PIDASMAX365Subscriber unit

UGD-D00111 Rev L ProST Hardware Installation User Guide Software Release 7.7 ProST Hardware Installation User Guide Page 2 Commercial in Confidence UWB-D00111 Rev L Acknowledgements Airspan Networks Inc acknowledges the following trademarks used within this document: © Intel Corporation 0http://www.intel.com/ © SEQUANS COMMUNICATIONS 1http://www.sequans.com © Microsoft Corporation 2http://www.microsoft.com Copyright © Copyright by Airspan Networks Inc., 2009. All rights reserved worldwide. The information contained within this document is proprietary and is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any specific agreements protecting Airspan Networks Inc. rights in the aforesaid information. Neither this document nor the information contained herein may be published, reproduced or disclosed to third parties, in whole or in part, without the express, prior, written permission of Airspan Networks Inc. In addition, any use of this document or the information contained herein for the purposes other than those for which it is disclosed is strictly forbidden. Airspan Networks Inc. reserves the right, without prior notice or liability, to make changes in equipment design or specifications. Information supplied by Airspan Networks Inc. is believed to be accurate and reliable. However, no responsibility is assumed by Airspan Networks Inc. for the use thereof nor for the rights of third parties which may be effected in any way by the use of thereof. Any representation(s) in this document concerning performance of Airspan Networks Inc. product(s) are for informational purposes only and are not warranties of future performance, either expressed or implied. Airspan Networks Inc. standard limited warranty, stated in its sales contract or order confirmation form, is the only warranty offered by Airspan Networks Inc. in relation thereto. This document may contain flaws, omissions or typesetting errors; no warranty is granted nor liability assumed in relation thereto unless specifically undertaken in Airspan Networks Inc. sales contract or order confirmation. Information contained herein is periodically updated and changes will be incorporated into subsequent editions. If you have encountered an error, please notify Airspan Networks Inc. All specifications are subject to change without prior notice. Product performance figures quoted within this document are indicative and for information purposes only. ProST Hardware Installation User Guide Page 3 Commercial in Confidence UWB-D00111 Rev L Table of Contents Acknowledgements .......................................................................................................................... 2 Copyright .......................................................................................................................................... 2 Table of Contents ............................................................................................................................. 3 Summary of Figures ......................................................................................................................... 6 Summary of Tables .......................................................................................................................... 8 Warnings and Cautions .................................................................................................................... 9 Human Exposure to Radio Frequencies....................................................................................... 9 Radio Interference ........................................................................................................................ 9 Avoiding Radio Interference ......................................................................................................... 9 Modifications ................................................................................................................................. 9 General ......................................................................................................................................... 9 Disclaimer Statement ................................................................................................................. 10 DECLARATION OF CONFORMITY ............................................................................................... 11 FCC Notice ..................................................................................................................................... 12 Federal Communication Commission Notice ............................................................................. 12 Maximum Output TX Power ....................................................................................................... 13 700MHz Antennas ...................................................................................................................... 13 1.4 GHz Antennas ...................................................................................................................... 14 2.5 GHz Antennas ...................................................................................................................... 14 1 About this Guide ....................................................................................................................... 15 1.1 Purpose ................................................................................................................................. 15 1.2 Intended Audience ................................................................................................................ 15 1.3 Conventions .......................................................................................................................... 15 1.4 Referenced Documentation .................................................................................................. 16 2 System Overview ...............................................…

Text truncated - open the document above for the full version.

Airspan Networks Inc. Tel: +1 561 893-8670; Fax: +1 561 893-8671 , www.airspan.com December 8, 2009 Federal Communication Commission Office of Engineering and Technology USA Subject: Application for certification of the subscriber (terminal) station transceiver, FCC ID:PIDASMAX365, model name ProST 3.65G TDD Dear Gentlemen, Please find attached our application for certification of the subscriber (terminal) station transceiver, FCC ID:PIDASMAX365, model name ProST 3.65G TDD, prepared in accordance with FCC Rules, parts 2 and 90, operating frequencies 3652.5-3672.5 MHz. The product testing and this application for certification were performed by Hermon Laboratories, which is listed by FCC (Registration Numbers 90623, 90624). Hermon Labs responsible person is Mr. Michael Nikishin, EMC and Radio group manager, tel: 011 972 4626 8440, fax:011 972 4628 8277, e-mail:[email protected]. We hope this application satisfies your requirements. Sincerely yours Zion Levi compliance & testing engineer Airspan Networks Inc.

