P9BPSD64NPortable Storage Device

NEXDISK User Manual ¾ Product Materials and Detailed Part Description ¾ Product Features ¾ Product Specification ¾ Product Installation ¾ Program Use ¾ Product Usage ¾ Caution ¾ FCC Compliance Statements - NEXDISK - USB Extension Cable - Portable Neck Strap - Application CD - User Manual 1. Write Protect Switch: To prevent NEXTDISK to write, switch to ±. 2. Portable Neck Strap: NEXDISK Portable Neck Strap hook. 3. Pocket Clip: To securely clip to pocket or backpack, etc. 4. CAP : To protect USB connection head. 5. LED Indicator: (1) Green LED : Lit when NEXDISK is connected to PC (2) Red LED : Lit when NEXDISK is in activity. „ Driver not necessary NEXDISK can Plug & Play without any software. (However, Windows 98 requires specific driver that is provided by JUNGSOFT) „ Power Adapter not necessary By using USB BUS Power NEXDISK does not need extra power source. „ Bootable Media Just like making Floppy into bootable diskette, NEXDISK is able to make itself a bootable media. Like FDD, CDR, HDD is independently capable of booting the system. (*Motherboard that supports USB booting) „ Write Protect Switch User is able to read the contents of the disk, however, is prohibited from unauthorized writing or misuse. „ Software Security (PASSWORD) NEXDISK has ability to lock itself with password. Competitor products require other media such as Floppy or CD to unlock device, however, NEXDISK is already installed with software that handles this capability and therefore does not require extra media. „ Dual Colored LED Indicate power going through the USB disk and monitor activity of the disk. Product Code PSD-32N / PSD-64N / PSD-28N Interface USB 1.1 Data Transfer Rate Write : 900 KB/Sec Ready : 600 KB/Sec Size 80 * 20 * 9.5mm( Cap included ) 70 * 20 * 9.5mm ( Cap Excluded ) Weight 15g Power USB bus power O.S Support MS-DOS, Windows 98SE/Me/2000/XP or higher, Mac 9.0 or higher, Linux2.4.0 or higher, WinCE3.0 or higher Application Desktop PC, Notebook PC, PDA etc, All PCs that support USB Standard Certification MIC, FCC, CE, USB Operating Environment Operating Temp: 0c or higher Maintained Temp : -20c ~ 80c Maintained Humidity : 5% ~ 90% A. Hardware Installation - Connect NEXDISK to PC. - Or Connect extended USB cable to PC and connect NEXDISK through it. - Comes up in My Computer as Removable Media. [ Caution] In encrypted password mode contents of the information does not appear. B . Installing Driver( For Windows98 Users Only) - Other OS do not need installation drivers. - Installation with Installation CD or Download from our Website (www.jungsoftusa.com) - Select “\DRIVER98\PSDUA.INF”and install. A. Format & Mode Selection Program All contents of the information is formatted and initialized. - Connect NEXDISK to USB Port. - Run“NEXDISK.exe” in installation CD. - In order to use Password Lock Mode check “Password Mode”or else leave the check box empty. - In order to use Bootable Media option, check “Make Bootable Media” - Select Format type. “Quick Format”, “Format” - When you press “Start”, Format is initiated. Indicated below is progress of the format. - When format is completed the following window appears. Caution : Bootable Media selection is only available in Windows 98 or ME. B. To Disable Password Lock - In order to access NEXDISK that has a password lock mode enabled Use program “NEXPASS.exe” and input password. - Default password is “1234”. Password can be up to 20 alphanumeric characters. - After password is input, NEXDISK is enabled for use. CAUTION : Please do not forget your password. Only people that have the password can use the media. A. Typical Usage - Use just like a regular Hard Disk. B. Booting Mode Option - Configure CMOS Setup, 1 ST BOOT DEVICE to be USB ZIP. - When system is rebooted computer will boot from USB. C. NEXDISK Usage in MS-DOS - After copying MS-DOS boot files to the NEXDISK and boots from it, user is able to access contents of the files from A:\ prompt. 1. Things that you need to remember while using NEXDISK A. If you remove NEXDISK while the LED indicator is red, data might be lost or corrupted . B. It is impossible to use NEXDISK again if you lose your password, so please take caution not to forget passwords. C. JUNGSOFT is not responsible for lost data even if product is defective. Please test the product initially. 2. Service A. After purchase, Jungsoft will provide users with one year of tech support and product replacement. However, mis-use of the product or damage caused by natural disaster will not be covered and users will be charged. B. Damage caused by impact, water, and disassembly of the product is not covered by the service. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates ,uses and can radiate radio frequency energy and ,if not installed and used in accordance with the instruction , may cause harmful interference to radio communication. However , there is no guarantee that interference will not occur in a particular installation. If this equipment dose harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures : -- Reorient or relocate the receiving antenna -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio / TV technician for help. Warning : Your are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment. NOTE : This unit was tested with shielded cables on the peripheral device .…

Text truncated - open the document above for the full version.

