PFK-758-01Eoposure / Light Meter

DIGITALMASTER L-758DR/L-758 Operating Manu al The Draft Version 㪈㪅㩷 㪧㪸㫉㫋㫊㩷㪛㪼㫊㫀㪾㫅㪸㫋㫀㫆㫅 㪉㪅㩷㪜㫏㫇㫃㪸㫅㪸㫋㫀㫆㫅㩷㫆㪽㩷㫋㪿㪼㩷㪣㫀㫈㫌㫀㪻㩷㪚㫉㫐㫊㫋㪸㫃㩷㪛㫀㫊㫇㫃㪸㫐 㪥㪦㪫㪜㪑㩷㪝㫆㫉㩷㪼㫏㫇㫃㪸㫅㪸㫋㫀㫆㫅㩷㫇㫌㫉㫇㫆㫊㪼㫊㪃㩷㫋㪿㪼㩷㪻㫀㫊㫇㫃㪸㫐㩷㫀㫃㫃㫌㫊㫋㫉㪸㫋㪼㪻㩷㪿㪼㫉㪼㩷㫊㪿㫆㫎㫊㩷㪸㫃㫃㩷㫀㪺㫆㫅㫊㩷㪸㫅㪻㩷㫉㪼㪸㪻㫆㫌㫋㫊㩷㫊㫀㫄㫌㫃㫋㪸㫅㪼㫆㫌㫊㫃㫐㪅㩷㪘㪺㫋㫌㪸㫃㩷 㪻㫀㫊㫇㫃㪸㫐㩷㫎㫀㫃㫃㩷㫅㪼㫍㪼㫉㩷㫊㪿㫆㫎㩷㪸㫊㩷㪸㪹㫆㫍㪼㪅㩷㩷 㪘㫌㫋㫆㩷㪜㫃㪼㪺㫋㫉㫆㪄㪣㫌㫄㫀㫅㪼㫊㪺㪼㫅㫋㩷㪛㫀㫊㫇㫃㪸㫐㩷㩿㪜㪣㪀㩷㩷 㪅 㩷㪠㫅㩷㫃㫆㫎㩷㫃㫀㪾㪿㫋㩷㩿㪜㪭㩷㪍㩷㫆㫉㩷㫃㪼㫊㫊㪀㪃㩷㪸㩷㪾㫉㪼㪼㫅㩷㪹㪸㪺㫂㫃㫀㪾㪿㫋㩷㫎㫀㫃㫃㩷㪸㫌㫋㫆㫄㪸㫋㫀㪺㪸㫃㫃㫐㩷㫀㫃㫃㫌㫄㫀㫅㪸㫋㪼㩷㫋㪿㪼㩷㪼㫅㫋㫀㫉㪼㩷㪣㪚㪛㪅㩷㩷 㪅 㩷 㪫㪿㪼㩷㪣㪚㪛㩷㫎㫀㫃㫃㩷㫅㫆㫋㩷㪹㪼㩷㪸㫌㫋㫆㫄㪸㫋㫀㪺㪸㫃㫃㫐㩷㫀㫃㫃㫌㫄㫀㫅㪸㫋㪼㪻㩷㪻㫌㫉㫀㫅㪾㩷㫄㪼㪸㫊㫌㫉㫀㫅㪾㪃㩷㫀㫅㩷㪚㫆㫉㪻㫃㪼㫊㫊㩷㪝㫃㪸㫊㪿㩷㫄㫆㪻㪼㩷㫆㫉㩷㪮㫀㫉㪼㫃㪼㫊㫊㩷㪽㫃㪸㫊㪿㩷㫉㪸㪻㫀㫆㩷 㫋㫉㫀㪾㪾㪼㫉㫀㫅㪾㩷㫄㫆㪻㪼㪅㩷㩷 㪅 㩷㪫㪿㪼㩷㪜㫃㪼㪺㫋㫉㫆㪄㫃㫌㫄㫀㫅㪼㫊㪺㪼㫅㫋㩷㪹㪸㪺㫂㫃㫀㪾㪿㫋㩷㫎㫀㫃㫃㩷㪸㫌㫋㫆㫄㪸㫋㫀㪺㪸㫃㫃㫐㩷㫋㫌㫉㫅㩷㫆㪽㪽㩷㪉㪇㩷㫊㪼㪺㫆㫅㪻㫊㩷㪸㪽㫋㪼㫉㩷㫃㪸㫊㫋㩷㫆㫇㪼㫉㪸㫋㫀㫆㫅㪅㩷㩷 㪛㫀㫊㫇㫃㪸㫐㩷㫀㫅㩷㫍㫀㪼㫎㪽㫀㫅㪻㪼㫉㩷 㽲㪤㪼㪸㫊㫌㫉㫀㫅㪾㩷㪤㫆㪻㪼㩷㪠㪺㫆㫅㫊㩷 㪘㫄㪹㫀㪼㫅㫋㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪈㪉㪀㩷 㪘㫌㫋㫆㪄㪩㪼㫊㪼㫋㩷㪚㫆㫉㪻㫃㪼㫊㫊㩷㪝㫃㪸㫊㪿㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪈㪏㪀㩷 㪚㫆㫉㪻㩷㪝㫃㪸㫊㪿㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪈㪎㪀㩷 㪮㫀㫉㪼㫃㪼㫊㫊㩷㪽㫃㪸㫊㪿㩷㫉㪸㪻㫀㫆㩷㫋㫉㫀㪾㪾㪼㫉㫀㫅㪾㩷㫄㫆㪻㪼㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪊㪋㪀㩷 㩷 㽳㪠㫅㪺㫀㪻㪼㫅㫋㩷㪆㩷㪩㪼㪽㫃㪼㪺㫋㪼㪻㩷㪪㫇㫆㫋㩷㪝㫌㫅㪺㫋㫀㫆㫅㩷㪠㪺㫆㫅㫊㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪏㪀㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫀㫅㩷㪠㫅㪺㫀㪻㪼㫅㫋㩷㫄㫆㪻㪼㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫀㫅㩷㪩㪼㪽㫃㪼㪺㫋㪼㪻㩷㪪㫇㫆㫋㩷㫄㫆㪻㪼㩷 㽴㪠㪪㪦㩷㪛㫀㫊㫇㫃㪸㫐㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪍㪀㩷 㪠㪪㪦䋱㩷㩷㩷 㪛㫀㫊㫇㫃㪸㫐㫊㩷㪠㪪㪦㩷㪽㫀㫃㫄㩷㫊㪼㫋㫋㫀㫅㪾㩷 㩷㩷㩷㩷㩷㪛㫀㫊㫇㫃㪸㫐㫊㩷㫊㪼㪺㫆㫅㪻㩷㪠㪪㪦㩷㪽㫀㫃㫄㩷㫊㪼㫋㫋㫀㫅㪾㩷㫎㪿㪼㫅㩷㪠㪪㪦㩷㪉㩷㪹㫌㫋㫋㫆㫅㩷㫀㫊㩷㫇㫉㪼㫊㫊㪼㪻㩷㩷 㽵㪝㫃㪸㫊㪿㩷㪘㫅㪸㫃㫐㫑㫀㫅㪾㩷㫀㫅㪻㫀㪺㪸㫋㫆㫉㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪊㪈㪀㩷 㪇㩷㫋㫆㩷㪈㪇㪇㩼㩷㫀㫅㩷㪈㪇㩼㩷㫀㫅㪺㫉㪼㫄㪼㫅㫋㫊㩷㩿㫇㪼㫉㪺㪼㫅㫋㪸㪾㪼㩷㫆㪽㩷㫋㪿㪼㩷㪽㫃㪸㫊㪿㩷㫀㫅㩷㫋㪿㪼㩷㫋㫆㫋㪸㫃㩷㪼㫏㫇㫆㫊㫌㫉㪼㪀㩷㩷 㽶㪜㫏㫇㫆㫊㫌㫉㪼㪆㪚㪸㫃㫀㪹㫉㪸㫋㫀㫆㫅㩷㪚㫆㫄㫇㪼㫅㫊㪸㫋㫀㫆㫅㩷㪻㫀㫊㫇㫃㪸㫐㩷 㪂㪆㪄㩷㩷㩷㩷㪜㫏㫇㫆㫊㫌㫉㪼㩷㪺㫆㫄㫇㪼㫅㫊㪸㫋㫀㫆㫅㪄㪄㪄㩷㪸㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫀㫋㩷㪿㪸㫊㩷㪹㪼㪼㫅㩷㪸㫇㫇㫃㫀㪼㪻㩷㫆㫅㩷㫄㪸㫀㫅㩷㪣㪚㪛㪅㩷 㪚㪸㫃㫀㪹㫉㪸㫋㫀㫆㫅㩷㪺㫆㫄㫇㪼㫅㫊㪸㫋㫀㫆㫅㪄㪄㪄㩷㪸㫇㫇㪼㪸㫉㫊㩷㫆㫅㫃㫐㩷㫀㫅㩷㫊㪼㫋㫋㫀㫅㪾㩷㫄㫆㪻㪼㪅㩷 