PFK-478-01Light Meter

L-478D/L-478DR 1 Users’ Manual ProDigi Color C-500 Litemaster Pro L-478D / L-478DR L-478D/L-478DR 2 ©2012 SEKONIC Corporation All Rights Reserved. Thank you for purchasing our Litemaster Pro L-478D/L-478DR. Please read this Users’ Manual thoroughly in order to become acquainted with the light meter and thus be able to use it safely and correctly. The Litemaster Pro L-478D/L-478DR (referred to as L-478D/L-478DR from here on) comes with “color exposure profile” and “EV scale” functions that are highly compatible to digital cameras. What is more, it is a light meter packed with exceptional functions to deal with images and all sorts of filming intentions that require systems such as spot measuring, incident light measuring, flash measuring and partial metering. The L-478D/L-478DR makes outstandingly accurate measuring across a wide range come true in all shooting scenarios, whether they be outdoors or in. Using in advance the latest Data Transfer Software ※ 1 , you can set your camera exposure profiles ※ 2 in the L-478D/L-478DR (profiles for up to ten cameras). And, by calling up these settings when you need them, you can measure exposure accurately. Moreover, when metering light, you can check in an instant whether or not the subject is in the exposure range. Additionally, you also can make user and Custom Setting Function at the Data Transfer Software side. ※1 Data Transfer Software is provided on the CD-ROM. To use this software, you will need to install it onto your computer and connect it to L-478D/L-478DR via a USB cable. Please see the Users’ Manual on the CD-ROM for operating details. ※2 Exposure profile is the information denoting the characteristics of your digital single-lens reflex. (This is information such as sensor and circuit characteristics that occur for digital single-lens reflex, or the exposure tolerance and exposure range (reproduction field and tolerance range) that occur for film characteristics of a silver halide camera. First, authenticate the information by test shooting and then create exposure profiles using the Data Transfer Software. Caution 1. The reproduction of all or any part of this document without permission is strictly forbidden. 2. The product concerned and/or this manual may be subject to future changes without prior notification. 3. Please contact the store of purchase if you have any queries or questions about this product or this document. ©2012 SEKONIC Corporation All Rights Reserved. L-478D/L-478DR 3 ■ Accompanying Accessories The light meter and accompanying accessories below are packed together. Please check that all accessories are included when unpacking. If, by chance, something is missing, please contact the store of purchase. Startup Guide CD-ROM （Users’ Manual and Data Transfer Software） Two 4 AAA alkaline batteries Strap Soft case Reference ● Please see “7. Separately Sold Accessories” (P80) for details about available accessories. L-478D/L-478DR 4 ■For Safe and Correct Use Before using the light meter please be sure to read these safety precautions thoroughly and then use the light meter correctly at all times. This symbol denotes the possibility of user death or injury if the product is not used correctly. This symbol denotes that there is a possibility of slight to moderate injury to the user or a likely danger of material damage if the product is not used correctly. Caution: This symbol denotes operating cautions and/or restrictions. Be sure to read text accompanying this caution to prevent misoperation. Reference: This symbol denotes information concerning operation references and related functions. We recommend that you read this information. ● Keep the strap out of reach of babies and infants, as they may mistakenly wrap the strap around their necks, which could lead to the danger of suffocation. ● Do not place batteries in a flame, or short-circuit, or dismantle, or heat up, or recharge (unless the batteries are rechargeable), as doing so may cause the batteries to burst, which may in turn cause fire, injury and/or peripheral contamination. ● For L-478DR only: If user intentionally modifies or converts the L-478RD, there is a risk that doing so may violate the Radio Law, which may make the user liable to punishment according to the law. ● Do not use the product in the rain or locations where spray and/or moisture occur. Moreover, do not handle the product with wet hands. Failure to observe the above leads to the danger of electric shock when the product is in “Cord flash mode” (cord connected). Also, the product may become damaged. ● Never dismantle the main unit of this product. ● Do not play the accompanying CD-ROM in a music-type CD player, as there is a risk of hearing damage as well as damage to speakers and/or earphones. ● Use fingers to lightly touch the LCD when operating. Do not use sharp objects such as ballpoint pens or pencils, as doing so may damage the LCD or cause damage. ● Do not look directly at the sun via the viewfinder (sold separately), as doing so may damage eyesight. ● For L-478DR only: This product has certification of conformance to technical standards as specified low power radio equipment in compliance with the Radio Law (the user is not required to apply for a permit, etc., to use the equipment). Nevertheless, the following points must be observed when using L-478DR. ･ Do not dismantle and/or convert the product, as doing so is prohibited by law. ･ Do not peel off the label on the rear of the main unit, as using the product without that label attached is prohibited by law. ･ This product does not conform to radio laws outside of Japan; therefore, this product may only be used in Japan. The LCD is covered by a protective sheet. Please peel off this sheet before using the screen. Warning Caution Warning Caution L-478D/L-478DR 5 ■Table of Contents ■ Accompanying Accessories ......................................................................................................... 3 ■For Safe and Correct Us…