Model : PSD64N Test Report No. : 02BWS008.FCC APPENDIX 1 PHOTOs of EUT 2002 BWS Tech, Inc. FCC ID : P9BPSD64N Page 1 of 3 Model : PSD64N Test Report No. : 02BWS008.FCC A1-1 External Photo of EUT() A1-2 External Photo of EUT() 2002 BWS Tech, Inc. FCC ID : P9BPSD64N Page 2 of 3

Model : PSD64N Test Report No. : 02BWS008.FCC APPENDIX 2 ID Label and Location 2002 BWS Tech, Inc. FCC ID : P9BPSD64N Page 1 of 3 Model : PSD64N Test Report No. : 02BWS008.FCC A2-1 Label Requirements A Class B digital equipment subject to certification by the FCC shall carry a warning label which includes the following statements: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This statement should be stuck in a conspicuous location on the device. If impossible, this warning label should be placed in a prominent location in the user’s manual. A2-2 Label Drawing : This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This devices may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Model No : PSD64N FCC ID : P9BPSD64N Made in Korea Jungsoft Co. Ltd. A2-3 Label Location : Bottom side of EUT 2002 BWS Tech, Inc. FCC ID : P9BPSD64N Page 2 of 3 Model : PSD64N Test Report No. : 02BWS008.FCC A2-4 Warning Labels Operation manuals for Class B computing devices shall contain the following statements or their equivalent : Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. y NOTE: You are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment. In case that shielded cables were used on the test, operation manuals shall contain the following statements or their equivalent : y NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to insure compliance. 2002 BWS Tech, Inc. FCC ID : P9BPSD64N Page 3 of 3

Model : PSD64N Test Report No. : 02BWS008.FCC A1-3 Internal Photo of EUT A1-4 Internal Photo of EUT 2002 BWS Tech, Inc. FCC ID : P9BPSD64N Page 3 of 3

