PPD-ARS263SB1x1 802.11b/g/n +BT SDIO-WLAN/USB-BT Card

ARS263-SB Product name： ：： ：1x1 802.11b/g/n +BT SDIO-WLAN/USB-BT Card © 2000–2009 by Atheros Communications, Inc. All rights reserved. Atheros ® , Atheros Driven ® , Atheros XR ® , Driving the Wireless Future ® , ROCm ® , Super AG ® , Super G ® , Total 802.11n ® , and Wake on Wireless ® are registered by Atheros Communications, Inc. Atheros SST™, Signal-Sustain Technology™, the Air is Cleaner at 5-GHz™, XSPAN™, Wireless Future. Unleashed Now.™, and 5-UP™ are trademarks of Atheros Communications, Inc. The Atheros logo is a registered trademark of Atheros Communications, Inc. All other trademarks are the property of their respective holders. Notice The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice, and Atheros Communications, Inc. (Atheros) assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any updates. Atheros reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Atheros does not represent that products described herein are free from patent infringement or from any other third party right. No part of this document may be reproduced, adapted or transmitted in any form or by any means, electronic or mechanical, for any purpose, except as expressly set forth in a written agreement signed by Atheros. Atheros or its affiliates may have patents or pending patent applications, trademarks, copyrights, maskwork rights or other intellectual property rights that apply to the ideas, material and information expressed herein. No license to such rights is provided except as expressly set forth in a written agreement signed by Atheros. ATHEROS MAKES NO WARRANTIES OF ANY KIND WITH REGARD TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT SHALL ATHEROS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL SPECULATORY OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. IN PARTICULAR, ATHEROS SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA TRANSMITTED OR OTHERWISE USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE OR DATA. ATHEROS SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE AS THEY MIGHT OTHERWISE APPLY TO THIS DOCUMENT AND TO THE IDEAS, MATERIAL AND INFORMATION EXPRESSED HEREIN. Atheros Communications, Inc. • iii COMPANY CONFIDENTIAL April 2011 Document Conventions Text Conventions bold Bold type within paragraph text indicates commands, file names, directory names, paths, output, or returned values. Example: The DK_Client package will not function unless you use the wdreg_install batch file. italic Within commands, italics indicate a variable that the user must specify. Example: mem_alloc size_in_bytes Titles of manuals or other published documents are also set in italics. Courier The Courier font indicates output or display. Example: Error:Unable to allocate memory for transfer! Menu The Menu character tag is used for menu items. Example: Choose Edit > Copy. [ ] Within commands, items enclosed in square brackets are optional parameters or values that the user can choose to specify or omit. { } Within commands, items enclosed in braces are options from which the user must choose. | Within commands, the vertical bar separates options. ... An ellipsis indicates a repetition of the preceding parameter. > The right angle bracket separates successive menu selections. Example: Start > Programs > DK > wdreg_install. Notices NOTE: This message denotes neutral or positive information that calls out important points to the text. A note provides information that may apply only in special cases. Atheros Communications, Incorporated 1700 Technology Drive, San Jose, CA 95110 t: 408/773-5200 f: 408/773-9940 www.atheros.com Revision History Revision Description of Changes March 2009 Initial Release Atheros Communications, Inc. • v COMPANY CONFIDENTIAL April 2011 Contents Introduction..........................................................................................................7 System Requirements....................................................................................7 Profile Management.............................................................................................7 Create or Modify a Configuration Profile....................................................7 Remove a Configuration Profile...................................................................8 Auto Profile Selection Management....................................................................8 Switching to a Different Configuration Profile..................................................9 Import and Export Profiles...................................................................................9 Importing a Profile................................................................................................9 Exporting a Profile................................................................................................9 TCP/IP Configuration.........................................................................................9 Configuring the TCP/IP Address for the network device:..................................9 General Tab.........................................................................................................10 Advanced Tab.....................................................................................................10 Security Tab........................................................................................................11 Using EAP-TLS Security........................................…

Text truncated - open the document above for the full version.

