PI4511BBluetooth Multimedia Module

BTM510/511 MULTIMEDIA MODULE USER MANUAL Innovative Technology for a Connected World www.lairdtech.com 2 www.lairdtech.com Laird Technologies BTM510/511 Bluetooth ® Multimedia Module CONTENTS BTM510/511 Bluetooth ® Module ..3 Overview ..............................................3 BTM510/511 Key Features ...................3 Specifications ................................4 Detailed Specifications .........................4 Pin Definitions ......................................6 Operating Parameters ...................8 Voltage Specifications ..........................8 Notes for PCB Layout ...........................8 Configuring the BTM510/511 ........9 References ...........................................9 Glossary of Terms ...............................10 AT Command Set ..............................11 Assumptions ......................................11 Commands ........................................11 General AT Commands .....................11 General Bluetooth ® Control ...............22 Hardware Unit Control .......................28 Bluetooth ® Profiles .............................30 Secure Simple Pairing .........................37 Link Key Management .......................37 Miscellaneous......................................38 Appendix ...........................................39 BT-MM Unsolicited Messages ............39 BT-MM Error Responses .....................39 Mechanical Drawings ..................41 Mechanical Details .............................41 Recommended PCB Footprint ............41 Diagrams ............................................42 Ordering Information ..................45 Product Part Numbers ........................45 General Comments ............................45 TABLE OF CONTENTS 3 www.lairdtech.com Laird Technologies BTM510/511 Bluetooth ® Multimedia Module The BTM510 and BTM511 are low-power Bluetooth ® modules designed for adding robust audio and voice capabilities. Based on the market-leading Cambridge Silicon Radio BC05 chipset, these modules provide exceptionally low power consumption with outstanding range. Supporting the latest Bluetooth Version 2.1+EDR specification, these modules provide the important advantage of secure simple pairing that improves security and enhances easy use. At only 14mm x 20mm, the compact size of the BTM510 makes it ideal for battery-powered or headset form factor audio and voice devices. With a 16-bit stereo codec and microphone inputs to support both stereo and mono applications, these modules also contain a full, integrated Bluetooth-qualified stack along with SPP, HFP 1.5, HSP, AVRCP, and A2DP profiles. Customers using these modules may list and promote their products free of charge on the Bluetooth website. The BTM510/511 modules include an embedded 32-bit, 64-MIPS DSP core within the BC05. This is integrated with the Bluetooth functionality which allows designers to add significant product enhancements including features such as echo cancellation, noise reduction, and audio enhancement using additional soft codecs. The availability of the 16MB of flash memory in the module allows complex functionality to be included. DSP routines can be licensed through a number of specialist partners. Typical applications for these modules include Bluetooth stereo headsets, VoIP phones, and wireless audio links. To speed product development and integration, Laird Technologies has developed a comprehensive AT command interface that simplifies application development, including support for audio and headset functionality. Access to GPIO pins allows mapping for direct connection to actuator buttons on headsets. Combined with a low-cost development kit, Laird Technologies’ Bluetooth ® modules provide faster time to market. FEATURES • Fully featured Bluetooth ® multimedia module • Bluetooth ® v2.1+EDR • Supports mono and stereo headset applications • Adaptive Frequency Hopping to cope with interference from other wireless devices • 32bit Kalimba DSP for enhanced audio applications • Support for Secure Simple Pairing • External or internal antenna options • HSP, HFP, A2DP, and AVRCP audio profiles • 16-bit stereo codec and microphone input • Integrated audio amplifiers for driving stereo speaker • Comprehensive AT interface for simple programming • Bluetooth END product qualified • Compact size • Class 2 output – 4dBm • Low power operation • Wi-Fi co-existence hardware support APPLICATION AREAS • High-quality stereo headsets • Mono voice headsets • Hands-free devices • Wireless audio cable replacement • MP3 and music players • Phone accessories • VoIP products • Cordless headsets • Automotive OVERVIEW AND KEY FEATURES 4 www.lairdtech.com Laird Technologies BTM510/511 Bluetooth ® Multimedia Module CATEGORIESFEATUREIMPLEMENTATION Wireless SpecificationStandards SupportedBluetooth ® v2.1 + EDR Transmit ClassClass 2 Frequency2.402 – 2.480 GHz Channels79 channels Frequency Hopping Adaptive Frequency Hopping Max Transmit Power+4 dBm @ antenna pad – BTM510 +4 dBmi from integrated antenna – BTM511 (provisional) Min Transmit Power-27 dBm @ antenna pad – BTM510 -27 dBmi from integrated antenna – BTM511 (provisional) Receive SensitivityBetter than -86 dBm Data Transfer rateUp to 300kbps RangeUp to 50 meters free space (Data) Antenna ModesExternal Antenna 50 Ohm matched SMT pad – BTM510 Integrated Antenna +0dB (provisional) multilayer ceramic – BTM511 UART InterfaceSerial InterfaceRS-232 bi-directional for commands and data 16550 compat- ible Baud RateConfigurable from 1,200 to 921,600bps Non-standard baud rates supported Bits8 ParityOdd, even, none Stop bits1 or 2 Default Serial parameters9,600,n,8,1 LevelsSet by VDD_USB pin Modem ControlDTR, DSR, DCD, RI, RTS, CTS General Purpose Interface I/O8 general purpose I/O pins I 2 SStereo Audio Digital Interface Bus LEDTwo AudioCodecIntegrated stereo codec with -95dB SNR for DAC AmplifiersDirect drive for 22Ω Mono Speaker / 44Ω Stereo Speakers MicrophoneInput with bias for low noise microphon…

