PH3-DR638VHF/UHF Mobile Transveicer

A1.140220 ALINCO, INC. Y odoyabashi Dai-bldg 13F 4-4-9 Koraibashi, Chuo-ku, Osaka 541-0043 Japan Phone: +81-6-7636-2362 Fax: +81-6-6208-3802 http://www .alinco.com E-mail:[email protected] Copyright Alinco, lnc. PS0665A/FNEG-NI Printed in China VHF/UHF FM Transceiver DR638 All EU and EFTA member states. Operator license is required. FCC ID:PH3-DR638 IC:3070C-DR638 DR-638 Instruction Manual VHF/UHF FM T ransceiver Thank you for purchasing your new Alinco transceiver. Please read this manual carefully before using the product to ensure full performance, and keep this manual for future reference as it contains information on after-sales services. In case addendum or errata sheets are included with this product, please read those materials and keep them together with this instruction manual for future reference. NOTE: DR-638 may be delivered to you after dealer-programming. In such cases, please ask your dealer about the available features in your unit and how to operate this unit. Introduction Thank you very much for purchasing this excellent Alinco transceiver. Our products are ranked among the finest in the world. This radio has been manufactured with state of the art technology and it has been tested carefully at our factory. It is designed to operate to your satisfaction for many years under normal use. Please read this manual completely from the first page to the last, to learn all the functions the product offers. It is important to note that some of the operations may be explained in relation to information in previous chapters. By reading just one part of the manual, you may risk not understanding the complete explanation of the function. Before transmitting There are many radio stations operating in proximity to the frequency ranges this product covers. Be careful not to cause interference when transmitting around such radio stations. ■ Lightning Please note that no car provides adequate protection of its passengers or drivers against lightning. Therefore, Alinco will not take responsibility for any danger associated with using its radios or inside the car during lightning. ■ For North American users Due to strict rules, this product is blocked for operations before sales and only dealers can program the radio before delivery to consumers. Manufacturer is not aware of details of such dealer-programming therefore please kindly contact your dealer first in case technical-service may be necessary. Conformity Symbols T ested to comply MIL-STD-810G -Shock: Method 514.6/I,IV -Vibration: Method 516.6/I In case the unit you have purchased is marked with a CE symbol,a copy of relative conformity certificate or docu-ment can be reviewed at http:// www.alinco.com/usa.html.Please see the back-cover for more details. Copyright 2012 All rights reserved. NO part of this document may be reproduced, copied, translated or transcribed in any form or by any means without the prior writhout the prior written permission of Alinco. Inc,Osaka, Japan, English Edition Printed in China. Conformity Information Comformity information / Amateur radio version Manufacturer: ALINCO, Inc. Electronics Division Yodoyabashi Dai-bldg. 13F 4-4-9 Koraibashi, Chuo-ku, Osaka 541-0043 Japan FCC NOTICE / Compliance Information Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Tested to Comply With FCC Standards FOR HOME OR OFFICE USE Information in this document is subject to change without notice or obligation. All brand names and trademarks are the property of their respective owners. Alinco cannot be liable for pictorial or typographical inaccuracies. Some parts, options and/or accessories are unavailable in certain areas. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. customers in Canada : MODEL: 3070C-DR638 Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et. (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. CE Conformity Information This device is in compliance with the essential requirements of R&TTE Directive 1999/5/EC. A copy of the certificate by the notified body can be reviewed at http:// www.alinco.com/usa.html. This device is authorized for use in all EU and EFTA member states. An operator's license is required for this device. Trash bin icon / Rohs Icon IMPORTANT: This manual is common to amateur and commercial users. Not all features are avail…

Text truncated - open the document above for the full version.

