PANBT378Digital Bluetooth Music Receiver

IEEE 802.11b/g/n NFC Bluetooth Music Receiver BT-378 User Manual VERSION 1.0 © All rights reserved. All trade names are registered trademarks of respective manufacturers listed. This manual may not be copied in any media or form without the written consent of original maker. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 晶訊科技股份有限公司 8F, No. 150, Jian Yi Road, Zhonghe District , CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 2 Overview BT‐378 is a class 2 NFC Bluetooth Music Receiver that allows a music player, such as iPhone TM , Android TM smart phone, or MP3 player to stream music to an external Speaker wirelessly. Designed with the CSR BC05 chip solution, it has 3.5” audio jack for external speakers. Moreover, it is equipped with an NFC tag that enables smart phone with NFC to retrieve BT‐378 BT address and device name to further simplify user experience. In case of Android 4.1 smart phone with NFC, you tap the phone to BT‐378 for auto‐pairing. An LED indicator for link/pairing is also provided. Features „ Fully compliant with Bluetooth v2.1+EDR „ Support Bluetooth A/V profile (AADP) „ Support NFC Forum Type 2 Tag „ 2.4~2.4835GHz ISM band „ Class 2 RF output, up to 10 meters of coverage area „ LED indicator for power and Bluetooth status „ Support 3.5” audio jack for analog Speaker Set Up 1. Connect the BT‐378 to an audio input on your home music system. 2. Connect the AC power adapter cable to BT‐378 power jack, and plug the AC adapter into a wall power outlet. 3. The blue LED light will flash once to indicate the unit is powered and is now ready to be paired to your Bluetooth smart device. For NFC ‐enabled smart devices running Android™ 4.1 or later The NFC auto‐connect feature is already configured within your smart device, so all you have to do is to tap the phone to BT‐378 to connect it. 晶訊科技股份有限公司 8F, No. 150, Jian Yi Road, Zhonghe District , CC&C Technologies, Inc. New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 3 For non‐NFC ‐enabled smart devices 1. Go to “settings” and make sure Bluetooth is turned on. 2. Follow your device’s normal Bluetooth connection process by searching for devices; once you have found the Bluetooth device labeled NFC BT, you should connect to it. 3. Now any music or audio you play will play through your music system. Reconnecting Your Device If you move out of range or turn off the Bluetooth feature on your mobile device, BT‐378 will disconnect from your device. To reconnect, simply access the Bluetooth Manager on your device and select the appropriate device listed. Changing Connected Device If you want to switch from one device to another, follow these steps: 1. End the existing Bluetooth connection with the connected device by either disconnecting within your “settings” or turning off Bluetooth. 2. BT‐378 can now be connected to a different smart mobile device. 3. Follow the directions in “Pairing Your Bluetooth Music Receiver” to connect a different device. Out of Range or Lost Signal If the music device is out of range (beyond 30 feet) of BT‐378 or if there is something blocking the Bluetooth signal, the LED light will turn off to indicate that the Bluetooth connection with the music device has been lost. To avoid a lost connection, move the music device back into range (within 30 feet), or reduce obstructions between the receiver and your smart device. Within 15 seconds, the connection will automatically be reestablished and the blue LED light will turn on. If the connection is lost for more than 15 seconds, the connection will need to be reestablished. Follow the directions in “Reconnecting Your Device.”

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Model : BT-378 FCC ID: PANBT378 made in China BT Music Receiver /w NFC 40mm 14mm

Page 4 Page 5 Page 6 Page 7 Page 8

FCC ID: PANBT378 Report No.: RF120831D10 Operational Description The device is a Frequency Hopping device with 79 hopping frequencies. The antenna type is Chip antenna and there is no antenna connector used. The EUT is a unit that contains a Bluetooth radio module. Bluetooth is a short-range wireless technology operating in the 2.4GHz band. It enables devices to have the ability to form networks and exchange information. The NFC module (NTAG203F) is a passive tag. The other instruction, please have a look at the user’s manual.