Text truncated - open the document above for the full version.

EZURiO Ltd Saturn House, Mercury Park Wycombe Lane, Wooburn Green Bucks HP10 0HH England Tel: +44 (0) 1628 858940 Fax: +44 (0) 1628 528382 www.ezurio.com Registered number 5178293 Ezurio Limited FCC ID: PI4511B Request for full transmitter modular approval Item Requirements EUT 1. Have its own RF shielding. The Modular transmitter has its own RF shielding. (Please refer to the internal photograph) 2. Have buffered modulation/data inputs (if such inputs are provided). All inputs to the modules are buffered through logic or microprocessor inputs. (Please refer to schematics) 3. Have its own power supply regulation. The module contains its own power supply regulation. (Please refer to schematics) 4. Meet the antenna requirements of Section 15.203. The device has an on-board ceramic chip antenna. 5. Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing. The device is a surface mount module and was soldered to a development kit to allow access to power and data connections during testing. The device was not tested inside any other casing. (Please refer to setup photographs) 6. Be labelled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The modular transmitter will be labelled with its own FCC ID. In addition the datasheet / manual includes a statement indicating that end user equipment must have an external label, which reads; “Contains FCC ID PI4511B”. 7. The modular transmitter is manufactured so that the user cannot influence the operation of the transmitter that will operate outside of the scope of the regulations. The transmitter operation is isolated from the user by virtue of the CSR BC04 chipset and firmware. 8. Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1093. In addition, under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). A 20 cm separation distance is maintained, which satisfies mobile category requirement.

RFI Global Services Ltd Pavilion A, Ashwood Park, Ashwood Way, Basingstoke, Hampshire, RG23 8BG Tel: +44 (0) 1256 312000 Fax: +44 (0) 1256 312001 Email: [email protected] Website: www.rfi-global.com Registered in England and Wales Company number: 2117901 TCB Confirmation of Test Report This is to confirm that the following test report covers the conducted Part 15 EMC testing for the PI4511B module. 09-06-MAS-243-01, Dated 2009/10/13 This report covers testing of the 510B module. The 511B module is the same as the 510B with an added antenna and matching network. RFI Global Services Ltd

BTM511 Approvals Test Sample Description The BTM511 Bluetooth Module is a surface mount module. To facilitate the testing of this module it was soldered onto a development kit PCB. This PCB provides a power supply connection (via an on-board regulator – allowing the connection of a wide variety of external power supplies) and the data interface to the controlling PC. In addition the dev kit provides access to all of the I/O pins on the module and an example antenna configuration. This development kit is an open PCB construction and should not provide any additional shielding to the module. A photograph of the development kit is shown below: BTM511 Module USB Connector

