PG4SD230SD230 WLAN Access Modem

Series 6000 SD230 Access Appliance User’s Guide Preliminary September 2003 601004-00X Warning: This product may not be exported outside the United States and Canada without authorization from the U.S. Department of Commerce, Bureau of Export Administration. Any export or re-export by the purchaser, directly or indirectly, in contravention of U.S. Export Administration Regulation is prohibited. This document may not be reproduced, in whole or part, without the written permission of coaXmedia, Inc. The contents of this document are subject to change without notice. coaXmedia, Inc. assumes no liability for damages resulting from the use of this product or for the information contained in this manual. coaXmedia and the coaXmedia logo are trademarks of coaXmedia, Inc. All trademarked products mentioned in this document are trademarks of their respective companies. © Copyright 2001 coaXmedia, Inc. All rights reserved. Printed in U.S.A. Limited Warranty coaXmedia guarantees that every SD-Series Access Appliance will be free from physical defects in material and workmanship under normal use for one (1) year from the date of purchase. If the product is determined to be defective during the warranty period, please call coaXmedia’s or your equipment provider’s Customer Support to obtain a Returned Material Authorization (RMA) number. The RMA number should be clearly marked on the outside of the package, when it is shipped. If returned product is determined to be functioning properly, a nominal processing fee may be charged to cover shipping and handling. This product contains no end-user serviceable parts; authorized technicians should perform all service. IN NO EVENT WILL COAXMEDIA BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF THE USE, INABILITY TO USE, OR PERFORMANCE OF THE COAXMEDIA PRODUCT (S), ITS ACCOMPANYING SOFTWARE, OR DOCUMENTATION, INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS PROFITS OR BUSINESS INTERRUPTION, BASED UPON PRINCIPLES OF CONTRACT, WARRANTY, NEGLIGENCE, STRICT LIABILITY OR OTHER TORT, BREACH OF ANY STATUTORY DUTY, PRINCIPLES OF INDEMNITY OR CONTRIBUTION, EVEN IF COAXMEDIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Furthermore, coaXmedia makes no warranty or representation (expressed, implied, or statutory) with respect to its products, accompanying software, or documentation, or to their use, as well as disclaims against their quality, performance, merchantability, or fitness for any particular purpose. Therein, coaXmedia does not warranty that the products will be error free or will operate without interruption. coaXmedia reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. FCC Compliance The coaXmedia access appliance has been tested and found to comply with the limits for a Class B personal computer and peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this unit does cause harmful interference to radio or television reception, which can be determined by turning the unit off and on, the user is encouraged to try to correct the interference by one of more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or experienced radio/TV technician for help. Warning: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authorization to operate this equipment. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The radiated output power of this device is below the FCC radio frequency exposure limits. However, this device should still be installed and used in such a manner that the potential for human contact during normal operation is minimized. In order to comply with RF exposure limits, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. coaXmedia Series 6000 Table of Contents i Table of Contents Table of Contents........................................................................... i Contact Information ..................................................................... 1 1 Important Rules for Safe Operation ...................................... 2 1.1 Service ................................................................................3 2 Introduction ........................................................................... 4 2.1 Features ..............................................................................4 2.2 What You Have ....................................................................5 2.3 What You Need ....................................................................5 2.3.1 Building Requirements....................................................5 2.3.2 Personal Computer Requirements....................................5 Using this Guide.............................................................................6 3 About the Access Appliance ................................................... 7 3.1 Front Panel ..........................................................................7 3.2 Rear Panel .............................................................…

Text truncated - open the document above for the full version.