Report No: SA120831D10 1 of 5 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA120831D10 MODEL NO.: BT-378 FCC ID: PANBT378 RECEIVED: Aug. 30, 2012 TESTED: Sep. 4 ~ 6, 2012 ISSUED: Dec. 21, 2012 APPLICANT: CC&C Technologies Inc. ADDRESS: 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No: SA120831D10 2 of 5 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION .............................................................................................. 4 2. CONCLUSION ................................................................................................. 5 Report No: SA120831D10 3 of 5 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120831D10 Original release Dec. 21, 2012 Report No: SA120831D10 4 of 5 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Digital Bluetooth Music Receiver BRAND NAME: CC&C MODEL NO.: BT-378 APPLICANT: CC&C Technologies Inc. TESTED: Sep. 4 ~ 6, 2012 TEST ITEM: MASS-PRODUCTION STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Dec. 21, 2012 ( Celia Chen / Senior Specialist ) APPROVED BY : , DATE: Dec. 21, 2012 ( Ken Liu / Manager ) Report No: SA120831D10 5 of 5 Report Format Version 5.0.0 2. CONCLUSION No Evaluation Required if power is below this threshold: F(GHz) mW Low 2.402 24.58 High 2.480 Maximum measured transmitter power: Pout (dBm) Pout (mW) Conducted Power 4.5 2.8 EIRP Power 10.0 10.0 *Note: The antenna is Chip antenna with 5.5dBi gain Threshold for no SAR evaluation is 24.58mW Transmitter power is 10.0mW Conclusion: No SAR evaluation required since Transmitter Pout is below FCC threshold ---END---

Report No.: RF120831D10 1 of 47 Report Format Version 5.0.0 Reference No.: 120830D10 FCC TEST REPORT REPORT NO.: RF120831D10 MODEL NO.: BT-378 FCC ID: PANBT378 RECEIVED: Aug. 30, 2012 TESTED: Sep. 4 ~ 6, 2012 ISSUED: Dec. 21, 2012 APPLICANT: CC&C Technologies Inc. ADDRESS: 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120831D10 2 of 47 Report Format Version 5.0.0 Reference No.: 120830D10 Table of Contents RELEASE CONTROL RECORD................................................................................. 4 1. CERTIFICATION .............................................................................................. 5 2. SUMMARY OF TEST RESULTS ...................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................... 6 3. GENERAL INFORMATION .............................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ............................................................11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .............................................11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................ 12 4. TEST TYPES AND RESULTS ........................................................................ 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ...... 13 4.1.2 TEST INSTRUMENTS ................................................................................... 14 4.1.3 TEST PROCEDURES .................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD .......................................................... 15 4.1.5 TEST SETUP ................................................................................................. 16 4.1.6 EUT OPERATING CONDITIONS ................................................................... 16 4.1.7 TEST RESULTS ............................................................................................. 17 4.2 CONDUCTED EMISSION MEASUREMENT ................................................. 24 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................... 24 4.2.2 TEST INSTRUMENTS ................................................................................... 24 4.2.3 TEST PROCEDURES .................................................................................... 25 4.2.4 DEVIATION FROM TEST STANDARD .......................................................... 25 4.2.5 TEST SETUP ................................................................................................. 26 4.2.6 EUT OPERATING CONDITIONS ................................................................... 26 4.2.7 TEST RESULTS ............................................................................................. 27 4.3 NUMBER OF HOPPING FREQUENCY USED .............................................. 29 4.3.1 LIMIT OF HOPPING FREQUENCY USED .................................................... 29 4.3.2 TEST SETUP ................................................................................................. 29 4.3.3 TEST INSTRUMENTS ................................................................................... 29 4.3.4 TEST PROCEDURES .................................................................................... 29 4.3.5 DEVIATION FROM TEST STANDARD .......................................................... 29 4.3.6 TEST RESULTS ............................................................................................. 29 4.4 DWELL TIME ON EACH CHANNEL .............................................................. 31 4.4.1 LIMIT OF DWELL TIME USED....................................................................... 31 4.4.2 TEST SETUP ................................................................................................. 31 4.4.3 TEST INSTRUMENTS ................................................................................... 31 4.4.4 TEST PR…

Text truncated - open the document above for the full version.

1 of 2 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 of 2 RADIATED EMISSION TEST