㽷㪛㫀㪾㫀㫋㪸㫃㩷㪸㫇㪼㫉㫋㫌㫉㪼㩷㫍㪸㫃㫌㪼㪃㩷㪘㫇㪼㫉㫋㫌㫉㪼㩷㪧㫉㫀㫆㫉㫀㫋㫐㪃㩷㪜㪭㩷㪙㫉㫀㪾㪿㫋㫅㪼㫊㫊㩷㪛㫀㪽㪽㪼㫉㪼㫅㪺㪼㪃㩷㪘㫍㪼㫉㪸㪾㪼㩷㪽㫌㫅㪺㫋㫀㫆㫅㪃㩷㪜㪭㩷㪻㫀㫊㫇㫃㪸㫐㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫀㫅㩷㪘㫇㪼㫉㫋㫌㫉㪼㩷㪧㫉㫀㫆㫉㫀㫋㫐㩷㩿㪽㪆㫊㫋㫆㫇㪀㩷㫄㫆㪻㪼㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪈㪊㪀㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫌㫊㫀㫅㪾㩷㪹㫉㫀㪾㪿㫋㫅㪼㫊㫊㩷㪻㫀㪽㪽㪼㫉㪼㫅㪺㪼㩷㪽㫌㫅㪺㫋㫀㫆㫅㩷㩿㪪㪼㪼㩷㪧㪸㪾㪼㩷㪉㪋㪀㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫌㫊㫀㫅㪾㩷㪘㫍㪼㫉㪸㪾㫀㫅㪾㩷㪽㫌㫅㪺㫋㫀㫆㫅㩷㪸㫅㪻㩷㪹㫉㫀㪾㪿㫅㪼㫊㫊㩷㪻㫀㪽㪽㪼㫉㪼㫅㪺㪼㩷㪽㫌㫅㪺㫋㫀㫆㫅㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪉㪋㪀㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫌㫊㫀㫅㪾㩷㪜㪭㩷㫄㫆㪻㪼㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪈㪋㪀㩷㩷 㩷 In setting:ԟ Flash analyzing:ԛ Luminance :cd/FL(Only L-758CINE) ԝԜ 㪠㪪㪦㧞㩷 㽸㪘㫅㪸㫃㫆㪾㩷㫊㪺㪸㫃㪼㩷㩷 㪛㫀㫊㫇㫃㪸㫐㫊㩷㫄㪸㫉㫂㫊㩷㪸㫋㩷㪸㫇㪼㫉㫋㫌㫉㪼㫊㩷㫆㫉㩷㪣㪸㫋㫀㫋㫌㪻㪼㩷㫀㫅㪻㫀㪺㪸㫋㫀㫅㪾㩷㪽㫌㫃㫃㩷㫆㫉㩷㪈㪆㪊㩷㫊㫋㫆㫇㩷㫀㫅㪺㫉㪼㫄㪼㫅㫋㫊㩷㪽㫆㫉㩷㫄㪼㪸㫊㫌㫉㪼㫄㪼㫅㫋㫊㪃㩷㪸㫃㫊㫆㩷㪻㫀㫊㫇㫃㪸㫐㫊㩷㫋㪿㪼㩷 㫄㪼㫄㫆㫉㫀㫑㪼㪻㩷㪸㫅㪻㩷㪸㫍㪼㫉㪸㪾㪼㪻㩷㫍㪸㫃㫌㪼㫊㪅㩷 㪘㫇㪼㫉㫋㫌㫉㪼㩷㫊㪺㪸㫃㪼㩷㩿㫌㫇㫇㪼㫉㩷㫊㪺㪸㫃㪼㪀㪄㪄㪄㪽㩷㪇㪅㪎㩷㫋㫆㩷㪽㩷㪐㪇㩷㫀㫅㩷㪽㫌㫃㫃㩷㫊㫋㫆㫇㫊㩷㪸㫇㫇㪼㪸㫉㫊㩷㫀㫅㩷㪸㫃㫃㩷㫄㫆㪻㪼㫊㩷㪼㫏㪺㪼㫇㫋㩷㪸㫇㪼㫉㫋㫌㫉㪼㩷㫇㫉㫀㫆㫉㫀㫋㫐㩷㫄㫆㪻㪼㩷 㪣㪸㫋㫀㫋㫌㪻㪼㩷㫊㪺㪸㫃㪼㩷㩿㫃㫆㫎㪼㫉㩷㫊㪺㪸㫃㪼㪀㪄㪄㪄㪂㪆㪄㪎㩷㫊㫋㫆㫇㫊㩷㪽㫉㫆㫄㩷㪤㫀㪻㪅㪫㫆㫅㪼㩷㩿㪇㪀㩷㪸㫇㫇㪼㪸㫉㫊㩷㫀㫅㩷㪸㫇㪼㫉㫋㫌㫉㪼㩷㫇㫉㫀㫆㫉㫀㫋㫐㩷㫄㫆㪻㪼㪃㩷㫆㫉㩷㫆㫋㪿㪼㫉㩷㫄㫆㪻㪼㫊㩷㫀㪽㩷 㫊㪼㫃㪼㪺㫋㪼㪻㪅㩷 㩷㩷㪤㪼㪸㫊㫌㫉㪼㪻㩷㫍㪸㫃㫌㪼㩷㫊㪺㪸㫃㪼㩷 ع㪠㪺㫆㫅㫊㩷㪸㫇㫇㪼㪸㫉㩷㫋㫆㩷㫀㫅㪻㫀㪺㪸㫋㪼㩷㫄㪼㪸㫊㫌㫉㪼㪻㩷㫍㪸㫃㫌㪼㫊㩷㪹㪼㫃㫆㫎㩷㫋㪿㪼㩷㪸㫇㪼㫉㫋㫌㫉㪼㩷㫊㪺㪸㫃㪼㩷㫆㫉㩷㪸㪹㫆㫍㪼㩷㫋㪿㪼㩷㫃㪸㫋㫀㫋㫌㪻㪼㩷㫊㪺㪸㫃㪼㩷㪻㪼㫇㪼㫅㪻㫀㫅㪾㩷㫆㫅㩷 㫎㪿㫀㪺㪿㩷㫊㪺㪸㫃㪼㩷㪿㪸㫊㩷㪹㪼㪼㫅㩷㫊㪼㫃㪼㪺㫋㪼㪻㪅㩷 㩷 㩷㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪹㪼㫃㫆㫎㩷㪻㫀㫊㫇㫃㪸㫐㩷㫉㪸㫅㪾㪼㩷 㩷 㪙㫃㫀㫅㫂㫊㩷㫎㪿㪼㫅㩷㫌㫅㪻㪼㫉㩷㪼㫏㫇㫆㫊㪼㪻㩷㪹㪼㫃㫆㫎㩷㫄㪼㪸㫊㫌㫉㪼㫄㪼㫅㫋㩷㫉㪸㫅㪾㪼㩷 㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪸㪹㫆㫍㪼㩷㪻㫀㫊㫇㫃㪸㫐㩷㫉㪸㫅㪾㪼㩷 㩷 㪙㫃㫀㫅㫂㫊㩷㫎㪿㪼㫅㩷㫆㫍㪼㫉㩷㪼㫏㫇㫆㫊㪼㪻㩷㪸㪹㫆㫍㪼㩷㫄㪼㪸㫊㫌㫉㪼㫄㪼㫅㫋㩷㫉㪸㫅㪾㪼㩷 㪣㪸㫋㫀㫋㫌㪻㪼㪆㪻㫐㫅㪸㫄㫀㪺㩷㫉㪸㫅㪾㪼㩷㫀㫅㪻㫀㪺㪸㫋㫆㫉㫊㩷 䂥㩷 㪠㪺㫆㫅㫊㩷㪸㫇㫇㪼㪸㫉㩷㫋㫆㩷㫀㫅㪻㫀㪺㪸㫋㪼㩷㫃㪸㫋㫀㫋㫌㪻㪼㩷㫉㪸㫅㪾㪼㩷㫆㪽㩷㫊㪼㫃㪼㪺㫋㪼㪻㩷㪺㪸㫄㪼㫉㪸㩷㫇㫉㫆㪽㫀㫃㪼㩷㫆㫉㩷㪻㫐㫅㪸㫄㫀㪺㩷㫉㪸㫅㪾㪼㪅㩷 㩷 