PPD-AR5BMD22802.11 a/b/g/n + BT Combo Card

AR5BMD22 Product name： ：： ：802.11 a/b/g/n + BT Combo Card © 2000–2009 by Qualcomm Atheros, Inc.. All rights reserved. Atheros ® , Atheros Driven ® , Atheros XR ® , Driving the Wireless Future ® , ROCm ® , Super AG ® , Super G ® , Total 802.11n ® , and Wake on Wireless ® are registered by Qualcomm Atheros, Inc. Atheros SST™, Signal- Sustain Technology™, the Air is Cleaner at 5-GHz™, XSPAN™, Wireless Future. Unleashed Now.™, and 5-UP™ are trademarks of Qualcomm Atheros, Inc.The Atheros logo is a registered trademark of Qualcomm Atheros, Inc. All other trademarks are the property of their respective holders. Notice The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice, and Qualcomm Atheros, Inc. (Atheros) assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any updates. Atheros reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Atheros does not represent that products described herein are free from patent infringement or from any other third party right. No part of this document may be reproduced, adapted or transmitted in any form or by any means, electronic or mechanical, for any purpose, except as expressly set forth in a written agreement signed by Atheros. Atheros or its affiliates may have patents or pending patent applications, trademarks, copyrights, maskwork rights or other intellectual property rights that apply to the ideas, material and information expressed herein. No license to such rights is provided except as expressly set forth in a written agreement signed by Atheros. ATHEROS MAKES NO WARRANTIES OF ANY KIND WITH REGARD TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT SHALL ATHEROS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL SPECULATORY OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. IN PARTICULAR, ATHEROS SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA TRANSMITTED OR OTHERWISE USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE OR DATA. ATHEROS SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE AS THEY MIGHT OTHERWISE APPLY TO THIS DOCUMENT AND TO THE IDEAS, MATERIAL AND INFORMATION EXPRESSED HEREIN. Qualcomm Atheros, Inc. • iii COMPANY CONFIDENTIAL April 2012 Document Conventions Text Conventions bold Bold type within paragraph text indicates commands, file names, directory names, paths, output, or returned values. Example: The DK_Client package will not function unless you use the wdreg_install batch file. italic Within commands, italics indicate a variable that the user must specify. Example: mem_alloc size_in_bytes Titles of manuals or other published documents are also set in italics. Courier The Courier font indicates output or display. Example: Error:Unable to allocate memory for transfer! Menu The Menu character tag is used for menu items. Example: Choose Edit > Copy. [ ] Within commands, items enclosed in square brackets are optional parameters or values that the user can choose to specify or omit. { } Within commands, items enclosed in braces are options from which the user must choose. | Within commands, the vertical bar separates options. ... An ellipsis indicates a repetition of the preceding parameter. > The right angle bracket separates successive menu selections. Example: Start > Programs > DK > wdreg_install. Notices NOTE: This message denotes neutral or positive information that calls out important points to the text. A note provides information that may apply only in special cases. Qualcomm Atheros, Inc. 1700 Technology Drive, San Jose, CA 95110 t: 408/773-5200 f: 408/773-9940 Revision History Revision Description of Changes March 2009 Initial Release Qualcomm Atheros, Inc. • v COMPANY CONFIDENTIAL April 2012 Contents Introduction .......................................................................................................... 7 System Requirements .................................................................................... 7 Profile Management ............................................................................................. 7 Create or Modify a Configuration Profile .................................................... 7 Remove a Configuration Profile ................................................................... 8 Auto Profile Selection Management .................................................................... 8 Switching to a Different Configuration Profile .................................................. 9 Import and Export Profiles ................................................................................... 9 Importing a Profile ................................................................................................ 9 Exporting a Profile ................................................................................................ 9 TCP/IP Configuration ......................................................................................... 9 Configuring the TCP/IP Address for the network device: .................................. 9 General Tab ......................................................................................................... 10 Advanced Tab ..................................................................................................... 10 Security Tab ........................................................................................................ 11 Using EAP-TLS Security .............................................................................. 12 Using EAP-…

Text truncated - open the document above for the full version.

QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com Date:2012/4/10 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: PPD-AR5BMD22 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Theory of Operation Addendum - Regulatory algorithms Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to DA 04-1705 of the Commission’s Rules, we request short-term confidential treatment for the following information until May 1 st , 2012 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Michael Green / Manager, Global Product Compliance

J QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 www.qualcomm.com June 15, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Authorization of Handling FCC Regulatory Applications To Whom It May Concern: I, hereby, authorize Mr. Michael Green, to handle FCC Regulatory related applications for QUALCOMM ATHEROS Incorporated and sign all required application documents. Best Regards, Paul Guckian VP, Engineering QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121 Office: 858-651-1547 [email protected]

QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com Power of Attorney 2012/4/10 To whom it may concern: We, the undersigned Qualcomm Atheros, Inc. hereby authorize Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15 approval and any communication needed with the national authority. Any and all acts carried out by BVCPS on our behalf shall have the same effects as acts of our own. This authorization is limited to the following products： FCC ID: PPD-AR5BMD22 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Michael Green / Manager, Global Product Compliance

FCC ID: PPD-AR5BMD22 Report No. : RF120120E03 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch April 19, 2012 Dear Application Examiner, Atheros Communications, Inc., It’s a 802.11 a/b/g/n + BT Combo Card, FCC ID: PPD-AR5BMD22, would like to have your authorization as a modular approval. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip AR9462. 3. “The modular transmitter must have its own power supply regulation part no.: AR9462. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration”. The EUT is tested in a stand-alone configuration via an extender. Please see section Photographs of Test Configuration in the test report. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: PPD-AR5BMD22 Report No. : RF120120E03 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Hank Chung Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com 2012/4/10 To whom it may concern: We, the undersigned, attest that this device does support “TPC” Transmit Power Control in the 5 GHz UNII bands. The software and associated drivers to support TPC are built into the device firmware, with no mechanism to disable or turn off TPC. This authorization is limited to the following products： Model name：AR5BMD22 FCC ID: PPD-AR5BMD22 IC：4104A-AR5BMD22 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Michael Green / Manager, Global Product Compliance

Report No.: 120120E03 Page 1 CONSTRUCTION PHOTOS OF EUT Report No.: 120120E03 Page 3

PROPOSED FCC ID LABEL AND LOCATION Printed Color： ：： ： Black 地色 地色地色 地色 ： ：： ：White 材質 材質材質 材質 ： ：： ：一般合成紙 一般合成紙一般合成紙 一般合成紙 粘著材 粘著材粘著材 粘著材 ： ：： ：樹脂系糊 樹脂系糊樹脂系糊 樹脂系糊 Bottom of EUT FCC / IC Label Location QUALCOMM ATHEROS, INC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: PPD-AR5BMD22 IC: 4104A-AR5BMD22 Model:AR5BMD22

Report No.: 120120E03 Page 2

Report No.: SA120120E03 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA120120E03 MODEL NO.: AR5BMD22 FCC ID: PPD-AR5BMD22 RECEIVED: Jan. 20, 2012 TESTED: Apr. 14, 2012 ISSUED: Apr. 17, 2012 APPLICANT: Qualcomm Atheros, Inc. ADDRESS: 1700 Technology Drive, San Jose, CA 95110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This test report consists of 10 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA120120E03 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD....................................................................................3 1. CERTIFICATION......................................................................................................4 2. RF EXPOSURE LIMIT..............................................................................................5 3. MPE CALCULATION FORMULA.............................................................................5 4. CLASSIFICATION....................................................................................................5 5. ANTENNA GAIN.......................................................................................................6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER...........................7 Report No.: SA120120E03 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120120E03 Original release Apr. 17, 2012 Report No.: SA120120E03 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT: 802.11 a/b/g/n + BT Combo Card BRAND NAME: Atheros MODEL NO.: AR5BMD22 TEST SAMPLE: R&D SAMPLE APPLICANT: Qualcomm Atheros, Inc. STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: AR5BMD22) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Apr. 17, 2012 ( Midoli Peng, Specialist ) APPROVED BY : , DATE: Apr. 17, 2012 ( May Chen, Deputy Manager ) Report No.: SA120120E03 Report Format Version 4.0.0 5 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120120E03 Report Format Version 4.0.0 6 5. ANTENNA GAIN The antenna provided to the EUT, please refer to the following table: Antenna Gain (dBi)< included cable loss> No. Brand Model Antenna Type Connector For 2.4GHz For 5GHz (5.15~5.35) For 5GHz (5.47~5.725) For 5GHz (5.725~5.850) 1&2 WNC 81.EBJ15.005 PIFA IPEX 3.62 3.08 4.76 4.76 Cable Loss: Cable Loss(dB) No. Brand Model For 2.4GHz For 5GHz (5.15~5.35) For 5GHz (5.47~5.725) For 5GHz (5.725~5.850) Cable Length 1&2 WNC 81-EBJ15.005 1.15 1.70 1.74 1.79 300 Note: 1. Above antenna gains of antenna are Total (H+V). 2. The EUT incorporates CDD function with802.11a/b/g. 2. 3. Main -- Wireless & BT / Aux -- Wireless Report No.: SA120120E03 Report Format Version 4.0.0 7 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For WLAN (2.4GHz): Single chain - 802.11b FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 125.893 3.62 20 0.058 1.00 Single chain - 802.11g FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 263.027 3.62 20 0.120 1.00 Multiple chain - 802.11b FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 129.439 6.63 20 0.119 1.00 Directional gain = gain of antenna element + 10 log (# of TX antenna elements) Effective Legacy Gain (dBi)=6.63 Multiple chain - 802.11g FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 335.783 6.63 20 0.307 1.00 Directional gain = gain of antenna element + 10 log (# of TX antenna elements) Effective Legacy Gain (dBi)=6.63 802.11n (20MHz) FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 320.670 3.62 20 0.146 1.00 Report No.: SA120120E03 Report Format Version 4.0.0 8 802.11n (40MHz) FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2422-2452 263.652 3.62 20 0.121 1.00 For 15.247(5GHz): Single chain - 802.11a FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5745 ~ 5825 151.356 4.76 20 0.090 1.00 Multiple chain - 802.11a FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5745 ~ 5…