Airspan Networks Inc. Tel: +1 561 893-8670; Fax: +1 561 893-8671 , www.airspan.com December 8, 2009 Federal Communication Commission Office of Engineering and Technology USA Subject: Request for confidentiality, FCC ID:PIDASMAX365 Dear Gentlemen, In regards the exhibits submitted in support of the application for FCC ID:PIDASMAX365, please classify the following as permanent confidential under the provision of 47 CFR 0.459: 1) Schematic diagram, file “Schematic_diagram_20100”; 2) Parts list, file “Parts_list_20100”; 3) Block diagram, file “Block_diagram_20100”. These exhibits contain technical information which Airspan Networks Inc. deems to be sensitive and proprietary. Therefore this information cannot be published. If this information were to be made public it could be used to the disadvantage of the applicant in the marketplace. Many thanks in advance. Sincerely yours Zion Levi compliance & testing engineer Airspan Networks Inc.

Airspan Networks Inc. FCC ID:PIDASMAX365 Page 1 of 4 EXTERNAL PHOTOGRAPHS This document contains 3 photographs Airspan Networks Inc. FCC ID:PIDASMAX365 Page 2 of 4 Photograph No.1 “ProST 3.65G TDD” general view Airspan Networks Inc. FCC ID:PIDASMAX365 Page 3 of 4 Photograph No.2 “ProST 3.65G TDD” bottom panel view Airspan Networks Inc. FCC ID:PIDASMAX365 Page 4 of 4 Photograph No.3 “ProST 3.65G TDD” front view

Airspan Networks Inc. FCC ID:PIDASMAX365 Page 1 of 2 LABEL The label is affixed on the bottom of the subscriber radio unit as shown below. The label material is PVC with a permanent adhesive. “ ProST 3.65G TDD” bottom panel, label with FCC ID:PIDASMAX365 location FCC ID:PIDASMAX365

Airspan Networks Inc. FCC ID:PIDASMAX365 Page 1 of 7 INTERNAL PHOTOGRAPHS This document contains 6 photographs Airspan Networks Inc. FCC ID:PIDASMAX365 Page 2 of 7 Photograph No.1 “ProST 3.65G TDD” internal view Airspan Networks Inc. FCC ID:PIDASMAX365 Page 3 of 7 Photograph No.2 “ProST 3.65G TDD” internal view with case removed Airspan Networks Inc. FCC ID:PIDASMAX365 Page 4 of 7 Photograph No.3 “ProST 3.65G TDD main PCB front view Airspan Networks Inc. FCC ID:PIDASMAX365 Page 5 of 7 Photograph No.4 “ProST 3.65G TDD” main PCB second side view Airspan Networks Inc. FCC ID:PIDASMAX365 Page 6 of 7 Photograph No.5 Main PCB front view without shields Airspan Networks Inc. FCC ID:PIDASMAX365 Page 7 of 7 Photograph No.6 “ProST 3.65G TDD” antenna connector

MiMAX 3.65 Technical Note 28080511-01 Airspan Networks Inc. 1 FCC ID:PIDASMAX365 Technical Note WiMAX 3.65 GHz ProST 3.65GHz Connecting the World with Wireless Access Solutions Revision Record: WiMAX 3.65GHz Pub/ Rev Date Update Description 01 November 11 Airspan. Author: InterDoc Publication No. 28080511-01  Copyright by Airspan Networks LTD., 2003. All rights reserved worldwide. MiMAX 3.65 Technical Note 28080511-01 Airspan Networks Inc. 2 The information contained in this document is proprietary and is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any specific agreement protecting Airspan Networks LTD. rights in the aforesaid information. Neither this document nor the information contained herein may be published, reproduced or disclosed to third parties, in whole or in part, without the express, prior, written permission of Airspan Networks LTD. In addition, any use of this document or the information contained herein for any purposes other than those for which it was disclosed is strictly forbidden. Airspan Networks LTD. reserves the right, without prior notice or liability, to make changes in equipment design or specifications. Information supplied by Airspan Networks LTD. is believed to be accurate and reliable. However, no responsibility is assumed by Airspan Networks LTD. for the use thereof nor for the rights of third parties which may be effected in any way by the use thereof. Any representation(s) in this document concerning performance of Airspan Networks LTD. product(s) are for informational purposes only and are not warranties of future performance, either express or implied. Airspan Networks LTD. standard limited warranty, stated in its sales contract or order confirmation form, is the only warranty offered by Airspan Networks LTD. in relation thereto. This document may contain flaws, omissions or typesetting errors; no warranty is granted nor liability assumed in relation thereto unless specifically undertaken in Airspan Networks LTD. sales contract or order confirmation. Information contained herein is periodically updated and changes will be incorporated into subsequent editions. If you have encountered an error, please notify Airspan Networks LTD. All specifications are subject to change without prior notice. MiMAX 3.65 Technical Note 28080511-01 Airspan Networks Inc. 3 1. Scope This document provides a description of the WiMAX 3.65GHz product. 2. ProST A subscriber premises radio, ProST 3.65GHz TDD, is part of a WiMAX broadband fixed cellular wireless access system. The system provides a radio link between an end-user (a subscriber) and a network to give high-speed data access. The ProST’s transceiver/receiver (Up to 64 QAM modulation, data rate up to 37Mbps) uses OFDM and operating in TDD duplexing mode, equipped with a 16 dBi internal antenna. The maximum RF output power (not including antenna gain) is 19.73 dBm and it can be reduced by software. The ProST is installed outdoors and typically is mounted on a pole. The ProST transmits and receives traffic to and from the base station (i.e. BSR) respectively. The transceiver provides subscribers with "always-on" Internet, high speed data only, or data and voice (VoIP) services and is configured with a unique BSR reference number, preventing the ProST from relocating to another subscriber premises without authorization. . 2.1. EUT (ProST) test configuration The EUT ports and lines description is given in the table below. Port type Port description Connector type QuantityCable type Cable length (m) Indoor /outdoor Connected to Data + DC 48 VDC + Ethernet 15-pin D-type 1 Cat. 5 – 4x2 twisted pair 100 Outdoor SDA