Text truncated - open the document above for the full version.

External Photograph for L-478DR July 18, 2012 SEKONIC CORPORATION Front Exterior Back Exterior Top Exterior Bottom Exterior Right Exterior Left Exterior

FCC ID:PFK-478-01 / IC:3916A-478001 HCT CO., LTD. 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO,KOREA TEL:+82 31 645 6467 FAX:+82 31 645 6401 www.hct.co.kr 1/3 1.1 ID Label Information Following is a copy of the label that will be placed on the rear side of the cabinet. Both the FCC ID and compliance statement are included in the product label Figure 1.1 PRODUCT LABEL FCC Model No :L-478DR IC Model :L-478DR FCC ID :PFK-478-01 IC :3916A-478001 EUT Type :Light Meter This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference , and (2) this device must accept any interference received, Includin g interference that may cause undesired operation. Legal Business Name SEKONIC CORPORATION Company Address 7-24-14, OIZUMI-GAKUEN-CHO, NERIMA-KU, TOKYO 178-8686 JAPAN MADE IN PHILIPPINES FCC ID:PFK-478-01 / IC:3916A-478001 HCT CO., LTD. 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYUNGGI-DO,KOREA TEL:+82 31 645 6467 FAX:+82 31 645 6401 www.hct.co.kr 3/3 1.2 Label Location Photos The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase.(Labeling requirements per 2.925) Figure 1.2 LABEL LOCATION ) FCC IC ID Label ラベル／１ ＪＲ2297010-00 福田 2012.05.30 CS5 福田ＰＣ Helvetica Medium - - - - 黒 - - - - １：１ １：１ アウトライン MADE IN PHILIPPINES MODEL L-478DR FCC ID : PFK -478 -01 IC : 3916A -478 001

Internal Photograph for L-478DR July 23, 2012 SEKONIC CORPORATION Back side without Battery Cover L-478DR Basic Internal Antenna PCB 1 Top View PCB 1 Bottom View PCB 2 Top View PCB 2 Bottom View PCB 3 Top View PCB 3 Bottom View PCB 4 (Antenna) Top View PCB 4 (Antenna) Bottom View

