PINHA-T006Transmitter for RKE System

HYUNDAI AUTONET Co., Ltd. San 136-1, Ami-ri, Bubal-eup, Ichon-si, Kyoungki-do, 467-701, Korea Remote Keyless Entry (HA-T006) - INDEX - - Description of Transmitter - Block diagram from Transmitter - An outline 1. How to use HA-T006 - HA-T006 & HA-B006 is Remote Keyless System. - This unit controll door lock/unlock/tail gate unlock with wireless. - This unit consist of Transmitter(HA-T006) 2. Introduction of Transmitter(HA-T006) - Transmitter has three buttons - Transmitter use the battery - Freqency is 315 MHz - Modulation item is SAW Resonator - Transmitter use Rolling code algorithm 3. Regulatory Information - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES - Operation is subject to the following two conditions; (1) this device may not cause harmful interface, and An outline of Transmitter (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes and modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1. PRIMARY FUNTION - Remote door lock/unlock/tail gate unlock - LED turn on ( When button is pushed ) - Operating distance : 30 m over - Id input(setting mode) 2. ELECTRICAL CHARACTERISTICS Description of Transmitter Operating voltage3 VDC TRANSMITTER model nameHA-T006 ETCAM modulation Operating temperature - 20 ~ +°C Consumption currentMax 12 mA Sensitivity- Operating frequency Power10 mW under 315 3. OPERATING DIAGRAM 1) TRANSMITTER A) DATA FRAME B) DATA FORMAT C) TRANSMISSION SPECIFICATION - BAUD RATE : 1 kbps - CODING METHOD : MANCHESTER - TRANSMISSION BIT COUNT : 380BIT - TRANSMISSION TIME : 380 ms±15% LOGIC "1"LOGIC "0" A. TRANSMITTER(HA-T006) Block diagram from Transmitter

A. TRANSMITTER(HA-T006) Block diagram from Transmitter

(Contact Person/Title) HYUNDAI AUTONET Co., Ltd. San 136-1, Ami-ri, Bubal-eup, Ichon-si, Kyoungki-do, 467-701, South Korea Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD21046 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission's Rules (47 C.F.R) and Section §552(b)(4) of the Freedom of Information Act, HYUNDAI AUTONET Co., Ltd. requests confidentiality for the following products: FCC ID Number Product Title / Model PINHA-T006 Transmitter for RKE System/HA-T006 For the product stated above, we request that the following information be held confidential: 1) Schematic diagrams 2) Bill of materials (Part List) No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain HYUNDAI AUTONET Co., Ltd. trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our products. This material is not customarily available to the general public and we request that it be withheld from public inspection. Sincerely, Kelvin Nam / Senior Research Enginee

SK TECH CO., LTD. Page 1 of 1 SKTTRT-070308-005 FCC ID: PINHA-T006 External Photographs of EUT <Photograph 1: Front View> <Photograph 2: Rear View>

ID Label Location & Sample LABEL LOCATION: Label will be printed on the REAR of the product LABEL Drawing TRANSMITTER DC 3 V FCC ID: PINHA-T006 S/N: HYUNDAI AUTONET CO., LTD. MADE IN KOREA

SK TECH CO., LTD. Page 1 of 2 SKTTRT-070308-005 FCC ID: PINHA-T006 Internal Photographs of EUT <Photograph 1: Cover removed> SK TECH CO., LTD. Page 2 of 2 SKTTRT-070308-005 FCC ID: PINHA-T006 <Photograph 2: RF Board Front View> <Photograph 3: RF Board Rear View >

Operational Description The product, HA-T006, is a transmitter for RKE System. When the user presses a button on it, the transmitter transmits activation codes just once. The transmission time is about 375 ms. The product is powered from a 3 V Lithium battery. 1) FUNCTIONS - Remote door lock/unlock/tail gate unlock - LED turn on (When button is pushed) - Operating distance: 30 m over - Id input (setting mode) 2) DATA FRAME 3) TRANSMISSION SPECIFICATION - BAUD RATE: 1 kbps - CODING METHOD: MANCHESTER - TRANSMISSION BIT COUNT: 2 FRAME = 380BIT - TRANSMISSION TIME: 380 ms ± 15 %

