P7KRVM-704MTOUCH SCREEN MONITOR

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 1 of 1 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Appendix 6. User manual 2-DIN, 7”Touchscreen Monitor Model : RVM-704M Instruction Manual (Ver 1.0) IndexIndex 1. Caution2. Components of the product3. How to use the p roduct p 4. How to install the product5. Specification • Thank you for purchasing our touchscreen vehicle monitor.• Please read this manual before you use the product. • The product may be different than described in the manual; de p endin g on renewal and/or u pg rade of S/W version and p erformance it pg pg p can be altered without notice. 1. Caution ● For your safe operation, please read this manual before you start to use the product. We inform you that our company shall not be responsible for failures and troubles that are occurred due to misuse or neglection of the cautions written on this manual. ● Operating this equipment when driving a vehicle might cause an accident. Use the equipment after parking or stopping the vehic le in a safe area.● When wiping off the dust, use a soft fabric instead of liquid solventsWhen wiping off the dust, use a soft fabric instead of liquid solvents (thinner ,benzene etc.) solution or a wet rag.● Do not press the liquid crystal screen hard. It might be damag ed by hard pressure. ● Do not drop or give shock It might cause breakdown or damage ● Do not drop or give shock . It might cause breakdown or damage . ● Do not dismantle the product arbitrarily. We do not supply fre e after service for an arbitrarily dismantled product. ● Touching the power with a wet hand causes electric shock. Caut ion required.● For accessories or cables to connect with the product, it is recommended to us e proper goods from our company. We are not responsible for any problems caused by wrong articles.● Do not disconnect the power cable during using the product. It might cause damage to the product.# Amplified explanation is as follows.● Caution: This part informs what to keep in mind or understand and what ti i i d t th d t cau ti on i s requ i re d t o use th e pro d uc t . ● Ref (reference): Reference is about functional explanation. 2. Components of the product ② ① ① Touch Screen ③ ●By t ouching one of the small pictures during multi screen mode, the concerning small picture will be enlarged into Full Screen mode . ● By touching the screen it is po ssible to control the equipment or to change the settings.② Power On/Off ● Press the Power button for 0.5 seconds to turn on the screen.● Press the Power button for 0 5 seconds to turn off the screen ③ illuminance Sensor ● Press the Power button for 0 . 5 seconds to turn off the screen when it is tuned on. ● Behind this window a sensor detects the actual light conditions in the area around the screen. When activated via the menu settings, t his sensor automatically controls the brightness of the screen. (Day/Night control) Back side ③ ② ① ① Power Cable ① ① Power Cable ● Connect the Power Cable ( VCC/GND/TRIGGER1~ TRIGGER5/Speed Switch ) ② Camera Cable ③ Internal SPK ●Connect theCamera Cable ( Camera cable2 ) PACKAGE CONTENTS ● Please check that you have the correct contents before using t his product. ● If any items are missing, please contact your dealer. Monitor Sunvisor BRKT Power Cable Manual Camera Cable OPTION EXT.SPK EXT.MIC 3. How to use the product Start Screen ● When the booting is ready, the multi screen as below will be di splayed. When the small window is Touched, it is enlarged.Touched, it is enlarged. ● When the small windows on the multi screen are touched, the ch annel is enlarged into full screen mode. One more touch returns it ba ck to the multi screen mode. ●: Controls volume of the speaker ● : S tti ● : S e tti ngs menu ● : Run the Bluetooth Phon e (Optional function) ● : Change Input signal ● : Multi screen mode Volume Control ● Press the button to display Volume Pop-up. ② ③ ② ③ ①① ① Press the button to mute ② Press the button to increase the volume③ Press the button to decrease the volume ③ Press the button to decrease the volume ● PthItbttth It Input selection ● P ress th e I npu t b u tt on t o c h ange I npu t Press input button once: AUX1 Press input button 3 times: once: AUX1 button 3 times: Cam Press input button twice: AUX2 ● P th lti b tt t di id th Multi screen ● P ress th e mu lti screen b u tt on t o di v id e th e screen. ①② ③ ④ Press multi screen button once: Press multi screen button 3 times: ③ ④ button once: Cam1,Cam2 times: Cam1,2,3,4 ①② ③④ Press multi screen button twice: Cam3,Cam4 ● P th tti b tt t th S tti Setting Mode ● P ress th e se tti ng menu b u tt on t o open th e S e tti ng screen. ● CAM : Adjust brightness of Camera input screen● AUX : Adjust brightness of AUX screen ● AUX Adjust brightness of AUX screen Display Input the name into each channel. ● Mirror : Mirror image or normal image● Up : Change up and down of the screen● Shutter : Enable to operate Shutter/Heater Camera Display Setup screen position of each channel ※ Caution: Cam1and AUX1 cannot be setup at the same time Cam2 and AUX2 cannot be setup at the same time. Setup the screen on each Trigger The screen will be showed screen by each Trigger set if input Trigger. Display Di l th f ll di t h Di sp l ay th e f u ll screen accor di ng t o eac h channel setup when setting up On Display the dividing lines of the screenDisplay the dividing lines of the screen Display Adjust Parking line of each Trigger Trig 1 Front & Rear Calibration Trig . 1 Front & Rear Calibration Function The screen is turned ON automaticallyThe screen is turned ON automatically when starting the vehicle Automatic brightness adjustment by sensor in the front housing Sensitivity of automatic brightness adjustment, level 0 to 10 controlled by actual light conditions (Day/Night) Function Keep Tri…