Model No. : L-478DR FCC ID: PFK-478-01 IC: 3916A-478001 MAXIMUM MODULATION PERCENTAGE (M%) L IMIT §15.35 (c) & IC RSS-Gen Issue 1 §4.3 The measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative(provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 seconds interval during which the field strength is at its maximum value. The exact method of calculating the average field strength shall be submitted with any application for certification or shall be retained in the measurement data file for equipment subject to notification or verification. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer or radiated field strength. The RBW is set to 300 kHz and the VBW is set to 300 kHz. The sweep time is coupled and the span is set to 0 Hz. The number of pulses is measured and calculated in 15.58 ms scan. CALCULATION Average Reading = Peak Reading(dBuV/m)+20log (Duty Cycle), Where Duty Cycle is (# of pu lses *pulse width)/100 or T (15.58 ms) = Peak Reading(dBuV/m)-15.6 RESULTS No non-compliance noted: MAXIMUM MODULATION PERCENTAGE One Period (ms) Pulse Width(*1 (ms) # of Pulses (*2 Duty Cycle % Duty Cycle 15.58 2.26625 * 10 -3 1142 0.1661 16.61 Note: (1) Pulse width(ms) = Spectrum Analyzer Trace Width per point = 18.13 ms/8000(number of Trace Data) = 2.26625 * 10 -3 (2) # of Pulses : Total number of Tace Data On-time points Model No. : L-478DR FCC ID: PFK-478-01 IC: 3916A-478001 Spectrum Analyzer Screen Copy Trace Data (Full Data) -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 0.00000 000 2.00000 000 4.00000 000 6.00000 000 8.00000 000 10.0000 0000 12.0000 0000 14.0000 0000 16.0000 0000 18.0000 0000 Time [msec] Level [dBm] REF 0.0dBm CENTER 347.000 MHz SPAN 0kHz RES BW 300.0kHz VBW 300.0kHz SWP 18.13msec Model No. : L-478DR FCC ID: PFK-478-01 IC: 3916A-478001 Trace Data (1 ms to 4 ms) -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 1.000000002.000000003.000000004.00000000 Time [msec] Level [dBm] Trace Data (6 ms to 9 ms) -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 6.000000007.000000008.000000009.00000000 Time [msec] Level [dBm] Model No. : L-478DR FCC ID: PFK-478-01 IC: 3916A-478001 Trace Data (12.5 ms to 15.5 ms) -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 12.5000000013.5000000014.5000000015.50000000 Time [msec] Level [dBm]

