PPD-CUS227802.11a/b/g/n 2x2 WLAN card

Confidential and Proprietary - Qualcomm Atheros, Inc. Not to be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of Qualcomm Atheros, Inc. QUALCOMM is registered trademark of Qualcomm Incorporated. ATHEROS is a registered trademark of Qualcomm Atheros, Inc. Any other registered and unregistered trademarks are the property of Qualcomm Incorporated, Qualcomm Atheros, Inc. or their respective owners and used with permission. Registered marks owned by Qualcomm Incorporated and Qualcomm Atheros, Inc. are registered in the United States of America and may be registered in other countries. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Atheros, Inc. 1700 Technology Drive San Jose, CA 95110-1383 U.S.A. Copyright © 2011 Qualcomm Atheros, Inc. All rights reserved. CUS227 Modular Certification OEM Integrator Instructions MKG-17218 Ver. 1.1 June 19, 2013 MKG-17218 Ver. 1.1 2 Confidential and Proprietary - Qualcomm Atheros, Inc. MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description Ver. 1.1 June 2013 Initial release NOTE: The Qualcomm Atheros (QCA) reference design radio module (the “Module”) is designed for use only in specific countries in which QCA has obtained certificates of compliance with local laws and regulations. Therefore, the Module may not be sold, operated or incorporated into products for use in countries for which it has not been certified. See Section 3 herein. In addition, any deviation from the settings, methods, conditions and restrictions for integration of the Module into a host system, as detailed in this document, could be a violation of applicable national law and may be punishable as such, and in such event, the products into which the Module is incorporated may not be lawfully distributed or sold in such countries. QCA assumes no responsibility for any liability or loss related to installation, integration or operation of the Module. CUS227 Modular Certification OEM Integrator Instructions MKG-17218 Ver. 1.1 3 Confidential and Proprietary - Qualcomm Atheros, Inc. MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Contents 1 Introduction ...................................................................................................... 4 2 Applicable Module ........................................................................................... 4 3 Available Global Modular Approvals from Qualcomm Atheros .................. 5 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator ........................................................................... 5 5 Compliant/Allowable Tx Power Settings Programmed into EEPROM ........ 7 6 Allowable Antennas For Use With The Radio Module .................................. 7 7 Antenna Placement inside the Host System and RF Safety ........................ 8 8 Simultaneous Transmission with Other Integrated or Plug-In Radios ....... 8 9 Module May Not Be Installed by End Users .................................................. 9 10 Required Labeling on the Outside of the Host .......................................... 10 10.1 FCC ........................................................................................................................... 10 10.2 Taiwan NCC ............................................................................................................. 10 10.3 European Community R&TTE ................................................................................. 11 11 Required Labeling on the Module .............................................................. 12 11.1 FCC labeling on the Module ..................................................................................... 12 11.2 Rest of world labeling on the Module ....................................................................... 12 11.3 Instructions to download the sample global label artwork with certification IDs .... 12 12 Required Regulatory Wording for User Manual/Installation Manual ....... 13 12.1 FCC compliance information .................................................................................... 13 12.2 Industry Canada notice ............................................................................................. 14 12.3 European Community (R&TTE) user manual wording and declaration .................. 15 12.4 European Community (R&TTE) Declaration of Conformity for System................. 17 12.5 Taiwan user manual wording .................................................................................... 17 12.6 Korea user manual wording ...................................................................................... 18 13 OEM Integrator Checklist ............................................................................ 19 CUS227 Modular Certification OEM Integrator Instructions MKG-17218 Ver. 1.1 4 Confidential and Proprietary - Qualcomm Atheros, Inc. MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Introduction This document describes the steps that the OEM integrator must follow when designing and manufacturing a system utilizing a Qualcomm Atheros (QCA) reference design radio module (the “Module”). Failure to follow the instructions in this document may invalidate the FCC certification and authorization of the Module for use in the U.S. and in other countries. The Qualcomm Atheros modular certifications described in this document apply only to radio conformance for the Module. The OEM integrator is responsible for all system-level EMI/EMC and Product Safety testing and certification that apply to the host system in the U.S. and other countries where the system will be marketed or sold. 2 Applicable Module  Part Number: CUS227  FCC ID: PPD-CUS227 IC: 41…

Text truncated - open the document above for the full version.

