PH3DJ-A11VHF FM Handheld Transceiver

Thank you for purchasing your new Alinco transceiver. Please read this manual carefully before using the product to ensure full performance, and keep this manual for future reference as it contains information on after-sales service. In case addendum or errata sheets are included with this product, please read those materials and keep them together with this instruction manual for future reference. Instruction Manual VHF FM HANDHELD TRAMSCEIVER FCC ID:PH3DJ-A11 ■ 128 PC-programmable channels (16ch x 8groups) ■ Li-Ion battery pack and stand-charger as standard accessories ■ Voice Compander (Reduce Noise & enhance audio clarity) ■ Inversion Scramble(Analog encryption) ■ Sub-tone (CTCSS/DCS) Encode/Decode and DTMF ■ VOX built-in Features Conformity Symbols Tested to comply MIL-STD-810G -Shock: Method 514.6/I,IV -Vibration: Method 516.6/I ■ Output power 5W SAFETY TRAINING INFORMATION Warning: Please Read Carefully • DO NOT operate the transceiver without a proper antenna attached, as it may damage the transceiver and may also cause you to exceed FCC RF exposure limits. A proper antenna is the genuine antenna supplied with this transceiver by Alinco or ones specifically authorized by the antenna manufacturer for use with this transceiver. • the original belt clips when attaching the transceiver to your body (Unauthorized attachment devices may • Use only the genuine Alinco accessories listed in this instruction manual for RF safety. Third party accessories are not guaranteed for RF safety by Alinco. • Electromagnetic Interference/Compatibility During transmissions, a transceiver generates RF energy that can possibly cause interference with other devices and/or systems. To avoid such interference, turn off the transceiver in areas where signs are posted to do so. NEVER operate transceivers in areas that are sensitive to electromagnetic radiation such as hospitals, blasting sites, aboard aircraft and similar advanced vehicles etc. Do not expose magnetic cards such as credit cards in a very close vicinity to a transceiver; it may erase the magnetic data. A person using medical devices such as a pacemaker MUST NOT use this transceiver, as interference may cause malfunction to such medical devices. ALWAYS keep the device at least 2.5 cm away from your body when transmitting and only use help radiating more electromagnetic energy). • Occupational/Controlled Use This product is used in situations that users are exposed to RF as consequence of their employment provided those users are fully aware of the potential RF hazards and can exercise control over their exposure. • This transceiver is NOT ATEX approved and NOT intended for the use in hazardous explosive atmospheres. Alert Environment and condition of use Use of this product may be prohibited or illegal outside of your country. Be informed in advance when you travel. It is recommended that you check local traffic regulations regarding the use of a radio equipment while driving. Some countries prohibit or apply restrictions for the operation of radios and mobile- phones while driving. Do not use this product in close proximity to other electronic devices, especially medical ones. It may cause interference to those devices. Keep the radio out of the reach of children. In case a liquid leaks from the product, do not touch it. It may damage your skin. Rinse with plenty of cold water if the liquid contacted your skin. Never operate this product in facilities where radio products are prohibited for use such as aboard aircraft, in airports, in ports, within or near the operating area of business wireless stations or their relay stations. The manufacturer declines any responsibilities against loss of life and/or a property due to a failure of this product when used to perform important tasks like life-guarding, surveillance, and rescue. Do not use multiple radios in very close proximity. It may cause interference and/or damage to the product(s). Risk of explosion if battery is replaced with an incorrect type. Dispose of, or recycle used batteries according to your local regulations. Handling this product The manufacturer declines any responsibilities against loss of life and property due to a failure of this product when used with or as a part of a device made by third parties. Use of third party accessory may result in damage to this product. It will void our warranty for repair. Be sure to reduce the audio output level to minimum before using an earphone or a headset. Excessive audio may damage hearing. Do not open the unit without permission or instruction from the manufacturer. Unauthorized modification or repair may result in electric shock, fire and/or malfunction and voids warranty. Do not operate this product in a wet place such as in a shower room. It may result in electric shock, fire and/ or malfunction, This product is splash-proof but not a complete water-proof. Do not place the product in a container carrying conductive materials, such as water or metal in close proximity. A short-circuit to the product may result in electric shock, fire and/or malfunction. About chargers Do not use adapters other than having the specified voltage. It may result in electric shock, fire and/or malfunction,Never turn on the radio while charging. Do not plug multiple devices using an adapter into a single wall outlet. It may result in overheating and/or fire. Do not handle adapter with a wet hand. It may result in electric shock. Securely plug the adapter into the wall outlet. Insecure installation may result in short-circuit, electronic shock and/or fire. Do not use the adapter if the plug or socket contacts are dirty. Overheating and/or short-circuiting may result in fire, electric shock and/or damage to the product. In case of emergency In case of the following situation(s), please turn off the product, switch off the source of power, then remove or unplug the power-cord. Please contact your local dealer of this product for service and assistance. Do not u…

Text truncated - open the document above for the full version.