Text truncated - open the document above for the full version.

Report No.: RF120120E03-3 1 Report Format Version 4.2.0 DFS TEST REPORT REPORT NO.: RF120120E03-3 MODEL NO.: AR5BMD22 FCC ID: PPD-AR5BMD22 IC: 4104A-AR5BMD22 RECEIVED: Jan. 20, 2012 TESTED: Apr. 12, 2012 ISSUED: Apr. 17, 2012 APPLICANT: Qualcomm Atheros, Inc. ADDRESS: 1700 Technology Drive, San Jose, CA 95110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This test report consists of 26 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF120120E03-3 2 Report Format Version 4.2.0 Table of Contents RELEASE CONTROL RECORD..............................................................................3 1. CERTIFICATION...........................................................................................4 2. EUT INFORMATION.....................................................................................5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT...........................5 2.2 EUT SOFTWARE AND FIRMWARE VERSION............................................5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT..........................6 2.4 EUT MAXIMUM CONDUCTED POWER......................................................7 2.5 EUT MAXIMUM EIRP POWER.....................................................................8 2.6 TRANSMIT POWER CONTROL (TPC).........................................................8 2.7 STATEMENT OF MAUNFACTURER............................................................9 3. U-NII DFS RULE REQUIREMENTS...........................................................10 3.1 WORKING MODES AND REQUIRED TEST ITEMS..................................10 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS.................................11 4. TEST & SUPPORT EQUIPMENT LIST.......................................................14 4.1 TEST INSTRUMENTS................................................................................14 4.2 DESCRIPTION OF SUPPORT UNITS........................................................14 5. TEST PROCEDURE...................................................................................15 5.1 BVADT DFS MEASUREMENT SYSTEM:...................................................15 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL:.....................16 5.3 DEVIATION FROM TEST STANDARD.......................................................17 5.4 CONDUCTED TEST SETUP CONFIGURATION........................................17 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE.......................................17 6. TEST RESULTS..........................................................................................18 6.1 SUMMARY OF TEST RESULTS.................................................................18 6.2 DETAIL TEST RESULTS.............................................................................19 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE...................................................................................19 6.2.1.1 DFS DETECTION THRESHOLD................................................................19 6.2.1.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME......20 6.2.1.3 NON- OCCUPANCY PERIOD....................................................................21 7. INFORMATION ON THE TESTING LABORATORIES................................24 8. APPENDIX-A..............................................................................................25 9. APPENDIX B - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB......................................................26 Report No.: RF120120E03-3 3 Report Format Version 4.2.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF120120E03-3 Original release Apr. 17, 2012 Report No.: RF120120E03-3 4 Report Format Version 4.2.0 1. CERTIFICATION PRODUCT: 802.11 a/b/g/n + BT Combo Card BRAND NAME : Atheros MODEL NO.: AR5BMD22 TEST SAMPLE: R&D SAMPLE APPLICANT: Qualcomm Atheros, Inc. TESTED: Apr. 12, 2012 STANDARDS: FCC Part 15, Subpart E (Section 15.407) FCC 06-96 RSS-210 Issue 8 (Annex 9) The above equipment (Model: AR5BMD22) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and was in compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Apr. 17, 2012 ( Midoli Peng, Specialist ) APPROVED BY : , DATE: Apr. 17, 2012 ( May Chen, Deputy Manager ) Report No.: RF120120E03-3 5 Report Format Version 4.2.0 2. EUT INFORMATION 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT TABLE 1: OPERATING FREQUENCY BANDS AND MODE OF EUT OPERATING FREQUENCY RANGE OPERATIONAL MODE 5250~5350MHz 5470~5725MHz Client without radar detection and ad hoc function ̧ ̧ 2.2 EUT SOFTWARE AND FIRMWARE VERSION TABLE 2: THE EUT SOFTWARE/FIRMWARE VERSION NO. PRODUCT MODEL NO. SOFTWARE/FIRMWARE VERSION 1 802.11 a/b/g/n + BT Combo Card AR5BMD22 Driver Version: 999.0.0.62 Report No.: RF120120E03-3 6 Report Format Version 4.2.0 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT TABLE 3: ANTENNA LIST Antenna Set Brand Model Type Operation Frequency Range Max. Gain(dB…