Response to TCB Findings 1. Please supply an external picture of the rear view of the product to be able to see the I/O ports. We have attached a close up of the rear view showing the I/O ports. 2. Please also supply close-up pictures of both of the antenna connectors (internal and external) to show reverse SMA connections. We have attached the additional close up pictures of the antenna connectors to show that they are reverse SMA connections. 3. Has compliance to 15.31(e) requirement been demonstrated? The test was revisited and there was not change in output power since the output of the switching power supply does not vary with the AC input at 85% and 115%. 4. Please confirm that the AC line conducted emissions readings listed in Section 11 are Q-peak readings. The conducted emissions measurements are Peak readings. 5. Please confirm that in all the restricted bands above 1GHz analyzer settings of RBW=VBW=1MHz have been used for radiated emissions including bad-edge at 2483.5MHz During all radiated emission testing above 1GHZ our RBW and VBW is set to a minimum of 1MHz. The measurements taken in section 9 were done with a 3MHz RBW and VBW. Using peak a measurement of 57.1dBuV (raw reading) and figuring in the correction factor of –4.1 (antenna, cable and amplifier) we derive at a corrected reading of 53.0dBuV/m, which is a 1dBuV margin. 6. Please provide an MPE calculation at 20cms distance at maximum conducted output power and 2dBi specified antenna gain. The MPE calculation has been added to the report. 7. The user's manual should include RF exposure statements. The RF exposure statement has been added to the manual and we have attached a copy.

SD230 Product Label 4.00 2.00 3425 Corporate Way DULUTH GA 30096 WAP ACCESS APPLIANCE Models: FCC ID: SD230 PG4SD230 This device works ONLY where coaXmedia services are provided MADE IN USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) must accept any interference received, including interference that may cause undesired operation.. coaXmedia ACCESS APPLIANCE: Note: 1.Silver metalized polyester material with non glare finish and pressure sensitive adhesive on back. BRADY THT-55-428 or equivalent. 2.Labels to be supplied in form specified by Purchase Order (Roll, Sheet..etc). 3.Printing to be black permanent color except "X" in coaXmedia which is PMS208. 1:1 Scale 3425 Corporate Way, Suite A, Duluth, GA 30096 408001-001 SD230 Unit Label WAP MAC: Label Information Label Location Note:_SD200 Housing Bottom View _1:1 Scale coaXmedia ACCESS APPLIANCE: 3425 Corporate Way DULUTH GA 30096 WAP ACCESS APPLIANCE Models: FCC ID: SD230 PG4SD230 This device works ONLY where coaXmedia services are provided MADE IN USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) must accept any interference received, including interference that may cause undesired operation.. WAP MAC: S/N XXXXXXXXXXXXXXMAC XXXXXXXXXXXX BarCode Code 39