Page 1 of 9 Atheros Modular Certification Instructions to OEM Integrators FCC ID: PPD-ARS263SB April 11, 2011 Page 2 of 9 © 2000–2009 by Atheros Communications, Inc. All rights reserved. Atheros®, Atheros Driven®, Atheros XR®, Driving the Wireless Future®, ROCm®, Super AG®, Super G®, Total 802.11n®, and Wake on Wireless ® are registered by Atheros Communications, Inc. Atheros SST™, Signal-Sustain Technology™, the Air is Cleaner at 5-GHz™, XSPAN™, Wireless Future. Unleashed Now.™, and 5-UP™ are trademarks of Atheros Communications, Inc. The Atheros logo is a registered trademark of Atheros Communications, Inc. All other trademarks are the property of their respective holders. Notice The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice, and Atheros Communications, Inc. (Atheros) assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any updates. Atheros reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Atheros does not represent that products described herein are free from patent infringement or from any other third party right. No part of this document may be reproduced, adapted or transmitted in any form or by any means, electronic or mechanical, for any purpose, except as expressly set forth in a written agreement signed by Atheros. Atheros or its affiliates may have patents or pending patent applications, trademarks, copyrights, maskwork rights or other intellectual property rights that apply to the ideas, material and information expressed herein. No license to such rights is provided except as expressly set forth in a written agreement signed by Atheros. ATHEROS MAKES NO WARRANTIES OF ANY KIND WITH REGARD TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT SHALL ATHEROS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL SPECULATORY OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. IN PARTICULAR, ATHEROS SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA TRANSMITTED OR OTHERWISE USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE OR DATA. ATHEROS SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE AS THEY MIGHT OTHERWISE APPLY TO THIS DOCUMENT AND TO THE IDEAS, MATERIAL AND INFORMATION EXPRESSED HEREIN. Page 3 of 9 Revision History Revision Revision Description of Changes March. 11, 2011 Initial release Page 4 of 9 Introduction This document describes mandatory steps required by the OEM integrator when designing and manufacturing any host PC system utilizing this Atheros radio module. Also refer to the Atheros Regulatory Compliance Guide available on the Atheros customer support site and from the Atheros customer support contact person. This document lists the mandatory responsibilities and actions of the OEM integrator. Failure to comply with all requirements and conditions in this document may result in non-compliance of the host PC with FCC rules and invalidate the Atheros FCC certification for the module. This guide applies to this Client modules that act under control of an Access Point. Page 5 of 9 Max. average output power at antenna terminal 802.11b Channel Frequency(MHz) Conducted Average power (dBm) CH1 2412 17.2 CH6 2437 17.3 CH11 2462 17.2 802.11g Channel Frequency(MHz) CH1 2412 11.9 CH6 2437 17.1 CH11 2462 12.5 802.11n HT20 Channel Frequency(MHz) CH1 2412 10.8 CH6 2437 16.2 CH11 2462 11.4 Allowed Antennas to be used with the Radio Module The Integrator must request from Atheros sales or regulatory contact person the current list of allowable antennas for use with the specific radio module. This information is not available on the public FCC database but will be provided by Atheros. Atheros will provide a table of antenna type(s) models, cable lengths, and peak gain in each band. Generally, the list will include Omni-directional Inverted-F (PIFA) and stamped metal/film antennas for use inside laptops. In some cases, dipole antenna types may be included in the available list. Peak gain including cable losses are quoted in the table provided by Atheros. Use of any of the antennas in the list (identical or equivalent antenna with lower gain, dimensions and cable lengths) is acceptable in the host device, without any further FCC testing or submission. However, use of an antenna that is higher gain than those on the list or is a Different Type, requires additional testing and submission to the FCC. Therefore, antennas with higher gain or different type than specified by Atheros may not be used with the Atheros module until new testing and reporting is completed. You must contact the Atheros Regulatory Group to report any higher gain or new antenna type to be used with the module. Antenna Placement This1x180211b/g/nmodulehasbeencertifiedbyFCCassinglemoduleapprovalwiththe followingrestrictions: • Themostconservativeantenna!to!userseparationdistanceshallbegreaterthan0.6cm toenduserornear!byperson.0.6cmphysicalseparationdistanceismeasuredby positioningthedisplaysectionofnotebook/Netbook/Laptopcomputersperpendicular tothekeyboardsection.Measurethedistancefromthenearestpointofantennatothe bottomofhost. • ConsultwithAtherostodeterminetheallowablerotationalorientationsforverticaland horizontalantennainstallationinapplicablehostdevices. Page 6 of 9 • Whenantennaisinstalledinthetypicalnotebook/Netbook/laptopcomputerplatform, theantennacableshallbepositionedawayfromantennaelementstoconformto confi…

Text truncated - open the document above for the full version.

J QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 www.qualcomm.com June 15, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Authorization of Handling FCC Regulatory Applications To Whom It May Concern: I, hereby, authorize Mr. Michael Green, to handle FCC Regulatory related applications for QUALCOMM ATHEROS Incorporated and sign all required application documents. Best Regards, Paul Guckian VP, Engineering QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121 Office: 858-651-1547 [email protected]

SPORTON INTERNATIONAL INC. Page Number : 1 of 31 TEL : 886-3-327-3456 Report Issued Date : Jul. 01, 2011 FAX : 886-3-328-4978 Report Version : Rev. 03 FCC ID : PPD-ARS263SB IC : 4104A-ARS263SB FCC/IC SAR Test Report Report No. : FA132413-01 FCC/IC SAR Test Report APPLICANT : Qualcomm Atheros, Inc. EQUIPMENT : 1x1 802.11b/g/n +BT SDIO-WLAN/USB-BT Card BRAND NAME : Atheros MODEL NAME : ARS263-SB FCC ID : PPD-ARS263SB IC : 4104A-ARS263SB STANDARD : IC RSS-102 Issue 4 (2010) FCC 47 CFR Part 2 (2.1093) IEEE C95.1-1991 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product was received on Mar. 31, 2011 and completely tested on Apr. 29, 2011. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Roy Wu / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 31 TEL : 886-3-327-3456 Report Issued Date : Jul. 01, 2011 FAX : 886-3-328-4978 Report Version : Rev. 03 FCC ID : PPD-ARS263SB IC : 4104A-ARS263SB FCC/IC SAR Test Report Report No. : FA132413-01 Table of Contents Revision History ................................................................................................................................................................ 3 1. Statement of Compliance .......................................................................................................................................... 4 2. Administration Data ................................................................................................................................................... 5 2.1 Testing Laboratory ............................................................................................................................................ 5 2.2 Applicant ........................................................................................................................................................... 5 2.3 Manufacturer .................................................................................................................................................... 5 2.4 Application Details ............................................................................................................................................ 5 3. General Information ................................................................................................................................................... 6 3.1 Description of Device Under Test (DUT) ........................................................................................................... 6 3.2 Antenna Information ......................................................................................................................................... 6 3.3 Product Photos ................................................................................................................................................. 6 3.4 Applied Standards ............................................................................................................................................ 7 3.5 Device Category and SAR Limits ..................................................................................................................... 7 3.6 Test Conditions ................................................................................................................................................. 7 3.6.1 Ambient Condition .................................................................................................................................. 7 3.6.2 Test Configuration ................................................................................................................................... 7 4. Specific Absorption Rate (SAR) ................................................................................................................................ 8 4.1 Introduction ....................................................................................................................................................... 8 4.2 SAR Definition .................................................................................................................................................. 8 5. SAR Measurement System ........................................................................................................................................ 9 5.1 E-Field Probe...................................................................................................................................................10 5.1.1 E-Field Probe Specification ...................................................................................................................10 5.1.2 E-Field Probe Calibration ....................................................................................................................... 11 5.2 Data Acquisition Electronics (DAE) .................................................................................................................. 11 5.3 Robot ............................................................................................................................................................... 11 5.4 Measurement Server .......................................................................................................................................12 5.5 Phantom ..........................................................................................................................................................13 5.6 Device Holder .........................................................…

Text truncated - open the document above for the full version.