Text truncated - open the document above for the full version.

USER'S MANUAL S3C2450 16/32-Bit RISC Microprocessor August 2008 REV 1.11 Confidential Proprietary of Samsung Electronics Co., Ltd Copyright © 2008 Samsung Electronics, Inc. All Rights Reserved Important Notice The information in this publication has been carefully checked and is believed to be entirely accurate at the time of publication. Samsung assumes no responsibility, however, for possible errors or omissions, or for any consequences resulting from the use of the information contained herein. Samsung reserves the right to make changes in its products or product specifications with the intent to improve function or design at any time and without notice and is not required to update this documentation to reflect such changes. This publication does not convey to a purchaser of semiconductor devices described herein any license under the patent rights of Samsung or others. Samsung makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Samsung assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation any consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by the customer's technical experts. Samsung products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, for other applications intended to support or sustain life, or for any other application in which the failure of the Samsung product could create a situation where personal injury or death may occur. Should the Buyer purchase or use a Samsung product for any such unintended or unauthorized application, the Buyer shall indemnify and hold Samsung and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, expenses, and reasonable attorney fees arising out of, either directly or indirectly, any claim of personal injury or death that may be associated with such unintended or unauthorized use, even if such claim alleges that Samsung was negligent regarding the design or manufacture of said product. S3C2450 16/32-Bit RISC Microprocessor User's Manual, Revision 1.11 Publication Number: 21.10-S3-C2450- 082008 Copyright © 2008 Samsung Electronics Co.,Ltd. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electric or mechanical, by photocopying, recording, or otherwise, without the prior written consent of Samsung Electronics. Samsung Electronics' microcontroller business has been awarded full ISO-14001 certification (BSI Certificate No. FM24653). All semiconductor products are designed and manufactured in accordance with the highest quality standards and objectives. Samsung Electronics Co., Ltd. San #24 Nongseo-Dong, Giheung-Gu Yongin-City, Gyeonggi-Do, Korea C.P.O. Box #37, Suwon 446-711 TEL: (82)-(31)-209-4593 FAX: (82)-(31)-209-5324 Home Page: http://www.samsungsemi.com Printed in the Republic of Korea E-Mail: [email protected] NOTIFICATION OF REVISIONS ORIGINATOR: Samsung Electronics, LSI Development Group, Gi-Heung, South Korea PRODUCT NAME: S3C2450 RISC Microprocessor DOCUMENT NAME: S3C2450 User's Manual, Revision 1.11 DOCUMENT NUMBER: 21.10-S3-C2450-082008 EFFECTIVE DATE: August, 2008 DIRECTIONS: Revision 1.11 REVISION HISTORY Revision No Description of Change Refer toAuthor(s) Date 0.00 S3C2450X User’s Manual Preliminary Revision 0.0 release - AP app part. February 27, 2008 0.10 Overview, Syscon, DRAMC, NAND, IOport, RTC , UART, USB 2.0, 2D, HSSPI, HSMMC, LCD controller, Camera, ADC & Touch, I2S, I2S Multi Audio, AC97, PCM, Electrical Data Updated - AP app part. April 22, 2008 0.20 Overview, Syscon, MATRIX & EBI & Bus Priority, SMC, DMC, Nand Flash, IOport, 2D, TSADC, Electrical Data, Mechanical Data Updated - AP app part. June 11, 2008 1.00 USB in SYSCON , MATRIX & EBI, DRAMC, NAND Flash, Interrupt controller, IO port, UART, 2D, TSADC, IIS Interface, PCM are updated. - AP app part. July 10, 2008 1.10 Idle mode in SYSCON, UART, Camera, IIS, Electrical Data is updated. - AP app part. August 26, 2008 1.11 Electrical Data is updated. - AP app part. August 27, 2008 REVISION DESCRIPTIONS FOR REVISION 1.11 Chapter Chapter Name Page Subjects (Major changes comparing with last version) 1. Overview 1-3 UART part is updated. 2. System controller 2-13 Entering into IDLE mode is changed. 2. System controller 2-14 Entering into IDLE mode is changed. 2. System controller 2-20 Entering into IDLE mode is changed. 2. System controller 2-31 Entering into IDLE mode is changed. 15. UART 15-11 UART Clock and PCLK relation is updated. 23. Camera 23-45 MSDMA SOURCE image width description is added. 25. IIS Interface 25-17 Overrun interrupt is corrected to Under-run interrupt 26. IIS Multi Audio Interface26-17 Overrun interrupt is corrected to Under-run interrupt 29. Electrical Data 29-ALL Electrical spec for SMC/ NFCON/ DRAMC/ USB/ HSMMC/HS-SPI are changed. S3C2450X RISC MICROPROCESSOR iii Table of Contents Chapter 1 Product Overview 1 Introduction ............................................................................................................................................... 1-1 2 Features .................................................................................................................................................... 1-2 3 Block Diagram........................................................................................................................................... 1-5 4 Pin Assignments ....................................................................................................................................... 1-6 4.1 Signal Descriptions.................................…