Text truncated - open the document above for the full version.

Report No.: RF120120E03-1 R2 1 Report Format Version 4.2.0 Cancels and replaces the report No.: RF120120E03-1 R1 dated: May 03, 2012 FCC TEST REPORT (15.407) REPORT NO.: RF120120E03-1 R2 MODEL NO.: AR5BMD22 FCC ID: PPD-AR5BMD22 IC: 4104A-AR5BMD22 RECEIVED: Jan. 20, 2012 TESTED: Feb. 06 to Apr. 12, 2012 ISSUED: May 07, 2012 APPLICANT: Qualcomm Atheros, Inc. ADDRESS: 1700 Technology Drive, San Jose, CA 95110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This test report consists of 300 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF120120E03-1 R2 2 Report Format Version 4.2.0 Cancels and replaces the report No.: RF120120E03-1 R1 dated: May 03, 2012 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 4 1. CERTIFICATION .................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................ 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................ 7 3. GENERAL INFORMATION ..................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 8 3.2 DESCRIPTION OF ANTENNA ............................................................................. 10 3.3 DESCRIPTION OF TEST MODES ....................................................................... 11 3.3.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 13 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 15 3.5 DUTY CYCLE OF TEST SIGNAL ......................................................................... 15 3.6 DESCRIPTION OF SUPPORT UNITS .................................................................. 16 3.7 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 17 4. TEST TYPES AND RESULTS .............................................................................. 18 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................ 18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 18 4.1.2 TEST INSTRUMENTS .......................................................................................... 18 4.1.3 TEST PROCEDURES .......................................................................................... 19 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 19 4.1.5 TEST SETUP ....................................................................................................... 20 4.1.6 EUT OPERATING CONDITIONS ......................................................................... 20 4.1.7 TEST RESULTS ................................................................................................... 21 4.2 UNWANTED EMISSION MEASUREMENT .......................................................... 23 4.2.1 LIMITS OF UNWANTED EMISSION MEASUREMENT ........................................ 23 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ..... 24 4.2.3 TEST INSTRUMENTS .......................................................................................... 25 4.2.4 TEST PROCEDURES .......................................................................................... 26 4.2.5 DEVIATION FROM TEST STANDARD ................................................................. 27 4.2.6 TEST SETUP ....................................................................................................... 27 4.2.7 EUT OPERATING CONDITION ............................................................................ 27 4.2.8 TEST RESULTS (RADIATED TEST) .................................................................... 28 4.2.9 TEST RESULTS (CONDUCTED TEST) ............................................................... 66 4.3 TRANSMIT POWER MEASUREMENT .............................................................. 108 4.3.1 LIMITS OF OUTPUT TRANSMIT POWER MEASUREMENT ............................. 108 4.3.2 TEST INSTRUMENTS ........................................................................................ 108 4.3.3 TEST PROCEDURE ........................................................................................... 109 4.3.4 DEVIATION FROM TEST STANDARD ............................................…

Text truncated - open the document above for the full version.