CUS227 Product name： 802.11a/b/g/n 2x2 WLAN card © 2000–2013 by Qualcomm Atheros, Inc.. All rights reserved. Atheros ® , Atheros Driven ® , Atheros XR ® , Driving the Wireless Future ® , ROCm ® , Super AG ® , Super G ® , Total 802.11n ® , and Wake on Wireless ® are registered by Qualcomm Atheros, Inc. Atheros SST™, Signal- Sustain Technology™, the Air is Cleaner at 5-GHz™, XSPAN™, Wireless Future. Unleashed Now.™, and 5-UP™ are trademarks of Qualcomm Atheros, Inc.The Atheros logo is a registered trademark of Qualcomm Atheros, Inc. All other trademarks are the property of their respective holders. Notice The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice, and Qualcomm Atheros, Inc. (Atheros) assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any updates. Atheros reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Atheros does not represent that products described herein are free from patent infringement or from any other third party right. No part of this document may be reproduced, adapted or transmitted in any form or by any means, electronic or mechanical, for any purpose, except as expressly set forth in a written agreement signed by Atheros. Atheros or its affiliates may have patents or pending patent applications, trademarks, copyrights, maskwork rights or other intellectual property rights that apply to the ideas, material and information expressed herein. No license to such rights is provided except as expressly set forth in a written agreement signed by Atheros. ATHEROS MAKES NO WARRANTIES OF ANY KIND WITH REGARD TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT SHALL ATHEROS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL SPECULATORY OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. IN PARTICULAR, ATHEROS SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA TRANSMITTED OR OTHERWISE USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE OR DATA. ATHEROS SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE AS THEY MIGHT OTHERWISE APPLY TO THIS DOCUMENT AND TO THE IDEAS, MATERIAL AND INFORMATION EXPRESSED HEREIN. Qualcomm Atheros, Inc. • iii COMPANY CONFIDENTIAL April 2013 Document Conventions Text Conventions bold Bold type within paragraph text indicates commands, file names, directory names, paths, output, or returned values. Example: The DK_Client package will not function unless you use the wdreg_install batch file. italic Within commands, italics indicate a variable that the user must specify. Example: mem_alloc size_in_bytes Titles of manuals or other published documents are also set in italics. Courier The Courier font indicates output or display. Example: Error:Unable to allocate memory for transfer! Menu The Menu character tag is used for menu items. Example: Choose Edit > Copy. [ ] Within commands, items enclosed in square brackets are optional parameters or values that the user can choose to specify or omit. { } Within commands, items enclosed in braces are options from which the user must choose. | Within commands, the vertical bar separates options. ... An ellipsis indicates a repetition of the preceding parameter. > The right angle bracket separates successive menu selections. Example: Start > Programs > DK > wdreg_install. Notices NOTE: This message denotes neutral or positive information that calls out important points to the text. A note provides information that may apply only in special cases. Qualcomm Atheros, Inc. 1700 Technology Drive, San Jose, CA 95110 t: 408/773-5200 f: 408/773-9940 Revision History Revision Description of Changes March 2009 Initial Release Qualcomm Atheros, Inc. • v COMPANY CONFIDENTIAL April 2013 Contents Introduction ............................................................................................................... 7 System Requirements ........................................................................................ 7 Profile Management ................................................................................................. 7 Create or Modify a Configuration Profile ....................................................... 7 Remove a Configuration Profile ....................................................................... 8 Auto Profile Selection Management ....................................................................... 8 Switching to a Different Configuration Profile ..................................................... 9 Import and Export Profiles ....................................................................................... 9 Importing a Profile ..................................................................................................... 9 Exporting a Profile ..................................................................................................... 9 TCP/IP Configuration .............................................................................................. 9 Configuring the TCP/IP Address for the network device: .................................... 9 General Tab .............................................................................................................. 10 Advanced Tab .......................................................................................................... 10 Security Tab ............................................................................................................. 11 Using EAP-TLS Security .......................................…

Text truncated - open the document above for the full version.

QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com Date:2013/6/24 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: PPD-CUS227 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Theory of Operation Addendum - Regulatory algorithms Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to DA 04-1705 of the Commission’s Rules, we request short-term confidential treatment for the following information until Oct 1 st 2013 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External Photos Internal Photos Test Setup Photos User Manual Integrator Instruction It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards --------------------------------------------------------------------------- Michael Green / Manager, Global Product Compliance

QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com 2013/6/24 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: PPD-CUS227 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Block Diagram Schematics Theory of Operation Theory of Operation Addendum - Regulatory algorithms The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Michael Green / Manager, Global Product Compliance

QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com Power of Attorney 2013/6/24 To whom it may concern: We, the undersigned Qualcomm Atheros, Inc. hereby authorize Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15 approval and any communication needed with the national authority. Any and all acts carried out by BVCPS on our behalf shall have the same effects as acts of our own. This authorization is limited to the following products： FCC ID: PPD-CUS227 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, --------------------------------------------------------------------------- Michael Green / Manager, Global Product Compliance

FCC ID: PPD-CUS227 Report No. : RF130221E04 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch July 2, 2013 Dear Application Examiner, Qualcomm Atheros, Inc., It’s a 802.11a/b/g/n 2x2 WLAN card, FCC ID: PPD-CUS227, would like to have your authorization as a modular approval. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip AR9344. 3. “The modular transmitter must have its own power supply regulation part no.: AR9344. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration”. The EUT is tested in a stand-alone configuration via an extender. Please see section Photographs of Test Configuration in the test report. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: PPD-CUS227 Report No. : RF130221E04 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Hank Chung Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Report No.: 130221E04 Page 1 CONSTRUCTION PHOTOS OF EUT

DimensionDiagram:4cm(W)*3cm(L)

Report No.: 130221E04 Page 2 Report No.: 130221E04 Page 3

Report No.: SA130221E04 R1 1 of 9 Report Format Version 5.0.0 Cancels and replaces the report No.: SA130221E04 dated June 14, 2013 RF EXPOSURE REPORT REPORT NO.: SA130221E04 R1 MODEL NO.: CUS227 FCC ID: PPD-CUS227 IC: 4104A-CUS227 RECEIVED: Feb. 21, 2013 TESTED: Apr. 11, 2013 ISSUED: June 26, 2013 APPLICANT: Qualcomm Atheros, Inc. ADDRESS: 1700 Technology Drive, San Jose, CA 95110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA130221E04 R1 2 of 9 Report Format Version 5.0.0 Cancels and replaces the report No.: SA130221E04 dated June 14, 2013 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN....................................................................................................... 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 7 Report No.: SA130221E04 R1 3 of 9 Report Format Version 5.0.0 Cancels and replaces the report No.: SA130221E04 dated June 14, 2013 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130221E04 Original release June 14, 2013 SA130221E04 R1 Modify the antenna gain of EUT June 26, 2013 Report No.: SA130221E04 R1 4 of 9 Report Format Version 5.0.0 Cancels and replaces the report No.: SA130221E04 dated June 14, 2013 1. CERTIFICATION PRODUCT: 802.11a/b/g/n 2x2 WLAN card BRAND NAME: Qualcomm Atheros MODEL NO.: CUS227 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Qualcomm Atheros, Inc. STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: CUS227) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Apr. 01, 2013 ( Midoli Peng, Specialist ) APPROVED BY : , DATE: Apr. 01, 2013 ( May Chen, Manager ) Report No.: SA130221E04 R1 5 of 9 Report Format Version 5.0.0 Cancels and replaces the report No.: SA130221E04 dated June 14, 2013 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130221E04 R1 6 of 9 Report Format Version 5.0.0 Cancels and replaces the report No.: SA130221E04 dated June 14, 2013 5. ANTENNA GAIN The antenna provided to the EUT, please refer to the following table: Brand Model Antenna Type Antenna gain 2.4G(dBi) Antenna gain 5G(dBi) Connector Type Qualcomm CUS227 V03-2 Integrated PCB antenna 2 3 NA Note: 1. The EUT incorporates beam forming function 1.Above antenna gains of antenna are Total (H+V). Report No.: SA130221E04 R1 7 of 9 Report Format Version 5.0.0 Cancels and replaces the report No.: SA130221E04 dated June 14, 2013 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For 2.4GHz: 802.11b FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 121.264 5.01 20 0.07646 1.00 NOTE: Directional gain = 10 log[(10 G1/20 + 10 G2/20 ) 2 / 2] = 5.01dBi 802.11g FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSI…