6 Hamachtesh St. Holon 58810 ISRAEL P.O.Box 5 Azur 58008 Tel:+972-3-5599661 Fax: +972-3-5599677 e-mail: [email protected] 1 3.3 – 3.8 GHz Antenna MA-WA36-AS16 Specifications Electrical Frequency range 3.3 – 3.8 GHz GAIN 16 dBi typ. @ 15 dBi min. VSWR, max. 1.5: 1 3dB Beam Width - Azimuth, Typical 20° 3dB Beam Width - Elevation, Typical 20° Polarization Linear, Vertical Side-lobes Level, min. EN 302 085 Class TS2 Cross Polarization, min EN 302 085 Class TS2 Front to back, min EN 302 085 Class TS2 Power Handling 6 Watt Input Impedance 50 Ohm Mechanical and Environmental Dimensions (LXWXH) 275 x 180 x 0.8 mm Connector MCX, Male Radome Airspan Enclosure Flammability UL 94V-0 Operating Temperature -40° to +85° Lightning Protection DC Grounded

Company name: Airspan Networks Inc. Address: 777 Yamato Road Suite 310 Boca Raton FL 33431 USA FCC ID:PIDASMAX365 ProST statement DC voltages/ currents supplied to elements of the final radio frequency amplifying device for normal operation over the power range: 5 V/ 0.8 A. Name of authorized person: Zion Levy Position: Compliances & Testing Engineer Date:November 11, 2009 Airspan Networks Inc. Tel: +1 561 893-8670; Fax: +1 561 893-8671 , www.airspan.com

Company name: Airspan Networks Inc. Address: 777 Yamato Road Suite 310 Boca Raton FL 33431 USA FCC ID:PIDASMAX365 ProST 3.65GHz Tune up procedure Each ProST radio has been tested by automatic test station. As part of the test , the Maximum RF output power value has been masured. In case the RF output power is higher then specified in the System Description, the ProST radio doesn’t pass the test and gets Fail status. ProST boards with Fail status can not be assembled as part of final product. Name of authorized person: Zion Levy Position: Compliances & Testing Engineer Date: November 11, 2009 Airspan Networks Inc. Tel: +1 561 893-8670; Fax: +1 561 893-8671 , www.airspan.com

Airspan Networks Inc. FCC ID:PIDASMAX365 Page 1 of 1 Environmental evaluation and exposure limit according to FCC CFR 47part 1, §1.1307, §1.1310 The calculation was done for required safe distance. Limit for power density for general population/uncontrolled exposure is 1 mW/cm 2 for 1500 -100000 MHz frequency range: The power density P (mW/cm 2 ) = P T / 4π r 2 , where P T is the maximum equivalent isotropically radiated power (EIRP). The peak output power of 19.73 dBm with 16 dBi antenna gain corresponds to the equivalent isotropically radiated power (EIRP) of 19.73 dBm + 16 dBi = 35.73 dBm, which is equal to 3741 mW. The minimum safe distance “r”, where RF exposure does not exceed FCC permissible limit, is r = sqrt { P T / (Px4π)} = sqrt {3741/ 12.56} = 17 cm. General public cannot be exposed to dangerous RF level.

Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Tel. +972-4-6288001 Fax. +972-4-6288277 E-mail: [email protected] Page 1 of 80 Report ID: AIRRAD_FCC.20100.doc Date of Issue: 11/25/2009 Electrical 839.01 TEST REPORT ACCORDING TO: FCC CFR 47 PART 90 subpart Z FOR: Airspan Networks (Israel) Ltd. Subscriber unit Model: ProST 3.65G TDD This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: AIRRAD_FCC.20100.doc Date of Issue: 11/25/2009 Page 2 of 80 Table of contents 1 Applicant information..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details.................................................................................................................................................................... 3 5 Tests summary.............................................................................................................................................................. 4 6 EUT description............................................................................................................................................................. 5 6.1 General information....................................................................................................................................................... 5 6.2 Ports and lines .............................................................................................................................................................. 5 6.3 Support and test equipment .......................................................................................................................................... 5 6.4 Changes made in the EUT ............................................................................................................................................ 5 6.5 Test configuration.......................................................................................................................................................... 6 6.6 Transmitter characteristics ............................................................................................................................................ 7 7 Transmitter tests according to 47CFR part 90 requirements......................................................................................... 8 7.1 Peak output power test.................................................................................................................................................. 8 7.2 Occupied bandwidth test ............................................................................................................................................. 17 7.3 Emission mask test ..................................................................................................................................................... 22 7.4 Radiated spurious emission measurements................................................................................................................ 30 7.5 Spurious emissions at RF antenna connector test ...................................................................................................... 48 7.6 Frequency stability test................................................................................................................................................ 62 8 APPENDIX A Test equipment and ancillaries used for tests....................................................................................... 64 9 APPENDIX B Measurement uncertainties................................................................................................................... 66 10 APPENDIX C Test laboratory description ................................................................................................................... 67 11 APPENDIX D Specification references ....................................................................................................................... 67 12 APPENDIX E Test equipment correction factors......................................................................................................... 68 13 APPENDIX F Abbreviations and acronyms................................................................................................................. 80 Report ID: AIRRAD_FCC.20100.doc Date of Issue: 11/25/2009 Page 3 of 80 1 Applicant information Client name: Airspan Networks Inc. Address: 777 Yamato Rd, Suite 310, Boca Raton 33431, Florida, USA Telephone: +1 561 893 8686 Fax: +1 561 893 8671 E-mail: [email protected] Contact name: Mr. Zion Levi 2 Equipment under test attributes Product name: Subscriber unit Model(s): ProST 3.65GHz TDD Serial number: P/N 90802014; S/N 874F72C24AZ74 Hardware version: A0 Software release: 22.17.3t1 Receipt date 11/08/2009 3 Manufacturer information Manufacturer name: Airspan Networks Inc. Address: 777 Yamato Rd, Suite 310, Boca Raton 33431, Florida, USA Telephone: +1 561 893 8686 Fax: +1 561 893 8671 E-Mail: [email protected] Contact name: Mr. Zion Levi 4 Test details Project ID: 20100 Location: Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Test started: 11/08/2009 Test completed: 11/10/2009 Test specification(s): 47CFR part 90 subpar…

Text truncated - open the document above for the full version.

Airspan Networks Inc. FCC ID:PIDASMAX365 Page 1 of 8 SETUP PHOTOGRAPHS This document contains 7 photographs Airspan Networks Inc. FCC ID:PIDASMAX365 Page 2 of 8 Photograph No.1 Peak output power, occupied bandwidth, emission mask, conducted spurious emissions measurement setup Airspan Networks Inc. FCC ID:PIDASMAX365 Page 3 of 8 Photograph No.2 Spurious emissions measurement setup in the anechoic chamber below 30 MHz Airspan Networks Inc. FCC ID:PIDASMAX365 Page 4 of 8 Photograph No.3 Spurious emissions measurement setup in the anechoic chamber in 30 -1000 MHz Airspan Networks Inc. FCC ID:PIDASMAX365 Page 5 of 8 Photograph No.4 Spurious emissions measurement setup in the anechoic chamber above 1000 MHz Airspan Networks Inc. FCC ID:PIDASMAX365 Page 6 of 8 Photograph No.5 Spurious emissions measurement setup at the OATS above 1000 MHz Airspan Networks Inc. FCC ID:PIDASMAX365 Page 7 of 8 Photograph No.6 Setup for substitution method of spurious ERP measurements Airspan Networks Inc. FCC ID:PIDASMAX365 Page 8 of 8 Photograph No.7 Frequency stability measurement setup