Text truncated - open the document above for the full version.

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 1 of 3 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Appendix 2 External photos of EUT - Front - Rear http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 2 of 3 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. - Top - Bottom http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 3 of 3 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. - Left - Right

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R079 EMC compliance Ltd. 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Label Location

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 1 of 3 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Appendix 3 Internal photos of EUT -Bluetooth module http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 2 of 3 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Appendix 3 Internal photos of EUT - Main board top - Main board bottom http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 3 of 3 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. - Key board top - Key board bottom

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 1 of 1 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Appendix 9. Antenna specification Application Bluetooth Zigbee WLAN (IEEE 802.11 b/g) ISM 2.4GHz Wireless Devices Features Helical Structure Size (9.0*3.0*1.2mm 3 ) Easy Optimizing with external lumped matching components SMT Available under Pb-free Condition RoHSCompliant DATASHEET DocumentDatasheet TypeMultilayer Chip Antenna Application2.4GHz Part No.ALA931C5 Revision6.0 Notes The contents of this datasheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. AMOTECH AMOTECH Co., Ltd. Datasheet / Multilayer Chip Antenna / 2.4GHz ALA931C5 (Rev 6.0) 2 Rev. NoDateTitleContentsPage 6’10.01.19FormatChangeddocument format Table of Content Revision History 1.Specifications 3 1.1 Electrical Specifications 3 1.2 Mechanical Specifications 3 1.3 Appearance and Material 3 2. PCB Design for Test 4 2.1 Evaluation BoardDimension 4 2.2 PCB Design Guide 4 3. Measurement Result 5 3.1 Typical Measurement Result (VSWR/RL,Smithchart) 5 3.2 Typical Measurement Result(Gain, Radiation Pattern) 6 4. Reliability 7 5. Soldering Reflow Profile 7 6. Packaging 8 6.1 Carrier Tape Dimension 8 6.2 PackagingQuantity 8 6.3 Packaging Label 8 Datasheet / Multilayer Chip Antenna / 2.4GHz ALA931C5 (Rev 6.0) 3 NoItemSpec.Remark 1Frequency Range [GHz]2.4 ~2.485 2VSWRMax 2.5:1 3Peak Gain [dBi]typ. 3.5 4TotalAvg. Gain [dBi]typ. -0.22 5Efficiency [%]typ. 95 6PolarizationLinear 7Impedance [Ω]Nominal 50 The results are measured on the 10x43mm 2 evaluation board(EVB). See Page 6. for more detail gain parameter NoItemSpec.Remark 1Dimensions (LxWxH)9.0x3.0x1.2 mm 3 2Unit Weighttyp. 