㽹㪪㪿㫌㫋㫋㪼㫉㩷㫇㫉㫀㫆㫉㫀㫋㫐㩷㫀㫅㪻㫀㪺㪸㫋㫆㫉㪃㩷㫊㪿㫌㫋㫋㪼㫉㩷㫊㫇㪼㪼㪻㩷㪻㫀㫊㫇㫃㪸㫐㩷㪽㫆㫉㩷㫊㫋㫀㫃㫃㩷㫇㪿㫆㫋㫆㪾㫉㪸㫇㪿㫐㩷㫆㫉㩷㪽㫉㪸㫄㪼㫊㩷㫇㪼㫉㩷㫊㪼㪺㫆㫅㪻㩷㩿㪽㪆㫊㪀㩷㪽㫆㫉㩷㪺㫀㫅㪼㫄㪸㫋㫆㪾㫉㪸㫇㪿㫐㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪪㪿㫌㫋㫋㪼㫉㩷㪧㫉㫀㫆㫉㫀㫋㫐㩷㩿㪫㪀㩷㫄㫆㪻㪼㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪈㪉㪀㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫊㪿㫌㫋㫋㪼㫉㩷㫊㫇㪼㪼㪻㩷㫀㫊㩷㫀㫅㩷㫄㫀㫅㫌㫋㪼㫊㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫊㪿㫌㫋㫋㪼㫉㩷㫊㫇㪼㪼㪻㩷㫀㫊㩷㫀㫅㩷㪽㫌㫃㫃㩷㫊㪼㪺㫆㫅㪻㫊㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪺㫀㫅㪼㩷㫊㫇㪼㪼㪻㩷㫀㫊㩷㫊㪼㫋㩷㫀㫅㩷㪽㫉㪸㫄㪼㫊㩷㫇㪼㫉㩷㫊㪼㪺㫆㫅㪻㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪈㪌㪀㩷 㽺㪙㪸㫋㫋㪼㫉㫐㩷㪧㫆㫎㪼㫉㩷㪠㫅㪻㫀㪺㪸㫋㫆㫉㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪌㪀㩷㩷 㽻㪤㪼㫄㫆㫉㫐㩷㪆㩷㪤㫌㫃㫋㫀㫇㫃㪼㩷㪝㫃㪸㫊㪿㩷㪠㫅㪻㫀㪺㪸㫋㫆㫉㩷㪛㫀㫊㫇㫃㪸㫐㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪤㫌㫃㫋㫀㩷㩿㪺㫌㫄㫌㫃㪸㫋㫀㫍㪼㪀㩷㪽㫃㪸㫊㪿㩷㫄㪼㪸㫊㫌㫉㪼㫄㪼㫅㫋㩷㫄㫆㪻㪼㩷㪸㫅㪻㩷㫊㪿㫆㫎㫊㩷㫋㪿㪼㩷㪺㫌㫄㫌㫃㪸㫋㪼㪻㩷 㫅㫌㫄㪹㪼㫉㩷㫆㪽㩷㫄㪼㪸㫊㫌㫉㪼㫄㪼㫅㫋㫊㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪉㪇㪀㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫉㪼㪸㪻㫀㫅㪾㩷㫀㫊㩷㫄㪼㫄㫆㫉㫀㫑㪼㪻㩷㪸㫅㪻㩷㫊㪿㫆㫎㫊㩷㫋㪿㪼㩷㫅㫌㫄㪹㪼㫉㩷㫀㫅㩷㫄㪼㫄㫆㫉㫐㩷㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪉㪊㪀㩷 㽼㪩㪸㪻㫀㫆㩷㫋㫉㫀㪾㪾㪼㫉㫀㫅㪾㩷㪺㪿㪸㫅㫅㪼㫃㩷㪸㫅㪻㩷㪨㫌㪸㪻㪄㫋㫉㫀㪾㪾㪼㫉㫀㫅㪾㩷㫑㫆㫅㪼㩷㪻㫀㫊㫇㫃㪸㫐㩷 㩿㪚㪟㩷䂔㪀㩷 㩷 㪚㪿㪸㫅㫅㪼㫃㩷㫅㫌㫄㪹㪼㫉㫊㩷 㩿䂓㪘㪃䂓㪙㪃䂓㪚㪃䂓㪛㪀㩷 㪨㫌㪸㪻㪄㫋㫉㫀㪾㪾㪼㫉㫀㫅㪾㩷㫑㫆㫅㪼㩷 㽽㪚㪸㫄㪼㫉㪸㩷㫇㫉㫆㪽㫀㫃㪼㩷㫊㪼㫃㪼㪺㫋㫀㫆㫅㩷㪻㫀㫊㫇㫃㪸㫐㩷 㽾㪬㪪㪙㩷㫀㪺㫆㫅㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪸㩷㪬㪪㪙㩷㪺㪸㪹㫃㪼㩷㫀㫊㩷㪺㫆㫅㫅㪼㪺㫋㪼㪻㩷㫋㫆㩷㪸㩷㫃㫀㪾㪿㫋㩷㫄㪼㫋㪼㫉㩷㪸㫅㪻㩷㪸㩷㪺㫆㫄㫇㫌㫋㪼㫉㪅㩷 㽿㩷㩷㩷㩷㩷㩷㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㫊㪿㫌㫋㫋㪼㫉㩷㪸㫅㪾㫃㪼㩷㫀㫊㩷㫊㪼㫋㩷㫋㫆㩷㪸㩷㫍㪸㫃㫌㪼㩷㫆㫋㪿㪼㫉㩷㫋㪿㪸㫅㩷㪈㪏㪇㩷㪻㪼㪾㫉㪼㪼㫊㩷㩿㪎㪌㪏㩷㪚㪠㪥㪜㪀㩿㫊㪼㪼㩷㫇㪸㪾㪼㩷㪈㪍㪀㩷 㾀㪠㫃㫃㫌㫄㫀㫅㪸㫅㪺㪼㩷㫄㪸㫉㫂㩷㪆㩷㪣㫌㫄㫀㫅㪸㫅㪺㪼㩷㫄㪸㫉㫂㩷㩿㪎㪌㪏㩷㪚㪠㪥㪜㪀㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪝㫆㫆㫋㪄㪚㪸㫅㪻㫃㪼㩷㫀㫊㩷㫊㪼㫃㪼㪺㫋㪼㪻㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪣㫌㫏㩷㫀㫊㩷㫊㪼㫃㪼㪺㫋㪼㪻㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪝㫆㫆㫋㪄㪣㪸㫄㪹㪼㫉㫋㩷㫀㫊㩷㫊㪼㫃㪼㪺㫋㪼㪻㩷 㪘㫇㫇㪼㪸㫉㫊㩷㫎㪿㪼㫅㩷㪚㪻㪆㫄 㪉 㩷㫀㫊㩷㫊㪼㫃㪼㪺㫋㪼㪻㩷 Warning: Changes or modifications to his unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the lim its for a Class B digital device, pursuant To Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harm ful interference to radio comm unication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determine by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: .