Feb.20, 2014 Federal Communication Commission Authorization and Evaluation Division FCC ID: PH3-DR638 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List 5.Tune Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Alinco, Incorporated, Electronics Division Contact person: Kazuhiro Kusuhara Title: General manager

External Photos TOTAL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID/IC Label Location VHF/UHF FM MOBILE TRANSCEIVER Model: DR-638 Brand Name: ALINCO FCC ID: PH3-DR638 IC:3070C-DR638

Internal Photos OPEN VIEW-1 OF EUT OPEN VIEW-2 OF EUT INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT INTERNAL VIEW-6 OF EUT INTERNAL VIEW-7 OF EUT INTERNAL VIEW-8 OF EUT INTERNAL VIEW-9 OF EUT INTERNAL VIEW-10 OF EUT

Report No.: AGC00589140205F7 Page 1 of 9 OET Bulletin 65 (MPE) Test Report Report No.: AGC00589140205F7 FCC ID : PH3‐DR638 IC 3070C‐DR638 PRODUCT DESIGNATION : VHF/UHF FM MOBILE TRANSCEIVER BRAND NAME : ALINCO TEST MODEL : DR‐638 CLIENT : Alinco, Inc. Electronics Division DATE OF ISSUE : Feb.18, 2014 STANDARD(S) : OET Bulletin 65 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC00589140205F7 Page 2 of 9 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Feb.18, 2014Valid Original Report Report No.: AGC00589140205F7 Page 3 of 9 TABALE OF CONTENTS TABALE OF CONTENTS .................................................................................................................................. 2 1. TEST RESULT CERTIFICATION ................................................................................................................... 4 2. TECHNICAL INFORMATION ......................................................................................................................... 5 3. RF EXPOSURE MEASUREMENT ................................................................................................................. 6 3.1 INTRODUCTION ...................................................................................................................................... 6 3.2 FCC LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) .......................................................... 7 4. CLASSIFICATION OF THE ASSESSMENT METHODS ............................................................................... 8 5. EUT OPERATION CONDITION ..................................................................................................................... 8 6. TEST RESULTS ............................................................................................................................................. 9 Report No.: AGC00589140205F7 Page 4 of 9 1. TEST RESULT CERTIFICATION Applicant Name: Alinco, Inc. Electronics Division Address: Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Manufacturer Name: Alinco, Inc. Electronics Division Address: Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Product Designation VHF/UHF FM MOBILE TRANSCEIVER Brand Name ALINCO Test Model DR-638 Hardware Version: V1.0 Software Version: V1.0 Test Standard OET Bulletin 65 Date of Test: Feb.13, 2014 to Feb.17, 2014 We (AGC), Attestation of Global Compliance (Shenzhen) Co., Ltd. for compliance with the requirements set forth in the FCC Standard OET Bulletin 65 (Edition 97-01) Supplement C (Edition 01-01). The results of testing in this report apply to the product/system which was tested only. Tested by Wall Huang Feb.18, 2014 Checked By Forrest Lei Feb.18, 2014 Authorized By Solger Zhang Feb.18, 2014 Report No.: AGC00589140205F7 Page 5 of 9 2. TECHNICAL INFORMATION Note: the following data is based on the information by the applicant. EUT DESCRIPTION The EUT is a VHF/UHF FM MOBILE TRANSCEIVER designed for voice communication. It is designed by way of utilizing the FM modulation achieves the system operating. A major technical description of EUT is described as following: Communication Type Voice / Tone only Modulation FM Emission Type F3E Emission Bandwidth VHF: 10.49KHz UHF: 10.39KHz Peak Frequency Deviation 1.87KHz Audio Frequency Response 6.24dB Maximum Transmitter Power VHF: 46.98dBm UHF: 45.99dBm Output power Modification VHF: 50W UHF: 40W (It was fixed by the manufacturer, any individual can’t arbitrarily change it.) Antenna Designation Detachable Power Supply DC 13.8V Limiting Voltage DC 11.73V Operation Frequency Range and Channel Frequency Range: 136MHz to 174MHz Channel Separation: 12.5KHz (VHF) Frequency Range: 400MHz to 480MHz Channel Separation: 12.5KHz (UHF) Top Channel: 136.025MHz Centre Channel: 155.000MHz Bottom Channel: 173.975MHz Top Channel: 400.025MHz Centre Channel: 440.000MHz Bottom Channel: 479.975MHz Frequency Tolerance VHF: 0.914ppm UHF: 0.860ppm Report No.: AGC00589140205F7 Page 6 of 9 3. RF EXPOSURE MEASUREMENT 3.1 INTRODUCTION Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. The 1992 ANSI/IEEE standard (See Listed limit table) specifies a minimum separation distance of 20 cm for performing reliable field measurements to determine adherence to MPE limits. If the minimum separation distance between a transmitter and nearby persons is more than 20 cm under normal operating conditions, compliance with MPE limits may be determined at such distance from the transmitter. When applicable, operation instructions and prominent warning labels may be used to alert the exposed persons to maintain a specified distance from the transmitter or to limit their exposure durations and usage conditions to ensure compliance. Report No.: AGC00589140205F7 Page 7 of 9 3.2 FCC LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transm…

Text truncated - open the document above for the full version.

