PCSAPOLLO11282004Industrial Radio Remote Control

Nov 2004 Industrial Radio Remote Controlle r OPERATION GUIDE Our duty is ensure your safety, so you can rely on an excellent device Note: The device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference , and (2) This device must not accept any interference received, including interference that may cause undesired operation. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. TABLE OF CONTENTS INTRODUCTION.......................................................................................................................................3 MODEL OPTIONS..................................................................................................................... 3 TECHNICAL SPECIFICATIONS.................................................................................................... 4 H OW TO INSTALL..................................................................................................................... 4 OPERATION STEPS.................................................................................................................. 5 F UNCTION SETTING................................................................................................................. 6 F UNCTION SWITCH FOR MULTI-HOIST ....................................................................................... 8 AUTO SHUT DOWN & AUTO SLEEP MODE.................................................................................. 9 S TATUS INDICATOR ................................................................................................................. 9 P RECAUTION.......................................................................................................................... 10 ID LABEL................................................................................................................................11 SPARE PARTS PHOTO............................................................................................................. 11 SPARE PARTS LIST................................................................................................................. 12 TROUBLE SHOOTING ............................................................................................................... 13 T RANSMITTER & RECEIVER DIMENSION..................................................................................... 17 WIRING DIAGRAMS.................................................................................................................. 18 WARRANTY PERIOD ................................................................................................................ APOLLO C1-6PB 6 Push Buttons, we offer 4/6/8/10/12 push buttons C for Crane/Hoist used, 1 for single step, 2 for double steps, 3 for triple steps Model English Version Our duty is ensure your safety, so you can rely on an excellent device Introduction ☺ To satisfy various requests in remote controller, we are now finally researched a high quality, industrial grade remote controller --- APOLLO system. Provided 8 push buttons, further on you can decide if taking with reserved functions or not, and really feel the convenience! APOLLO system, a reliable, durable remote controller, which can be instead of the original wired control when the environment is too dangerous, something as electroplate field, steel factory, or the field temperature is too high. Of course, it can also raising the producing efficiency! Except the dust / water / oil proof casing, APOLLO can even resist strong shock, or the extreme weather. Our professionalism surpass the original design, improved possible faults, the section assembled push button parts save lots of pennies from unnecessary spend, which can also easily up-grade to different models. Your equipment does not have to adapt the remote controller, but it can really become an accessory! Once the transmitter housing has to be renewed, you can just exchanging the damaged section, but not the whole one. Only the reasonable spend can be accepted, in this point, we have considered thoroughly in APOLLO system. Take instant fix holder, APOLLO receiver makes installation steps much faster and easier. The internal diagram / components scheme are hundred percent precision but not complex, easy to understand and repair, specially save time in periodic maintenance. Components have been placed into a tough control box, protection ups to IP65, contains dust / water / oil and ultraviolet, light weight, easy carry on, save energy and time in device installation. Model Option ☺ Model No. description ONE STEP: C1-4PB 4 pushbuttons, w/ EMS stop button C1-6PB 6 pushbuttons, w/ EMS stop button C1-8PB 8 pushbuttons, w/ EMS stop button C1-8PB/AB 8 pushbuttons , A/B hoist use, w/ EMS stop button C211 1 st line two steps, 2 nd , 3 rd one step, w/ EMS stop button C1-10PB 10 pushbuttons, w/ EMS stop button C1-12PB 12 pushbuttons, w/ EMS stop button TWO STEPS: C2-4PB 4 pushbuttons, w/ EMS stop button C2-6PB 6 pushbuttons, w/ EMS stop button C2-8PB 8 pushbuttons, w/ EMS stop button C2-8PB/AB 8 pushbuttons , A/B hoist use, w/ EMS stop button C2-8PB/AL 8 pushbuttons, alarm & light, w/ EMS stop button C2-10PB 10 pushbuttons, w/ EMS stop button C2-12PB 12 pushbuttons, w/ EMS stop button ※ 3 steps are available on demand. Our duty is ensure your safety, so you can rely on an excellent device Transmitter Technical Specifications ☺ ¾ Take dual-security design, equipment protected thoroughly, every output will automatically break when CPU out of work. ¾ Take common mode non-earth ground EMI noise-rejection circuit, which can against receiver malfunction occ…

Text truncated - open the document above for the full version.