* Reorient or relocate the receiving antenna. .* Increase the separation between the equipment and receiver. .* Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC rules and also with RSS-210 of Industry Canada. Operation is subject to the following two condition: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID : PFK-758-01 IC : 3916A-758001 FCC & IC compliance information:

1 Subject:FW: SEKONIC CORPORATION, FCC ID: PFK-758-01, Assessment NO.: AN06T5760, Notice#1 L-758DR 06516.pdf From: Takahashi Masanori Sent: Tuesday, May 16, 2006 10:42 PM To: Helen Zhao Subject: Re: SEKONIC CORPORATION, FCC ID: PFK-758-01, Assessment NO.: AN06T5760, Notice#1 Dear Ms.Helen I received the reply from our client (SECONIK CORPORATION) and it sent to you. >Question #1: Please advise the device size. If the device is larger than 8x10cm, please put 15.19(a)(3) statement on the FCC ID label: Reply #1: The maximum height size is about 165mm(The main body is about 120mm). The maximum length size is about 95mm(The main body is about 60mm). The maximum width size is about 45mm(The main body is about 27mm). It seems that the labelling statement put on the main body of the device is difficult by occasion of the following. Therefore, I(SEKONIC CORPORATION) want to write the statement in the manual. The space for the user to paste "Multi key operation table" to the battery lid is scheduled. And when the specification statement is pasted, it is not possible to use it. (photograph was attached) The battery lid has the possibility of the loss for the detaching parts. It is thought that impropriety to paste the specification statement. In other part, the character become to small, the decipherment is difficult. And it is impossible to paste it surely on the shape of the product. Because it is the above-mentioned situation, I would like the acknowledgment of the statement described to the manual. Sibcerely yours, Front Exterior L-758DR Back Exterior L-758DR 2006.5.16