97 mg 3Operating Temperature-35 ~ +85 °C 1.1 Electrical Specifications 1.2 Mechanical Specifications NoItemFunctionMaterial ①External ElectrodeSoldering, Input PortAg/Ni/Sn ② Direction indexIndication of Ceramic ③Ceramic Body -Ceramic ④Model No. index-Ceramic ⑤External ElectrodeSolderingAg/Ni/Sn 1.3 Appearance & Material 1. Specifications ③ ④ ⑤ ② ① 0.7±0.2 9.0±0.3 3.0±0.2 Side 1.2±0.2 A50600 (unit : mm) Datasheet / Multilayer Chip Antenna / 2.4GHz ALA931C5 (Rev 6.0) 4 2.1 Evaluation Board Dimension 2.2 PCB Design Guide 2. PCB Design for Test NoPin Assignment ① Feeding ②N.C Matching Component [unit : mm] Evaluation board size ~ 10x43 Fill Cut Area (GND Clearance) ~ 10x13 [PCB Solder Land] 50 Ohm Feeding Line ① ② Chip Antenna Matching Stage SMA Connector GND [Unit : mm] Datasheet / Multilayer Chip Antenna / 2.4GHz ALA931C5 (Rev 6.0) 5 3.1 Typical Measurement Result (VSWR/RL, Smithchart) 3. Measurement Result The results are measured on the 10x43mm 2 evaluation board(EVB). NoMatching Value ①N.C ②2.7 nH ③ 1.2 nH ③① ② Datasheet / Multilayer Chip Antenna / 2.4GHz ALA931C5 (Rev 6.0) 6 [Azimuth plane @2.45GHz ] [Elevation1 plane @2.45GHz ] [Elevation2 plane @2.45GHz ] [3D Radiation Pattern] 3.2 Typical Measurement Result (Gain, Radiation Pattern) x y z -y Azimuth E1 E2 Peak Gain (dBi) Avg. Gain (dBi) Total Avg. Gain (dBi) Efficiency (%) Azimuth 2.81.0 -0.2295 Elevation 1 3.5-0.7 Elevation 2 1.7-1.6 Datasheet / Multilayer Chip Antenna / 2.4GHz ALA931C5 (Rev 6.0) 7 NoItemTest ConditionTest Requirements 1 Adhesive Strength of Termination 1.Applied force on SMT chip till detached point from PCB. 1. No mechanical damage by applied force 2. Strength (F) > 7 kgf 2 Thermal Shock (Cycle) 1. Step 1 : -40 ±3°C, 30 min Step 2 : +125 ±3°C, 30 min 2. Number of cycle : 30 1. No visual damage 2. Within electric spec (VSWR) 3 High Temperature Resistance 1. Temperature : +125 ±5°C 2. Time : 1000 ±24 hrs 1. No visual damage 2. Within electric spec (VSWR) 4 Low Temperature Resistance 1. Temperature : -40 ±5°C 2. Time : 1000 ±24 hrs 1. No visual damage 2. Within electric spec (VSWR) 5Humidity 1. Humidity : 85 % RH Temperature : +85 ±3°C 2. Time : 1000 ±24 hrs 1. No visual damage 2. Within electric spec (VSWR) F SMD PAD PCB 4. Reliability 5. Soldering Reflow Profile Datasheet / Multilayer Chip Antenna / 2.4GHz ALA931C5 (Rev 6.0) 8 ItemSpec.ItemSpec.ItemSpec. A03.30±0.10P04.00±0.10E1.75±0.10 B09.30±0.10P18.00±0.10F7.50±0.10 K01.30±0.10P22.00±0.10W16.00±0.30 D01.55±0.05--t0.30±0.05 Item QuantityDimension Reel1,000eaΦ7” * 12mm Inner Box3,000ea (3 reel)185 * 185 * 68 (mm 3 ) Outer Box115,000ea (5 Inner Box)375 * 200 * 205 (mm 3 ) Outer Box230,000ea (10 Inner Box)390 * 375 * 205 (mm 3 ) 6.1 Carrier Tape Dimension 6.2 Packaging Quantity 6.3 Packaging Label 6. Packaging AMOTECH Co., Ltd. 5BL-1Lot, 617, Namchon-Dong, Namdong-Gu, Incheon, Korea Multilayer Chip Antenna P/N : ALA931C5 Lot No : Quantity : 1,000 pcs Date : 2010/01/19