. . . . . . . . 3e 3-Elite Join Industrial Pte. Ltd 5F-7, No. 4. Lane 609, Sec 5 Chung Hsin Road, Sanchung City, Taipei Hsien, Taiwan TEL: 886-2-2278 7701 FAX: 886-2-2278 7703 http://www.craneparts.com.tw email: [email protected] FCC ID: PCSAPOLLO11282004 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Section 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. By: By: Janet Hung (Signature)(Printed) Title: Overseas Manager Applicant: 3-Elite Join Industrail Pte Ltd Address: 5F-7, No. 4, Lane 609, Sec 5 Chung Hsin Road, Sanchung City, Taipei Hsien, Taiwan Tel: 886-2-2278 7701 Fax: 886-2-2278 7703 Date: Nov 28 2004 E-mail: [email protected]

. . . . . . . . 3e 3-Elite Join Industrial Pte. Ltd 5F-7, No. 4. Lane 609, Sec 5 Chung Hsin Road, Sanchung City, Taipei Hsien, Taiwan TEL: 886-2-2278 7701 FAX: 886-2-2278 7703 http://www.craneparts.com.tw email: [email protected] Federal Communications Commission Dear Sir, We, the undersigned, hereby authorize ELECTRONICS TESTING CENTER, TAIWAN to act on our behalf in all matters relating to application for “ industrial radio remote control ( Model: C2-8PB, FCC ID No.: PCSAPOLLO11282004 ) ” authorization, including the signing of all documents relating to these matters. Any and all carried out by ELECTRONICS TESTING CENTER, TAIWAN on our behalf shall have the same effect as acts of our own. The applicant certifies that in the case of an individual applicant (e.g., corporation), no party to the applicant is subject to a denial of federal benefits, that includes FCC benefits, pursuant to section 5301 of the Anti-drug abuse Act of 1988.21 U.S.A. 862. For a definition of a “party” for these purposes See 47 C.F.R. 1.2002(b). By: By: Janet Hung (Signature)(Printed) Title : overseas manager Applicant : 3-Elite Join Industrial Pte Ltd Address : 5F-7, No. 4, Lane 609 , Sec 5 Chung Hsin Road, Sanchung City Taipei Hsien, Taiwan Tel : 886-2-2278 7701 Fax : 886-2-2278 7703 Date : Dec. 28 2004 E-mail : [email protected]

1 Helen Zhao Subject:FW: 3-Elite Join Industrial Pte Ltd, FCC ID: PCSAPOLLO11282004, Assessment NO.: AN04T4448, Notice#1 Operational Description.pdf Test report.pdfConfidentiality Request.pdf From: "Hsieh" To: "Helen Zhao" <[email protected]> Sent: Friday, January 07, 2005 10:18 AM Subject: Re: 3-Elite Join Industrial Pte Ltd, FCC ID: PCSAPOLLO11282004, Assessment NO.: AN04T4448, Notice#1 > Hi Helen, > > Attached please find the revised documents. > Thanks a lot for your remind. > Any other questions please feel free to contact with me. > > Best regards, > > Joe > > > -----Original Message----- > From: Compliance Certification Services [mailto:[email protected]] > Sent: Thursday, January 06, 2005 5:25 PM > To: Helen Zhao > Subject: 3-Elite Join Industrial Pte Ltd, FCC ID: PCSAPOLLO11282004, > Assessment NO.: AN04T4448, Notice#1 > > > Question #1: The FCC ID on confidentiality letter and Operational > Description (PCSAPOLLO20041128) is different from the FCC ID on form 731 > (PCSAPOLLO11282004). Please verify which one is correct and do necessary > modification. > > Question #2: Page 4 of the test report listed wrong frequency for channel > 18-20, please revise the test report. > > Best Regards, > Helen Zhao > > > The items indicated above must be submitted before processing can continue > on the above referenced application. Failure to provide the requested > information within 30 days of the original e-mail date may result in > application dismissal and forfeiture of the filing fee. Also, please note 2 > that partial responses increase processing time and should not be submitted. > Any questions about the content of this correspondence should be directed to > the e-mail address listed below the name of the sender. > > >

ETC Report No.: ET93S-11-049-01 Page A1 of A1 FCC ID:PCSAPOLLO11282004 ANNEX A: EXTERNAL CONSTRUCTION PHOTOS OF EUT 1. Outside view 1 of EUT 2. Outside view 2 of EUT

FCC ID Label / Location

ETC Report No.: ET93S-11-049-01 Page B1 of B3 FCC ID: PCSAPOLLO11282004 ANNEX B: INTERNAL CONSTRUCTION PHOTOS OF EUT 1. Inside View of EUT 2. Front view of PCB1 ETC Report No.: ET93S-11-049-01 Page B2 of B3 FCC ID: PCSAPOLLO11282004 3. Rear view of PCB1 4. Front view of PCB2 ETC Report No.: ET93S-11-049-01 Page B3 of B3 FCC ID: PCSAPOLLO11282004 5. Rear view of PCB2