Front Exterior L-758DR Front Exterior L-758CINE Back Exterior L-758DR Back Exterior L-758CINE Top Exterior Bottom Exterior Right Exterior Left Exterior

OO OO 㩿㪉㪑㪈㪀 MADE IN PHILIPPINES L - 758DR FCC ID : PFK - 758 - 01 IC : 3916A - 758001 JH1212150-00㧔☨࿖㧕 OO OO 㩿㪉㪑㪈㪀 MADE IN PHILIPPINES L - 758CINE FCC ID : PFK - 758 - 01 IC : 3916A - 758001 JH2212150-00㧔☨࿖㧕 Back Exterior L-758DR L-758CINE Label position

Basic Internal with Cover Basic Internal Back side without Battery Cover L-758DR Back side without Battery Cover L-758CINE PCB 1 Top View PCB 1 Bottom View RF Module PCB Top View RF Module PCB Bottom View PCB 2&3 Top view RF Module Case

JAPAN QUALITY ASSURANCE ORGANIZATION 21-25, KINUTA 1-CHOME, SETAGAYA-KU, TOKYO 157-8573 JAPAN PHONE +81-3-3416-0111, FAX +81-3-3416-9691 JQA File No. : 400-60004 Issue Date : May 10, 2006 Page 1 of 39 EMI TEST REPORT JQA File No. : 400-60004 Model No. : L-758CINE Type of Equipment : EXPOSURE / LIGHT METER Regulations Applied : CFR 47 FCC Rules and Regulations Part 15 FCC ID : PFK-758-01 Applicant : SEKONIC CORPORATION Address : 2714, Oaza-Ikeda, Ikeda-machi, Kita-Azumi-gun, Nagano-ken 399-8601, Japan Manufacture : SEKONIC CORPORATION Address : 2714, Oaza-Ikeda, Ikeda-machi, Kita-Azumi-gun, Nagano-ken 399-8601, Japan Received date of EUT : April 11, 2006 Test Result : Passed Test results in this report are obtained in use of equipment that is traceable to National Institute of Advanced Industrial Science and Technology (AIST) of Japan and National Institute of Information and Communications Technology(NICT) of Japan. The test results only respond to the tested sample. This