2450 MHz AntennaP/N 2450AT42B100 Ground Clearance Requirements Minimized Detail Specification: 11/20/2008 Page 1 of 3 General Specifications Part Number2450AT42B100Input Power3W max. Frequency Range2400 - 2500 MhzImpedance50 Ω Peak Gain0 dBi typ. (XZ-V)Operating Temperature-40 to +85°C Average Gain-1.5 dBi typ. (XZ-V)Reel Quanity2,000 Return Loss9.5 dB min. No. Function Mechanical Dimensions 1 Feed Point Inmm 2 L ±± 3 W ±± 4 L1 ±± W1 ±± T a ±± Mounting Considerations Mount these devices with brown mark facing up. Units: mm Line width should be designed to provide 50 Ω impedance matching characteristics. * Note: Pins 3 & 4, although "No Connect", must be soldered to its PCB pads for proper electrical operation a) Without Matching Circuit b) With Matching Circuit Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2008 Johanson Technology, Inc. All Rights Reserved * Anchoring Pin-NC * Anchoring Pin-NC Anchoring Pin-NC 0.0200.0120.500.30 0.0792.00+.004/-.008+0.1/-0.2 0.0080.20 0.50 0.0080.20 2.600.20 "High Frequency Ceramic Solutions" 0.20 2.00 0.020 0.1020.008 0.008 0.197 0.079 5.00 a T W1 12 3 4 JTI P/N for Matching Circuit: Inductor (1.5nH): L-07C1N5SV6T Inductor (3.3nH): L-07C3N3SV6T L1 W L 2450 MHz AntennaP/N 2450AT42B100 Detail Specification: 11/20/08 Page 2 of 3 Typical Electrical Characteristics (T=25 o C) Test Board: Return Loss a) With Matching Circuit a) Without Matching Circuit Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2008 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" ) ) ) ) ) ) ) ) ) 2450 MHz AntennaP/N 2450AT42B100 Detail Specification: 11/20/08 Page 3 of 3 Typical Radiation Patterns a) Without Matching Circuit Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2008 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" ) ) ) ) ) ) ) ) )