SK TECH CO., LTD. Page 1 of 13 0 Report No. : SKTTRT-070308-005 FCC ID: PINHA-T006 Certificate of Compliance Test Report No.: SKTTRT-070308-005 KOLAS NO.: KT191 Applicant: HYUNDAI AUTONET Co., Ltd. Applicant Address: San 136-1, Ami-ri, Bubal-eup, Ichon-si, Kyoungki-do, 467-701, South Korea Manufacturer: HUF KOREA LIMITED. Manufacturer Address: 710, Baeksuk-dong, Chonan, Chungnam, Republic of Korea Device Under Test: Transmitter for RKE System FCC ID: PINHA-T006 Model No.: HA-T006 Receipt No.: SKTEU07-0129 Date of receipt: Feb. 13, 2007 Date of Issue: March 08, 2007 Location of Testing: SK TECH CO., LTD. 820-2, Wolmoon-Ri, Wabu-Up, Namyangju-Si, Kyunggi-Do, Korea Test Procedure: ANSI C63.4 / 2003 Test Specification: 47CFR, Part 15 Subpart C Equipment Class: DSC - Part 15 Security/Remote Control Transmitter Test Result: The above-mentioned device has been tested and passed. Tested & Reported by: Seong-Baek, Ko 2007. 03. 08 Approved by: Jong-Soo, Yoon 2007. 03. 08 Signature Date Signature Date Other Aspects: Abbreviations: · OK, Pass = passed · Fail = failed · N/A = not applicable ☞ z The above test certificate is the accredited test results by Korea Laboratory Accreditation Scheme, which signed the ILAC-MRA. z This test report is not permitted to copy partly without our permission. z This test result is dependent on only equipment to be used. z This test result is based on a single evaluation of one sample of the above mentioned. z We certify that this test report has been based on the measurement standards that is traceable to the national or International standards. SK TECH CO., LTD. Page 2 of 13 0 Report No. : SKTTRT-070308-005 FCC ID: PINHA-T006 >> CONTENTS << 1. GENERAL ......................................................................................................................... 3 2. TEST SITE ........................................................................................................................ 3 2.1 Location ...................................................................................................................... 3 2.2 List of Test and Measurement Instruments ................................................................. 4 2.3 Test Date ..................................................................................................................... 4 2.4 Test Environment ........................................................................................................ 4 3. DESCRIPTION OF THE EQUIPMENT UNDER TEST ............................................. 5 3.1 Rating and Physical Characteristics ........................................................................... 5 3.2 Equipment Modifications ··························································································· 5 3.3 Submitted Documents ································································································· 5 4. MEASUREMENT CONDITIONS .................................................................................. 6 4.1 Description of test configuration ................................................................................ 6 4.2 List of Peripherals .......................................................................................................6 4.3 Uncertainty ................................................................................................................. 6 5. TEST AND MEASUREMENTS ...................................................................................... 7 5.1 ANTENNA REQUIREMENT ................................................................................. 7 5.1.1 Regulation ............................................................................................................ 7 5.1.2 Result ...................................................................................................................7 5.2 OCCUPIED BANDWIDTH / Dwell Time................................................................ 8 5.2.1 Regulation ............................................................................................................ 8 5.2.2 Test Procedure ..................................................................................................... 8 5.2.3 Test Results .......................................................................................................... 9 5.3 RADIATED EMISSIONS .........................................................................................11 5.3.1 Regulation ...........................................................................................................11 5.3.2 Test Procedure ....................................................................................................11 5.3.3 Calculation of Average Correction Factor ........................................................... 12 5.3.4 Test Results.......................................................................................................... 13 SK TECH CO., LTD. Page 3 of 13 0 Report No. : SKTTRT-070308-005 FCC ID: PINHA-T006 1. GENERAL These tests were performed using the test procedure outlined in ANSI C63.4, 2003 for intentional radiators, and in accordance with the limits set forth in FCC Part 15.231 for Remote Control / Security Device Transceiver. The EUT (Equipment Under Test) has been shown to be capable of compliance with the applicable technical standards. We attest to the accuracy of data. All measurements reported herein were performed by SK TECH CO., LTD. and were made under Chief Engineer’s supervision. We assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. 2. TEST SITE SK TECH CO., LTD. 2.1 Location 820-2, Wolmoon-Ri, Wabu-Up, Namyangju-Si, Kyunggi-Do, Korea This test site is in compliance with ISO/IEC 17025 for general requirements for the competence of testing and calibration laboratories. This laboratory is recognized as a Conformity Assessment…

Text truncated - open the document above for the full version.

SK TECH CO., LTD. Page 1 of 1 SKTTRT-070308-005 FCC ID: PINHA-T006 Test set up photos <Radiated Emissions - Front View> <Radiated Emissions - Rear View>