JAPAN QUALITY ASSURANCE ORGANIZATION Page 1 of 22 Technical document No. 23199-1201 JQA File No. : KL80120156R Issue Date : July 9, 2012 TEST REPORT Applicant : SEKONIC CORPORATION Address : 7-24-14, OIZUMI-GAKUEN-CHO, NERIMA-KU, TOKYO 178-8686 JAPAN Products : Light Meter Model No. : L-478DR Serial No. : 2 4 FCC ID : PFK-478-01 Test Standard : CFR 47 FCC Rules and Regulations Part 15 Test Results : Passed Date of Test : June 25 ~ 26, 2012 Kousei Shibata Manager Japan Quality Assurance Organization KITA-KANSAI Testing Center SAITO EMC Branch 7-3-10, Saito-asagi, Ibaraki-shi, Osaka 567-0085, Japan ● The measurement values stated in Test Report was made with traceable to National Institute of Advanced Industrial Science and Technology (AIST) of Japan and National Institute of Information and Communications Technology (NICT) of Japan. ● The applicable standard, testing condition and testing method which were used for the tests are based on the request of the applicant. ● The test results presented in this report relate only to the offered test sample. ● The contents of this test report cannot be used for the purposes, such as advertisement for consumers. ● This test report shall not be reproduced except in full without the written approval of JQA. ● VLAC does not approve, certify or warrant the product by this test report. VLAC-001-2 JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80120156R Issue Date : July 9, 2012 Model No. : L-478DR FCC ID : PFK-478-01 Standard : CFR 47 FCC Rules and Regulations Part 15 Page 2 of 22 Technical document No. 23199-1201 TABLE OF CONTENTS Page 1 Description of the Equipment Under Test...........................................................................................3 2 Summary of Test Results......................................................................................................................4 3 Test Procedure.......................................................................................................................................5 4 Test Location..........................................................................................................................................5 5 Recognition of Test Laboratory.............................................................................................................5 6 Details of the Equipment Under Test..................................................................................................6 7 Details of the Test Item.........................................................................................................................7 DEFINITIONS FOR ABBREVIATION AND SYMBOLS USED IN THIS TEST REPORT EUT : Equipment Under Test EMC : Electromagnetic Compatibility AE : Associated Equipment EMI : Electromagnetic Interference N/A : Not Applicable EMS : Electromagnetic Susceptibility N/T : Not Tested - indicates that the listed condition, standard or equipment is applicable for this report. - indicates that the listed condition, standard or equipment is not applicable for this report. JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80120156R Issue Date : July 9, 2012 Model No. : L-478DR FCC ID : PFK-478-01 Standard : CFR 47 FCC Rules and Regulations Part 15 Page 3 of 22 Technical document No. 23199-1201 1 Description of the Equipment Under Test 1. Manufacturer : SEKONIC CORPORATION 7-24-14, OIZUMI-GAKUEN-CHO, NERIMA-KU, TOKYO 178-8686 JAPAN 2. Products : Light Meter 3. Model No. : L-478DR 4. Serial No. : 2 4 5. Product Type : Prototype 6. Date of Manufacture : May, 2012 7. Power Rating : 3 VDC (for Battery) 8. EUT Grounding : None 9. Operating Frequency : 340 MHz – 354 MHz 10. Modulation : ON/OFF Keying 11. Antenna type : Integral PCB Antenna 12. Temperature Range : -10°C to 50°C 13. Received Date of EUT : June 5, 2012 JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80120156R Issue Date : July 9, 2012 Model No. : L-478DR FCC ID : PFK-478-01 Standard : CFR 47 FCC Rules and Regulations Part 15 Page 4 of 22 Technical document No. 23199-1201 2 Summary of Test Results Applied Standard : CFR 47 FCC Rules and Regulations Part 15 – Radio Frequency Devices Subpart C – Intentional Radiators The EUT described in clause 1 was tested according to the applied standard shown above. Details of the test configuration is shown in clause 6. The conclusion for the test items of which are required by the applied standard is indicated under the test result. - The test result was passed for the test requirements of the applied standard. - The test result was failed for the test requirements of the applied standard. - The test result was not judged the test requirements of the applied standard. In the approval of test results, - Determining compliance with the limits in this report was based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. - No deviations were employed from the applied standard. - No modifications were conducted by JQA to achieve compliance to the limitations. Reviewed by: Tested by: Shigeru Kinoshita Shigeru Osawa Deputy Manager Deputy Manager JQA KITA-KANSAI Testing Center JQA KITA-KANSAI Testing Center SAITO EMC Branch SAITO EMC Branch JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80120156R Issue Date : July 9, 2012 Model No. : L-478DR FCC ID : PFK-478-01 Standard : CFR 47 FCC Rules and Regulations Part 15 Page 5 of 22 Technical document No. 23199-1201 3 Test Procedure The tests documented in this report were performed in accordance with CFR 47 FCC Rules and Regulations Part 15 Subpart C – Intentional Radiators §15.231, §15.207 and §15.209 ANSI C63.4–2003 The test set-up was made in accordance to the general provisions of ANSI C63.4-2003. 4 Test Location Japan Quality Assurance Organization (JQA) KITA-KANSAI Testing Center 7-7, Ishimaru, 1-chome, Minoh-shi, Osaka, 562-0027, Japan SAITO EMC Branch 7-3-10, Saito-asagi, Ibaraki-shi, Osaka 567-0085, Japan 5 Recognition of Test Labo…

Text truncated - open the document above for the full version.

JQA File No. : KL80120156 Issue Date : July 9, 2012 Model No. : L-478DR FCC ID : PFK-478-01 Standard : CFR 47 FCC Rules and Regulations Part 15 Page 16 of 22 Technical document No. 23199-1201 7.2.6 Test Setup (Photographs) – X axis – – Y axis – JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80120156 Issue Date : July 9, 2012 Model No. : L-478DR FCC ID : PFK-478-01 Standard : CFR 47 FCC Rules and Regulations Part 15 Page 17 of 22 Technical document No. 23199-1201 – Z axis – The EUT position of the maximum emission at Horizontal Polarization is Y-axis. The EUT position of the maximum emission at Vertical Polarization is Z-axis. JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80120156 Issue Date : July 9, 2012 Model No. : L-478DR FCC ID : PFK-478-01 Standard : CFR 47 FCC Rules and Regulations Part 15 Page 22 of 22 Technical document No. 23199-1201 7.5.6 Test Setup (Photographs) JAPAN QUALITY ASSURANCE ORGANIZATION