IC ID: 1931B-BTM510B Sheet 1 of 82 Sheets ETC Report No. : 09-06-MAS-243-01 Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC 47 CFR, Part 15 Subpart C and Canada RSS-210 Report No.: 09-06-MAS-243-01 Client: Ezurio Limited. Product: Bluetooth Multimedia Module Model: BTM510 IC ID: 1931B-BTM510B Manufacturer/supplier: Aerocomm Inc Date test item received: 2009/06/11 Date test campaign completed: 2009/10/12 Date of issue: 2009/10/13 The test result onl y corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 82 pages Total number of pages of photos: External photos 2 pages Setup photos 3 pages Test Engineer Checked By Approved By Ivan Tsai James Cheng Joe Hsieh ELECTRONICS TESTING CENTER, TAIWAN NO.8, LANE 29, WENMING RD., LESHAN TSUEN, GUISHAN SHIANG, TAOYUAN COUNTY, TAIWAN 33383, R.O.C.TAIWAN, R.O.C. TEL: (03) 3276170~4 INT: +886-3-3276170~4 FAX: (03) 3276188 INT: +886-3-3276188 IC ID: 1931B-BTM510B Sheet 2 of 82 Sheets ETC Report No. : 09-06-MAS-243-01 Rev. No 1.0 Client : Ezurio Limited. Address : Saturn House, Mercury Park, Wycombe Lane, Wooburn Green HP10 0HH UK Manufacturer : Aerocomm Inc Address : 11160 Thompson Ave Lenexa, KS 66219 EUT : Bluetooth Multimedia Module Trade name : EZURiO Model No. : BTM510 Power Source : DC 3.6V (From Test Jig to Module) Regulations applied : FCC 47 CFR, Part 15 Subpart C (2008) Canada RSS-210 Issue 7 (2007) / RSS-Gen Issue 2 (2007) The testing described in this report has been carried out to the best of our knowledge and ability, and our responsibility is limited to the exercise of reasonable care. This certification is not intended to believe the sellers from their legal and/or contractual obligations. The compliance test is only certified for the test equipment and the results of the testing report relate only to the item tested. The compliance test of this report was conducted in accordance with the appropriate standards. It’s not intention to assure the quality and performance of the product. This report shall not be reproduced except in full, without the approval of ETC. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. Laboratory Introduction: Electronics Testing Center, Taiwan is recognized, filed and mutual recognition arrangement as following: 1 ISO9001: TüV Product Service 2 ISO/IEC 17025: BSMI, CNLA, NCC, NVLAP, CCIBLAC, UL, Compliance 3 Filing: FCC, Industry Canada, VCCI 4 MRA: Australia, Hong Kong, New Zealand, Singapore, USA, Japan, Korea, China, APLAC through TAF 5 FCC Registration Number: 90588, 91094, 91095 NVLAP Lab Code 200133-0 IC ID: 1931B-BTM510B Sheet 3 of 82 Sheets ETC Report No. : 09-06-MAS-243-01 Rev. No 1.0 Table of Contents Page 1 GENERAL INFORMATION ............................................................................................... 5 1.1 Product Description............................................................................................................... 5 1.2 Characteristics of Device ...................................................................................................... 5 1.3 Test Methodology ................................................................................................................. 5 1.4 Modifiction List of EUT ....................................................................................................... 5 1.5 Test Facility........................................................................................................................... 5 1.6 Test Summary ....................................................................................................................... 5 2 PROVISIONS APPLICABLE .............................................................................................. 6 2.1 Definition .............................................................................................................................. 6 2.2 Requirement for Compliance ................................................................................................7 2.3 Restricted Bands of Operation ..............................................................................................9 2.4 Labeling Requirement........................................................................................................... 9 2.5 User Information ................................................................................................................. 10 3. SYSTEM TEST CONFIGURATION ................................................................................ 11 3.1 Justification ......................................................................................................................... 11 3.2 Devices for Tested System.................................................................................................. 11 4 RADIATED EMISSION MEASUREMENT .................................................................... 12 4.1 Applicable Standard ............................................................................................................ 12 4.2 Measurement Procedure...................................................................................................... 12 4.3 Measuring Instrument ......................................................................................................... 14 4.4 Radiated Emission Data ...................................................................................................... 15 4.5 Field Strength Calculation .................................................................................................. 24 5 CONDUCTED EMISSION MEASUREMENT ................................................................ 25 5.1 Standard Applicable ............................................................................................................ 25 5.2 Measurement Procedure....…

Text truncated - open the document above for the full version.