RF Emissions Test Report To Determine Compliance With: FCC, Part 15.247 Rules and Regulations Model number: SD230 October 9, 2003 Manufacturer: coaXmedia 1220 Oak Industrial Lane Suite B Cumming, GA 30041 EMC Testing Laboratories, Inc. authorizes the above company to reproduce this report provided it is reproduced in its entirety EMC Testing Lab. (770) 475-8819 Test report no. 03-152A Page 2 2 of 2 2 Contents Section General Information ....................................................................... 1 Test Summary.................................................................................. 2 Standard Reference ........................................................................ 3 Test Method ............................................................... 4 Conducted Output Power at Antenna Terminals................................................................... 5 6 dB RF Bandwidth ................................................................. 6 Power Density......................................................................... 7 Out of Band Conducted Emissions..................................... 8 Out of Band Radiated Emissions....................................... 9 Transmitter Radiated Emissions ....................................... 10 AC Line Conducted Emissions......................................... 11 Radiated Emissions from Digital Section.............................. 12 Radiated Emissions from Receiver Section............................ 13 MPE calculations ......................................................... 14 Configuration ........................................................................... 15 EMC Testing Lab. (770) 475-8819 Test report no. 03-152A Page 3 3 of 3 3 Section 1 General Information Manufacturer: coaXmedia 1220 Oak Industrial Lane Suite B Cumming, GA 30041 Manufacturer representative: Mr. Rob Terry Equipment covered by this report: Model no. SD230 Options covered by this report: None Equipment serial no. 00032F0E0E27 Test specifications: To determine compliance with: FCC, Part 15.247, Subpart C Rules and Regulations Test report number: 03-152A Test commenced: May 14, 2003 Test completed: October 2, 2003 Test engineer: Edward Barnes Test Facility: The test facility used to perform these tests is on file with the FCC under registration number 637500 and located at: EMC Testing Laboratories, Inc. 2210 Justin Trail Alpharetta, GA 30004 EMC Testing Lab. (770) 475-8819 Test report no. 03-152A Page 4 4 of 4 4 Section 2 Test report summary sheet 1 of 3 Summary: Tests Results Conducted Output Power at Antenna Terminals Pass 6 dB RF Bandwidth Pass Power Density Pass Out of Band Conducted Emissions Pass Out of Band Radiated Emissions Pass Transmitter Radiated Emissions in Restricted Bands Pass AC Line Conducted Emissions Pass Radiated Emissions from Digital Section Pass Radiated Emissions from Receiver (LO Radiation) Pass 1- The product(s) covered by this report was found to comply with FCC, Part 15.247, Subpart C Rules and Regulations. 2- The test results apply only to the products identified on the test report. 3- Voltage variation measurements of 85% and 115% were not performed since the output of the switching power supply is regulated and does not vary with the 85% and 115% varied input. Product description: The product(s) covered by this report consisted of a model SD230, wireless access point allowing high-speed internet connectivity over existing building coaxial distribution systems. The EUT communicates to a personal computer via an internal 802.11b wireless access point. The enclosure is constructed of plastic with overall dimensions measuring 18.2cm wide by 4cm high by 20.3cm deep and houses the following components judged as critical: 1. A printed wiring board, manufactured by coaXmedia, part no. 311004-001 Rev. B EMC Testing Lab. (770) 475-8819 Test report no. 03-152A Page 5 5 of 5 5 Test report summary sheet 2 of 3 2. An 802.11B wireless access point, (with plastic enclosure removed and one antenna connector repositioned) manufactured by Trendnet, model TEW-310APBX, FCC ID: O7J-GL2422AP. 3. A reverse SMA external 2 dBi antenna 4. A reverse SMA internal 2 dBi antenna. Test configuration: The equipment under test (EUT) was set-up and configured as specified by the manufacturer as follows. The unit has an external and internal antenna. In normal operation the unit uses only the antenna with the highest signal strength. For the purposes of these tests the unit was made to use first the external antenna and then the internal antenna. 1- The EUT was connected to the following support peripherals: NOTE: Except for item D below, the following peripheral equipment was positioned away from the EUT: A) A Broadband Gateway, manufactured by coaXmedia, model no. BG-200, serial no. 10308000503101 B) A Dell Dimension XPS T6000R Desktop computer C) A mouse, manufactured by Microsoft D) A 120 VAC/5VDC Power Supply, manufactured by Fairway Electronic Co., Model WN10A-050, serial no. 3882B430. 2- The EUT utilized the following cables and were connected as indicated below: A) A shielded cable, (integral to the mouse) was connected to the computer’s mouse port. B) A 75 ohm coaxial cable with a 40 dB attenuator was connected from the EUT’s RF port to the IN port of a typical 2-way splitter, manufactured by Signal Vision Inc., part no. SV-2G. The OUT ports of the splitter were connected to the Broadway Gateway’s RFI and RFO ports by two 75 ohm coaxial cables. C) An unshielded category 5 cable was connected from the desktop computer’s Ethernet port to the Broadband Gateway Ethernet port. EMC Testing Lab. (770) 475-8819 Test report no. 03-152A Page 6 6 of 6 6 Test report summary sheet 3 of 3 Test operation: For all measurements, the equipment under test was caused to function in a continuous mode of operation for maximum electrical activity as specified by the manufacturer. Specifically, during test configuration 1, the EUT was made to continu…

Text truncated - open the document above for the full version.