720 Ω, OUT0~OUT3= On - 9 11 Supply Current “ON” I DD (on) 2 R ext =360 Ω, OUT0~OUT3= On - 10 12 mA Test Circuit for Electrical Characteristics Figure 2 MBI1804 All-Ways-On TM High-Power LED Driver November 2004, V1.00. - 5 - Switching Characteristics Characteristic Symbol Condition Min. Typ. Max. Unit Propagation Delay Time (“L” to “H”) OE - OUTn t pLH 1 2 3 μs Propagation Delay Time (“H” to “L”) OE - OUTn t pHL 1 2 3 μs Pulse Width OE t w(OE) 10 - - μs Output Rise Time of Vout (turn off) t or 1 1.7 3 μs Output Fall Time of Vout (turn on) t of V DD = 5.0 V V DS = 1-1.5V V IH = V DD V IL = GND R ext = 300 Ω V L = 4.0 V R L = 10 Ω C L = 10 pF 1 1.7 3 μs Test Circuit for Switching Characteristics Figure 3 MBI1804 All-Ways-On TM High-Power LED Driver November 2004, V1.00. - 6 - Application Information Constant Current In LED lighting applications, MBI1804 provides nearly no variations in current from channel to channel and from IC to IC. This can be achieved by: 1) The maximum current variation between channels is less than ±3%, and that between ICs is less than ±6%. 2) In addition, the current characteristic of output stage is flat and users can refer to the figure as shown below. The output current can be kept constant regardless of the variations of LED forward voltages (V F ). This performs as a perfection …

Text truncated - open the document above for the full version.

© 2009 Microchip Technology Inc.PreliminaryDS41391B PIC16F/LF1826/27 Data Sheet 18/20/28-Pin Flash Microcontrollers with nanoWatt XLP Technology DS41391B-page 2Preliminary© 2009 Microchip Technology Inc. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, K EELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, rfPIC and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Octopus, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, PIC 32 logo, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2009, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Note the following details of the code protection feature on Microchip devices: •Microchip products meet the specification contained in their particular Microchip Data Sheet. •Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. •There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. •Microchip is willing to work with the customer who is concerned about the integrity of their code. •Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Microchip received ISO/TS-16949:2002 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC ® MCUs and dsPIC ® DSCs, KEELOQ ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. © 2009 Microchip Technology Inc.PreliminaryDS41391B-page 3 High-Performance RISC CPU: • C Compiler Optimized Architecture • 256 bytes Data EEPROM • Up to 4 Kbytes Linear Program Memory Addressing • Up to 384 bytes Linear Data Memory Addressing • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Flexible Oscillator Structure: • Precision 32 MHz Internal Oscillator Block: - Factory calibrated to ± 1%, typical - Software selectable frequencies range of 31 kHz to 32 MHz • 31 kHz Low-Power Internal Oscillator • Four Crystal modes up to 32 MHz • Three External Clock modes up to 32 MHz • 4X Phase Lock Loop (PLL) • Fail-Safe Clock Monitor: - Allows for safe shutdown if peripheral clock stops • Two-Speed Oscillator Start-up • Reference Clock Module: - Programmable clock output frequency and duty-cycle Special Microcontroller Features: • Full 5.5V Operation – PIC16F1826/27 • 1.8V-3.6V Operation – PIC16LF1826/27 • Self-reprogrammable under Software Control • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Programmable Brown-out Reset (BOR) • Extended Watchdog Timer (WDT): - Programmable period from 1ms to 268s • Programmable Code Protection • In-Circuit Serial Programming™ (ICSP™) via two pins • In-Circuit Debug (ICD) via two pins • Enhance Low-Voltage Programming • Power-Saving Sleep mode Extreme Low-Power Management PIC16LF1826/27 with nanoWatt XLP: • Sleep mode: 30 nA • Watchdog Timer: 500 nA • Timer1 Oscillator: 600 nA @ 32 kHz Analog Features: • Analog-to-Digita…

Text truncated - open the document above for the full version.

Report No.: DST-10-C001 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 Page : 2 / 11 Report No.: DST-11-F011 TABLE OF CONTENTS 1. GENERAL DESCRIPTION OF EUT 3 2. GENERAL INFORMATION OF TEST 4 3.1 CONDUCTED EMISSION TEST 7 3.2 RADIATED EMISSION TEST 10 Report No.: DST-10-C001 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 Page : 3 / 11 Report No.: DST-11-F011 1. General Description of EUT 1.1 Applicant Company Name : Diasonic Technology Co., Ltd. Address : #321-43, Suksu-dong, Manan-ku, Anyang-city, Kyungki-do, Korea. Contact Person : Byung Hoon Lee E-mail : [email protected] Phone/Fax : Phone : +82-31-474-0852 Fax : +82-31-474-0861 1.2 Manufacture Company Name : Diasonic Technology Co., Ltd. Address : #321-43, Suksu-dong, Manan-ku, Anyang-city, Kyungki-do, Korea. 1.3 Basic Description of EUT Product Name : LED DESK LAMP Model Name : DL-70iS Brand Name : - Serial Number : - Input Rating (Used adapter) : Manufacturer : Ktec Co.,Ltd Model No.: KSAS0241200200HU Input : AC 100V~240V, 50/60Hz, 0.6A Output : DC 12V, 2A Internal Clock Freq 32 MHz Report No.: DST-10-C001 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 Page : 4 / 11 Report No.: DST-11-F011 2. General Information of Test 2.1 Test Facility This test was carried out by DSTech Co. Test Site Location : 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea TEL : 82-31-336-1798, FAX : 82-31-336-3451 2.2 Standard for Methods of Measurement Basic Standard Description Test Result FCC Part 15 Subpart B 15.107(a) Conducted Emission Pass Fail 15.109(a) Radiated Emission Pass Fail * The sample was tested according to the following specification: ANSI C 63.4:2009 Report No.: DST-10-C001 80, Jeil-ri, Yangji-myun, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea. tel +82-31-336-1798 fax +82-31-336-3451 Page : 5 / 11 Report No.: DST-11-F011 2.3 Description of EUT modification N/A 2.4 Variations covered by this report N/A 2.5 Additional information related to Testing Test results apply only to the particular sample tested and functionality described in this test report. This report may be reproduced in full. Partial reproduction may only be made with the written permission of the DSTech. 2.6 Test Conditions EUT Operating Mode EUT was tested according to the following operation modes provided by the specifications given by the manufacturer and reported the worst emissions. Operation Modes Worst Case Mode The EUT set up max value and PC download Test System layout on EUT and peripherals Power cable Signal cable AC 120 V EUT iPOD Note PC Printer Re…

Text truncated - open the document above for the full version.