Alinco Incorporated, Electronics Division Yodoyabashi-Dai Bldg 13F,4-4-9, Koraibashi, Chuo-ku Osaka 541-0043 Japan Tel: 06-7636-2360 Fax: 06-6208-3801 Jul.08.2014 To: Federal Communication Commission Authorization and Evaluation Division Subject: Attestation statement regarding the Land Mobile Radio frequency TYPE OF QEUIPMENT: Licensed Non-Broadcast Transmitter Held to Face FCC ID: PH3DJ-A11 Dear Sir or Madam I attest that the product could program the frequence on computer through interface by manufacturer, is incapable of tuning, or readily being altered, by the end-user. Please contact the undersigned if you have any questions or need any further information. Regards Alinco Incorporated, Electronics Division Signature: Name, Job Title and Dept.: Kazuhiro Kusuhara / General Manager

Jul.08, 2014 Federal Communication Commission Authorization and Evaluation Division FCC ID: PH3DJ-A11 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List 5.Tune Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Alinco, Incorporated, Electronics Division Contact person: Kazuhiro Kusuhara Title: General manager

Alinco Incorporated, Electronics Division Yodoyabashi-Dai Bldg 13F,4-4-9, Koraibashi, Chuo-ku Osaka 541-0043 Japan Tel: 06-7636-2360 Fax: 06-6208-3801 Jul.08.2014 To: Federal Communication Commission Authorization and Evaluation Division Subject: Attestation statement regarding the Land Mobile Radio TYPE OF QEUIPMENT: Licensed Non-Broadcast Transmitter Held to Face FCC ID: PH3DJ-A11 Dear Sir or Madam I attest that the product has one antenna, one battery capacity and one body- worn and audio accessories. Please contact the undersigned if you have any questions or need any further information. Regards Alinco Incorporated, Electronics Division Signature: Name, Job Title and Dept.: Kazuhiro Kusuhara / General Manager

Jul.08, 2014 Federal Communication Commission Authorization and Evaluation Division Subject: FCC ID: PH3DJ‐A11 Justification Letter for Expanded Frequency Range 136‐174MHz Gentlemen; You have asked Alinco Incorporated, Electronics Division for justification to have the freq range 136‐174MHz appears on the face of the FCC Grant of Certification for a FCC Part 90 Certification. This frequency range is regarded as usual & customary by United States Federal Government and its various departments, user organizations and the military to appear on the face of the equipment Grant of Certification. Sincerely, Alinco Incorporated, Electronics Division Kazuhiro Kusuhara /Manager

External Photos TOTAL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID/IC Label Location FCC RF Warning Label This radio complies with IEEE and RSS‐102 exposure limits for occupational/controlled RF exposure emvironment at operating duty factors of up to 50% and is authorized by the IC for occupational use only. VHF FM HANDHELD TRANSCEIVER Model: DJ-A11 Brand Name: ALINCO FCC ID: PH3DJ-A11 IC:3070C-DJA11

Internal Photos OPEN VIEW-1 OF EUT OPEN VIEW-2 OF EUT INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT

FCC ID APPLIC Produc Brand Model Client Date of STAND REPOR A CAUTIO This rep laborato CATION PUR ct Designati Name Name f Issue DARD(S) RT VERSION Attestat ON: port shall n ory and sha SA Rep : RPOSE : ion : : : : : : : tion of G ot be repro all not be q R Te port No.: A PH3DJ‐A 1 Original E VHF FM H N/A DJ‐A11 Alinco In c Aug.30,2 0 IEEE Std. 47CFR § 2 IEEE/ANS V1.0 Global C oduced exc uoted out o est AGC0058 11 Equipment HANDHELD T corporated, E 014 1528:2003 2.1093 SI C95.1 Complia cept in full w of context. Rep 89140505 TRANSCEIVE Electronics D ance(Sh without the Report port 5FH01 ER Division henzhen e written p t No.:AGC00 t n) Co., L ermission 0589140505 Page 1 Ltd. of the test FH01 of 66 Report No.:AGC00589140505FH01 Page 2 of 66 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug.30,2014 Valid Original Report App App Man Man Prod Bran Mod Diffe EUT App Te st Perf Rep plicant Name plicant Addre nufacturer N nufacturer A duct Name nd Name del Name erence Desc T Voltage plicable Stan t Date formed Loca port Templat e ess Name Address cription ndard ation te Tes Alinco Yodoy Alinco Q Yod VHF F N/A DJ-A1 N/A DC7.4 IEEE 47CF IEEE / Aug.2 Attest 2F, Bu Street AGCR Teste Check e Authoriz st Rep o Incorporate yabashi Dai- o Incorporate doyabashi D FM HANDHE 11 4V by batter Std. 1528:2 R § 2.1093 /ANSI C95.1 29,2014 tation of Glo uilding 2, No t, Bao'an Dis RT-EC-PPT/ d By ed By zed By port C ed, Electron -Bldg 13F, 4 ed, Electron Dai-Bldg 13F ELD TRANS ry 003 1 obal Complia o.1-No.4, Ch strict, Shenz /SAR (2013- Eric Zh Angela Solger Z Certific nics Division 4-4-9 Koraiba nics Division F, 4-4-9 Kora SCEIVER ance (Shenz haxi Sanwei zhen, China -03-01) hou a Li hang Report cation ashi, Chuo-K aibashi, Chu zhen)Co., Ltd i Technical I Aug.30,201 Aug.30,201 Aug.30,201 t No.:AGC00 n Ku, Osaka 5 o-Ku, Osaka d. ndustrial Pa 4 4 4 0589140505 Page 3 541-0043, Ja a 541-0043, ark, Gushu, FH01 of 66 apan , Japan Xixiang Report No.:AGC00589140505FH01 Page 4 of 66 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. EUT Description .................................................................................................................................... 6 2.2. Test Procedure ...................................................................................................................................... 7 2.3. Test Environment ................................................................................................................................... 7 3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 8 3.1. Specific Absorption Rate (SAR) ............................................................................................................. 8 3.2. SAR Measurement Procedure ............................................................................................................... 9 3.3. DASY SAR System Description ........................................................................................................... 10 3.4. DASY5 E-Field Probe .......................................................................................................................... 12 3.5. Isotropic E-Field Probe Specification .................................................................................................... 12 3.6. Robot .................................................................................................................................................. 12 3.7. Light Beam Unit ................................................................................................................................... 13 3.8. Device Holder...................................................................................................................................... 13 3.9. Measurement Server ........................................................................................................................... 13 3.10. ELI4 Phantom ................................................................................................................................... 14 4. TISSUE SIMULATING LIQUID ..................................................................................................................... 15 4.1. The composition of the tissue simulating liquid ..................................................................................... 15 4.2. Tissue Calibration Result ..................................................................................................................... 16 4.3. Tissue Dielectric Parameters for Head and Body Phantoms ................................................................. 17 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 18 5.1. SAR System Validation Procedures ..................................................................................................... 18 5.2. SAR System Validation ........................................................................................................................ 19 6. EUT TEST POSITION ................................................................................................................................... 21 6.1. Body Worn Position ............................................................................................................................. 21 7. SAR EXPOSURE LIMITS ............................................................................................................................ 22 8. TEST EQUIPMENT LIST ......................................................…

Text truncated - open the document above for the full version.