Report No.: AGC00589140205F2 Page 1 of 54 FCC Part 90 Test Report Report No.: AGC00589140205F2 FCC ID : PH3‐DR638 IC 3070C‐DR638 PRODUCT DESIGNATION : VHF/UHF FM MOBILE TRANSCEIVER BRAND NAME : ALINCO MODEL NAME : DR‐638 CLIENT : Alinco, Inc. Electronics Division DATE OF ISSUE : Feb.18, 2014 STANDARD(S) : FCC Part 90 Rules RSS‐119 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC00589140205F2 Page 2 of 64 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Feb.18, 2014Valid Original Report Report No.: AGC00589140205F2 Page 3 of 64 VERIFICATION OF COMPLIANCE Applicant: Alinco, Inc. Electronics Division Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Manufacturer: Alinco, Inc. Electronics Division Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Product Designation: VHF/UHF FM MOBILE TRANSCEIVER Brand Name: ALINCO Model Name: DR-638 Hardware Version: V1.0 Software Version: V1.0 Report No.: AGC00589140205F2 Date of Test: Feb.13, 2014 to Feb.17, 2014 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C 63.4:2009. The sample tested as described in this report is in compliance with the FCC Rules Part 90 requirements The test results of this report relate only to the tested sample identified in this report. Tested by Wall Huang Feb.18, 2014 Checked By Kidd Yang Feb.18, 2014 Authorized By Solger Zhang Feb.18, 2014 Report No.: AGC00589140205F2 Page 4 of 64 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................. 6 1.1 PRODUCT DESCRIPTION ............................................................................................................. 6 1.3 TEST METHODOLOGY ................................................................................................................. 7 1.4 TEST FACILITY .............................................................................................................................. 7 1.5 SPECIAL ACCESSORIES .............................................................................................................. 7 1.6 EQUIPMENT MODIFICATIONS ..................................................................................................... 7 2. SYSTEM TEST CONFIGURATION ..................................................................................................... 8 2.1 EUT CONFIGURATION .................................................................................................................. 8 2.2 EUT EXERCISE ............................................................................................................................. 8 2.3 GENERAL TECHNICAL REQUIREMENTS .................................................................................... 8 2.4 CONFIGURATION OF TESTED SYSTEM .................................................................................... 9 3. SUMMARY OF TEST RESULTS ....................................................................................................... 10 4. DESCRIPTION OF TEST MODES ..................................................................................................... 11 5. CONDUCTED LIMITS ........................................................................................................................ 12 5.1 PROVISIONS APPLICABLE ......................................................................................................... 12 5.2 MEASUREMENT PROCEDURE .................................................................................................. 12 5.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 13 5.4 TEST EQUIPMENT USED ............................................................................................................ 13 5.5 TEST RESULT .............................................................................................................................. 14 6. FREQUENCY TOLERANCE .............................................................................................................. 15 6.1 PROVISIONS APPLICABLE ......................................................................................................... 15 6.2 MEASUREMENT PROCEDURE .................................................................................................. 15 6.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 16 6.4 TEST EQUIPMENT USED: ........................................................................................................... 16 6.5 TEST RESULT .............................................................................................................................. 16 7. EMISSION BANDWIDTH ................................................................................................................... 22 7.1 PROVISIONS APPLICABLE ......................................................................................................... 23 7.2 MEASUREMENT PROCEDURE .................................................................................................. 23 7.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 23 7.4 MEASUREMENT EQUIPMENT USED: ........................................................................................ 23 7.5 MEASUREMENT RESULT: ............................................…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP RADIATED TEST SETUP