PH3DR-CS25VHF FM TRANSCEIVER

A1.221102 ALINCO, INC. Y odoyabashi Dai-bldg 13F 4-4-9 Koraibashi, Chuo-ku, Osaka 541-0043 Japan Phone: +81-6-7636-2362 Fax: +81-6-6208-3802 http://www.alinco.com E-mail:[email protected] Copyright Alinco, lnc. PS1075/FNFF-EN Printed in China Manufacture: Electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items. Contact your local authority for details of disposal rules. DR-CS25 Instruction Manual VHF FM Mobile Transceiver Thank you for purchasing your new Alinco transceiver. Please read this manual carefully before using the product to ensure full performance, and keep this manual for future reference as it contains information on after-sales services. In case addendum or errata sheets are included with this product, please read those materials and keep them together with this instruction manual for future reference. Introduction Thank you very much for purchasing this excellent Alinco transceiver. Our products are ranked among the finest in the world. This radio has been manufactured with state of the art technology and it has been tested carefully at our factory. It is designed to operate to your satisfaction for many years under normal use. Please read this manual completely from the first page to the last, to learn all the functions the product offers. It is important to note that some of the operations may be explained in relation to information in previous chapters. By reading just one part of the manual, you may risk not understanding the complete explanation of the function. Before transmitting There are many radio stations operating in proximity to the frequency ranges this product covers. Be careful not to cause interference when transmitting around such radio stations. ■ Covering ranges It may vary drastically depending on the type and location of antenna system. Please consult your dealer for details as DR-CS25 requires an external antenna. ■ Lightning Any person is not safe outdoors during thunderstorms and lightning. Note also that no car provides adequate protection of its passengers or drivers against lightning as well. Therefore, Alinco will not take responsibility for any danger associated with using radios outdoors or inside the car during lightning. ■ Electromagnetic Interference/Compatibility During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid ■ About Utility Software The utility software may be available and programming cable is optional. such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. ■ Enclosure protection This transceiver is NOT water and dust protected. Avoid contacts with water and dust, and if wet or dirty, immediately wipe them out with clean dry cloth. This product is NOT anti-explosive. Never use in close vicinity to explosive gas, combustible dust,on an oil rig or in an open mine. ■Ultra compact, Output power selectable 50W/20W/10W ■PC-programmable 200ch ■Alphanumeric name tags ■Wide variety of selective calling features built-in; The 2-Tone, 5-Tone, 51 CTCSS, 1024 DCS, 4 Tone-burst tones and DTMF/ANI decode ■Radio stun/kill/revive functions ■Bright LCD and easy-to-operate backlit ■Multi-function, backlit microphone enables direct frequency entry & more from keypads ■Various scan modes, Key lock, Wide/Narrow operations Features Conformity Symbols FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer for technical assistance. Comformity information Manufacturer: ALINCO, Inc. Electronics Division Yodoyabashi Dai-bldg. 13F 4-4-9 Koraibashi, Chuo-ku, Osaka 541-0043 Japan Check with your local waste officials for details on recycling or proper disposal in your area. Compliance Information Statement Copyright 2012 All rights reserved. NO part of this document may be reproduced, copied, translated or transcribed in any form or by any means without the prior writhout the prior written permission of Alinco. Inc, Osaka, Japan, English Edition Printed in China. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. An amateur radio operator license is required to operate this device. WARNING:MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW…

Text truncated - open the document above for the full version.

Alinco Incorporated, Electronics Division Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Date: 2022-12-12 Declaration Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §15.121 FCC ID: PH3DR-CS25 Dear Sir/Madam, We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver inoperable. This scanning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. Sincerely Yours, Signature: ___________________________ Contact person: Kazuhiro Kusuhara

Alinco Incorporated, Electronics Division Agent Authorization Company: Alinco Incorporated, Electronics Division Address: Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Product Name: VHF FM TRANSCEIVER Model Number(s): DR-CS25 Product Description: VHF FM TRANSCEIVER We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-12-13 Name: Kazuhiro Kusuhara Company: Alinco Incorporated, Electronics Division

Report No.: AGC01284221101AP02 Page 1 of 7 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC01284221101AP02 Page 2 of 7 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Antenna Port Report No.: AGC01284221101AP02 Page 3 of 7 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC01284221101AP02 Page 4 of 7 RIGHT VIEW OF EUT HAND MICROPHONE TOP VIEW OF EUT Report No.: AGC01284221101AP02 Page 5 of 7 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC01284221101AP02 Page 6 of 7 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC01284221101AP02 Page 7 of 7 RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 30mm&15mm FCC ID: PH3DR-CS25