Text truncated - open the document above for the full version.

Report No.: FC130221E04 1 of 26 Report Format Version 5.0.1 FCC DoC TEST REPORT REPORT NO. : FC130221E04 MODEL NO. : CUS227 RECEIVED : Feb. 21, 2013 TESTED : Mar. 12 to 15, 2013 ISSUED : June 14, 2013 APPLICANT : Qualcomm Atheros, Inc. ADDRESS : 1700 Technology Drive, San Jose, CA 95110 ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: FC130221E04 2 of 26 Report Format Version 5.0.1 Table of Contents RELEASE CONTROL RECORD................................................................................. 3 1 CERTIFICATION ............................................................................................. 4 2 SUMMARY OF TEST RESULTS ..................................................................... 5 2.1 MEASUREMENT UNCERTAINTY .................................................................. 5 3 GENERAL INFORMATION ............................................................................. 6 3.1 GENERAL DESCRIPTION OF EUT ................................................................ 6 3.2 ANTENNA SPECIFICATIONS ......................................................................... 7 3.3 GENERAL DESCRIPTION OF TEST MODE .................................................. 8 3.4 DESCRIPTION OF SUPPORT UNITS ............................................................ 9 3.5 CONFIGURATION OF SYSTEM UNDER TEST ........................................... 10 4 EMISSION TEST............................................................................................11 4.1 CONDUCTED EMISSION MEASUREMENT .................................................11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...............................11 4.1.2 TEST INSTRUMENTS ...................................................................................11 4.1.3 TEST PROCEDURE ..................................................................................... 12 4.1.4 DEVIATION FROM TEST STANDARD ......................................................... 12 4.1.5 TEST SETUP ................................................................................................ 12 4.1.6 EUT OPERATING CONDITIONS .................................................................. 13 4.1.7 TEST RESULTS ............................................................................................ 14 4.2 RADIATED EMISSION MEASUREMENT ..................................................... 16 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................... 16 4.2.2 TEST INSTRUMENTS .................................................................................. 18 4.2.3 TEST PROCEDURE ..................................................................................... 19 4.2.4 DEVIATION FROM TEST STANDARD ......................................................... 19 4.2.5 TEST SETUP ................................................................................................ 20 4.2.6 EUT OPERATING CONDITIONS .................................................................. 20 4.2.7 TEST RESULTS ............................................................................................ 21 5 INFORMATION ON THE TESTING LABORATORIES .................................. 25 6 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ......................................................... 26 Report No.: FC130221E04 3 of 26 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FC130221E04 Original release June 14, 2013 Report No.: FC130221E04 4 of 26 Report Format Version 5.0.1 1 CERTIFICATION PRODUCT : 802.11a/b/g/n 2x2 WLAN card BRAND NAME : Qualcomm Atheros MODEL NO. : CUS227 TEST SAMPLE : ENGINEERING SAMPLE APPLICANT : Qualcomm Atheros, Inc. TESTED : Mar. 12 to 15, 2013 STANDARDS : FCC Part 15, Subpart B, Class B ICES-003: 2012 Issue 5, Class B ANSI C63.4-2009 The above equipment (Model: CUS227) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record…

Text truncated - open the document above for the full version.