Report No.: RF110309E06A-1 R2 1 Report Format Version 4.0.0 Reference No.:110310E06 Cancels and replaces the report No.: RF110309E06A-1 R1 dated May 24, 2011 FCC TEST REPORT REPORT NO.: RF110309E06A-1 R2 MODEL NO.: ARS263-SB FCC ID: PPD-ARS263SB IC ID: 4104A-ARS263SB RECEIVED: Mar. 09, 2011 TESTED: Mar. 24 to Apr. 07, 2011 ISSUED: June 24, 2011 APPLICANT: Qualcomm Atheros, Inc. ADDRESS: 1700 Technology Drive, San Jose, CA 95110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No.49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 132 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110309E06A-1 R2 2 Report Format Version 4.0.0 Reference No.:110310E06 Cancels and replaces the report No.: RF110309E06A-1 R1 dated May 24, 2011 TABLE OF CONTENTS RELEASE CONTROL RECORD............................................................................................5 1 CERTIFICATION.....................................................................................................6 2 SUMMARY OF TEST RESULTS..............................................................................7 2.1 ME ASUREMENT UNCERTAINTY..........................................................................8 3 GENERAL INFORMATION......................................................................................9 3.1 GENERAL DESCRIPTION OF EUT........................................................................9 3.2 DESCRIPTION OF ANTENNA...............................................................................11 3.3 DESCRIPTION OF TEST MODES........................................................................12 3.4 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL:.........................13 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS........................................16 3.6 DESCRIPTION OF SUPPORT UNITS...................................................................17 3.7 CONFIGURATION OF SYSTEM UNDER TEST....................................................18 4 TEST PROCEDURES AND RESULTS..................................................................19 4.1 CONDUCTED EMISSION MEASUREMENT.........................................................19 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT.......................................19 4.1.2 TEST INSTRUMENTS...........................................................................................19 4.1.3 TEST PROCEDURES...........................................................................................20 4.1.4 TEST SETUP........................................................................................................20 4.1.5 EUT OPERATING CONDITIONS...........................................................................21 4.1.6 TEST RESULTS....................................................................................................22 4.2 NUMBER OF HOPPING FREQUENCY USED......................................................24 4.2.1 LIMIT OF HOPPING FREQUENCY USED............................................................24 4.2.2 TEST INSTRUMENTS...........................................................................................24 4.2.3 TEST PROCEDURES...........................................................................................24 4.2.4 DEVIATION FROM TEST STANDARD..................................................................24 4.2.5 TEST SETUP........................................................................................................25 4.2.6 TEST RESULTS....................................................................................................25 4.3 DWELL TIME ON EACH CHANNEL......................................................................30 4.3.1 LIMIT OF DWELL TIME USED..............................................................................30 4.3.2 TEST INSTRUMENTS...........................................................................................30 4.3.3 TEST PROCEDURES...........................................................................................31 4.3.4 DEVIATION FROM TEST STANDARD..................................................................31 4.3.5 TEST SETUP........................................................................................................31 4.3.6 TEST RESULTS....................................................................................................32 4.4 CHANNEL BANDWIDTH.......................................................................................46 4.4.1 LIMITS OF CHANNEL BANDWIDTH.....................................................................46 4.4.2 TEST INSTRUMENTS...........................................................................................46 4.4.3 TEST PROCEDURE..............................................................................................46 4.4.4 DEVIATION FROM TEST STANDARD..................................................................46 4.4.5 TEST SETUP........................................................................................................47 4.4.6 EUT OPERATING CONDITION.............................................................................47 Report No.: RF110309E06A-1 R2 3 Report Format Version 4.0.0 Reference No.:110310E06 Cancels and replaces the rep…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : D1 of D1 TEL : 886-3-327-3456 Report Issued Date : Jun. 27, 2011 FAX : 886-3-328-4978 Report Version : Rev. 03 FCC ID : PPD-ARS263SB IC : 4104A-ARS263SB FCC/IC SAR Test Report Report No. : FA132413-01 Appendix D. Product Photos Bluetooth WLAN SPORTON INTERNATIONAL INC. Page Number : E1 of E1 TEL : 886-3-327-3456 Report Issued Date : Jun. 27, 2011 FAX : 886-3-328-4978 Report Version : Rev. 03 FCC ID : PPD-ARS263SB IC : 4104A-ARS263SB FCC/IC SAR Test Report Report No. : FA132413-01 Appendix E. Test Setup Photos Horizontal Up with Phantom 0.6 cm Gap Horizontal Down with Phantom 0.6 cm Gap Vertical Up with Phantom 0.6 cm Gap Vertical Down with Phantom 0.6 cm Gap

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST 3