TEST REPORT FROM RFI GLOBAL SERVICES LTD Partial Test of: 511 To: FCC Part 15.247: 2008 Subpart C Test Report Serial No: RFI/RPT1/RP76019JD03A This Test Report Is Issued Under The Authority Of Brian Watson, Operations Director: pp Checked By: R Graham Signature: Date of Issue: 04 December 2009 The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by RFI Global Services Ltd. is under license. Other trademarks and trade names are those of their respective owners. This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested. TEST REPORT SERIAL NO: RFI/RPT1/RP76019JD03A ISSUE DATE: 04 DECEMBER 2009 Page 2 of 29 RFI Global Services Ltd This page has been left intentionally blank. TEST REPORT SERIAL NO: RFI/RPT1/RP76019JD03A ISSUE DATE: 04 DECEMBER 2009 RFI Global Services Ltd Page 3 of 29 Table of Contents 1. Customer Information .................................................................................................................. 4 2. Summary of Testing ..................................................................................................................... 5 3. Equipment Under Test (EUT) ....................................................................................................... 6 4. Operation and Monitoring of the EUT during Testing ............................................................... 8 5. Measurements, Examinations and Derived Results .................................................................. 9 6. Measurement Uncertainty .......................................................................................................... 28 Appendix 1. Test Equipment Used ................................................................................................29 TEST REPORT SERIAL NO: RFI/RPT1/RP76019JD03A ISSUE DATE: 04 DECEMBER 2009 Page 4 of 29 RFI Global Services Ltd 1. Customer Information Company Name: Ezurio Ltd Address: Saturn House, Mercury Park Wycome Lane Woodburn Green Bucks HP10 0HH TEST REPORT SERIAL NO: RFI/RPT1/RP76019JD03A ISSUE DATE: 04 DECEMBER 2009 RFI Global Services Ltd Page 5 of 29 2. Summary of Testing 2.1. General Information Specification Reference: 47CFR15.247 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications) 2008: Part 15 Subpart C (Radio Frequency Devices) - Section 15.247 Specification Reference: 47CFR15.109 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications) 2008: Part 15 Subpart B (Radio Frequency Devices) - Section 15.109 Site Registration: FCC: 209735 Location of Testing: RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH. Test Dates: 17 November to 01 December 2009 2.2. Summary of Test Results FCC Reference (47CFR) Measurement Port Type Result Part 15.109 Receiver/Idle Mode Radiated Spurious Emissions Antenna Part 15.247(b)(3) Transmitter Maximum Peak Output Power Antenna Part 15.247(d) & 15.209(a) Transmitter Radiated Emissions Antenna Part 15.247(d) & 15.209(a) Transmitter Band Edge Radiated Emissions Antenna Key to Results = Complied = Did not comply 2.3. Methods and Procedures Reference: ANSI C63.4 (2003) Title: American National Standard Methods of Measurement of Electromagnetic Emissions from Low Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. Reference: DA00-705 (2000) Title: Filing and Frequency Measurement Guidelines for Frequency Hopping Spread Spectrum Systems. 2.4. Deviations from the Test Specification For the measurements contained within this test report, there were no deviations from, additions to, or exclusions from the test specification identified above. Only tests of Idle mode radiated emissions and transmitter EIRP and radiated spurious emissions were performed at the request of the client. TEST REPORT SERIAL NO: RFI/RPT1/RP76019JD03A ISSUE DATE: 04 DECEMBER 2009 Page 6 of 29 RFI Global Services Ltd 3. Equipment Under Test (EUT) 3.1. Identification of Equipment Under Test (EUT) Brand Name: Ezurio Model Name or Number: 511 Serial Number: Not stated FCC ID Number: PI4511B 3.2. Description of EUT The equipment under test was a Bluetooth Module. 3.3. Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. TEST REPORT SERIAL NO: RFI/RPT1/RP76019JD03A ISSUE DATE: 04 DECEMBER 2009 RFI Global Services Ltd Page 7 of 29 3.4. Additional Information Related to Testing Tested Technology: Bluetooth Power Supply Requirement: Nominal 5.0 V Type of Unit: Transceiver Mode: Basic Rate Enhanced Data Rate Modulation: GFSK π/4-DQPSK 8DQPSK Packet Type: (Maximum Payload) DH5 2DH5 3DH5 Data Rate (Mbit/s): 1 2 3 Maximum Transmit EIRP: 2.4 dBm Transmit Frequency Range: 2402 to 2480 MHz Channel ID Channel Number Channel Frequency (MHz) Bottom 0 2402 Middle 39 2441 Transmit Channels Tested: Top 78 2480 Receive Frequency Range: 2402 to 2480 MHz Channel ID Channel Number Channel Frequency (MHz) Bottom 0 2402 Middle 39 2441 Receive Channels Tested: Top 78 2480 3.5. Support Equipment The following support equipment was used to exercise the EUT during testing: Description: Laptop Brand Name: Sony Model Name or Number: Vaio Serial Number: 218982505100620 TEST REPORT SERIAL NO: RFI/RPT1/RP76019JD03A ISSUE DATE: 04 DECEMBER 2009 Page 8 of 29 RFI Global Services Ltd 4. Operation and Monitoring of the EUT during Testing 4.1. Operating Modes The EUT was tested in the following operating mode(s): • Transmit mode with Basic rate (DH5 packets) or EDR (2DH5 or 3DH5 packets) as required. • Receive Mode: Standalone, with the Bluetooth mode ac…

Text truncated - open the document above for the full version.

ETC Report No. : 09-06-MAS-243-01 Sheet 1 of 2 Sheets Photos of Radiation Measuring Setup x-axis ETC Report No. : 09-06-MAS-243-01 Sheet 2 of 2 Sheets y-axis