Model : PSD64N Test Report No. : 02BWS008.FCC BWS Tech, Inc. 294-9, Jungdae-Dong, Gwangju-City, Gyeoeonggi-Do 464-809 Korea TEL: 82 31 764 0125 FAX: 82 31 764 0126 FCC EMI TEST REPORT Date of Test : Mar. 06 - 08, 2002 Test Report No. : 02BWS008.FCC Test Site : BWS Tech, Inc. (Registration No. : 553281) Trade Name : N/A Manufacturer : Jungsoft Co., Ltd. Address : #274-5, Seohyun-Dong, Bundang-Gu, Seongnam-City, Gyeonggi-Do, Korea Korea. Contact Person : GyooHo Kim, Director Tel No. : 82-31-788-5200 Fax No. : 82-31-708-3477 Product : NEXDISK Model : PSD64N Fcc Rule Part(s) : FCC Part 15 Subpart B Classification : Class B The device bearing the trade name and model specified above has been shown to comply with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C.63.4-2000. I attest to the accuracy of data and all measurement reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualification of all persons taking them. 2002. 03.08 TaeHyun Nam President-BWS Tech, Inc. http://www.approvalspecialists.co.kr  BWS Tech, Inc. FCC ID : P9BPSD64N Page 1 of 15 Model : PSD64N Test Report No. : 02BWS008.FCC TABLE OF CONTENTS PAGE 1. Description of device 3 1.1 General 3 1.2 EUT Description 3 2. Test facility 4 3. Summary of results 4 3.1 Electromagnetic Emission 4 3.2 Modifications to the EUT 4 4. Tested system details 5 4.1 Peripherals and Others 5 4.2 Type of Cables Used 5 4.3 System layout on EUT and peripherals 6 5. Test result 7 5.1 RFI Voltage Measurement 7 5.2 RFI Field Strength Measurement 8 5.3 Minimum Margin 13 5.4 Sample Calculations 13 6. Test Equipments 14 7. Measurement Photos 15 7.1 Setup with RFI Voltage Emission Level 15 7.2 Setup with RFI Field Strength Emission Level 16  BWS Tech, Inc. FCC ID : P9BPSD64N Page 2 of 15 Model : PSD64N Test Report No. : 02BWS008.FCC 1. DESCRIPTION OF DEVICE 1.1 General Responsible Party Jungsoft Co., Ltd. Contact Person GyooHo Kim Tel No. : 82-2-431-8471 Fax No. : 82-2-431-8472 Manufacturer Jungsoft Co., Ltd. #274-5, Seohyun-Dong, Bundang-Gu, Seongnam- City, Gyeonggi-Do, Korea. • Trade name N/A • Model name PSD64N • EUT Type NEXDISK • Classification FCC Part 15 Subpart B Class B • Clock Speed Controller : 8 MHz • Rule Part(s) FCC Part 15 & Part 2 • Test Procedure(s) ANSI C63.4-2000 • Date of Tests Mar. 06 - 08, 2002 • Place of Tests BWS Tech, Inc. 1.2 EUT Description This equipment is portable storage device of USB interface made using Flash Memory. As it transfers data using just USB port, it doesn’t additive cable or power. 5 Note. This report may be reproduced in full. Partial reproduction may only be made with the written permission of the laboratory. The results in this report is only applied to the sample(s) tested. 5 Note. Please refer to the duties and responsibilities of the Responsible Party attached.  BWS Tech, Inc. FCC ID : P9BPSD64N Page 3 of 15 Model : PSD64N Test Report No. : 02BWS008.FCC 2. TEST FACILITY The open field test site and conducted measurement facility used for this measurement, is located following address. This site was fully described in a report dated Dec. 26, 2001 that was submitted to the FCC. Our site and facility had been accepted in a letter dated Dec. 26, 2001(Registration No. : 553281) : BWS Tech, Inc. Address : 294-9, Jungdae-Dong, Gwangju-City, Gyeonggi-Do 464-080 Korea The detailed description of the measurement facility was found to be in compliance with the requirements of 2.948 according to ANSI C63.4 on Dec. 08, 2000. 3. SUMMARY OF RESULTS 3.1 Electromagnetic Emission RFI Voltage Measurement PASS RFI Field Strength Measurement PASS Although the measured emissions indicate that the EUT complies with the required limits, some measurement are close to these limits. When the uncertainty of measurement is considered, there is some possibility that the EUT may not be compliant. 3.2 Modifications to the EUT : None  BWS Tech, Inc. FCC ID : P9BPSD64N Page 4 of 15 Model : PSD64N Test Report No. : 02BWS008.FCC 4. TESTED SYSTEM DETAILS 4.1 Peripherals and Others : Description Model Name Serial No. Manufacturer FCC ID Computer KAYAK 5064-7432A034598 HP DoC Keyboard RT235BTW B13BC90L39GU Compaq AQ6-22K15 PS2 Mouse M-S34 F13490N5BGF Compaq DZL211029 Serial Mouse #1 OK-520 00DAC0231 A4 TECH DoC Serial Mouse #2 Pro Mouse II 96002117 NEOTEC FSUGMZC7 Joystick GAMEPAD USB S1050910000564 CREATIVE DoC Printer STYLUS PHOTO 750 BRL0009512 SEIKO EPSON CORP - NEXDISK PSD64N - Jungsoft Co., Ltd. EUT 4.2 Type of Cables Used: Device from Device to Type of Cable Length Type of shield Computer Monitor Signal cable 1.0 Shielded Computer Keyboard Signal cable 1.0 Shielded Computer PS2 Mouse Signal cable 1.0 Shielded Computer Mouse #1,#2 Signal cable 1.0 Shielded Computer Joystick Signal cable 1.2 Shielded Computer Printer Signal cable 1.0 Unshielded Power Cable Power - 1.5 Unshielded  BWS Tech, Inc. FCC ID : P9BPSD64N Page 5 of 15 Model : PSD64N Test Report No. : 02BWS008.FCC 4.3 System layout on EUT and peripherals E U T Monitor PC MousePrinter Joystick Keyboard Mouse Mouse <Figure 4-1 System layout>  BWS Tech, Inc. FCC ID : P9BPSD64N Page 6 of 15 Model : PSD64N Test Report No. : 02BWS008.FCC 5. TEST RESULT 5.1 RFI Voltage Measurement 5.1.1 Measurement Instrumentation Used Measurement Instrument ......... (model/serial no./manufacturer/last calibration/next calibration) EMI Receiver ......................(ESH3/892580/R&S/01 Jun. 2001/Jun. 2002) L.I.S.N ..............................(L3-25/1110K70403/PMM/01 Sep. 2001/Sep. 2002) Coaxial cable .......................(RG213U/---/MARLOW/-/-) Shield Room ........................(JASH01/---/SEMITECH/---/---) 5.1.2 Measurement Procedure The power line conducted interference measurement were performed according to ANSI C63.4-2000 in a…

Text truncated - open the document above for the full version.

Model : PSD64N Test Report No. : 02BWS008.FCC 7. MEASUREMENT PHOTOS 7.1 Setup with the Maximized RFI Voltage Emission Level 7.2 Setup with the Maximized RFI Field Strength Emission Level  BWS Tech, Inc. FCC ID : P9BPSD64N Page 15 of 15