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 1 of 49 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. FCC TEST REPORT Test report No.: EMC- FCC- R0079 FCC ID: P7KRVM-704M Type of equipment: RearView Monitor Model Name: RVM-704M Brand Name: - Applicant: Diasonic Technology Co., Ltd. FCC Rule Part(s): FCC Part 15 Subpart C Section 15.203, Section 15.209 Section 15.207, Section 15.247 ANSI C63.4 2009 ANSI C63.10 2009 Frequency Range: 2 402 MHz ~ 2 480 MHz Test result: Complied The above equipment was tested by EMC compliance Testing Laboratory for compliance with the requirements of FCC Rules and Regulations. The results of testing in this report apply to the product/system which was tested only. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date of test: September 10, 2012 ~ September 14, 2012 Issued date: September 27, 2012 Tested by: Approved by: . LEE, CHANG WON KIM, CHANG MIN http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 2 of 49 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. [ Contents ] 1. Client information ...................................................................................................................................... 3 2. Laboratory information ............................................................................................................................. 4 3. Description of E.U.T. .................................................................................................................................. 5 3.1 Basic description .................................................................................................................................. 5 3.2 General description .............................................................................................................................. 5 3.3 Test frequency ...................................................................................................................................... 6 3.4 Test Voltage .......................................................................................................................................... 6 4. Summary of test results .............................................................................................................................. 7 4.1 Standards & results ............................................................................................................................. 7 4.2 Uncertainty .......................................................................................................................................... 7 5. Test results .................................................................................................................................................. 8 5.1 Antenna Requirement .......................................................................................................................... 8 5.2 Maximum Peak Output Power ............................................................................................................ 9 5.3 Carrier Frequency Separation ............................................................................................................13 5.4 20 dB Channel Bandwidth ..................................................................................................................17 5.5 Number of Hopping Channels ............................................................................................................21 5.6 Time of Occupancy(Dwell Time) ........................................................................................................23 5.7 SPURIOUS EMISSION, BAND EDGE, AND RESTRICTED BANDS ............................................27 5.8 Peak Power Spectral Density ..............................................................................................................42 5.9 Conducted Emission ...........................................................................................................................46 5.10 RF Exposure ......................................................................................................................................48 6. Test equipment used for test ......................................................................................................................49 Appendix 1 Test setup photos Appendix 2 External photos of EUT Appendix 3 Internal photos of EUT Appendix 4 Block diagram Appendix 5 Schematics Appendix 6 User manual Appendix 7 Part list Appendix 8 Layout diagram Appendix 9 Antenna Specification http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 3 of 49 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. 1. Client information Applicant: Diasonic Technology Co., Ltd. Address: #321-43, Suksu-dong, Manan-ku, Anyang-city, Kyungki-do, Korea. Telephone number: +82-31-474-0852 Facsimile number : +82-31-474-0856 Contact person: Min-Hwan Kim / [email protected] Manufacturer: Diasonic Technology Co., Ltd. Address : #321-43, Suksu-dong, Manan-ku, Anyang-city, Kyungki-do, Korea. http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 4 of 49 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. 2. Labo…

Text truncated - open the document above for the full version.

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 1 of 2 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Appendix 1 Test setup photos - Below 1 GHz - Above 1 GHz http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0079 EMC compliance Ltd. Page: 2 of 2 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. - Below 30MHz