Report No.: AGC01284221101AP02 Page 1 of 10 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC01284221101AP02 Page 2 of 10 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC01284221101AP02 Page 3 of 10 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC01284221101AP02 Page 4 of 10 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC01284221101AP02 Page 5 of 10 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC01284221101AP02 Page 6 of 10 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) Report No.: AGC01284221101AP02 Page 7 of 10 INTERNAL VIEW OF EUT (FIGURE 10) INTERNAL VIEW OF EUT (FIGURE 11) Report No.: AGC01284221101AP02 Page 8 of 10 HAND MICROPHONE OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC01284221101AP02 Page 9 of 10 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC01284221101AP02 Page 10 of 10 INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report****************************************

Page 1 of 23 FCC Test Report Report No.: AGC01284221101FE08 FCC ID : PH3DR-CS25 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : VHF FM TRANSCEIVER BRAND NAME : ALINCO MODEL NAME : DR-CS25 APPLICANT : Alinco Incorporated, Electronics Division DATE OF ISSUE : Nov. 28, 2022 STANDARD(S) : FCC Part 15 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01284221101FE08 Page 2 of 23 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov. 28, 2022 Valid Initial Release Report No.: AGC01284221101FE08 Page 3 of 23 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE ................................................................................................................. 4 2. PRODUCT INFORMATION .............................................................................................................................. 5 3. IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION ............................................................... 6 4. SUPPORT EQUIPMENT LIST ......................................................................................................................... 7 5. SYSTEM DESCRIPTION .................................................................................................................................. 7 6. MEASUREMENT UNCERTAINTY ................................................................................................................... 8 7. SUMMARY OF TEST RESULTS ..................................................................................................................... 8 8. FCC RADIATED EMISSION TEST .................................................................................................................. 9 8.1 PROVISIONS APPLICABLE ................................................................................................................... 9 8.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................... 9 8.3 TEST PROCEDURE .............................................................................................................................. 11 8.4 TEST RESULT ....................................................................................................................................... 12 9. FCC CONDUCTED EMISSION TEST ............................................................................................................ 16 9.1 PROVISIONS APPLICABLE ................................................................................................................. 16 9.2 TEST SETUP BLOCK DIAGRAM ......................................................................................................... 16 9.4 TEST RESULT ................................................................................................................................... 17 10. ANTENNA CONDUCTED POWER FOR RECEIVERS ............................................................................... 18 10.1 PROVISIONS APPLICABLE ............................................................................................................... 18 10.2 TEST SETUP BLOCK DIAGRAM ....................................................................................................... 18 10.3 TEST PROCEDURE ............................................................................................................................ 18 10.4 TEST RESULT ..................................................................................................................................... 19 11. SCANNING RECEIVERS AND FREQUENCY CONVERTERS USED WITH SCANNING RECEIVERS .. 21 11.1 PROVISIONS APPLICABLE ............................................................................................................... 21 11.2 TEST SETUP BLOCK DIAGRAM ....................................................................................................... 21 11.3 TEST PROCEDURE ............................................................................................................................ 21 11.4 TEST RESULT ..................................................................................................................................... 22 APPENDIX I PHOTOGRAPHS OF TEST SETUP ............................................................................................. 23 APPENDIX II: PHOTOGRAPHS OF TEST EUT................................................................................................ 23 Report No.: AGC01284221101FE08 Page 4 of 23 1. VERIFICATION OF COMPLIANCE Applicant: Alinco Incorporated, Electronics Division Address: Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Manufacturer: Alinco Incorporated, Electronics Division Address: Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Factory: Alinco Incorporated, Electronics Division Address: Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Product Designation: VHF FM TRANSCEIVER Brand Name: ALINCO Test Model: DR-CS25 Measurement Procedure: ANSI C63.4: 2014 Deviation: No any deviation from the test method. Date of receipt of test item Nov. 08, 2022 Date of Test: Nov. 08, 2022~Nov. 28, 2022 Condition of Test Sample: Normal Test Result: Pass Report Template； AGCRT-US-PTT/EMC The above equipment was tested by Attestation Of Global Compliance (Shenzhen) Co., Ltd. for compliance with the requirements set forth in the FCC Rules and Regulations Part 15, the measurement procedure according to ANSI C63.4:2014. This said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment are within the compliance requirements. The test results of this report relate only to the tested sample identified in this report. Prepared By Bibo Zhang (Project Engineer) Nov. 28, 2022 Reviewed By Calvin Liu (Reviewer) Nov. 28…

Text truncated - open the document above for the full version.

Report No.: AGC01284221101AP01 Page 1 of 1 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz ****************************************End of Report*************************************