report should not be reproduced except in full, without the written approval of JQA EMC Engineering Dept. Testing Div. JQA File No. :400-60004 FCC ID : PFK-758-01 Model No. :L-758CINE Issue Date :May 10, 2006 Standard :CFR 47 FCC Rules Part 15 Page 2 of 39 TABLE OF CONTENTS Page 1 Documentation 1.1 Test Regulation 3 1.2 General Information 3 1.3 Test Condition 4 – 8 1.4 EUT Modifications / Deviation from Standard 9 1.5 Test results 10 1.6 Summary 11 1.7 Test Configuration / Operation of EUT 12 1.8 EUT Arrangement(Drawing) 13 1.9 Preliminary Test and Test-setup (Drawings) 14 – 19 1.10 EUT Arrangement (Photographs) 20 – 21 2 Test Data 2.1 AC Power Line Conducted Emission N/A 2.2 Radiated Emission (Electric Field) 22 – 31 2.3 Frequency Stability N/A 2.4 Occupied Bandwidth 32 – 35 3 Appendix Test instruments List 36 – 39 JQA File No. :400-60004 FCC ID : PFK-758-01 Model No. :L-758CINE Issue Date :May 10, 2006 Standard :CFR 47 FCC Rules Part 15 Page 3 of 39 1 DOCUMENTATION 1.1 TEST REGULATION FCC Rules and Regulations Part 15 Subpart A and C Intentional Radiators Test procedure : AC power line conducted emission, radiated emission, frequency stability and occupied bandwidth tests were performed according to the procedures in ANSI C63.4-2003. 1.2 GENERAL INFORMATION 1.2.1 Test facility : 1) Test Facility located at EMC Engineering Dept. Testing Div. : - No.2 and 3 Anechoic Chambers( 3 meters Site ). - Shielded Enclosure. Expiration date of FCC test facility filing : June 30, 2006 2) EMC Engineering Dept. Testing Div. is recognized under the National Voluntary Laboratory accreditation Program for satisfactory compliance established in title 15, Part 285 Code of Federal Regulations. NVLAP Lab Code : 200189-0 (Effective through : June 30, 2006) 1.2.2 Description of the Equipment Under Test (EUT) : 1) Type of Equipment : EXPOSURE / LIGHT METER 