Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 4 | 15E | 5.75 GHz - 5.83 GHz | 146.10 mW |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesOutput power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands.
The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.51W/kg and 0.61W/kg, respectively.