ETC Report No. : ET93S-11-049-01Sheet 1 of 30 Sheets FCC ID.: PCSAPOLLO11282004 Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC 47 CFR, Part 15 Subpart C Report No.: ET93S-11-049-01 Client:3-Elite Join Industrial Pte Ltd Product:Industrial radio remote control Trade Name:Apollo Model No.:C2-8PB FCC ID:PCSAPOLLO11282004 Manufacturer/supplier:3-Elite Join Industrial Pte Ltd Date test item received:2004/11/04 Date test campaign completed:2004/12/10 Date of issue:2004/12/23 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 30 pages Total number of pages of photos: External photos 1 pages Internal photos 3 pages Setup photos 2 pages Test EngineerChecked ByApproved By MarkJoe HsiehTsung-Ching Lin ELECTRONICS TESTING CENTER, TAIWAN NO.8, LANE 29, WEN-MING RD., LO-SHAN TSUN, KUI-SHAN HSIANG, TAOYUAN HSIEN 333 TAIWAN, R.O.C. TEL: (03) 3276170~4 INT: +886-3-3276170~4 FAX: (03) 3276188 INT: +886-3-3276188 ETC Report No. : ET93S-11-049-01Sheet 2 of 30 Sheets FCC ID.: PCSAPOLLO11282004 Rev. No 1.0 TEST REPORT CERTIFICATION Client: 3-Elite Join Industrial Pte Ltd (Representative Office) Address: 5F-7 , No. 4, Lane 609, Sec 5 Chung Hsin Road, Sanchung City, Taipei Hsien, Taiwan Manufacturer: 3-Elite Join Industrial Pte Ltd Address: 5F-7 , No. 4, Lane 609, Sec 5 Chung Hsin Road, Sanchung City, Taipei Hsien, Taiwan EUT: Industrial radio remote control Trade name: Apollo Model No.: C2-8PB Power Source: 6V DC Regulations applied: FCC 47 CFR, Part 15 Subpart C (2003) The testing described in this report has been carried out to the best of our knowledge and ability, and our responsibility is limited to the exercise of reasonable care. This certification is not intended to believe the sellers from their legal and/or contractual obligations. The compliance test is only certified for the test equipment and the results of the testing report relate only to the item tested. The compliance test of this report was conducted in accordance with the appropriate standards. It’s not intention to assure the quality and performance of the product. This report shall not be reproduced except in full, without the approval of ETC. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. Laboratory Introduction: Electronics Testing Center, Taiwan is recognized, filed and mutual recognition arrangement as following:
ISO9001: TüV Product Service  ISO/IEC 17025: BSMI, CNLA, DGT, NVLAP, CCIBLAC, UL, Compliance  Filing: FCC, Industry Canada, VCCI  MRA: Australia, Hong Kong, New Zealand, Singapore, USA, Japan, Korea, China, APLAC through CNLA NVLAP Lab Code 200133-0 ETC Report No. : ET93S-11-049-01Sheet 3 of 30 Sheets FCC ID.: PCSAPOLLO11282004 Rev. No 1.0 Table of Contents Page 1. GENERAL INFORMATION ...................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION................................................................................................................................................. 4 1.2 CHARACTERISTICS OF DEVICE: ...................................................................................................................................... 4 1.3 TEST METHODOLOGY.................................................................................................................................................... 4 1.4 TEST FACILITY............................................................................................................................................................... 4 2. DEFINITION AND LIMITS........................................................................................................................................ 5 2.1 D EFINITION.................................................................................................................................................................... 5 2.2 RESTRICTED BANDS OF OPERATION............................................................................................................................... 5 2.3 LIMITATION.................................................................................................................................................................... 6 2.4 LABELING REQUIREMENT.............................................................................................................................................. 7 2.5 USER INFORMATION....................................................................................................................................................... 7 3. RADIATED EMISSION MEASUREMENT.............................................................................................................. 8 3.1 APPLICABLE STANDARD................................................................................................................................................. 8 3.2 MEASUREMENT PROCEDURE......................................................................................................................................... 8 3.3 TEST DATA.................................................................................................................................................................. 10 3.4 F IELD STRENGTH CALCULATION.................................................................................................................................. 22 3.5 RADIATED TEST EQUIPMENT....................................................................................................................................... 22 3.6 MEASURING INSTRUMENT SETUP................................................................................................................................. 23 4. BANDWIDTH OF EMISSION.........................................…

Text truncated - open the document above for the full version.

ETC Report No.:ET93S-11-049-01 Sheet 1 of 2 Sheets FCC ID.: PCSAPOLLO11282004 1. Radiated Measurement Photos ETC Report No.:ET93S-11-049-01 Sheet 2 of 2 Sheets FCC ID.: PCSAPOLLO11282004