2) Product Type : Pre-production 3) Category : Security/Remote Control Transmitter 4) EUT Authorization : Certification 5) FCC ID : PFK-758-01 6) Trade Name : SEKONIC 7) Model No. : L-758CINE 8) Operating Frequency Range : 344 MHz – 354 MHz 9) Highest Frequency Used in the EUT : 354 MHz 10) Serial No. : XJM20-000001 11) Date of Manufacture : March 30, 2006 12) Power Rating : DC 3.0V(Lithium Battery) 13) EUT Grounding : None 1.2.3 Definitions for symbols used in this test report : x - indicates that the listed condition, standard or equipment is applicable for this report. - indicates that the listed condition, standard or equipment is not applicable for this report. JQA File No. :400-60004 FCC ID : PFK-758-01 Model No. :L-758CINE Issue Date :May 10, 2006 Standard :CFR 47 FCC Rules Part 15 Page 4 of 39 1.3 TEST CONDITION 1.3.1 The measurement of the AC Power Line Conducted Emission - was performed in the following test site. x - was not applicable. Test location : Safety & EMC Center EMC Engineering Dept. Testing Div. 21-25, Kinuta 1-chome, Setagaya-ku, Tokyo 157-8573, Japan - Shielded Enclosure - Anechoic Chamber No. 2 (portable Type) Used test instruments : Type Number of test instruments (Refer to Appendix) Test Receiver N/A Spectrum Analyzer N/A Cable N/A AMN(for EUT) N/A AMN(for Peripheral) N/A Termination N/A JQA File No. :400-60004 FCC ID : PFK-758-01 Model No. :L-758CINE Issue Date :May 10, 2006 Standard :CFR 47 FCC Rules Part 15 Page 5 of 39 1.3.2 The measurement of the Radiated Emission(9 kHz – 30 MHz) x - was performed in the following test site. - was not applicable. Test location : Safety & EMC Center EMC Engineering Dept. Testing Div. 21-25, Kinuta 1-chome, Setagaya-ku, Tokyo 157-8573, Japan x - Anechoic Chamber No. 2 (3 meters) - Anechoic Chamber No. 3 (3 meters) Validation of Site Attenuation : 1) Last Confirmed Date : N/A 2) Interval : N/A Used test instruments : Type Number of test instruments (Refer to Appendix) Test Receiver 13 Antenna 21 Cable 43 JQA File No. :400-60004 FCC ID : PFK-758-01 Model No. :L-758CINE Issue Date :May 10, 2006 Standard :CFR 47 FCC Rules Part 15 Page 6 of 39 1.3.3 The measurement of the Radiated Emission(30 MHz – 1000 MHz) x - was performed in the following test site. - was not applicable. Test location : Safety & EMC Center EMC Engineering Dept. Testing Div. 21-25, Kinuta 1-chome, Setagaya-ku, Tokyo 157-8573, Japan x - Anechoic Chamber No. 2 (3 meters) - Anechoic Chamber No. 3 (3 meters) Validation of Site Attenuation : 1) Last Confirmed Date :March, 2006 2) Interval :1 year Used test instruments : Type Number of test instruments (Refer to Appendix) Test Receiver 11 Antenna 26, 28 Cable 38 RF Amplifier N/A JQA File No. :400-60004 FCC ID : PFK-758-01 Model No. :L-758CINE Issue Date :May 10, 2006 Standard :CFR 47 FCC Rules Part 15 Page 7 of 39 1.3.4 The measurement of the Radiated Emission(Above 1000 MHz) x - was performed in the following test site. - was not applicable. Test location : Safety & EMC Center EMC Engineering Dept. Testing Div. 21-25, Kinuta 1-chome, Setagaya-ku, Tokyo 157-8573, Japan x - No. 2 site (3 meters) - No. 3 site (3 meters) …

Text truncated - open the document above for the full version.

JQA File No. :400-60004 FCC ID : PFK-758-01 Model No. :L-758CINE Issue Date :May 10, 2006 Standard :CFR 47 FCC Rules Part 15 Page 20 of 39 1.10 TEST ARRANGEMENT (PHOTOGRAPHS) PHOTOGRAPHS OF EUT CONFIGURATION FOR RADIATED EMISSIONS MEASUREMENT Photograph present configuration JQA File No. :400-60004 FCC ID : PFK-758-01 Model No. :L-758CINE Issue Date :May 10, 2006 Standard :CFR 47 FCC Rules Part 15 Page 21 of 39 PHOTOGRAPHS OF EUT CONFIGURATION FOR RADIATED EMISSIONS MEASUREMENT Photograph present configuration