Report No.:AGC00589140505FH01 Page 44 of 66 APPENDIX D. PROBE CALIBRATION DATA Report No.:AGC00589140505FH01 Page 45 of 66 Report No.:AGC00589140505FH01 Page 46 of 66 Report No.:AGC00589140505FH01 Page 47 of 66 Report No.:AGC00589140505FH01 Page 48 of 66 Report No.:AGC00589140505FH01 Page 49 of 66 Report No.:AGC00589140505FH01 Page 50 of 66 Report No.:AGC00589140505FH01 Page 51 of 66 Report No.:AGC00589140505FH01 Page 52 of 66 Report No.:AGC00589140505FH01 Page 53 of 66 APPENDIX E. DAE CALIBRATION DATA Report No.:AGC00589140505FH01 Page 54 of 66 Report No.:AGC00589140505FH01 Page 55 of 66 Report No.:AGC00589140505FH01 Page 56 of 66 Report No.:AGC00589140505FH01 Page 57 of 66 Report No.:AGC00589140505FH01 Page 58 of 66 APPENDIX F LOOP ANTENNA CALIBRATION DATA Report No.:AGC00589140505FH01 Page 59 of 66 Report No.:AGC00589140505FH01 Page 60 of 66 Report No.:AGC00589140505FH01 Page 61 of 66 Report No.:AGC00589140505FH01 Page 62 of 66 Report No.:AGC00589140505FH01 Page 63 of 66 Report No.:AGC00589140505FH01 Page 64 of 66 Report No.:AGC00589140505FH01 Page 65 of 66 Report No.:AGC00589140505FH01 Page 66 of 66

Report No.: AGC00589140505FE10 Page 1 of 55 FCC Part 90 Rules Test Report Report No.: AGC00589140505FE10 FCC ID : PH3DJ‐A11 PRODUCT DESIGNATION : VHF FM HANDHELD TRANSCEIVER BRAND NAME : ALINCO MODEL NAME : DJ‐A11 CLIENT : Alinco Incorporated, Electronics Division DATE OF ISSUE : Jun.11, 2014 STANDARD(S) : FCC Part 90 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC00589140505FE10 Page 2 of 55 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jun.11, 2014Valid Original Report Report No.: AGC00589140505FE10 Page 3 of 55 VERIFICATION OF COMPLIANCE Applicant: Alinco Incorporated, Electronics Division Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Manufacturer: Alinco Incorporated, Electronics Division Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-Ku, Osaka 541-0043, Japan Product Designation: VHF FM HANDHELD TRANSCEIVER Brand Name: N/A Model Name: DJ-A11 Date of Test: Jun.07, 2014 to Jun.10, 2014 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C 63.4:2009. The sample tested as described in this report is in compliance with the FCC Rules Part 90 requirements The test results of this report relate only to the tested sample identified in this report. Tested by Freddie Duan Jun.11, 2014 Checked By Kidd Yang Jun.11, 2014 Authorized By Solger Zhang Jun.11, 2014 Report No.: AGC00589140505FE10 Page 4 of 55 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................. 6 1.1 PRODUCT DESCRIPTION ............................................................................................................. 6 1.3 TEST METHODOLOGY ................................................................................................................. 7 1.4 TEST FACILITY .............................................................................................................................. 7 1.5 SPECIAL ACCESSORIES .............................................................................................................. 7 1.6 EQUIPMENT MODIFICATIONS ..................................................................................................... 7 2. SYSTEM TEST CONFIGURATION ..................................................................................................... 8 2.1 EUT CONFIGURATION .................................................................................................................. 8 2.2 EUT EXERCISE ............................................................................................................................. 8 2.3 GENERAL TECHNICAL REQUIREMENTS .................................................................................... 8 2.4 CONFIGURATION OF TESTED SYSTEM .................................................................................... 9 3. SUMMARY OF TEST RESULTS ....................................................................................................... 10 4. DESCRIPTION OF TEST MODES ..................................................................................................... 11 5. CONDUCTED LIMITS ........................................................................................................................ 12 5.1 PROVISIONS APPLICABLE ......................................................................................................... 12 5.2 MEASUREMENT PROCEDURE .................................................................................................. 12 5.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 13 5.4 TEST EQUIPMENT USED ............................................................................................................ 13 5.5 TEST RESULT .............................................................................................................................. 14 6. FREQUENCY TOLERANCE .............................................................................................................. 16 6.1 PROVISIONS APPLICABLE ......................................................................................................... 16 6.2 MEASUREMENT PROCEDURE .................................................................................................. 16 6.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 17 6.4 TEST EQUIPMENT USED: ........................................................................................................... 17 6.5 TEST RESULT .............................................................................................................................. 18 7. EMISSION BANDWIDTH ................................................................................................................... 18 7.1 PROVISIONS APPLICABLE ......................................................................................................... 21 7.2 MEASUREMENT PROCEDURE .................................................................................................. 21 7.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 21 7.4 MEASUREMENT EQUIPMENT USED: ........................................................................................ 21 7.5 MEASUREMENT RESULT: ........................................................................................................... 22 8.…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION TEST SETUP CONDUCTED EMISSION TEST SETUP